summaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorAl Morton <acmorton@att.com>2016-08-05 17:21:59 -0400
committerAl Morton <acmorton@att.com>2016-08-09 09:10:22 -0400
commiteb8a5826f242a5d48e2a2df2009afab50e5b31eb (patch)
tree282c939a56c8f1d7b44c762624801ab1c1d26dc9 /docs
parent896f0fe61346916a560c01c0eae638894d653d7e (diff)
test_spec: LTD: MatchAction Performance testing
One of the new tests we agreed by working on Etherpad was MatchAction. Maryam led the development, and many provided comments there. This is another chance for comments before we merge. JIRA: VSPERF-242 Change-Id: I9da74efb703d5f221280567159e4ed6d830eb92c Signed-off-by: Al Morton <acmorton@att.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Diffstat (limited to 'docs')
-rw-r--r--docs/requirements/vswitchperf_ltd.rst122
1 files changed, 122 insertions, 0 deletions
diff --git a/docs/requirements/vswitchperf_ltd.rst b/docs/requirements/vswitchperf_ltd.rst
index 6b882290..9e26f637 100644
--- a/docs/requirements/vswitchperf_ltd.rst
+++ b/docs/requirements/vswitchperf_ltd.rst
@@ -1947,6 +1947,128 @@ Test ID: LTD.Throughput.Overlay.Network.<tech>.RFC2544.PacketLossRatio
- CPU and memory utilization may also be collected as part of this
test, to determine the vSwitch's performance footprint on the system.
+.. 3.2.3.1.15
+
+Test ID: LTD.Throughput.RFC2544.MatchAction.PacketLossRatio
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ **Title**: RFC 2544 X% packet loss ratio match action Throughput and Latency Test
+
+ **Prerequisite Test**: LTD.Throughput.RFC2544.PacketLossRatio
+
+ **Priority**:
+
+ **Description**:
+
+ The aim of this test is to determine the cost of carrying out match
+ action(s) on the DUT’s RFC2544 Throughput with X% traffic loss for
+ a constant load (fixed length frames at a fixed interval time).
+
+ Each test case requires:
+ * selection of a specific match action(s),
+ * specifying a percentage of total traffic that is elligible
+ for the match action,
+ * determination of the specific test configuration (number
+ of flows, number of test ports, presence of an external
+ controller, etc.), and
+ * measurement of the RFC 2544 Throughput level with X% packet
+ loss: Traffic shall be bi-directional and symmetric.
+
+ Note: It would be ideal to verify that all match action-elligible
+ traffic was forwarded to the correct port, and if forwarded to
+ an unintended port it should be considered lost.
+
+ A match action is an action that is typically carried on a frame
+ or packet that matches a set of flow classification parameters
+ (typically frame/packet header fields). A match action may or may
+ not modify a packet/frame. Match actions include [1]:
+ * output : outputs a packet to a particular port.
+ * normal: Subjects the packet to traditional L2/L3 processing
+ (MAC learning).
+ * flood: Outputs the packet on all switch physical ports
+ other than the port on which it was received and any ports
+ on which flooding is disabled.
+ * all: Outputs the packet on all switch physical ports other
+ than the port on which it was received.
+ * local: Outputs the packet on the ``local port,'' which
+ corresponds to the network device that has the same name as
+ the bridge.
+ * in_port: Outputs the packet on the port from which it was
+ received.
+ * Controller: Sends the packet and its metadata to the
+ OpenFlow controller as a ``packet in'' message.
+ * enqueue: Enqueues the packet on the specified queue
+ within port.
+ * drop: discard the packet.
+
+ Modifications include [1]:
+ * mod vlan: covered by LTD.Throughput.RFC2544.PacketLossRatioFrameModification
+ * mod_dl_src: Sets the source Ethernet address.
+ * mod_dl_dst: Sets the destination Ethernet address.
+ * mod_nw_src: Sets the IPv4 source address.
+ * mod_nw_dst: Sets the IPv4 destination address.
+ * mod_tp_src: Sets the TCP or UDP or SCTP source port.
+ * mod_tp_dst: Sets the TCP or UDP or SCTP destination port.
+ * mod_nw_tos: Sets the DSCP bits in the IPv4 ToS/DSCP or
+ IPv6 traffic class field.
+ * mod_nw_ecn: Sets the ECN bits in the appropriate IPv4 or
+ IPv6 field.
+ * mod_nw_ttl: Sets the IPv4 TTL or IPv6 hop limit field.
+
+ Note: This comprehensive list requires extensive traffic generator
+ capabilities.
+
+ The match action(s) that were applied as part of the test should be
+ reported in the final test report.
+
+ During this test, the DUT must perform the following operations on
+ the traffic flow:
+ * Perform packet parsing on the DUT’s ingress port.
+ * Perform any relevant address look-ups on the DUT’s ingress
+ ports.
+ * Carry out one or more of the match actions specified above.
+
+ The default loss percentages to be tested are: - X = 0% - X = 10^-7%
+ Other values can be tested if required by the user. The selected
+ frame sizes are those previously defined under Default Test
+ Parameters.
+
+ The test can also be used to determine the average latency of the
+ traffic when a match action is applied to packets in a flow. Under
+ the RFC2544 test methodology, the test duration will include a
+ number of trials; each trial should run for a minimum period of 60
+ seconds. A binary search methodology must be applied for each
+ trial to obtain the final result.
+
+ **Expected Result:**
+
+ At the end of each trial, the presence or absence of loss
+ determines the modification of offered load for the next trial,
+ converging on a maximum rate, or RFC2544Throughput with X% loss.
+ The Throughput load is re-used in related RFC2544 tests and other
+ tests.
+
+ **Metrics Collected:**
+
+ The following are the metrics collected for this test:
+ * The RFC 2544 Throughput in Frames Per Second (FPS) and Mbps
+ of the DUT for each frame size with X% packet loss.
+ * The average latency of the traffic flow when passing through
+ the DUT (if testing for latency, note that this average is
+ different from the test specified in Section 26.3 ofRFC2544).
+ * CPU and memory utilization may also be collected as part of
+ this test, to determine the vSwitch’s performance footprint
+ on the system.
+
+ The metrics collected can be compared to that of the prerequisite
+ test to determine the cost of the match action(s) in the pipeline.
+
+ **Deployment scenario**:
+
+ - Physical → virtual switch → physical (and others are possible)
+
+ [1] ovs-ofctl - administer OpenFlow switches
+ [http://openvswitch.org/support/dist-docs/ovs-ofctl.8.txt ]
+
.. 3.2.3.2