summaryrefslogtreecommitdiffstats
path: root/docs/requirements/vswitchperf_ltp.rst
diff options
context:
space:
mode:
authorTrevor Cooper <trevor.cooper@intel.com>2017-03-21 13:25:49 -0700
committerTrevor Cooper <trevor.cooper@intel.com>2017-03-21 13:25:49 -0700
commit32a5263216d79ad34041dca55357278f092bb931 (patch)
treee3bf10ba8190ad93d2b114c1903cc43e2dfbf6b6 /docs/requirements/vswitchperf_ltp.rst
parent59668b1aa68da507335ef351619d9f50019df762 (diff)
Moved doc files to testing document structure testing/user ... testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
Diffstat (limited to 'docs/requirements/vswitchperf_ltp.rst')
-rw-r--r--docs/requirements/vswitchperf_ltp.rst1348
1 files changed, 0 insertions, 1348 deletions
diff --git a/docs/requirements/vswitchperf_ltp.rst b/docs/requirements/vswitchperf_ltp.rst
deleted file mode 100644
index 2b74d676..00000000
--- a/docs/requirements/vswitchperf_ltp.rst
+++ /dev/null
@@ -1,1348 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. 3.1
-
-*****************************
-VSPERF LEVEL TEST PLAN (LTP)
-*****************************
-
-===============
-Introduction
-===============
-
-The objective of the OPNFV project titled
-**Characterize vSwitch Performance for Telco NFV Use Cases**, is to
-evaluate the performance of virtual switches to identify its suitability for a
-Telco Network Function Virtualization (NFV) environment. The intention of this
-Level Test Plan (LTP) document is to specify the scope, approach, resources,
-and schedule of the virtual switch performance benchmarking activities in
-OPNFV. The test cases will be identified in a separate document called the
-Level Test Design (LTD) document.
-
-This document is currently in draft form.
-
-.. 3.1.1
-
-
-.. _doc-id:
-
-Document identifier
-=========================
-
-The document id will be used to uniquely identify versions of the LTP. The
-format for the document id will be: OPNFV\_vswitchperf\_LTP\_REL\_STATUS, where
-by the status is one of: draft, reviewed, corrected or final. The document id
-for this version of the LTP is: OPNFV\_vswitchperf\_LTP\_Colorado\_REVIEWED.
-
-.. 3.1.2
-
-.. _scope:
-
-Scope
-==========
-
-The main purpose of this project is to specify a suite of
-performance tests in order to objectively measure the current packet
-transfer characteristics of a virtual switch in the NFVI. The intent of
-the project is to facilitate the performance testing of any virtual switch.
-Thus, a generic suite of tests shall be developed, with no hard dependencies to
-a single implementation. In addition, the test case suite shall be
-architecture independent.
-
-The test cases developed in this project shall not form part of a
-separate test framework, all of these tests may be inserted into the
-Continuous Integration Test Framework and/or the Platform Functionality
-Test Framework - if a vSwitch becomes a standard component of an OPNFV
-release.
-
-.. 3.1.3
-
-References
-===============
-
-* `RFC 1242 Benchmarking Terminology for Network Interconnection
- Devices <http://www.ietf.org/rfc/rfc1242.txt>`__
-* `RFC 2544 Benchmarking Methodology for Network Interconnect
- Devices <http://www.ietf.org/rfc/rfc2544.txt>`__
-* `RFC 2285 Benchmarking Terminology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2285.txt>`__
-* `RFC 2889 Benchmarking Methodology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2889.txt>`__
-* `RFC 3918 Methodology for IP Multicast
- Benchmarking <http://www.ietf.org/rfc/rfc3918.txt>`__
-* `RFC 4737 Packet Reordering
- Metrics <http://www.ietf.org/rfc/rfc4737.txt>`__
-* `RFC 5481 Packet Delay Variation Applicability
- Statement <http://www.ietf.org/rfc/rfc5481.txt>`__
-* `RFC 6201 Device Reset
- Characterization <http://tools.ietf.org/html/rfc6201>`__
-
-.. 3.1.4
-
-Level in the overall sequence
-===============================
-The level of testing conducted by vswitchperf in the overall testing sequence (among
-all the testing projects in OPNFV) is the performance benchmarking of a
-specific component (the vswitch) in the OPNFV platfrom. It's expected that this
-testing will follow on from the functional and integration testing conducted by
-other testing projects in OPNFV, namely Functest and Yardstick.
-
-.. 3.1.5
-
-Test classes and overall test conditions
-=========================================
-A benchmark is defined by the IETF as: A standardized test that serves as a
-basis for performance evaluation and comparison. It's important to note that
-benchmarks are not Functional tests. They do not provide PASS/FAIL criteria,
-and most importantly ARE NOT performed on live networks, or performed with live
-network traffic.
-
-In order to determine the packet transfer characteristics of a virtual switch,
-the benchmarking tests will be broken down into the following categories:
-
-- **Throughput Tests** to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by `RFC1242 <https://www.rfc-editor.org/rfc/rfc1242.txt>`__)
- without traffic loss.
-- **Packet and Frame Delay Tests** to measure average, min and max
- packet and frame delay for constant loads.
-- **Stream Performance Tests** (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the virtual switch.
-- **Request/Response Performance** Tests (TCP, UDP) the measure the
- transaction rate through the virtual switch.
-- **Packet Delay Tests** to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.
-- **Scalability Tests** to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic's configuration... it has to deal with increases.
-- **Control Path and Datapath Coupling** Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT.
-- **CPU and Memory Consumption Tests** to understand the virtual
- switch’s footprint on the system, this includes:
-
- * CPU core utilization.
- * CPU cache utilization.
- * Memory footprint.
- * System bus (QPI, PCI, ..) utilization.
- * Memory lanes utilization.
- * CPU cycles consumed per packet.
- * Time To Establish Flows Tests.
-
-- **Noisy Neighbour Tests**, to understand the effects of resource
- sharing on the performance of a virtual switch.
-
-**Note:** some of the tests above can be conducted simultaneously where
-the combined results would be insightful, for example Packet/Frame Delay
-and Scalability.
-
-
-
-.. 3.2
-
-.. _details-of-LTP:
-
-===================================
-Details of the Level Test Plan
-===================================
-
-This section describes the following items:
-* Test items and their identifiers (TestItems_)
-* Test Traceability Matrix (TestMatrix_)
-* Features to be tested (FeaturesToBeTested_)
-* Features not to be tested (FeaturesNotToBeTested_)
-* Approach (Approach_)
-* Item pass/fail criteria (PassFailCriteria_)
-* Suspension criteria and resumption requirements (SuspensionResumptionReqs_)
-
-.. 3.2.1
-
-.. _TestItems:
-
-Test items and their identifiers
-==================================
-The test item/application vsperf is trying to test are virtual switches and in
-particular their performance in an nfv environment. vsperf will first try to
-measure the maximum achievable performance by a virtual switch and then it will
-focus in on usecases that are as close to real life deployment scenarios as
-possible.
-
-.. 3.2.2
-
-.. _TestMatrix:
-
-Test Traceability Matrix
-==========================
-vswitchperf leverages the "3x3" matrix (introduced in
-https://tools.ietf.org/html/draft-ietf-bmwg-virtual-net-02) to achieve test
-traceability. The matrix was expanded to 3x4 to accommodate scale metrics when
-displaying the coverage of many metrics/benchmarks). Test case covreage in the
-LTD is tracked using the following catagories:
-
-
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-
-X = denotes a test catagory that has 1 or more test cases defined.
-
-.. 3.2.3
-
-.. _FeaturesToBeTested:
-
-Features to be tested
-==========================
-
-Characterizing virtual switches (i.e. Device Under Test (DUT) in this document)
-includes measuring the following performance metrics:
-
-- **Throughput** as defined by `RFC1242
- <https://www.rfc-editor.org/rfc/rfc1242.txt>`__: The maximum rate at which
- **none** of the offered frames are dropped by the DUT. The maximum frame
- rate and bit rate that can be transmitted by the DUT without any error
- should be recorded. Note there is an equivalent bit rate and a specific
- layer at which the payloads contribute to the bits. Errors and
- improperly formed frames or packets are dropped.
-- **Packet delay** introduced by the DUT and its cumulative effect on
- E2E networks. Frame delay can be measured equivalently.
-- **Packet delay variation**: measured from the perspective of the
- VNF/application. Packet delay variation is sometimes called "jitter".
- However, we will avoid the term "jitter" as the term holds different
- meaning to different groups of people. In this document we will
- simply use the term packet delay variation. The preferred form for this
- metric is the PDV form of delay variation defined in `RFC5481
- <https://www.rfc-editor.org/rfc/rfc5481.txt>`__. The most relevant
- measurement of PDV considers the delay variation of a single user flow,
- as this will be relevant to the size of end-system buffers to compensate
- for delay variation. The measurement system's ability to store the
- delays of individual packets in the flow of interest is a key factor
- that determines the specific measurement method. At the outset, it is
- ideal to view the complete PDV distribution. Systems that can capture
- and store packets and their delays have the freedom to calculate the
- reference minimum delay and to determine various quantiles of the PDV
- distribution accurately (in post-measurement processing routines).
- Systems without storage must apply algorithms to calculate delay and
- statistical measurements on the fly. For example, a system may store
- temporary estimates of the mimimum delay and the set of (100) packets
- with the longest delays during measurement (to calculate a high quantile,
- and update these sets with new values periodically.
- In some cases, a limited number of delay histogram bins will be
- available, and the bin limits will need to be set using results from
- repeated experiments. See section 8 of `RFC5481
- <https://www.rfc-editor.org/rfc/rfc5481.txt>`__.
-- **Packet loss** (within a configured waiting time at the receiver): All
- packets sent to the DUT should be accounted for.
-- **Burst behaviour**: measures the ability of the DUT to buffer packets.
-- **Packet re-ordering**: measures the ability of the device under test to
- maintain sending order throughout transfer to the destination.
-- **Packet correctness**: packets or Frames must be well-formed, in that
- they include all required fields, conform to length requirements, pass
- integrity checks, etc.
-- **Availability and capacity** of the DUT i.e. when the DUT is fully “up”
- and connected, following measurements should be captured for
- DUT without any network packet load:
-
- - Includes average power consumption of the CPUs (in various power states) and
- system over specified period of time. Time period should not be less
- than 60 seconds.
- - Includes average per core CPU utilization over specified period of time.
- Time period should not be less than 60 seconds.
- - Includes the number of NIC interfaces supported.
- - Includes headroom of VM workload processing cores (i.e. available
- for applications).
-
-.. 3.2.4
-
-.. _FeaturesNotToBeTested:
-
-Features not to be tested
-==========================
-vsperf doesn't intend to define or perform any functional tests. The aim is to
-focus on performance.
-
-.. 3.2.5
-
-.. _Approach:
-
-Approach
-==============
-The testing approach adoped by the vswitchperf project is black box testing,
-meaning the test inputs can be generated and the outputs captured and
-completely evaluated from the outside of the System Under Test. Some metrics
-can be collected on the SUT, such as cpu or memory utilization if the
-collection has no/minimal impact on benchmark.
-This section will look at the deployment scenarios and the general methodology
-used by vswitchperf. In addition, this section will also specify the details of
-the Test Report that must be collected for each of the test cases.
-
-.. 3.2.5.1
-
-Deployment Scenarios
---------------------------
-The following represents possible deployment test scenarios which can
-help to determine the performance of both the virtual switch and the
-datapaths to physical ports (to NICs) and to logical ports (to VNFs):
-
-.. 3.2.5.1.1
-
-.. _Phy2Phy:
-
-Physical port → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.. code-block:: console
-
- _
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.2
-
-.. _PVP:
-
-Physical port → vSwitch → VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ _|
- ^ :
- | |
- : v _
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.3
-
-.. _PVVP:
-
-Physical port → vSwitch → VNF → vSwitch → VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+ _|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | L-----------------+ v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+ _|
- ^ ^ : :
- | | | |
- : : v v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.4
-
-Physical port → VNF → vSwitch → VNF → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- |+-------------------+ | | +-------------------+| |
- || Application | | | | Application || |
- |+-------------------+ | | +-------------------+| |
- | ^ | | | ^ | | | Guests
- | | v | | | v | |
- |+-------------------+ | | +-------------------+| |
- || logical ports | | | | logical ports || |
- || 0 1 | | | | 0 1 || |
- ++--------------------++ ++--------------------++ _|
- ^ : ^ :
- (PCI passthrough) | | (PCI passthrough)
- | v : | _
- +--------++------------+-+------------++---------+ |
- | | || 0 | | 1 || | | |
- | | ||logical port| |logical port|| | | |
- | | |+------------+ +------------+| | | |
- | | | | ^ | | | |
- | | | L-----------------+ | | | |
- | | | | | | | Host
- | | | vSwitch | | | |
- | | +-----------------------------+ | | |
- | | | | |
- | | v | |
- | +--------------+ +--------------+ | |
- | | phy port/VF | | phy port/VF | | |
- +-+--------------+--------------+--------------+-+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.5
-
-Physical port → vSwitch → VNF
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ _|
- ^
- |
- : _
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ _|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.6
-
-VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ _|
- :
- |
- v _
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ _|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.7
-
-VNF → vSwitch → VNF → vSwitch
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +-------------------------+ +-------------------------+ |
- | Guest 1 | | Guest 2 | |
- | +-----------------+ | | +-----------------+ | |
- | | Application | | | | Application | | |
- | +-----------------+ | | +-----------------+ | |
- | : | | ^ | |
- | | | | | | | Guest
- | v | | : | |
- | +---------------+ | | +---------------+ | |
- | | logical port 0| | | | logical port 0| | |
- +-----+---------------+---+ +---+---------------+-----+ _|
- : ^
- | |
- v : _
- +----+---------------+------------+---------------+-----+ |
- | | port 0 | | port 1 | | |
- | +---------------+ +---------------+ | |
- | : ^ | |
- | | | | | Host
- | +--------------------+ | |
- | | |
- | vswitch | |
- +-------------------------------------------------------+ _|
-
-.. 3.2.5.1.8
-
-HOST 1(Physical port → virtual switch → VNF → virtual switch → Physical port)
-→ HOST 2(Physical port → virtual switch → VNF → virtual switch → Physical port)
-
-HOST 1 (PVP) → HOST 2 (PVP)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+ _|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+--+ +---+---------------+--+ |
- | | 0 1 | | | | 3 4 | | |
- | | logical ports | | | | logical ports | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | | Hosts
- | | v | | | v | |
- | +--------------+ | | +--------------+ | |
- | | phy ports | | | | phy ports | | |
- +---+--------------+---+ +---+--------------+---+ _|
- ^ : : :
- | +-----------------+ |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-
-
-**Note:** For tests where the traffic generator and/or measurement
-receiver are implemented on VM and connected to the virtual switch
-through vNIC, the issues of shared resources and interactions between
-the measurement devices and the device under test must be considered.
-
-**Note:** Some RFC 2889 tests require a full-mesh sending and receiving
-pattern involving more than two ports. This possibility is illustrated in the
-Physical port → vSwitch → VNF → vSwitch → VNF → vSwitch → physical port
-diagram above (with 2 sending and 2 receiving ports, though all ports
-could be used bi-directionally).
-
-**Note:** When Deployment Scenarios are used in RFC 2889 address learning
-or cache capacity testing, an additional port from the vSwitch must be
-connected to the test device. This port is used to listen for flooded
-frames.
-
-.. 3.2.5.2
-
-General Methodology:
---------------------------
-To establish the baseline performance of the virtual switch, tests would
-initially be run with a simple workload in the VNF (the recommended
-simple workload VNF would be `DPDK <http://www.dpdk.org/>`__'s testpmd
-application forwarding packets in a VM or vloop\_vnf a simple kernel
-module that forwards traffic between two network interfaces inside the
-virtualized environment while bypassing the networking stack).
-Subsequently, the tests would also be executed with a real Telco
-workload running in the VNF, which would exercise the virtual switch in
-the context of higher level Telco NFV use cases, and prove that its
-underlying characteristics and behaviour can be measured and validated.
-Suitable real Telco workload VNFs are yet to be identified.
-
-.. 3.2.5.2.1
-
-.. _default-test-parameters:
-
-Default Test Parameters
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The following list identifies the default parameters for suite of
-tests:
-
-- Reference application: Simple forwarding or Open Source VNF.
-- Frame size (bytes): 64, 128, 256, 512, 1024, 1280, 1518, 2K, 4k OR
- Packet size based on use-case (e.g. RTP 64B, 256B) OR Mix of packet sizes as
- maintained by the Functest project <https://wiki.opnfv.org/traffic_profile_management>.
-- Reordering check: Tests should confirm that packets within a flow are
- not reordered.
-- Duplex: Unidirectional / Bidirectional. Default: Full duplex with
- traffic transmitting in both directions, as network traffic generally
- does not flow in a single direction. By default the data rate of
- transmitted traffic should be the same in both directions, please
- note that asymmetric traffic (e.g. downlink-heavy) tests will be
- mentioned explicitly for the relevant test cases.
-- Number of Flows: Default for non scalability tests is a single flow.
- For scalability tests the goal is to test with maximum supported
- flows but where possible will test up to 10 Million flows. Start with
- a single flow and scale up. By default flows should be added
- sequentially, tests that add flows simultaneously will explicitly
- call out their flow addition behaviour. Packets are generated across
- the flows uniformly with no burstiness. For multi-core tests should
- consider the number of packet flows based on vSwitch/VNF multi-thread
- implementation and behavior.
-
-- Traffic Types: UDP, SCTP, RTP, GTP and UDP traffic.
-- Deployment scenarios are:
-- Physical → virtual switch → physical.
-- Physical → virtual switch → VNF → virtual switch → physical.
-- Physical → virtual switch → VNF → virtual switch → VNF → virtual
- switch → physical.
-- Physical → VNF → virtual switch → VNF → physical.
-- Physical → virtual switch → VNF.
-- VNF → virtual switch → Physical.
-- VNF → virtual switch → VNF.
-
-Tests MUST have these parameters unless otherwise stated. **Test cases
-with non default parameters will be stated explicitly**.
-
-**Note**: For throughput tests unless stated otherwise, test
-configurations should ensure that traffic traverses the installed flows
-through the virtual switch, i.e. flows are installed and have an appropriate
-time out that doesn't expire before packet transmission starts.
-
-.. 3.2.5.2.2
-
-Flow Classification
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Virtual switches classify packets into flows by processing and matching
-particular header fields in the packet/frame and/or the input port where
-the packets/frames arrived. The vSwitch then carries out an action on
-the group of packets that match the classification parameters. Thus a
-flow is considered to be a sequence of packets that have a shared set of
-header field values or have arrived on the same port and have the same
-action applied to them. Performance results can vary based on the
-parameters the vSwitch uses to match for a flow. The recommended flow
-classification parameters for L3 vSwitch performance tests are: the
-input port, the source IP address, the destination IP address and the
-Ethernet protocol type field. It is essential to increase the flow
-time-out time on a vSwitch before conducting any performance tests that
-do not measure the flow set-up time. Normally the first packet of a
-particular flow will install the flow in the vSwitch which adds an
-additional latency, subsequent packets of the same flow are not subject
-to this latency if the flow is already installed on the vSwitch.
-
-.. 3.2.5.2.3
-
-Test Priority
-~~~~~~~~~~~~~~~~~~~~~
-
-Tests will be assigned a priority in order to determine which tests
-should be implemented immediately and which tests implementations
-can be deferred.
-
-Priority can be of following types: - Urgent: Must be implemented
-immediately. - High: Must be implemented in the next release. - Medium:
-May be implemented after the release. - Low: May or may not be
-implemented at all.
-
-.. 3.2.5.2.4
-
-SUT Setup
-~~~~~~~~~~~~~~~~~~
-
-The SUT should be configured to its "default" state. The
-SUT's configuration or set-up must not change between tests in any way
-other than what is required to do the test. All supported protocols must
-be configured and enabled for each test set up.
-
-.. 3.2.5.2.5
-
-Port Configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The DUT should be configured with n ports where
-n is a multiple of 2. Half of the ports on the DUT should be used as
-ingress ports and the other half of the ports on the DUT should be used
-as egress ports. Where a DUT has more than 2 ports, the ingress data
-streams should be set-up so that they transmit packets to the egress
-ports in sequence so that there is an even distribution of traffic
-across ports. For example, if a DUT has 4 ports 0(ingress), 1(ingress),
-2(egress) and 3(egress), the traffic stream directed at port 0 should
-output a packet to port 2 followed by a packet to port 3. The traffic
-stream directed at port 1 should also output a packet to port 2 followed
-by a packet to port 3.
-
-.. 3.2.5.2.6
-
-Frame Formats
-~~~~~~~~~~~~~~~~~~~~~
-
-**Frame formats Layer 2 (data link layer) protocols**
-
-- Ethernet II
-
-.. code-block:: console
-
- +---------------------------+-----------+
- | Ethernet Header | Payload | Check Sum |
- +-----------------+---------+-----------+
- |_________________|_________|___________|
- 14 Bytes 46 - 1500 4 Bytes
- Bytes
-
-
-**Layer 3 (network layer) protocols**
-
-- IPv4
-
-.. code-block:: console
-
- +-----------------+-----------+---------+-----------+
- | Ethernet Header | IP Header | Payload | Checksum |
- +-----------------+-----------+---------+-----------+
- |_________________|___________|_________|___________|
- 14 Bytes 20 bytes 26 - 1480 4 Bytes
- Bytes
-
-- IPv6
-
-.. code-block:: console
-
- +-----------------+-----------+---------+-----------+
- | Ethernet Header | IP Header | Payload | Checksum |
- +-----------------+-----------+---------+-----------+
- |_________________|___________|_________|___________|
- 14 Bytes 40 bytes 26 - 1460 4 Bytes
- Bytes
-
-**Layer 4 (transport layer) protocols**
-
- - TCP
- - UDP
- - SCTP
-
-.. code-block:: console
-
- +-----------------+-----------+-----------------+---------+-----------+
- | Ethernet Header | IP Header | Layer 4 Header | Payload | Checksum |
- +-----------------+-----------+-----------------+---------+-----------+
- |_________________|___________|_________________|_________|___________|
- 14 Bytes 40 bytes 20 Bytes 6 - 1460 4 Bytes
- Bytes
-
-
-**Layer 5 (application layer) protocols**
-
- - RTP
- - GTP
-
-.. code-block:: console
-
- +-----------------+-----------+-----------------+---------+-----------+
- | Ethernet Header | IP Header | Layer 4 Header | Payload | Checksum |
- +-----------------+-----------+-----------------+---------+-----------+
- |_________________|___________|_________________|_________|___________|
- 14 Bytes 20 bytes 20 Bytes >= 6 Bytes 4 Bytes
-
-.. 3.2.5.2.7
-
-Packet Throughput
-~~~~~~~~~~~~~~~~~~~~~~~~~
-There is a difference between an Ethernet frame,
-an IP packet, and a UDP datagram. In the seven-layer OSI model of
-computer networking, packet refers to a data unit at layer 3 (network
-layer). The correct term for a data unit at layer 2 (data link layer) is
-a frame, and at layer 4 (transport layer) is a segment or datagram.
-
-Important concepts related to 10GbE performance are frame rate and
-throughput. The MAC bit rate of 10GbE, defined in the IEEE standard 802
-.3ae, is 10 billion bits per second. Frame rate is based on the bit rate
-and frame format definitions. Throughput, defined in IETF RFC 1242, is
-the highest rate at which the system under test can forward the offered
-load, without loss.
-
-The frame rate for 10GbE is determined by a formula that divides the 10
-billion bits per second by the preamble + frame length + inter-frame
-gap.
-
-The maximum frame rate is calculated using the minimum values of the
-following parameters, as described in the IEEE 802 .3ae standard:
-
-- Preamble: 8 bytes \* 8 = 64 bits
-- Frame Length: 64 bytes (minimum) \* 8 = 512 bits
-- Inter-frame Gap: 12 bytes (minimum) \* 8 = 96 bits
-
-Therefore, Maximum Frame Rate (64B Frames)
-= MAC Transmit Bit Rate / (Preamble + Frame Length + Inter-frame Gap)
-= 10,000,000,000 / (64 + 512 + 96)
-= 10,000,000,000 / 672
-= 14,880,952.38 frame per second (fps)
-
-.. 3.2.5.3
-
-RFCs for testing virtual switch performance
---------------------------------------------------
-
-The starting point for defining the suite of tests for benchmarking the
-performance of a virtual switch is to take existing RFCs and standards
-that were designed to test their physical counterparts and adapting them
-for testing virtual switches. The rationale behind this is to establish
-a fair comparison between the performance of virtual and physical
-switches. This section outlines the RFCs that are used by this
-specification.
-
-.. 3.2.5.3.1
-
-RFC 1242 Benchmarking Terminology for Network Interconnection
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Devices RFC 1242 defines the terminology that is used in describing
-performance benchmarking tests and their results. Definitions and
-discussions covered include: Back-to-back, bridge, bridge/router,
-constant load, data link frame size, frame loss rate, inter frame gap,
-latency, and many more.
-
-.. 3.2.5.3.2
-
-RFC 2544 Benchmarking Methodology for Network Interconnect Devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2544 outlines a benchmarking methodology for network Interconnect
-Devices. The methodology results in performance metrics such as latency,
-frame loss percentage, and maximum data throughput.
-
-In this document network “throughput” (measured in millions of frames
-per second) is based on RFC 2544, unless otherwise noted. Frame size
-refers to Ethernet frames ranging from smallest frames of 64 bytes to
-largest frames of 9K bytes.
-
-Types of tests are:
-
-1. Throughput test defines the maximum number of frames per second
- that can be transmitted without any error, or 0% loss ratio.
- In some Throughput tests (and those tests with long duration),
- evaluation of an additional frame loss ratio is suggested. The
- current ratio (10^-7 %) is based on understanding the typical
- user-to-user packet loss ratio needed for good application
- performance and recognizing that a single transfer through a
- vswitch must contribute a tiny fraction of user-to-user loss.
- Further, the ratio 10^-7 % also recognizes practical limitations
- when measuring loss ratio.
-
-2. Latency test measures the time required for a frame to travel from
- the originating device through the network to the destination device.
- Please note that RFC2544 Latency measurement will be superseded with
- a measurement of average latency over all successfully transferred
- packets or frames.
-
-3. Frame loss test measures the network’s
- response in overload conditions - a critical indicator of the
- network’s ability to support real-time applications in which a
- large amount of frame loss will rapidly degrade service quality.
-
-4. Burst test assesses the buffering capability of a virtual switch. It
- measures the maximum number of frames received at full line rate
- before a frame is lost. In carrier Ethernet networks, this
- measurement validates the excess information rate (EIR) as defined in
- many SLAs.
-
-5. System recovery to characterize speed of recovery from an overload
- condition.
-
-6. Reset to characterize speed of recovery from device or software
- reset. This type of test has been updated by `RFC6201
- <https://www.rfc-editor.org/rfc/rfc6201.txt>`__ as such,
- the methodology defined by this specification will be that of RFC 6201.
-
-Although not included in the defined RFC 2544 standard, another crucial
-measurement in Ethernet networking is packet delay variation. The
-definition set out by this specification comes from
-`RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__.
-
-.. 3.2.5.3.3
-
-RFC 2285 Benchmarking Terminology for LAN Switching Devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2285 defines the terminology that is used to describe the
-terminology for benchmarking a LAN switching device. It extends RFC
-1242 and defines: DUTs, SUTs, Traffic orientation and distribution,
-bursts, loads, forwarding rates, etc.
-
-.. 3.2.5.3.4
-
-RFC 2889 Benchmarking Methodology for LAN Switching
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2889 outlines a benchmarking methodology for LAN switching, it
-extends RFC 2544. The outlined methodology gathers performance
-metrics for forwarding, congestion control, latency, address handling
-and finally filtering.
-
-.. 3.2.5.3.5
-
-RFC 3918 Methodology for IP Multicast Benchmarking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 3918 outlines a methodology for IP Multicast benchmarking.
-
-.. 3.2.5.3.6
-
-RFC 4737 Packet Reordering Metrics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 4737 describes metrics for identifying and counting re-ordered
-packets within a stream, and metrics to measure the extent each
-packet has been re-ordered.
-
-.. 3.2.5.3.7
-
-RFC 5481 Packet Delay Variation Applicability Statement
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 5481 defined two common, but different forms of delay variation
-metrics, and compares the metrics over a range of networking
-circumstances and tasks. The most suitable form for vSwitch
-benchmarking is the "PDV" form.
-
-.. 3.2.5.3.8
-
-RFC 6201 Device Reset Characterization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 6201 extends the methodology for characterizing the speed of
-recovery of the DUT from device or software reset described in RFC
-2544.
-
-.. 3.2.6:
-
-.. _PassFailCriteria:
-
-Item pass/fail criteria
-=========================
-
-vswitchperf does not specify Pass/Fail criteria for the tests in terms of a
-threshold, as benchmarks do not (and should not do this). The results/metrics
-for a test are simply reported. If it had to be defined, a test is considered
-to have passed if it succesfully completed and a relavent metric was
-recorded/reported for the SUT.
-
-.. 3.2.7:
-
-.. _SuspensionResumptionReqs:
-
-Suspension criteria and resumption requirements
-================================================
-In the case of a throughput test, a test should be suspended if a virtual
-switch is failing to forward any traffic. A test should be restarted from a
-clean state if the intention is to carry out the test again.
-
-.. 3.2.8:
-
-.. _TestDelierables:
-
-Test deliverables
-==================
-Each test should produce a test report that details SUT information as well as
-the test results. There are a number of parameters related to the system, DUT
-and tests that can affect the repeatability of a test results and should be
-recorded. In order to minimise the variation in the results of a test,
-it is recommended that the test report includes the following information:
-
-- Hardware details including:
-
- - Platform details.
- - Processor details.
- - Memory information (see below)
- - Number of enabled cores.
- - Number of cores used for the test.
- - Number of physical NICs, as well as their details (manufacturer,
- versions, type and the PCI slot they are plugged into).
- - NIC interrupt configuration.
- - BIOS version, release date and any configurations that were
- modified.
-
-- Software details including:
-
- - OS version (for host and VNF)
- - Kernel version (for host and VNF)
- - GRUB boot parameters (for host and VNF).
- - Hypervisor details (Type and version).
- - Selected vSwitch, version number or commit id used.
- - vSwitch launch command line if it has been parameterised.
- - Memory allocation to the vSwitch – which NUMA node it is using,
- and how many memory channels.
- - Where the vswitch is built from source: compiler details including
- versions and the flags that were used to compile the vSwitch.
- - DPDK or any other SW dependency version number or commit id used.
- - Memory allocation to a VM - if it's from Hugpages/elsewhere.
- - VM storage type: snapshot/independent persistent/independent
- non-persistent.
- - Number of VMs.
- - Number of Virtual NICs (vNICs), versions, type and driver.
- - Number of virtual CPUs and their core affinity on the host.
- - Number vNIC interrupt configuration.
- - Thread affinitization for the applications (including the vSwitch
- itself) on the host.
- - Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset).
-
-- Memory Details
-
- - Total memory
- - Type of memory
- - Used memory
- - Active memory
- - Inactive memory
- - Free memory
- - Buffer memory
- - Swap cache
- - Total swap
- - Used swap
- - Free swap
-
-- Test duration.
-- Number of flows.
-- Traffic Information:
-
- - Traffic type - UDP, TCP, IMIX / Other.
- - Packet Sizes.
-
-- Deployment Scenario.
-
-**Note**: Tests that require additional parameters to be recorded will
-explicitly specify this.
-
-
-.. 3.3:
-
-.. _TestManagement:
-
-Test management
-=================
-This section will detail the test activities that will be conducted by vsperf
-as well as the infrastructure that will be used to complete the tests in OPNFV.
-
-.. 3.3.1:
-
-Planned activities and tasks; test progression
-=================================================
-A key consideration when conducting any sort of benchmark is trying to
-ensure the consistency and repeatability of test results between runs.
-When benchmarking the performance of a virtual switch there are many
-factors that can affect the consistency of results. This section
-describes these factors and the measures that can be taken to limit
-their effects. In addition, this section will outline some system tests
-to validate the platform and the VNF before conducting any vSwitch
-benchmarking tests.
-
-**System Isolation:**
-
-When conducting a benchmarking test on any SUT, it is essential to limit
-(and if reasonable, eliminate) any noise that may interfere with the
-accuracy of the metrics collected by the test. This noise may be
-introduced by other hardware or software (OS, other applications), and
-can result in significantly varying performance metrics being collected
-between consecutive runs of the same test. In the case of characterizing
-the performance of a virtual switch, there are a number of configuration
-parameters that can help increase the repeatability and stability of
-test results, including:
-
-- OS/GRUB configuration:
-
- - maxcpus = n where n >= 0; limits the kernel to using 'n'
- processors. Only use exactly what you need.
- - isolcpus: Isolate CPUs from the general scheduler. Isolate all
- CPUs bar one which will be used by the OS.
- - use taskset to affinitize the forwarding application and the VNFs
- onto isolated cores. VNFs and the vSwitch should be allocated
- their own cores, i.e. must not share the same cores. vCPUs for the
- VNF should be affinitized to individual cores also.
- - Limit the amount of background applications that are running and
- set OS to boot to runlevel 3. Make sure to kill any unnecessary
- system processes/daemons.
- - Only enable hardware that you need to use for your test – to
- ensure there are no other interrupts on the system.
- - Configure NIC interrupts to only use the cores that are not
- allocated to any other process (VNF/vSwitch).
-
-- NUMA configuration: Any unused sockets in a multi-socket system
- should be disabled.
-- CPU pinning: The vSwitch and the VNF should each be affinitized to
- separate logical cores using a combination of maxcpus, isolcpus and
- taskset.
-- BIOS configuration: BIOS should be configured for performance where
- an explicit option exists, sleep states should be disabled, any
- virtualization optimization technologies should be enabled, and
- hyperthreading should also be enabled, turbo boost and overclocking
- should be disabled.
-
-**System Validation:**
-
-System validation is broken down into two sub-categories: Platform
-validation and VNF validation. The validation test itself involves
-verifying the forwarding capability and stability for the sub-system
-under test. The rationale behind system validation is two fold. Firstly
-to give a tester confidence in the stability of the platform or VNF that
-is being tested; and secondly to provide base performance comparison
-points to understand the overhead introduced by the virtual switch.
-
-* Benchmark platform forwarding capability: This is an OPTIONAL test
- used to verify the platform and measure the base performance (maximum
- forwarding rate in fps and latency) that can be achieved by the
- platform without a vSwitch or a VNF. The following diagram outlines
- the set-up for benchmarking Platform forwarding capability:
-
- .. code-block:: console
-
- __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | l2fw or DPDK L2FWD app | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-* Benchmark VNF forwarding capability: This test is used to verify
- the VNF and measure the base performance (maximum forwarding rate in
- fps and latency) that can be achieved by the VNF without a vSwitch.
- The performance metrics collected by this test will serve as a key
- comparison point for NIC passthrough technologies and vSwitches. VNF
- in this context refers to the hypervisor and the VM. The following
- diagram outlines the set-up for benchmarking VNF forwarding
- capability:
-
- .. code-block:: console
-
- __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-
-**Methodology to benchmark Platform/VNF forwarding capability**
-
-
-The recommended methodology for the platform/VNF validation and
-benchmark is: - Run `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__
-Maximum Forwarding Rate test, this test will produce maximum
-forwarding rate and latency results that will serve as the
-expected values. These expected values can be used in
-subsequent steps or compared with in subsequent validation tests. -
-Transmit bidirectional traffic at line rate/max forwarding rate
-(whichever is higher) for at least 72 hours, measure throughput (fps)
-and latency. - Note: Traffic should be bidirectional. - Establish a
-baseline forwarding rate for what the platform can achieve. - Additional
-validation: After the test has completed for 72 hours run bidirectional
-traffic at the maximum forwarding rate once more to see if the system is
-still functional and measure throughput (fps) and latency. Compare the
-measure the new obtained values with the expected values.
-
-**NOTE 1**: How the Platform is configured for its forwarding capability
-test (BIOS settings, GRUB configuration, runlevel...) is how the
-platform should be configured for every test after this
-
-**NOTE 2**: How the VNF is configured for its forwarding capability test
-(# of vCPUs, vNICs, Memory, affinitization…) is how it should be
-configured for every test that uses a VNF after this.
-
-**Methodology to benchmark the VNF to vSwitch to VNF deployment scenario**
-
-vsperf has identified the following concerns when benchmarking the VNF to
-vSwitch to VNF deployment scenario:
-
-* The accuracy of the timing synchronization between VNFs/VMs.
-* The clock accuracy of a VNF/VM if they were to be used as traffic generators.
-* VNF traffic generator/receiver may be using resources of the system under
- test, causing at least three forms of workload to increase as the traffic
- load increases (generation, switching, receiving).
-
-The recommendation from vsperf is that tests for this sceanario must
-include an external HW traffic generator to act as the tester/traffic transmitter
-and receiver. The perscribed methodology to benchmark this deployment scanrio with
-an external tester involves the following three steps:
-
-#. Determine the forwarding capability and latency through the virtual interface
-connected to the VNF/VM.
-
-.. Figure:: vm2vm_virtual_interface_benchmark.png
-
- Virtual interfaces performance benchmark
-
-#. Determine the forwarding capability and latency through the VNF/hypervisor.
-
-.. Figure:: vm2vm_hypervisor_benchmark.png
-
- Hypervisor performance benchmark
-
-#. Determine the forwarding capability and latency for the VNF to vSwitch to VNF
- taking the information from the previous two steps into account.
-
-.. Figure:: vm2vm_benchmark.png
-
- VNF to vSwitch to VNF performance benchmark
-
-vsperf also identified an alternative configuration for the final step:
-
-.. Figure:: vm2vm_alternative_benchmark.png
-
- VNF to vSwitch to VNF alternative performance benchmark
-
-.. 3.3.2:
-
-Environment/infrastructure
-============================
-Intel is providing a hosted test-bed with nine bare-metal environments
-allocated to different OPNFV projects. Currently a number of servers in
-`Intel POD 3 <https://wiki.opnfv.org/display/pharos/Intel+Pod3>`__ are
-allocated to vsperf:
-
- * pod3-wcp-node3 and pod3-wcp-node4 which are used for CI jobs.
- * pod3-node6 which is used as a vsperf sandbox environment.
-
-vsperf CI
----------
-vsperf CI jobs are broken down into:
-
- * Daily job:
-
- * Runs everyday takes about 10 hours to complete.
- * TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan
- phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'.
- * TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'.
-
- * Merge job:
-
- * Runs whenever patches are merged to master.
- * Runs a basic Sanity test.
-
- * Verify job:
-
- * Runs every time a patch is pushed to gerrit.
- * Builds documentation.
-
-Scripts:
---------
-There are 2 scripts that are part of VSPERFs CI:
-
- * build-vsperf.sh: Lives in the VSPERF repository in the ci/ directory and is
- used to run vsperf with the appropriate cli parameters.
- * vswitchperf.yml: YAML description of our jenkins job. lives in the RELENG
- repository.
-
-More info on vsperf CI can be found here:
-https://wiki.opnfv.org/display/vsperf/VSPERF+CI
-
-.. 3.3.3:
-
-Responsibilities and authority
-===============================
-The group responsible for managing, designing, preparing and executing the
-tests listed in the LTD are the vsperf committers and contributors. The vsperf
-committers and contributors should work with the relavent OPNFV projects to
-ensure that the infrastructure is in place for testing vswitches, and that the
-results are published to common end point (a results database).
-