# Built via Makefile
overcloud.yaml
overcloud-with-block-storage.yaml
overcloud-with-block-storage-nfs.yaml
undercloud-bm.yaml
undercloud-vm.yaml
undercloud-vm-ironic.yaml
undercloud-vm-ironic-vlan.yaml
*.py[cod]
# C extensions
*.so
# Packages
*.egg
*.egg-info
dist
build
eggs
parts
bin
var
sdist
develop-eggs
.installed.cfg
lib
lib64
# Installer logs
pip-log.txt
# Unit test / coverage reports
.coverage
.tox
nosetests.xml
# Translations
*.mo
# Mr Developer
.mr.developer.cfg
.project
.pydevproject
*~
*.swp
doc/_build
# Built by pbr (python setup.py sdist):
AUTHORS
ChangeLog
# Copyright 2015 Intel Corporation.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#RTE_TARGET = '' # the relevant DPDK build target
# traffic generator to use in tests
#TRAFFICGEN = 'TestCenter'
TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
#TRAFFICGEN = 'Moongen'
#TRAFFICGEN = 'Trex'
###########################################
# Spirent TestCenter Configuration -- BEGIN
TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93"
TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96"
TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70"
TRAFFICGEN_STC_EAST_SLOT_NUM = "1"
TRAFFICGEN_STC_EAST_PORT_NUM = "1"
TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3"
TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103"
TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70"
TRAFFICGEN_STC_WEST_SLOT_NUM = "1"
TRAFFICGEN_STC_WEST_PORT_NUM = "2"
TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103"
TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3"
# Spirent TestCenter Configuration -- END
#########################################
# Ixia/IxNet configuration
TRAFFICGEN_IXIA_CARD = ''
TRAFFICGEN_IXIA_PORT1 = ''
TRAFFICGEN_IXIA_PORT2 = ''
TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
TRAFFICGEN_IXNET_LIB_PATH = '/opt/ixnet/IxTclNetwork'
# Ixia traffic generator
TRAFFICGEN_IXIA_HOST = '' # quad dotted ip address
# host where IxNetwork GUI/daemon runs
TRAFFICGEN_IXNET_MACHINE = '' # quad dotted ip address
TRAFFICGEN_IXNET_PORT = ''
TRAFFICGEN_IXNET_USER = ''
# paths to shared directory for IXIA_HOST and DUT (localhost)
TRAFFICGEN_IXNET_TESTER_RESULT_DIR = ''
TRAFFICGEN_IXNET_DUT_RESULT_DIR = ''
# Xena traffic generator connection info
TRAFFICGEN_XENA_IP = ''
TRAFFICGEN_XENA_PORT1 = ''
TRAFFICGEN_XENA_PORT2 = ''
TRAFFICGEN_XENA_USER = ''
TRAFFICGEN_XENA_PASSWORD = ''
TRAFFICGEN_XENA_MODULE1 = ''
TRAFFICGEN_XENA_MODULE2 = ''
# Xena Port IP info
TRAFFICGEN_XENA_PORT0_IP = '192.168.199.10'
TRAFFICGEN_XENA_PORT0_CIDR = 24
TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
# Xena RFC 2544 options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
# Xena RFC 2544 final verification options
TRAFFICGEN_XENA_RFC2544_VERIFY = False
TRAFFICGEN_XENA_RFC2544_VERIFY_DURATION = 120 # in seconds
# Number of verify attempts before giving up...
TRAFFICGEN_XENA_RFC2544_MAXIMUM_VERIFY_ATTEMPTS = 10
# Logic for restarting binary search, see documentation for details
TRAFFICGEN_XENA_RFC2544_BINARY_RESTART_SMART_SEARCH = True
# Xena Continuous traffic options
# Please reference xena documentation before making changes to these settings
TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = True
TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
###################################################
# MoonGen Configuration and Connection Info-- BEGIN
# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ""
TRAFFICGEN_MOONGEN_USER = "root"
TRAFFICGEN_MOONGEN_BASE_DIR = "/root/MoonGen"
TRAFFICGEN_MOONGEN_PORTS = "{0,1}"
# Ex. 10 Gbps: TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
# Today only 10 Gbps is supported
TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
# MoonGen Configuration and Connection Info-- END
###################################################
###################################################
# TREX Configuration and Connection Info-- BEGIN
# Example: TRAFFICGEN_TREX_HOST_IP_ADDR = "192.10.1.1"
# Example: TRAFFICGEN_TREX_USER = 'root'
# Example: TRAFFICGEN_TREX_BASE_DIR = '/traffic_gen/trex/'
# Example: TRAFFICGEN_TREX_PORT1 = '00:00:00:00:00:00'
TRAFFICGEN_TREX_HOST_IP_ADDR = ''
TRAFFICGEN_TREX_USER = ''
TRAFFICGEN_TREX_BASE_DIR = ''
TRAFFICGEN_TREX_PORT1 = ''
TRAFFICGEN_TREX_PORT2 = ''
# Latency statistics are collected by separate stream created for each interface.
# Parameter below defines frequency of packets used for latency measurement in PPS.
# Value 0 will disable latency specific streams.
TRAFFICGEN_TREX_LATENCY_PPS = 1000
# Enablement of learning packets before sending test traffic
TRAFFICGEN_TREX_LEARNING_MODE = True
TRAFFICGEN_TREX_LEARNING_DURATION = 5
# FOR SR-IOV or multistream layer 2 tests to work with T-Rex enable Promiscuous mode
TRAFFICGEN_TREX_PROMISCUOUS = False
# Enable below options to force T-rex api to attempt to use speed specified on server
# side when pushing traffic. For 40G use 40000. For 25G use 25000.
TRAFFICGEN_TREX_FORCE_PORT_SPEED = False
TRAFFICGEN_TREX_PORT_SPEED = 10000 # 10G
# TRex validation option for RFC2544
TRAFFICGEN_TREX_VERIFICATION_MODE = False
TRAFFICGEN_TREX_VERIFICATION_DURATION = 60
TRAFFICGEN_TREX_MAXIMUM_VERIFICATION_TRIALS = 10
# TREX Configuration and Connection Info-- END
####################################################
####################################################
#TEST_PARAMS = {'TRAFFICGEN_PKT_SIZES':(64,)}
OPNFV_INSTALLER = "Fuel"
OPNFV_URL = "http://testresults.opnfv.org/test/api/v1"
PACKAGE_LIST = "src/package-list.mk"
# Binary package configuration for RHEL 7.3 systems with Vanilla OVS
####################################################################
# Uncomment these lines for binary usage of Vanilla OVS.
#PATHS['vswitch']['ovs_var_tmp'] = '/var/run/openvswitch/'
#PATHS['vswitch']['ovs_etc_tmp'] = '/etc/openvswitch/'
#PATHS['vswitch']['OvsVanilla']['bin']['modules'] = [
# 'libcrc32c', 'ip_tunnel', 'vxlan', 'gre', 'nf_nat', 'nf_nat_ipv6',
# 'nf_nat_ipv4', 'nf_conntrack', 'nf_defrag_ipv4', 'nf_defrag_ipv6',
# 'openvswitch']
#PATHS['vswitch']['OvsVanilla']['type'] = 'bin'
