multi VM: Multi VMs in serial or parallel

Support for deployment scenarios with any number of VMs
in both serial and parallel configuration. Detailed
content of the patch:

* VswitchControllerPXP class for multi VM support
* pvvpxx and pvpvxx deployments for xx VMs in
  serial respective parallel configuration
* special GUEST_ options expansion to requested
  number of VMs;
* support of GUEST_ options specific macros
  #VMINDEX, #MAC(), #IP() and #EVAL()
* all GUEST specific options are turned to lists
  to be VM specific
* support for VM with 1 NIC
* support for VM with multiple NIC pairs; traffic
  is routed in serial or parallel between NIC paris
  based on deployment scenario
* support for PVVP and PVPV scenarios using VMs
  with different numbers of NICs

JIRA: VSPERF-361

Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>

1 files changed, 0 insertions, 118 deletions

diff --git a/core/vswitch_controller_pvp.py b/core/vswitch_controller_pvp.py
deleted file mode 100644
index a4f61961..00000000
--- a/core/vswitch_controller_pvp.py
+++ /dev/null
@@ -1,118 +0,0 @@
-# Copyright 2015 Intel Corporation.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""VSwitch controller for Physical to VM to Physical deployment
-"""
-
-import logging
-
-from core.vswitch_controller import IVswitchController
-from vswitches.utils import add_ports_to_flow
-from conf import settings
-
-_FLOW_TEMPLATE = {
-    'idle_timeout': '0'
-}
-
-class VswitchControllerPVP(IVswitchController):
-    """VSwitch controller for PVP deployment scenario.
-
-    Attributes:
-        _vswitch_class: The vSwitch class to be used.
-        _vswitch: The vSwitch object controlled by this controller
-        _deployment_scenario: A string describing the scenario to set-up in the
-            constructor.
-    """
-    def __init__(self, vswitch_class, traffic):
-        """Initializes up the prerequisites for the PVP deployment scenario.
-
-        :vswitch_class: the vSwitch class to be used.
-        """
-        self._logger = logging.getLogger(__name__)
-        self._vswitch_class = vswitch_class
-        self._vswitch = vswitch_class()
-        self._deployment_scenario = "PVP"
-        self._traffic = traffic.copy()
-        self._logger.debug('Creation using ' + str(self._vswitch_class))
-
-    def setup(self):
-        """ Sets up the switch for pvp
-        """
-        self._logger.debug('Setup using ' + str(self._vswitch_class))
-
-        try:
-            self._vswitch.start()
-
-            bridge = settings.getValue('VSWITCH_BRIDGE_NAME')
-            self._vswitch.add_switch(bridge)
-
-            (_, phy1_number) = self._vswitch.add_phy_port(bridge)
-            (_, phy2_number) = self._vswitch.add_phy_port(bridge)
-            (_, vport1_number) = self._vswitch.add_vport(bridge)
-            (_, vport2_number) = self._vswitch.add_vport(bridge)
-
-            self._vswitch.del_flow(bridge)
-
-            # configure flows according to the TC definition
-            flow_template = _FLOW_TEMPLATE.copy()
-            if self._traffic['flow_type'] == 'IP':
-                flow_template.update({'dl_type':'0x0800', 'nw_src':self._traffic['l3']['srcip'],
-                                      'nw_dst':self._traffic['l3']['dstip']})
-
-            flow1 = add_ports_to_flow(flow_template, phy1_number,
-                                      vport1_number)
-            flow2 = add_ports_to_flow(flow_template, vport2_number,
-                                      phy2_number)
-            self._vswitch.add_flow(bridge, flow1)
-            self._vswitch.add_flow(bridge, flow2)
-
-            if self._traffic['bidir'] == 'True':
-                flow3 = add_ports_to_flow(flow_template, phy2_number,
-                                          vport2_number)
-                flow4 = add_ports_to_flow(flow_template, vport1_number,
-                                          phy1_number)
-                self._vswitch.add_flow(bridge, flow3)
-                self._vswitch.add_flow(bridge, flow4)
-
-        except:
-            self._vswitch.stop()
-            raise
-
-    def stop(self):
-        """Tears down the switch created in setup().
-        """
-        self._logger.debug('Stop using ' + str(self._vswitch_class))
-        self._vswitch.stop()
-
-    def __enter__(self):
-        self.setup()
-
-    def __exit__(self, type_, value, traceback):
-        self.stop()
-
-    def get_vswitch(self):
-        """See IVswitchController for description
-        """
-        return self._vswitch
-
-    def get_ports_info(self):
-        """See IVswitchController for description
-        """
-        self._logger.debug('get_ports_info  using ' + str(self._vswitch_class))
-        return self._vswitch.get_ports(settings.getValue('VSWITCH_BRIDGE_NAME'))
-
-    def dump_vswitch_flows(self):
-        """See IVswitchController for description
-        """
-        self._vswitch.dump_flows(settings.getValue('VSWITCH_BRIDGE_NAME'))