Age | Commit message (Collapse) | Author | Files | Lines |
|
All files, which do not comply to Apache 2.0 license,
are moved into dedicated 3rd_party directory. This will
simplify license checks performed on vsperf code.
It is not required to move l2fwd module from its
current location.
JIRA: VSPERF-413
Change-Id: I6b4bd6bb5542e6db9a7ef91ee3f5f2907f93e9b8
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Both documentation and traffic generator API are updated
to match current code logic. Additional default values
are added into TRAFFIC_DEFAULTS dictionary. Constructor
of TestCase class uses default values from TRAFFIC_DEFAULTS
instead of magic numbers.
Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6
JIRA: VSPERF-253
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
The patch introduces frame_loss_percent result value.
The implementation is done for Ixia and IxNet
traffic generators. The value is visible in list
of result values at the end of the test, in csv,
rst and md files.
JIRA: VSPERF-201
Change-Id: I9b6795d427b199cb62ed66b7a137e412e36dc757
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
|
|
Measure OVS DPDK VXLAN decapsulation performance.
The DUT is configured as a VTEP (VXLAN Tunnel Endpoint)
which performs decapsulation of frames and sends traffic to
the 2nd traffic generator port.
This test is unidirectional.
Recent changes:
* Userguide update
* Move src/dstport from L2 to L4 (conf, TCL)
* Fix 'TestCase' object has no attribute '_tunnel_operation' error when
running non overlay tests
* Fix merge conflict
* Move doc to docs/userguide/integration.rst
* Add setting of DUT_NIC1_MAC and setting of other
variables to docs/userguide/integration.rst
Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c
JIRA: VSPERF-190
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com>
Signed-off-by: Timo Puha <timox.puha@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com
|
|
Update the default duration of a back to back test to be 2 seconds which
is the minimum recommended by RFC2544, and update the Trials to be 50,
which is also the default value specified by the RFC. This patch also
fixes the tcl script to allow for the minimum framesize to be sent from
the traffic gen.
JIRA:
Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
|
|
Streams used by scalability testcases can be simulated
at different network layers by modification of destination
MAC address (L2), destination IP address (L3) or destination
UDP port (L4). It is possible to define number and type
of the streams by testcase definition by options "MultiStream"
and "Stream Type" or by CLI parameters "multistream" and
"stream_type". CLI options override testcase definition.
Number of streams, their types, used transport protocol
and indication of pre-installed flows are written to both
result CSV file and MD file with test report.
Default transport protocol was changed to UDP because
IxNetwork configuration script doesn't support TCP yet.
Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1
JIRA: VSPERF-81
JIRA: VSPERF-82
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Change throughput_tx_* references to tx_rate_* so the results won't be
confusing as part of the opnfv test dashboard when they become
publicly available.
Change-Id: Ie8cfae99a75497f15eb09d097c72c8a35df3b5f9
JIRA: VSPERF-135
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Allow a configurable duration for all send functions.
JIRA: VSPERF-125
Change-Id: I7c6f5d136a7d7100e3990f7fdc00121b07081a80
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
|
|
Two sample contionous stream testcaes were introduced for PVP and PVVP
scenarios. Required frame rate percentage can be specified either by
tetcase configuration option "iLoad" or by command line option "iload".
Command line option take precendece to testcase option. By default 100%
linerate is used if not specified otherwise.
Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b
JIRA: VSPERF-95
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Since vsperf (ixnet trafficgen) started using AggResults.csv
to pull out traffic results after bi-dir support was added.
Some of the derived results are wrong (derived meaning
these are figures vsperf calculates from the info available
in the raw ixnet results).
JIRA: VSPERF-88
Change-Id: I79d88bfc7718bda675d2ba7e5148053405a94211
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
This test adds a multistream config item,
taking the required number of flows to setup in the traffic,
to the existing testcase and then running the standard
2544 Throughput test. The config is plumbed through
from the 01_testcase.conf via ITraffic to the IxNet.
01_testcase.conf contains new parameter MultiStream
for 2544 Throughput test.
JIRA: VSPERF-19
Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Implement a simple performance test that sends a continuous
stream of traffic to the vSwitch at line rate for 30 seconds
and measures the throughput
Note: there is issue with calculating of the Tx Fps and Mbps
based on the results from the IxNetwork traffic generator.
This issue will be fixed in a later patch.
JIRA: VSPERF-27
Change-Id: Ic72225888735d33398a602462af159e901fb5957
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
This change introduces new parameter which sets the communication
between ports either uni-directional or bi-directional.
JIRA: VSPERF-27
Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
|
|
Parsing of path with IxNetwork test results has been fixed
to accept also windows drive letter. Change affects parsing
of TRAFFICGEN_IXNET_TESTER_RESULT_DIR configuration parameter.
Modified file:
* tools/pkt_gen/ixnet/ixnet.py
JIRA: VSPERF-27
Change-Id: I3dd6123e051952e6fd3f83cd9691341472d2960e
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Add RFC2544.BackToBackFrames test and fix pylint errors.
Remove irrelevant values of back to back test results.
JIRA: VSPERF-46
Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Martin Klozik<martinx.klozik@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This commit adds the vSwitch Integration Test Framework whose
design, based off TOIT, is outlined in the HLD previously made
availiable to the community for review.
The design of this framework allows developers to add different
implementations of components, specifically vSwitches, Traffic
Generators, Metrics Collectors and VNFs, easily.
The goal of this design is that all testcases should run regardless of
what is "under the hood".
This commit adds support for running the framework for a phy to phy
RFC2544 testcase only. More testcases will be added by the community.
vSwitches supported at this time:
* Intel DPDK (r) accelerated OpenvSwitch
Traffic Generators supported at this time:
* IxNet - IxNetwork Implementation
* Ixia - IxExplorer Implementation
* Dummy - Manual Implementation
Metrics Collectors supported at this time:
* Linux Metrics
No VNFs are supported at this time but the framework outlines how they
should be integrated and provides APIs for them to adhere to.
JIRA: VSPERF-27
Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0
Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com>
Signed-off-by: Meghan Halton <Meghan.Halton@intel.com>
Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com>
Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com>
Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com>
Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com>
Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com>
Signed-off-by: Timo Puha <TimoX.Puha@intel.com>
Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com>
Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com>
Signed-off-by: Rory Sexton <Rory.Sexton@intel.com>
Signed-off-by: Ian Stokes <Ian.Stokes@intel.com>
Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Aihua Li <aihua.li@huawei.com>
|