integration: Test vHost User numa awareness

Open vSwitch with DPDK can optimize memory usage
in case of NUMA architecture to avoid unnecessary
memory access across NUMA slots. In a nutshell,
PMD threads serving virtual NICs are co-located at
the same NUMA slot as QEMU instance, which is using
these NICs.
This patch adds new (functional) integration testcase,
which verifies OVS vHost User numa awareness feature.
Step driven test objects were updated to allow a call
of OS utilies and evaluation of conditions. Also the
documentation was updated with the list of supported
test objects and their methods.

JIRA: VSPERF-377

Change-Id: I184e71e066d27b5b9fc9e6a9f7e240e2d1b5a0fa
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>

1 files changed, 177 insertions, 0 deletions

diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index b0926d89..ceb11635 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -49,6 +49,173 @@ test will fail and terminate. The test will continue until a failure is detected
 or all steps pass. A csv report file is generated after a test completes with an
 OK or FAIL result.
 
+Test objects and their functions
+--------------------------------
+
+Every test step can call a function of one of the supported test objects. The list
+of supported objects and their most common functions follows:
+
+    * ``vswitch`` - provides functions for vSwitch configuration
+
+      List of supported functions:
+
+        * ``add_switch br_name`` - creates a new switch (bridge) with given ``br_name``
+        * ``del_switch br_name`` - deletes switch (bridge) with given ``br_name``
+        * ``add_phy_port br_name`` - adds a physical port into bridge specified by ``br_name``
+        * ``add_vport br_name`` - adds a virtual port into bridge specified by ``br_name``
+        * ``del_port br_name port_name`` - removes physical or virtual port specified by
+          ``port_name`` from bridge ``br_name``
+        * ``add_flow br_name flow`` - adds flow specified by ``flow`` dictionary into
+          the bridge ``br_name``; Content of flow dictionary will be passed to the vSwitch.
+          In case of Open vSwitch it will be passed to the ``ovs-ofctl add-flow`` command.
+          Please see Open vSwitch documentation for the list of supported flow parameters.
+        * ``del_flow br_name [flow]`` - deletes flow specified by ``flow`` dictionary from
+          bridge ``br_name``; In case that optional parameter ``flow`` is not specified
+          or set to an empty dictionary ``{}``, then all flows from bridge ``br_name``
+          will be deleted.
+        * ``dump_flows br_name`` - dumps all flows from bridge specified by ``br_name``
+        * ``enable_stp br_name`` - enables Spanning Tree Protocol for bridge ``br_name``
+        * ``disable_stp br_name`` - disables Spanning Tree Protocol for bridge ``br_name``
+        * ``enable_rstp br_name`` - enables Rapid Spanning Tree Protocol for bridge ``br_name``
+        * ``disable_rstp br_name`` - disables Rapid Spanning Tree Protocol for bridge ``br_name``
+
+        Examples:
+
+        .. code-block:: python
+
+            ['vswitch', 'add_switch', 'int_br0']
+
+            ['vswitch', 'del_switch', 'int_br0']
+
+            ['vswitch', 'add_phy_port', 'int_br0']
+
+            ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]']
+
+            ['vswitch', 'add_flow', 'int_br0', {'in_port': '1', 'actions': ['output:2'],
+             'idle_timeout': '0'}],
+
+            ['vswitch', 'enable_rstp', 'int_br0']
+
+    * ``vnf[ID]`` - provides functions for deployment and termination of VNFs; Optional
+      alfanumerical ``ID`` is used for VNF identification in case that testcase
+      deploys multiple VNFs.
+
+      List of supported functions:
+
+        * ``start`` - starts a VNF based on VSPERF configuration
+        * ``stop`` - gracefully terminates given VNF
+
+        Examples:
+
+        .. code-block:: python
+
+            ['vnf1', 'start']
+            ['vnf2', 'start']
+            ['vnf2', 'stop']
+            ['vnf1', 'stop']
+
+    * ``trafficgen`` - triggers traffic generation
+
+      List of supported functions:
+
+        * ``send_traffic traffic`` - starts a traffic based on the vsperf configuration
+          and given ``traffic`` dictionary. More details about ``traffic`` dictionary
+          and its possible values are available at `Traffic Generator Integration Guide
+          <http://artifacts.opnfv.org/vswitchperf/docs/design/trafficgen_integration_guide.html#step-5-supported-traffic-types>`__
+
+        Examples:
+
+        .. code-block:: python
+
+            ['trafficgen', 'send_traffic', {'traffic_type' : 'throughput'}]
+
+            ['trafficgen', 'send_traffic', {'traffic_type' : 'back2back', 'bidir' : 'True'}]
+
+    * ``settings`` - reads or modifies VSPERF configuration
+
+      List of supported functions:
+
+        * ``getValue param`` - returns value of given ``param``
+        * ``setValue param value`` - sets value of ``param`` to given ``value``
+
+        Examples:
+
+        .. code-block:: python
+
+            ['settings', 'getValue', 'TOOLS']
+
+            ['settings', 'setValue', 'GUEST_USERNAME', ['root']]
+
+    * ``namespace`` - creates or modifies network namespaces
+
+      List of supported functions:
+
+        * ``create_namespace name`` - creates new namespace with given ``name``
+        * ``delete_namespace name`` - deletes namespace specified by its ``name``
+        * ``assign_port_to_namespace port name [port_up]`` - assigns NIC specified by ``port``
+          into given namespace ``name``; If optional parameter ``port_up`` is set to ``True``,
+          then port will be brought up.
+        * ``add_ip_to_namespace_eth port name addr cidr`` - assigns an IP address ``addr``/``cidr``
+          to the NIC specified by ``port`` within namespace ``name``
+        * ``reset_port_to_root port name`` - returns given ``port`` from namespace ``name`` back
+          to the root namespace
+
+        Examples:
+
+        .. code-block:: python
+
+            ['namespace', 'create_namespace', 'testns']
+
+            ['namespace', 'assign_port_to_namespace', 'eth0', 'testns']
+
+    * ``veth`` - manipulates with eth and veth devices
+
+      List of supported functions:
+
+        * ``add_veth_port port peer_port`` - adds a pair of veth ports named ``port`` and
+          ``peer_port``
+        * ``del_veth_port port peer_port`` - deletes a veth port pair specified by ``port``
+          and ``peer_port``
+        * ``bring_up_eth_port eth_port [namespace]`` - brings up ``eth_port`` in (optional)
+          ``namespace``
+
+        Examples:
+
+        .. code-block:: python
+
+            ['veth', 'add_veth_port', 'veth', 'veth1']
+
+            ['veth', 'bring_up_eth_port', 'eth1']
+
+    * ``tools`` - provides a set of helper functions
+
+      List of supported functions:
+
+        * ``Assert condition`` - evaluates given ``condition`` and raises ``AssertionError``
+          in case that condition is not ``True``
+        * ``Eval expression`` - evaluates given expression as a python code and returns
+          its result
+        * ``Exec command [regex]`` - executes a shell command and filters its output by
+          (optional) regular expression
+
+        Examples:
+
+        .. code-block:: python
+
+            ['tools', 'exec', 'numactl -H', 'available: ([0-9]+)']
+            ['tools', 'assert', '#STEP[-1][0]>1']
+
+    * ``wait`` - is used for test case interruption. This object doesn't have
+      any functions. Once reached, vsperf will pause test execution and waits
+      for press of ``Enter key``. It can be used during testcase design
+      for debugging purposes.
+
+      Examples:
+
+      .. code-block:: python
+
+        ['wait']
+
 Test Macros
 -----------
 
@@ -75,6 +242,16 @@ This test profile uses the vswitch add_vport method which returns a string
 value of the port added. This is later called by the del_port method using the
 name from step 1.
 
+It is also possible to use negative indexes in step macros. In that case
+``#STEP[-1]`` will refer to the result from previous step, ``#STEP[-2]``
+will refer to result of step called before previous step, etc. It means,
+that you could change ``STEP 2`` from previous example to achieve the same
+functionality:
+
+.. code-block:: python
+
+                ['vswitch', 'del_port', 'int_br0', '#STEP[-1][0]'],  # STEP 2
+
 Also commonly used steps can be created as a separate profile.
 
 .. code-block:: python