trex_multistream: Add multistream support to T-Rexopnfv-5.1.0opnfv-5.0.RC1opnfv-5.0.0stable/euphrates

Adds incremental source multi-stream functionality to
T-Rex traffic generator code in VSPerf.

JIRA: VSPERF-532

Change-Id: Ib5ba326699d89350ac1715c9a4276e5fa46a133e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
(cherry picked from commit d4054052bdc6d9417e27f81f2434bcf1f2149972)

1 files changed, 41 insertions, 2 deletions

diff --git a/tools/pkt_gen/trex/trex.py b/tools/pkt_gen/trex/trex.py
index 7b554ecb..abae35dc 100644
--- a/tools/pkt_gen/trex/trex.py
+++ b/tools/pkt_gen/trex/trex.py
@@ -21,6 +21,7 @@ import subprocess
 import sys
 from collections import OrderedDict
 # pylint: disable=unused-import
+import netaddr
 import zmq
 from conf import settings
 from conf import merge_spec
@@ -174,8 +175,46 @@ class Trex(ITrafficGenerator):
         fsize_no_fcs = frame_size - 4
         payload_a = max(0, fsize_no_fcs - len(base_pkt_a)) * 'x'
         payload_b = max(0, fsize_no_fcs - len(base_pkt_b)) * 'x'
-        pkt_a = STLPktBuilder(pkt=base_pkt_a/payload_a)
-        pkt_b = STLPktBuilder(pkt=base_pkt_b/payload_b)
+
+        # Multistream configuration, increments source values only
+        ms_mod = list() # mod list for incrementing values to be populated based on layer
+        if traffic['multistream'] > 1:
+            if traffic['stream_type'].upper() == 'L2':
+                for _ in [base_pkt_a, base_pkt_b]:
+                    ms_mod += [STLVmFlowVar(name="mac_start", min_value=0,
+                                            max_value=traffic['multistream'] - 1, size=4, op="inc"),
+                               STLVmWrFlowVar(fv_name="mac_start", pkt_offset=7)]
+            elif traffic['stream_type'].upper() == 'L3':
+                ip_src = {"start": int(netaddr.IPAddress(traffic['l3']['srcip'])),
+                          "end": int(netaddr.IPAddress(traffic['l3']['srcip'])) + traffic['multistream'] - 1}
+                ip_dst = {"start": int(netaddr.IPAddress(traffic['l3']['dstip'])),
+                          "end": int(netaddr.IPAddress(traffic['l3']['dstip'])) + traffic['multistream'] - 1}
+                for ip_address in [ip_src, ip_dst]:
+                    ms_mod += [STLVmFlowVar(name="ip_src", min_value=ip_address['start'],
+                                            max_value=ip_address['end'], size=4, op="inc"),
+                               STLVmWrFlowVar(fv_name="ip_src", pkt_offset="IP.src")]
+            elif traffic['stream_type'].upper() == 'L4':
+                for udpport in [traffic['l4']['srcport'], traffic['l4']['dstport']]:
+                    if udpport + (traffic['multistream'] - 1) > 65535:
+                        start_port = udpport
+                        # find the max/min port number based on the loop around of 65535 to 0 if needed
+                        minimum_value = 65535 - (traffic['multistream'] -1)
+                        maximum_value = 65535
+                    else:
+                        start_port, minimum_value = udpport, udpport
+                        maximum_value = start_port + (traffic['multistream'] - 1)
+                    ms_mod += [STLVmFlowVar(name="port_src", init_value=start_port,
+                                            min_value=minimum_value, max_value=maximum_value,
+                                            size=2, op="inc"),
+                               STLVmWrFlowVar(fv_name="port_src", pkt_offset="UDP.sport"),]
+
+        if ms_mod: # multistream detected
+            pkt_a = STLPktBuilder(pkt=base_pkt_a/payload_a, vm=[ms_mod[0], ms_mod[1]])
+            pkt_b = STLPktBuilder(pkt=base_pkt_b/payload_b, vm=[ms_mod[2], ms_mod[3]])
+        else:
+            pkt_a = STLPktBuilder(pkt=base_pkt_a / payload_a)
+            pkt_b = STLPktBuilder(pkt=base_pkt_b / payload_b)
+
         stream_1 = STLStream(packet=pkt_a,
                              name='stream_1',
                              mode=STLTXCont(percentage=traffic['frame_rate']))