Age | Commit message (Collapse) | Author | Files | Lines |
|
Patch adds testcase mapping among native VSPERF VPP TCs and appropriate
TC names defined in results DB.
JIRA: VSPERF-488
Change-Id: I5c4a50587a354a741c738d255105726943a701f5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
Reviewed-by: Morgan Richomme <morgan.richomme@orange.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Updated RFC description based on IETF approval of Internet Draft
Change-Id: Ifd37da946866f350b8968bbbe8c5a3f5ce762cfa
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
Adds driverctl as a binding tool option for dpdk devices. JIRA
ticket contains test results to verify it works when using
dpdk-devbind or driverctl.
JIRA: VSPERF-525
Change-Id: Ia7a6e43a4b6fb3ba21f5d87d601f4ea4b95b7dab
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
A set of tests was introduced with focus on L3, L4 and VxLAN performance
of OVS and VPP. New testcases were created for phy2phy network scenario.
In case of PVP and PVVP, only OVS testcases are available.
Notes:
* two sets of OVS P2P testcases were created, one creates unique flow
for each IP address involved in the test (performance sensitive);
Second set inserts just one flow with large network mask (tests with
_mask suffix).
* three different types of VPP P2P L3 testcases were created to
demonstrate performance impact of multi ARP entries or IP routes.
* VPP multi ARP record based testcases use a set of "workarounds"
to load a large number of ARP entries. It is not possible to use
"set ip arp count" syntax, as it doesn't work well for large count
values (e.g. 60K)
* OVS VxLAN testcases utilize existing OP2P deployment scenario and thus
it can be used also with GRE and GENEVE tunnel types. Tunnel type
to be used is defined by test configuration option "Tunnel Type".
JIRA: VSPERF-518
Change-Id: I65adad976f12d8625d918a1996eb42693c511ee1
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
|
|
|
|
Support of vhost-user client mode has been added for both
OVS and VPP. VSPERF configures vhost-user server mode
in vswitches by default for backward compatibility.
Support of vhost-user server mode is deprecated
in OVS and it can be removed in future releases. Once it will
happen, we have to change vsperf default behavior to
usage of vhost-user client ports at vswitch side.
This patch also fixes processing of boolean configuration
parameters passed via --test-params option. In the past
it was not possible to set boolean value to False through
--test-params option.
JIRA: VSPERF-517
Change-Id: I65e341f820edd6c720043a4acc74c5140b05db18
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Index file of CI report was restored and paths to it updated
to reflect new documentation structure.
JIRA: VSPERF-514
Change-Id: Id92eb2003a9e6737652313f7ecd03d48a0bfd2ce
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
A set of improvements was introduced to enhance step driven
testcases capabilities.
Details:
* delay among test steps is configurable by TEST_STEP_DELAY
parameter
* step driven tool function exec was renamed to exec_shell
* new step driven tool function exec_python was introduced to execute
a python code
* new step driven object sleep was introduced to pause test execution
for defined number of seconds.
* fixed bug in settings.validate_getValue() to correctly validate
access of parameters modified by TEST_PARAMS
* new #PARAM() macro was introduced to allow references among
configuration parameters
* multistream support has been added into ixnetrfc2544v2.tcl,
which is used for tunneling protocols test (op2p deployment)
* fixed bug in op2p deployment to list interfaces and flows
from both bridges involved in the test
* test report updated to state exact rfcxxxx type of traffic
type, e.g. rfc2544_continuous
* test report of step driven testcases was updated to contain
measured values from traffic generator in CSV report
* method for ovs flow comparison was modified to normalize
IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8)
JIRA: VSPERF-512
Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
|
|
JIRA: VSPERF-510
This patch is used to implement the mechanism to pass extra qemu
cpu options required to achieve better results/performance. Also
used to implement a mechanism to pin the vCPU threads to another
pCPU core which helps in reducing the noise from housekeeping
thread and packet loss.
Change-Id: Ic40fd47d7c4f5556f7e240c6ca671a0535d06ece
Signed-off-by: Gundarapu Kalyan Reddy <reddyx.gundarapu@intel.com>
|
|
Update VPP installation documentation and add note for issue
seen with some installs.
Change-Id: Ib1a2bb5f7b6bb07ddff2ea5c7d2ca9f9100250dd
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
VSPERF makefiles were updated to automatically download and compile
VPP. VPP will not be installed into the OS, but it will be executed
from VSPERF's src subdirectory. Thus underlying OS is not affected
by VPP build required by VSPERF. It also allows quick switch among
different versions of various tools used by VSPERF.
As part of this patch, VERIFY and MERGE CI jobs were updated to
build VPP and test it with basic set of integration tests.
JIRA: VSPERF-493
Change-Id: I958b9031c4fefc87c4c63a471d2ba1a0db1eaaa4
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
Whitespaces were removed from RST indexes to correctly
pass rst validation.
Change-Id: I5f277d5f8846653c6e7ea3fbb29881e2dd3f610b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
For some testcases it is useful to have only one connection between
traffic generator and DUT. Thus IxNet class was extended to support
such connection. Feature is enabled if both IXIA ports are set to
the same value.
New integration testcase ixnet_pvp_tput_1nic was created to demonstrate
this feature.
Unused code was removed from 3rd_party/ixia/ixnetrfc2544.tcl to simplify
introduction of new features and to speed up IXIA configuration.
JIRA: VSPERF-503
Change-Id: I92ab24fa58eeb1ccb7f00ac7f3530ffca7b99241
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Adds final verification option to Xena traffic generator
inside VSPerf. Works by running the Xena2544.exe again
after the initial run is complete with modified values
inside the json file. If the final verify fails it will
revert the settings and continue the in a pattern based
on if the smart search is enabled.
JIRA: VSPERF-506
Change-Id: Ic272628c489b88989f67549bd020af7354dc9b91
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Change-Id: I9f83b22eebb61de7ab98040bd67f7dd7f3caf129
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Add jumbo frame support for all packet forwarding applications
inside guest for pxp testing. Enable jumbo frame support for
OvsVanilla, OvsDpdkVhostUser, and Packet forwarding.
Add minor fix for missing method issue when running packet
forwarding tests. The get_version method was missing in
the packet_forwaring core module.
JIRA: VSPERF-501
Change-Id: Ia99975f47c64259ed2566bde3c85b2779c309e80
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: I4455ce38ca81ad1d5a028c626e3ac53d6d87db43
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: Iad5c130936a815c41265b29053d2978808ff14bb
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
During testing it is sometimes useful to generate pure L2 traffic
without L3 or L4 related headers. IxNetwork TCL script was updated
to support this option.
Generic TRAFFIC array was enhanced by on/off switch for L3 and L4
headers. Thus it can be implemented by other traffic generators
in the future, if this feature will prove itself useful.
JIRA: VSPERF-500
Change-Id: I723c703e5d6ef609fd5b7db366871278a4730203
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Restriction of 64K streams was limited only to L4 stream
type. In case of L3 and L2 stream type, it is possible to
define unlimited number of streams to be simulated
by traffic generator.
JIRA: VSPERF-498
Change-Id: I4ce3253299473127d135c01543999a8593b9556f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: Ic278ba90c3174b9f83766861981aeb66320c8963
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I0ac84324be97de91c8d4730cd3cb73e994cf28a7
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: Id0510b96375033540fa80fe22b301fb1d0d20e40
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I2e9b432a74ee22690fdb366de619dc3a5d2ad725
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I8d948bad350ec90618edac5fc451167c06e8baa5
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This reverts commit 32a5263216d79ad34041dca55357278f092bb931.
Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I448fd909a89103b2c11cb16f91b8c646fb5adee8
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Support of VPP was implemented into VSPERF. Initial implementation
uses step driven testcases to configure P2P, PVP and PVVP network
scenarios. These testcases were prepared for three RFC2544 traffic
types, i.e. throughput, continuous stream and back to back.
VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS.
It is possible to use three types of l2 port connection supported
by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features.
Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE.
JIRA: VSPERF-495
Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I55d50656930f386b55924ee23948b2e321d2745b
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
doc structure
Remove reference to NEWS.rst in index file ... release notes will be referenced in Release section
Change-Id: I8f32c7cd23b0b2cd33703950a71cbb626c0c35fc
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch enables openSUSE Leap 42.2 systems to build and run VSPERF.
Change-Id: I182cec8a11ee5f0d70670f1ae18dd35fcc257616
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I122bdec1a7fa9a9e3da51acb31b30a231eff7890
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
All files were updated with license header. In case
of binary files is license stored in LICENSE file stored
in the same directory. Packages.txt was removed, because
file has not been used.List of packages differs according
OS distribution, all of neccesary packages are include in
instalation scripts
JIRA: VSPERF-489
Change-Id: I6ecae21b8db2a0f22fa5a66f9525352080f1fcc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.
JIRA: VSPERF-442
Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
VSPERF with DPDK 16.04 and 16.07 did not work on Fedora 20-22.
Installtion scripts for F20-F22 were deleted. VSPERF supports
F24 and F25.
JIRA: VSPERF-475
Change-Id: I3ce62b8883844cbcaab5b75fb9374068f9fced16
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Adds installer script for Fedora 25. Kernel version on Fedora 25
requires DPDK 16.11 and newer. VSPERF user must use DPDK and OVS
versions, which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: Icb86ea7655e95df57a8052e4a8523348a0c75dc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Adds installer script for Fedora 24. Kernel version on Fedora 24
requires DPDK 16.11 and newer. VSPERF user must ensure, that used DPDK
and OVS version which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: I08846d6e51faa578ea9305173174bfc49b77018a
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Documentation was updated as follows:
* description of vsperf downloading was added
* VNF section was updated
* additions to installation and virtualnev related parts
* file permissions of all documentaton files
was unified on 644
* README.md was updated with links to doc files
and online docs
* 3rd_party/readme was renamed and updated to follow
markdown syntax
JIRA: VSPERF-441
Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
|
|
|
|
New section specific to upgrade was added into documentation.
Description of configuration changes beetween Colorado and
Danube releases is discussed in detail.
JIRA: VSPERF-269
Change-Id: Ibbd1bb447e5d85c6b269ad26e10ff5d646a2bfbe
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|