aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorMartin Klozik <martinx.klozik@intel.com>2016-12-14 14:02:43 +0000
committerMartin Klozik <martinx.klozik@intel.com>2017-01-16 08:50:02 +0000
commit4481df385ac03ece015ccb429201f96189dc5ae2 (patch)
treea959a804e7b1efd663dbb24a447609421e339211 /docs
parentcafcb9f24b422a4b3a0b19ba00c83fe2819dcbaa (diff)
traffic: Configurable traffic details
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
Diffstat (limited to 'docs')
-rw-r--r--docs/configguide/trafficgen.rst17
-rw-r--r--docs/design/trafficgen_integration_guide.rst20
-rwxr-xr-xdocs/design/vswitchperf_design.rst124
-rwxr-xr-xdocs/userguide/integration.rst10
-rw-r--r--docs/userguide/teststeps.rst26
-rwxr-xr-xdocs/userguide/testusage.rst31
-rwxr-xr-xdocs/userguide/yardstick.rst29
7 files changed, 186 insertions, 71 deletions
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index 6d75a56f..e1eaf9f3 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -28,20 +28,27 @@ and configure the various traffic generators.
Background Information
----------------------
-The traffic default configuration can be found in
-tools/pkt_gen/trafficgen/trafficgenhelper.py, and is configured as
-follows:
+The traffic default configuration can be found in **conf/03_traffic.conf**,
+and is configured as follows:
.. code-block:: console
- TRAFFIC_DEFAULTS = {
+ TRAFFIC = {
+ 'traffic_type' : 'rfc2544_throughput',
+ 'frame_rate' : 100,
+ 'bidir' : 'True', # will be passed as string in title format to tgen
+ 'multistream' : 0,
+ 'stream_type' : 'L4',
+ 'pre_installed_flows' : 'No', # used by vswitch implementation
+ 'flow_type' : 'port', # used by vswitch implementation
+
'l2': {
'framesize': 64,
'srcmac': '00:00:00:00:00:00',
'dstmac': '00:00:00:00:00:00',
},
'l3': {
- 'proto': 'tcp',
+ 'proto': 'udp',
'srcip': '1.1.1.1',
'dstip': '90.90.90.90',
},
diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst
index 9bb0e825..1457052b 100644
--- a/docs/design/trafficgen_integration_guide.rst
+++ b/docs/design/trafficgen_integration_guide.rst
@@ -81,29 +81,28 @@ Step 3 - configuration
All configuration values, required for correct traffic generator function, are passed
from VSPERF to the traffic generator in a dictionary. Default values shared among
-all traffic generators are defined in **tools/pkt_gen/trafficgen/trafficgenhelper.py**
-as **TRAFFIC_DEFAULTS** dictionary. Default values are loaded by **ITrafficGenerator**
-interface class automatically, so it is not needed to load them explicitly. In case
-that there are any traffic generator specific default values, then they should
-be set within class specific **__init__** function.
+all traffic generators are defined in **conf/03_traffic.conf** within **TRAFFIC**
+dictionary. Default values are loaded by **ITrafficGenerator** interface class
+automatically, so it is not needed to load them explicitly. In case that there are
+any traffic generator specific default values, then they should be set within class
+specific **__init__** function.
VSPERF passes test specific configuration within **traffic** dictionary to every
start and send function. So implementation of these functions must ensure,
that default values are updated with the testcase specific values. Proper merge
-of values is assured by call of **merge_spec** function from **trafficgenhelper**
-module.
+of values is assured by call of **merge_spec** function from **conf** module.
Example of **merge_spec** usage in **tools/pkt_gen/sample_tg/sample_tg.py** module:
.. code-block:: python
- from tools.pkt_gen.trafficgen.trafficgenhelper import merge_spec
+ from conf import merge_spec
def start_rfc2544_throughput(self, traffic=None, duration=30):
self._params = {}
self._params['traffic'] = self.traffic_defaults.copy()
if traffic:
- self._params['traffic'] = trafficgen.merge_spec(
+ self._params['traffic'] = merge_spec(
self._params['traffic'], traffic)
@@ -199,8 +198,7 @@ functions:
e.g. **rfc2544_throughput**, **rfc2544_continuous**
or **rfc2544_back2back**.
* param **frame_rate**: Defines desired percentage of frame
- rate used during continuous stream tests. It can be set by test
- parameter iLoad or by CLI parameter iload.
+ rate used during continuous stream tests.
* param **bidir**: Specifies if generated traffic will be full-duplex
(true) or half-duplex (false).
* param **multistream**: Defines number of flows simulated by traffic
diff --git a/docs/design/vswitchperf_design.rst b/docs/design/vswitchperf_design.rst
index 4f33a99f..96b97631 100755
--- a/docs/design/vswitchperf_design.rst
+++ b/docs/design/vswitchperf_design.rst
@@ -263,6 +263,130 @@ a section in the ``conf\10_custom.conf`` file that can be used.
.. _VSPERF installation scripts: http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html#other-requirements
+Configuration of TRAFFIC dictionary
+-----------------------------------
+
+TRAFFIC dictionary is used for configuration of traffic generator. Default values
+can be found in configuration file ``conf/03_traffic.conf``. These default values
+can be modified by (first option has the highest priorty):
+
+ 1. ``Parameters`` section of testcase defintion
+ 2. command line options specified by ``--test-params`` argument
+ 3. custom configuration file
+
+It is to note, that in case of option 1 and 2, it is possible to specify only
+values, which should be changed. In case of custom configuration file, it is
+required to specify whole ``TRAFFIC`` dictionary with its all values or explicitly
+call and update() method of ``TRAFFIC`` dictionary.
+
+Detailed description of ``TRAFFIC`` dictionary items follows:
+
+.. code-block:: console
+
+ 'traffic_type' - One of the supported traffic types.
+ E.g. rfc2544_throughput, rfc2544_back2back
+ or rfc2544_continuous
+ Data type: str
+ Default value: "rfc2544_throughput".
+ 'bidir' - Specifies if generated traffic will be full-duplex (True)
+ or half-duplex (False)
+ Data type: str
+ Supported values: "True", "False"
+ Default value: "False".
+ 'frame_rate' - Defines desired percentage of frame rate used during
+ continuous stream tests.
+ Data type: int
+ Default value: 100.
+ 'multistream' - Defines number of flows simulated by traffic generator.
+ Value 0 disables multistream feature
+ Data type: int
+ Supported values: 0-65535
+ Default value: 0.
+ 'stream_type' - Stream type is an extension of the "multistream" feature.
+ If multistream is disabled, then stream type will be
+ ignored. Stream type defines ISO OSI network layer used
+ for simulation of multiple streams.
+ Data type: str
+ Supported values:
+ "L2" - iteration of destination MAC address
+ "L3" - iteration of destination IP address
+ "L4" - iteration of destination port
+ of selected transport protocol
+ Default value: "L4".
+ 'pre_installed_flows'
+ - Pre-installed flows is an extension of the multistream"
+ feature. If multistream is disabled, then pre-installed
+ flows will be ignored. It defines if stream specific flows
+ will be inserted into OVS or not.
+ Data type: str
+ Supported values:
+ "Yes" - flows will be inserted into OVS
+ "No" - flows won't be inserted into OVS
+ Default value: "No".
+ 'flow_type' - Defines flows complexity.
+ Data type: str
+ Supported values:
+ "port" - flow is defined by ingress ports
+ "IP" - flow is defined by ingress ports
+ and src and dst IP addresses
+ Default value: "port"
+ 'l2' - A dictionary with l2 network layer details. Supported
+ values are:
+ 'srcmac' - Specifies source MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "00:00:00:00:00:00".
+ 'dstmac' - Specifies destination MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "00:00:00:00:00:00".
+ 'framesize' - Specifies default frame size. This value should not be
+ changed directly. It will be overridden during testcase
+ execution by values specified by list TRAFFICGEN_PKT_SIZES.
+ Data type: int
+ Default value: 64
+ 'l3' - A dictionary with l3 network layer details. Supported
+ values are:
+ 'srcip' - Specifies source MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "1.1.1.1".
+ 'dstip' - Specifies destination MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "90.90.90.90".
+ 'proto' - Specifies deflaut protocol type.
+ Please check particular traffic generator implementation
+ for supported protocol types.
+ Data type: str
+ Default value: "udp".
+ 'l4' - A dictionary with l4 network layer details. Supported
+ values are:
+ 'srcport' - Specifies source port of selected transport protocol.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: int
+ Default value: 3000
+ 'dstport' - Specifies destination port of selected transport protocol.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: int
+ Default value: 3001
+ 'vlan' - A dictionary with vlan encapsulation details. Supported
+ values are:
+ 'enabled' - Specifies if vlan encapsulation should be enabled or
+ disabled.
+ Data type: bool
+ Default value: False
+ 'id' - Specifies vlan id.
+ Data type: int (NOTE: must fit to 12 bits)
+ Default value: 0
+ 'priority' - Specifies a vlan priority (PCP header field).
+ Data type: int (NOTE: must fit to 3 bits)
+ Default value: 0
+ 'cfi' - Specifies if frames can or cannot be dropped during
+ congestion (DEI header field).
+ Data type: int (NOTE: must fit to 1 bit)
+ Default value: 0
+
Configuration of GUEST options
------------------------------
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index 003e8adb..60ed9245 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -82,21 +82,21 @@ To run VXLAN encapsulation tests:
.. code-block:: console
./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=vxlan' overlay_p2p_tput
+ --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput
To run GRE encapsulation tests:
.. code-block:: console
./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=gre' overlay_p2p_tput
+ --test-params 'TUNNEL_TYPE=gre' overlay_p2p_tput
To run GENEVE encapsulation tests:
.. code-block:: console
./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=geneve' overlay_p2p_tput
+ --test-params 'TUNNEL_TYPE=geneve' overlay_p2p_tput
To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
@@ -128,7 +128,7 @@ To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
.. code-block:: console
./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=vxlan' overlay_p2p_tput
+ --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput
Executing VXLAN decapsulation tests
@@ -189,7 +189,7 @@ To run GRE decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=gre' \
+ ./vsperf --conf-file user_settings.py --test-params 'TUNNEL_TYPE=gre' \
--integration overlay_p2p_decap_cont
diff --git a/docs/userguide/teststeps.rst b/docs/userguide/teststeps.rst
index 5e2d9570..5029f538 100644
--- a/docs/userguide/teststeps.rst
+++ b/docs/userguide/teststeps.rst
@@ -374,8 +374,12 @@ That is accomplished by using "Stream Type" and "MultiStream" keywords.
"Name": "multistream_l4",
"Description": "Multistream on UDP ports",
"Deployment": "clean",
- "Stream Type": "L4",
- "MultiStream": 4,
+ "Parameters": {
+ 'TRAFFIC' : {
+ "multistream": 4,
+ "stream_type": "L4",
+ },
+ },
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'], # STEP 0
['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
@@ -542,8 +546,12 @@ destination UDP port.
"Name": "ex_2pvp_rule_l4dp",
"Description": "2 PVP with flows on L4 Dest Port",
"Deployment": "clean",
- "Stream Type": "L4", # loop UDP ports
- "MultiStream": 2,
+ "Parameters": {
+ 'TRAFFIC' : {
+ "multistream": 2,
+ "stream_type": "L4",
+ },
+ },
"TestSteps": [
['vswitch', 'add_switch', 'int_br0'], # STEP 0
['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
@@ -622,12 +630,14 @@ and available in both csv and rst report files.
{
"Name": "pvvp_pvp_cont",
- "Traffic Type": "continuous",
"Deployment": "pvvp",
"Description": "PVVP and PVP in parallel with Continuous Stream",
- "biDirectional": "True",
- "iLoad": "100",
- "MultiStream": "2",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "multistream": 2,
+ },
+ },
"TestSteps": [
['vswitch', 'add_vport', 'br0'],
['vswitch', 'add_vport', 'br0'],
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 379618d2..9a9a23c0 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -719,36 +719,19 @@ Mode of operation is driven by configuration parameter -m or --mode
"trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission
In case, that VSPERF is executed in "trafficgen" mode, then configuration
-of traffic generator should be configured through ``--test-params`` option.
-Supported CLI options useful for traffic generator configuration are:
-
-.. code-block:: console
-
- 'traffic_type' - One of the supported traffic types. E.g.
- rfc2544_throughput,
- rfc2544_back2back or rfc2544_continuous
- Default value is "rfc2544_throughput".
- 'bidirectional' - Specifies if generated traffic will be full-duplex (true)
- or half-duplex (false)
- Default value is "false".
- 'iload' - Defines desired percentage of frame rate used during
- continuous stream tests.
- Default value is 100.
- 'multistream' - Defines number of flows simulated by traffic generator.
- Value 0 disables MultiStream feature
- Default value is 0.
- 'stream_type' - Stream Type is an extension of the "MultiStream" feature.
- If MultiStream is disabled, then Stream Type will be
- ignored. Stream Type defines ISO OSI network layer used
- for simulation of multiple streams.
- Default value is "L4".
+of traffic generator can be modified through ``TRAFFIC`` dictionary passed to the
+``--test-params`` option. It is not needed to specify all values of ``TRAFFIC``
+dictionary. It is sufficient to specify only values, which should be changed.
+Detailed description of ``TRAFFIC`` dictionary can be found at
+`Configuration of TRAFFIC dictionary
+<http://artifacts.opnfv.org/vswitchperf/docs/index.html#configuration-of-traffic-dictionary>`__
Example of execution of VSPERF in "trafficgen" mode:
.. code-block:: console
$ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \
- --test-params "traffic_type=rfc2544_continuous;bidirectional=True;iload=60"
+ --test-params "TRAFFIC={'traffic_type':'rfc2544_continuous','bidir':'False','framerate':60}"
Code change verification by pylint
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/docs/userguide/yardstick.rst b/docs/userguide/yardstick.rst
index 985a25ad..c906df8e 100755
--- a/docs/userguide/yardstick.rst
+++ b/docs/userguide/yardstick.rst
@@ -146,14 +146,10 @@ Example of yaml file:
type: Vsperf
options:
testname: 'p2p_rfc2544_throughput'
- traffic_type: 'rfc2544_throughput'
- frame_size '64'
- bidirectional: 'True'
- iload: 100
trafficgen_port1: 'eth1'
trafficgen_port2: 'eth3'
external_bridge: 'br-ex'
- test_params: 'TRAFFICGEN_DURATION=30;'
+ test_params: 'TRAFFICGEN_DURATION=30;TRAFFIC={'traffic_type':'rfc2544_throughput}'
conf_file: '~/vsperf-yardstick.conf'
host: vsperf.demo
@@ -182,19 +178,9 @@ Section **option** defines details of vswitchperf test scenario. Lot of options
are identical to the vswitchperf parameters passed through ``--test-params``
argument. Following options are supported:
-- **traffic_type** - specifies the type of traffic executed by traffic generator;
- Valid values are ``rfc2544_throughput``, ``rfc2544_continuous`` and ``rfc2544_back2back``.
- Default: ``rfc2544_throughput``
- **frame_size** - a packet size for which test should be executed;
Multiple packet sizes can be tested by modification of Sequence runner
section inside YAML definition. Default: '64'
-- **bidirectional** - specifies if traffic will be uni (False) or bi-directional
- (True); Default: False
-- **iload** - specifies frame rate; Default: 100
-- **multistream** - specifies the number of simulated streams; Default: 0 (i.e.
- multistream feature is disabled)
-- **stream_type** - specifies network layer used for multistream simulation
- the valid values are "L4", "L3" and "L2"; Default: 'L4'
- **conf_file** - sets path to the vswitchperf configuration file, which will be
uploaded to VM; Default: '~/vsperf-yardstick.conf'
- **setup_script** - sets path to the setup script, which will be executed
@@ -208,8 +194,10 @@ argument. Following options are supported:
- **test_params** - specifies a string with a list of vsperf configuration
parameters, which will be passed to the ``--test-params`` CLI argument;
Parameters should be stated in the form of ``param=value`` and separated
- by a semicolon. Please check VSPERF documentation for details about
- available configuration parameters and their data types.
+ by a semicolon. Configuration of traffic generator is driven by ``TRAFFIC``
+ dictionary, which can be also updated by values defined by ``test_params``.
+ Please check VSPERF documentation for details about available configuration
+ parameters and their data types.
In case that both **test_params** and **conf_file** are specified,
then values from **test_params** will override values defined
in the configuration file.
@@ -220,7 +208,7 @@ expected, that OVS runs at the same node, where the testcase is executed. In cas
of more complex OpenStack installation or a need of additional OVS configuration,
**setup_script** can be used.
-Note: It is essential to specify a configuration for selected traffic generator.
+**NOTE** It is essential to specify a configuration for selected traffic generator.
In case, that standalone testcase is created, then traffic generator can be
selected and configured directly in YAML file by **test_params**. On the other
hand, if multiple testcases should be executed with the same traffic generator
@@ -259,3 +247,8 @@ In case that any of defined metrics will be lower than defined value, then
testcase will be marked as failed. Based on ``action`` policy, yardstick
will either stop test execution (value ``assert``) or it will run next test
(value ``monitor``).
+
+**NOTE** The throughput SLA (or any other SLA) cannot be set to a meaningful
+value without knowledge of the server and networking environment, possibly
+including prior testing in that environment to establish a baseline SLA level
+under well-understood circumstances.