summaryrefslogtreecommitdiffstats
path: root/docs/userguides/quickstart.rst
diff options
context:
space:
mode:
authorMaryam Tahhan <maryam.tahhan@intel.com>2015-12-02 13:42:50 +0000
committerMaryam Tahhan <maryam.tahhan@intel.com>2015-12-21 10:44:07 +0000
commitcc3a4bf85074989c28a09b7b141dea5e42701f5c (patch)
tree18740fd268ff0d631812b36eb45636489cf8b75d /docs/userguides/quickstart.rst
parentde0aaffe31e1f787cefe21a5957a07924bb5956f (diff)
docs: updates and move traffic gens to separate doc
Move the traffic gen instructions to a separate user guide and add information on usage of the Dummy traffic generator. Update docs to fix PDF build failure and do general clean-up. Removed the numbering from the LTD and added the numbered directive to automate numbering for sections and headers. Add comment anchors that reflect the section numbers. Change-Id: I984ca38456a891c439697ebc1da041bc1d828a15 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Diffstat (limited to 'docs/userguides/quickstart.rst')
-rwxr-xr-xdocs/userguides/quickstart.rst355
1 files changed, 355 insertions, 0 deletions
diff --git a/docs/userguides/quickstart.rst b/docs/userguides/quickstart.rst
new file mode 100755
index 00000000..91162f88
--- /dev/null
+++ b/docs/userguides/quickstart.rst
@@ -0,0 +1,355 @@
+=============================
+Getting Started with 'vsperf'
+=============================
+
+Hardware Requirements
+---------------------
+
+VSPERF requires one of the following traffic generators to run tests:
+
+- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA client software
+- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual in a VM) and a
+ VM to run the Spirent Virtual Deployment Service image, formerly known as "Spirent LabServer".
+
+Both test configurations, above, also require a CentOS Linux release 7.1.1503 (Core) host.
+
+vSwitch Requirements
+--------------------
+
+The vSwitch must support Open Flow 1.3 or greater.
+
+Installation
+------------
+
+Follow the `installation instructions <http://artifacts.opnfv.org/vswitchperf/docs/docs/guides/index.html>`__ to install.
+
+Traffic Generator Setup
+-----------------------
+Follow the `Traffic generator instructions <http://artifacts.opnfv.org/vswitchperf/docs/docs/guides/trafficgen.html>`__ to install and configure a suitable traffic generator.
+
+Cloning and building src dependencies
+-------------------------------------
+
+In order to run VSPERF, you will need to download DPDK and OVS. You can
+do this manually and build them in a preferred location, or you could
+use vswitchperf/src. The vswitchperf/src directory contains makefiles
+that will allow you to clone and build the libraries that VSPERF depends
+on, such as DPDK and OVS. To clone and build simply:
+
+ .. code-block:: console
+
+ cd src
+ make
+
+VSPERF can be used with OVS without DPDK support. In this case you have
+to specify path to the kernel sources by WITH\_LINUX parameter:
+
+ .. code-block:: console
+
+ cd src
+ make WITH_LINUX=/lib/modules/`uname -r`/build
+
+To build DPDK and OVS for PVP and PVVP testing with vhost_user as the guest
+access method, use:
+
+ .. code-block:: console
+
+ make VHOST_USER=y
+
+To build everything: Vanilla OVS, OVS with vhost_user as the guest access
+method and OVS with vhost_cuse access simply:
+
+ .. code-block:: console
+
+ make
+
+The vhost_user build will reside in src/ovs/
+The vhost_cuse build will reside in vswitchperf/src_cuse
+The Vanilla OVS build will reside in vswitchperf/src_vanilla
+
+To delete a src subdirectory and its contents to allow you to re-clone simply
+use:
+
+ .. code-block:: console
+
+ make clobber
+
+Configure the ``./conf/10_custom.conf`` file
+--------------------------------------------
+The ``10_custom.conf`` file is the configuration file that overrides
+default configurations in all the other configuration files in ``./conf``
+The supplied ``10_custom.conf`` file must be modified, as it contains
+configuration items for which there are no reasonable default values.
+
+The configuration items that can be added is not limited to the initial
+contents. Any configuration item mentioned in any .conf file in
+``./conf`` directory can be added and that item will be overridden by
+the custom configuration value.
+
+Using a custom settings file
+----------------------------
+
+If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory
+of if you want to use an alternative configuration file, the file can
+be passed to ``vsperf`` via the ``--conf-file`` argument.
+
+ .. code-block:: console
+
+ ./vsperf --conf-file <path_to_settings_py> ...
+
+Note that configuration passed in via the environment (``--load-env``)
+or via another command line argument will override both the default and
+your custom configuration files. This "priority hierarchy" can be
+described like so (1 = max priority):
+
+1. Command line arguments
+2. Environment variables
+3. Configuration file(s)
+
+--------------
+
+Executing tests
+---------------
+
+Before running any tests make sure you have root permissions by adding
+the following line to /etc/sudoers:
+
+ .. code-block:: console
+
+ username ALL=(ALL) NOPASSWD: ALL
+
+username in the example above should be replaced with a real username.
+
+To list the available tests:
+
+ .. code-block:: console
+
+ ./vsperf --list
+
+To run a single test:
+
+ .. code-block:: console
+
+ ./vsperf $TESTNAME
+
+Where $TESTNAME is the name of the vsperf test you would like to run.
+
+To run a group of tests, for example all tests with a name containing
+'RFC2544':
+
+ .. code-block:: console
+
+ ./vsperf --conf-file=user_settings.py --tests="RFC2544"
+
+To run all tests:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file=user_settings.py
+
+Some tests allow for configurable parameters, including test duration
+(in seconds) as well as packet sizes (in bytes).
+
+.. code:: bash
+
+ ./vsperf --conf-file user_settings.py
+ --tests RFC2544Tput
+ --test-param "duration=10;pkt_sizes=128"
+
+For all available options, check out the help dialog:
+
+ .. code-block:: console
+
+ ./vsperf --help
+
+Executing Vanilla OVS tests
+----------------------------
+If you have compiled all the variants of OVS in ''src/'' please skip
+step 1.
+
+1. Recompile src for Vanilla OVS testing
+
+ .. code-block:: console
+
+ cd src
+ make cleanse
+ make WITH_LINUX=/lib/modules/`uname -r`/build
+
+2. Update your ''10_custom.conf'' file to use the appropriate variables
+for Vanilla OVS:
+
+ .. code-block:: console
+
+ VSWITCH = 'OvsVanilla'
+ VSWITCH_VANILLA_PHY_PORT_NAMES = ['$PORT1', '$PORT1']
+
+Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind
+to the vswitch.
+
+3. Run test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file <path_to_settings_py>
+
+Please note if you don't want to configure Vanilla OVS through the
+configuration file, you can pass it as a CLI argument; BUT you must
+set the ports.
+
+ .. code-block:: console
+
+ ./vsperf --vswitch OvsVanilla
+
+
+Executing PVP and PVVP tests
+----------------------------
+To run tests using vhost-user as guest access method:
+
+1. Set VHOST_METHOD and VNF of your settings file to:
+
+ .. code-block:: console
+
+ VHOST_METHOD='user'
+ VNF = 'QemuDpdkVhost'
+
+2. Recompile src for VHOST USER testing
+
+ .. code-block:: console
+
+ cd src
+ make cleanse
+ make VHOST_USER=y
+
+3. Run test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file <path_to_settings_py>
+
+To run tests using vhost-cuse as guest access method:
+
+1. Set VHOST_METHOD and VNF of your settings file to:
+
+ .. code-block:: console
+
+ VHOST_METHOD='cuse'
+ VNF = 'QemuDpdkVhostCuse'
+
+2. Recompile src for VHOST USER testing
+
+ .. code-block:: console
+
+ cd src
+ make cleanse
+ make VHOST_USER=n
+
+3. Run test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file <path_to_settings_py>
+
+Executing PVP tests using Vanilla OVS
+-------------------------------------
+To run tests using Vanilla OVS:
+
+1. Set the following variables:
+
+ .. code-block:: console
+
+ VSWITCH = 'OvsVanilla'
+ VNF = 'QemuVirtioNet'
+
+ VANILLA_TGEN_PORT1_IP = n.n.n.n
+ VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn
+
+ VANILLA_TGEN_PORT2_IP = n.n.n.n
+ VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn
+
+ VANILLA_BRIDGE_IP = n.n.n.n
+
+ or use --test-param
+
+ ./vsperf --conf-file user_settings.py
+ --test-param "vanilla_tgen_tx_ip=n.n.n.n;
+ vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
+
+
+2. Recompile src for Vanilla OVS testing
+
+ .. code-block:: console
+
+ cd src
+ make cleanse
+ make WITH_LINUX=/lib/modules/`uname -r`/build
+
+3. Run test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file <path_to_settings_py>
+
+Selection of loopback application for PVP and PVVP tests
+--------------------------------------------------------
+To select loopback application, which will perform traffic forwarding
+inside VM, following configuration parameter should be configured:
+
+ .. code-block:: console
+
+ GUEST_LOOPBACK = ['testpmd', 'testpmd']
+
+ or use --test-param
+
+ ./vsperf --conf-file user_settings.py
+ --test-param "guest_loopback=testpmd"
+
+Supported loopback applications are:
+
+ .. code-block:: console
+
+ 'testpmd' - testpmd from dpdk will be built and used
+ 'l2fwd' - l2fwd module provided by Huawei will be built and used
+ 'linux_bridge' - linux bridge will be configured
+ 'buildin' - nothing will be configured by vsperf; VM image must
+ ensure traffic forwarding between its interfaces
+
+Guest loopback application must be configured, otherwise traffic
+will not be forwarded by VM and testcases with PVP and PVVP deployments
+will fail. Guest loopback application is set to 'testpmd' by default.
+
+Code change verification by pylint
+----------------------------------
+Every developer participating in VSPERF project should run
+pylint before his python code is submitted for review. Project
+specific configuration for pylint is available at 'pylint.rc'.
+
+Example of manual pylint invocation:
+
+ .. code-block:: console
+
+ pylint --rcfile ./pylintrc ./vsperf
+
+GOTCHAs:
+--------
+
+OVS with DPDK and QEMU
+~~~~~~~~~~~~~~~~~~~~~~~
+If you encounter the following error: "before (last 100 chars):
+'-path=/dev/hugepages,share=on: unable to map backing store for
+hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP
+deployment scenario, check the amount of hugepages on your system:
+
+.. code:: bash
+
+ cat /proc/meminfo | grep HugePages
+
+
+By default the vswitchd is launched with 1Gb of memory, to change
+this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate
+an appropriate amount of memory:
+
+.. code:: bash
+
+ VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
+
+