diff options
author | Martin Klozik <martinx.klozik@intel.com> | 2016-12-14 14:02:43 +0000 |
---|---|---|
committer | Martin Klozik <martinx.klozik@intel.com> | 2017-01-16 08:50:02 +0000 |
commit | 4481df385ac03ece015ccb429201f96189dc5ae2 (patch) | |
tree | a959a804e7b1efd663dbb24a447609421e339211 /conf | |
parent | cafcb9f24b422a4b3a0b19ba00c83fe2819dcbaa (diff) |
traffic: Configurable traffic details
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
Diffstat (limited to 'conf')
-rwxr-xr-x | conf/01_testcases.conf | 172 | ||||
-rw-r--r-- | conf/03_traffic.conf | 137 | ||||
-rw-r--r-- | conf/__init__.py | 67 | ||||
-rw-r--r-- | conf/integration/01_testcases.conf | 80 |
4 files changed, 326 insertions, 130 deletions
diff --git a/conf/01_testcases.conf b/conf/01_testcases.conf index a8d7a136..bdaeb4da 100755 --- a/conf/01_testcases.conf +++ b/conf/01_testcases.conf @@ -19,60 +19,12 @@ # # "Name": "phy2phy_burst", # A human-readable string identifying the # # test. -# "Traffic Type": "rfc2544_throughput", -# # One of the supported traffic types. -# # It can be overridden by cli option traffic_type. # "Deployment": "p2p", # One of the supported deployment scenarios. # "Description": "Lorem ipsum..." # Optional. A human-readable string # # describing the test. # "Frame Modification": "vlan" # One of the supported frame modifications: # # vlan, mpls, mac, dscp, ttl, ip_addr, # # ip_port. -# "biDirectional": ["True"|"False"] -# # Specifies if generated traffic will be -# # full-duplex (True) or half-duplex (False) -# # It can be overridden by cli option bidirectional. -# # Default value is "False". Must be of type -# # string. -# "MultiStream": 0-65535 # Optional. Defines number of flows simulated -# # by traffic generator. Value 0 disables -# # MultiStream feature -# # It can be overridden by cli option multistream. -# "Stream Type": ["L2"|"L3"|"L4"] # Optional. Stream Type is an extension -# # of the "MultiStream" feature. If MultiStream -# # is disabled, then Stream Type will be ignored. -# # Stream Type defines ISO OSI network layer -# # used for simulation of multiple streams. -# # It can be overridden by cli option stream_type. -# # Values: -# # "L2" - iteration of destination MAC address -# # "L3" - iteration of destination IP address -# # "L4" - iteration of destination port -# # of selected transport protocol -# # Default value is "L4". -# "Pre-installed Flows": ["Yes"|"No"] -# # Optional. Pre-installed Flows is an extension -# # of the "MultiStream" feature. If MultiStream -# # is disabled, then Pre-installed Flows will be -# # ignored. It defines if stream specific flows -# # will be inserted into OVS or not. -# # It can be overridden by cli option -# # pre-installed_flows -# # Values: -# # "Yes" - flows will be inserted into OVS -# # "No" - flows won't be inserted into OVS -# # Default value is "No". -# "Flow Type": ["port"|"IP"] # Optional. Defines flows complexity. In case -# # it isn't specified, then "port" will be used. -# # Values: -# # "port" - flow is defined by ingress ports -# # "IP" - flow is defined by ingress ports -# # and src and dst IP addresses -# "iLoad": 0-100 # Optional. Defines desired percentage -# # of frame rate used during continuous stream -# # tests. Can be overridden by cli option -# # iload. -# # Default value is 100. # "Load": dictionary # Optional. Configures background load # # during testcase execution. # Description of "Load" dictionary keys, their meanings and available values: @@ -115,7 +67,7 @@ # # stated in configuration files or value # # specified on command line through --trafficgen # # parameter. -# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)} +# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)}, # # Dictionary with testcase specific configuration # # environment. Specified parameters will be modified # # before the test execution and their original values will @@ -129,128 +81,172 @@ PERFORMANCE_TESTS = [ { "Name": "phy2phy_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_forwarding", - "Traffic Type": "rfc2889", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Forwarding.RFC2889.MaxForwardingRate", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2889", + }, + }, }, { "Name": "back2back", - "Traffic Type": "rfc2544_back2back", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "phy2phy_tput_mod_vlan", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", "Frame Modification": "vlan", - "biDirectional": "False", - "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification" + "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "p2p", "Description": "Phy2Phy Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvp_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvp", "Description": "PVP Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvvp_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvvp", "Description": "PVVP Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "pvpv_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "pvpv", "Description": "Two VMs in parallel with Continuous Stream", - "biDirectional": "True", - "iLoad": "100", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "frame_rate" : 100, + }, + }, }, { "Name": "phy2phy_scalability", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Scalability.Flows.RFC2544.0PacketLoss", - "MultiStream": "8000", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + "multistream" : "8000", + }, + }, }, { "Name": "pvp_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "pvp", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "pvp_back2back", - "Traffic Type": "rfc2544_back2back", "Deployment": "pvp", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "pvvp_tput", - "Traffic Type": "rfc2544_throughput", "Collector": "cpu", "Deployment": "pvvp", "Description": "LTD.Throughput.RFC2544.PacketLossRatio", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "pvvp_back2back", - "Traffic Type": "rfc2544_back2back", "Collector": "cpu", "Deployment": "pvvp", "Description": "LTD.Throughput.RFC2544.BackToBackFrames", - "biDirectional": "True", + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_back2back", + }, + }, }, { "Name": "phy2phy_cpu_load", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.CPU.RFC2544.0PacketLoss", "Load" : { "tool" : "stress-ng", "load" : 100, "reserved" : 4, "pattern" : "c", - } + }, + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, { "Name": "phy2phy_mem_load", - "Traffic Type": "rfc2544_throughput", "Deployment": "p2p", - "biDirectional": "True", "Description": "LTD.Memory.RFC2544.0PacketLoss", "Load" : { "tool" : "stress-ng", "load" : 50, "pattern" : "m", "load_memory" : 80, - } + }, + "Parameters" : { + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + }, + }, }, - ] diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf index 87210b8d..72324660 100644 --- a/conf/03_traffic.conf +++ b/conf/03_traffic.conf @@ -19,6 +19,143 @@ # log file for all traffic generator related commands LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log' +# TRAFFIC dictionary defines traffic parameters used by all traffic generators. +# Detailed description of TRAFFIC dictionary items follows: +# +# 'traffic_type' - One of the supported traffic types. +# E.g. rfc2544_throughput, rfc2544_back2back +# or rfc2544_continuous +# Data type: str +# Default value: "rfc2544_throughput". +# 'bidir' - Specifies if generated traffic will be full-duplex (True) +# or half-duplex (False) +# Data type: str +# Supported values: "True", "False" +# Default value: "False". +# 'frame_rate' - Defines desired percentage of frame rate used during +# continuous stream tests. +# Data type: int +# Default value: 100. +# 'multistream' - Defines number of flows simulated by traffic generator. +# Value 0 disables multistream feature +# Data type: int +# Supported values: 0-65535 +# Default value: 0. +# 'stream_type' - Stream type is an extension of the "multistream" feature. +# If multistream is disabled, then stream type will be +# ignored. Stream type defines ISO OSI network layer used +# for simulation of multiple streams. +# Data type: str +# Supported values: +# "L2" - iteration of destination MAC address +# "L3" - iteration of destination IP address +# "L4" - iteration of destination port +# of selected transport protocol +# Default value: "L4". +# 'pre_installed_flows' +# - Pre-installed flows is an extension of the multistream" +# feature. If multistream is disabled, then pre-installed +# flows will be ignored. It defines if stream specific flows +# will be inserted into OVS or not. +# Data type: str +# Supported values: +# "Yes" - flows will be inserted into OVS +# "No" - flows won't be inserted into OVS +# Default value: "No". +# 'flow_type' - Defines flows complexity. +# Data type: str +# Supported values: +# "port" - flow is defined by ingress ports +# "IP" - flow is defined by ingress ports +# and src and dst IP addresses +# Default value: "port" +# 'l2' - A dictionary with l2 network layer details. Supported +# values are: +# 'srcmac' - Specifies source MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "00:00:00:00:00:00". +# 'dstmac' - Specifies destination MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "00:00:00:00:00:00". +# 'framesize' - Specifies default frame size. This value should not be +# changed directly. It will be overridden during testcase +# execution by values specified by list TRAFFICGEN_PKT_SIZES. +# Data type: int +# Default value: 64 +# 'l3' - A dictionary with l3 network layer details. Supported +# values are: +# 'srcip' - Specifies source MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "1.1.1.1". +# 'dstip' - Specifies destination MAC address filled by traffic generator. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: str +# Default value: "90.90.90.90". +# 'proto' - Specifies deflaut protocol type. +# Please check particular traffic generator implementation +# for supported protocol types. +# Data type: str +# Default value: "udp". +# 'l4' - A dictionary with l4 network layer details. Supported +# values are: +# 'srcport' - Specifies source port of selected transport protocol. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: int +# Default value: 3000 +# 'dstport' - Specifies destination port of selected transport protocol. +# NOTE: It can be modified by vsperf in some scenarios. +# Data type: int +# Default value: 3001 +# 'vlan' - A dictionary with vlan encapsulation details. Supported +# values are: +# 'enabled' - Specifies if vlan encapsulation should be enabled or +# disabled. +# Data type: bool +# Default value: False +# 'id' - Specifies vlan id. +# Data type: int (NOTE: must fit to 12 bits) +# Default value: 0 +# 'priority' - Specifies a vlan priority (PCP header field). +# Data type: int (NOTE: must fit to 3 bits) +# Default value: 0 +# 'cfi' - Specifies if frames can or cannot be dropped during +# congestion (DEI header field). +# Data type: int (NOTE: must fit to 1 bit) +# Default value: 0 +TRAFFIC = { + 'traffic_type' : 'rfc2544_throughput', + 'frame_rate' : 100, + 'bidir' : 'True', # will be passed as string in title format to tgen + 'multistream' : 0, + 'stream_type' : 'L4', + 'pre_installed_flows' : 'No', # used by vswitch implementation + 'flow_type' : 'port', # used by vswitch implementation + + 'l2': { + 'framesize': 64, + 'srcmac': '00:00:00:00:00:00', + 'dstmac': '00:00:00:00:00:00', + }, + 'l3': { + 'proto': 'udp', + 'srcip': '1.1.1.1', + 'dstip': '90.90.90.90', + }, + 'l4': { + 'srcport': 3000, + 'dstport': 3001, + }, + 'vlan': { + 'enabled': False, + 'id': 0, + 'priority': 0, + 'cfi': 0, + }, +} + #path to traffic generators directory. TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen') diff --git a/conf/__init__.py b/conf/__init__.py index 2448d390..2a2586ff 100644 --- a/conf/__init__.py +++ b/conf/__init__.py @@ -20,6 +20,7 @@ and any user provided settings file. # pylint: disable=invalid-name +import copy import os import re import logging @@ -30,8 +31,7 @@ import netaddr _LOGGER = logging.getLogger(__name__) # Special test parameters which are not part of standard VSPERF configuration -_EXTRA_TEST_PARAMS = ['bidirectional', 'traffic_type', 'iload', 'tunnel_type', - 'multistream', 'stream_type', 'pre-installed_flows'] +_EXTRA_TEST_PARAMS = ['TUNNEL_TYPE'] # regex to parse configuration macros from 04_vnf.conf # it will select all patterns starting with # sign @@ -57,9 +57,19 @@ class Settings(object): return getattr(self, attr) else: master_value = getattr(self, attr) - # Check if parameter value was overridden by CLI option + # Check if parameter value was modified by CLI option cli_value = get_test_param(attr, None) - return cli_value if cli_value else master_value + if cli_value: + # TRAFFIC dictionary is not overridden by CLI option + # but only updated by specified values + if attr == 'TRAFFIC': + tmp_value = copy.deepcopy(master_value) + tmp_value = merge_spec(tmp_value, cli_value) + return tmp_value + else: + return cli_value + else: + return master_value else: raise AttributeError("%r object has no attribute %r" % (self.__class__, attr)) @@ -137,7 +147,12 @@ class Settings(object): """ for key in conf: if conf[key] is not None: - setattr(self, key.upper(), conf[key]) + if isinstance(conf[key], dict): + # recursively update dict items, e.g. TEST_PARAMS + setattr(self, key.upper(), + merge_spec(getattr(self, key.upper()), conf[key])) + else: + setattr(self, key.upper(), conf[key]) def load_from_env(self): """ @@ -271,17 +286,33 @@ def get_test_param(key, default=None): :returns: Value for ``key`` if found, else ``default``. """ test_params = settings.getValue('TEST_PARAMS') - if key in test_params: - if not isinstance(test_params.get(key), str): - return test_params.get(key) + return test_params.get(key, default) if test_params else default + +def merge_spec(orig, new): + """Merges ``new`` dict with ``orig`` dict, and returns orig. + + This takes into account nested dictionaries. Example: + + >>> old = {'foo': 1, 'bar': {'foo': 2, 'bar': 3}} + >>> new = {'foo': 6, 'bar': {'foo': 7}} + >>> merge_spec(old, new) + {'foo': 6, 'bar': {'foo': 7, 'bar': 3}} + + You'll notice that ``bar.bar`` is not removed. This is the desired result. + """ + for key in orig: + if key not in new: + continue + + # Not allowing derived dictionary types for now + # pylint: disable=unidiomatic-typecheck + if type(orig[key]) == dict: + orig[key] = merge_spec(orig[key], new[key]) else: - # values are passed inside string from CLI, so we must retype them accordingly - try: - return ast.literal_eval(test_params.get(key)) - except ValueError: - # for backward compatibility, we have to accept strings without quotes - _LOGGER.warning("Adding missing quotes around string value: %s = %s", - key, str(test_params.get(key))) - return str(test_params.get(key)) - else: - return default + orig[key] = new[key] + + for key in new: + if key not in orig: + orig[key] = new[key] + + return orig diff --git a/conf/integration/01_testcases.conf b/conf/integration/01_testcases.conf index ff05186b..504b4458 100644 --- a/conf/integration/01_testcases.conf +++ b/conf/integration/01_testcases.conf @@ -25,15 +25,15 @@ SUPPORTED_TUNNELING_PROTO = ['vxlan', 'gre', 'geneve'] # # Required for OP2P tests # "Tunnel Type": ["vxlan"|"gre"|"geneve"] # Tunnel Type defines tunneling protocol to use. -# # It can be overridden by cli option tunnel_type. +# # It can be overridden by cli option TUNNEL_TYPE. # # Values: # # "vxlan" - iteration of destination MAC address # # "gre" - iteration of destination IP address # # "geneve" - iteration of destination UDP port # # Default value is "vxlan". # -# biDirectional testing for OP2P is not yet supported. -# biDirectional must be set to False. +# bidirectional testing for OP2P is not yet supported. +# TRAFFIC['bidir'] must be set to 'False'. # # "TestSteps": [] # Definition of integration test steps. # # In case that this list is defined, then @@ -320,55 +320,75 @@ STEP_VSWITCH_2PHY_6VM_FINIT = [ INTEGRATION_TESTS = [ { "Name": "overlay_p2p_mod_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "ptunp", - "biDirectional": 'True', "Tunnel Type": "vxlan", "Description": ("Tunneling Throughput RFC2544 Test." "The encap and decap are performed inside the " "virtual switch itself in each direction to avoid " "the need of ingress overlay traffic."), - "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, + "Parameters": { + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl", + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + "bidir" : "False", + }, + }, }, { "Name": "overlay_p2p_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "op2p", - "biDirectional": 'False', "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "encapsulation", "Description": "Overlay Encapsulation Throughput RFC2544 Test", - "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, + "Parameters": { + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl", + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + "bidir" : "False", + }, + }, }, { "Name": "overlay_p2p_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "op2p", - "biDirectional": 'False', "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "encapsulation", "Description": "Overlay Encapsulation RFC2544 Continuous Stream", - "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, + "Parameters": { + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl", + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "bidir" : "False", + }, + }, }, { "Name": "overlay_p2p_decap_tput", - "Traffic Type": "rfc2544_throughput", "Deployment": "op2p", - "biDirectional": 'False', "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "decapsulation", "Description": "Overlay Decapsulation Throughput RFC2544 Test", - "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, + "Parameters": { + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl", + "TRAFFIC" : { + "traffic_type" : "rfc2544_throughput", + "bidir" : "False", + }, + }, }, { "Name": "overlay_p2p_decap_cont", - "Traffic Type": "rfc2544_continuous", "Deployment": "op2p", - "biDirectional": 'False', "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "decapsulation", "Description": "Overlay Decapsulation RFC2544 Continuous Stream", - "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, + "Parameters": { + "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl", + "TRAFFIC" : { + "traffic_type" : "rfc2544_continuous", + "bidir" : "False", + }, + }, }, { "Name": "vswitch_add_del_bridge", @@ -758,8 +778,12 @@ INTEGRATION_TESTS = [ "Name": "2pvp_udp_dest_flows", "Description": "RFC2544 Continuous TC with 2 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", - "Stream Type": "L4", - "MultiStream": 2, + "Parameters" : { + "TRAFFIC" : { + "multistream" : 2, + "stream_type" : "L4", + }, + }, "TestSteps": STEP_VSWITCH_2PHY_2VM_INIT + STEP_VSWITCH_2_PARALLEL_VM_FLOWS_INIT + [ # Start 2 VMs @@ -781,8 +805,12 @@ INTEGRATION_TESTS = [ "Name": "4pvp_udp_dest_flows", "Description": "RFC2544 Continuous TC with 4 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", - "Stream Type": "L4", - "MultiStream": 4, + "Parameters" : { + "TRAFFIC" : { + "multistream" : 4, + "stream_type" : "L4", + }, + }, "TestSteps": STEP_VSWITCH_2PHY_4VM_INIT + STEP_VSWITCH_4_PARALLEL_VM_FLOWS_INIT + [ # Start 4 VMs @@ -808,8 +836,12 @@ INTEGRATION_TESTS = [ "Name": "6pvp_udp_dest_flows", "Description": "RFC2544 Continuous TC with 6 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", - "Stream Type": "L4", - "MultiStream": 6, + "Parameters" : { + "TRAFFIC" : { + "multistream" : 6, + "stream_type" : "L4", + }, + }, "TestSteps": STEP_VSWITCH_2PHY_6VM_INIT + STEP_VSWITCH_6_PARALLEL_VM_FLOWS_INIT + [ # Start VMs |