Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Hyperlinks to the yardstick documentation were updated
to refer to files generated from the master branch.
JIRA: VSPERF-349
Change-Id: I248795b6a951377885492515fa9b96a694c9da5d
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Support for deployment scenarios with any number of VMs
in both serial and parallel configuration. Detailed
content of the patch:
* VswitchControllerPXP class for multi VM support
* pvvpxx and pvpvxx deployments for xx VMs in
serial respective parallel configuration
* special GUEST_ options expansion to requested
number of VMs;
* support of GUEST_ options specific macros
#VMINDEX, #MAC(), #IP() and #EVAL()
* all GUEST specific options are turned to lists
to be VM specific
* support for VM with 1 NIC
* support for VM with multiple NIC pairs; traffic
is routed in serial or parallel between NIC paris
based on deployment scenario
* support for PVVP and PVPV scenarios using VMs
with different numbers of NICs
JIRA: VSPERF-361
Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Documentation was updated to reflect recent changes
of vloop-vnf image.
JIRA: VSPERF-374
Change-Id: I65a34a7618593a7b77c38eb2fa4c87619b937346
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
|
|
The test case for verifying the vxlan tunneling feature without using any
ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and
generate tunnel traffic in the deployment. The packet flow in the test case is
as follows
TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT
ENCAP-PKT - Encapsulate the ingress packet to a tunnel type.
MOD-PKT - Modify the tunnel header to match the following decap interface.
DECAP-PKT - Decapsulate the newly generated tunneled packet.
Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54
Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
|
|
Enables multi-queue option for OVS versions 2.5.0 or less with
dpdk. Instead of enabling MQ on a port by port basis this sets
the global MQ option after starting the ovs switch.
JIRA: VSPERF-372
Change-Id: I245c76779695518d0005122d8214bbf3f141bb96
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Change-Id: I8a89ee3eedd3b439f0243eaef2fafc50ee807739
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
|
|
Fixes minor grammar and link issues.
JIRA: VSPERF-349
Change-Id: Id8708aee5b099287b5c99e79ca6da9ab8778897f
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix build issues and add the LTP to index.rst.
JIRA: DOCS-95
Change-Id: I2d22646af935c544645c01600b92a5f51ede39ec
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Updating MoonGen configuration guide
JIRA: VSPERF-370
Change-Id: I577491a6ece249a6162e1a3595a8682b826e5734
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Change-Id: Id0b2ce7460e76ffb3d478bd255a7e5b8e75ba001
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Adds options to Xena for testing options when running RFC 2544
throughput testing.
JIRA: VSPERF-369
Change-Id: I3145bd1a4d697d7b06cafda4f9d77cce859d1839
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
One of the new tests we agreed by working on Etherpad
was MatchAction. Maryam led the development, and many
provided comments there. This is another chance for
comments before we merge.
JIRA: VSPERF-242
Change-Id: I9da74efb703d5f221280567159e4ed6d830eb92c
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Change hugepage detection to check if hugepages are configured. Also
verifies enough free hugepages are available based on test
configuration. Will result in an exception if not enough hugepages
are found. This performs the check based on the guest memory configs
as well as the dpdk socket configs.
Adds some new methods to check for free hugepages based on all
hugepages or for socket free hugepages.
Adds new logging indicitaing needed and free hugepages as well as info
level event if hugepages are not configured at recommended 1GB size.
JIRA: VSPerf-255
Change-Id: I80d5605308861070c412568d8d40339f01b9718b
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Updated version of vloop-vnf image was added into the changelog inside
installation guide.
JIRA: VSPERF-349
Change-Id: I64a1acdf2191858dc282ea6c3b588048b3bdd742
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION
amount of RAM for hugepages.
JIRA: VSPERF-290
Change-Id: I092b3831254579eeebbe45e85884828f9d749895
Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Release notes were updated with features introduced by Colorado
release.
JIRA: VSPERF-349
Change-Id: I43179028c973cae4be6746e633c27fd3419e951a
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
This patch adds to Integration docs some simple testcase examples
like a HelloWorld. The purpose is to show how to use some basic
features: rules on L3/L4 fields, MultiStream, Multi-VM setup.
Patch Set 2: removed trailing whitespaces.
Patch Set 3: moved the examples to the middle of the file to avoid
potential conflicts with the VxLan TC patch from Sugesh.
Patch Set 4: fix typo.
Patch Set 5: added descriptions on each example.
Patch Set 6: reworked description for VM Replacement TC.
JIRA: VSPERF-331
Change-Id: I9dea23c26138db874fd67f41d8de8a628db5d91f
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Wrong whitespace characters breaks automatic generation of VSPERF
documentation. It is necessary to remove wrong characters before
merge of the draft into VSPERF doc, e.g. by filtering through
tr -d '\014'
JIRA: VSPERF-324
Change-Id: Ie280f5a443c89d4235cae5eb89fdceae74ea4213
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
JIRA: VSPERF-??
Change-Id: I1f07a70bf3c8604df890defd8493f107550bf8f3
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
|
|
Documentation update based on review comments received after
the merge of original patch.
JIRA: VSPERF-288
Change-Id: I86305fa064cc07e2e0797276a7b89b1d4b23d126
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Yardstick supports execution of vsperf specific testcases.
These testcases are specified by YAML files located
inside yardstick/tests directory. Documentation describing
yardstick usage and execution of vsperf testcases is
part of the userguide.
JIRA: VSPERF-288
Change-Id: I5a575d28d344e0f3e0a1c8434e2f3231fd312d31
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
|
|
Adds support for the MoonGen packet generator.
The following traffic types are included:
* RFC 2544 Throughput: Synchronous Interface
* RFC 2544 Back 2 Back: Synchronous Interface
* Continous Flow: Synchronous Interface
JIRA: VSPERF-168
Sample log of execution can be found as an
attachment within JIRA VSPERF-168
Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Adds support for multi-queue using the following config.
* VNF = QemuDpdkVhostUser
* VSWITCH = OvsDpdkVhost
* Guest Loopback as testpmd
Adds CPU mask, nbcore, rxq, and txq options for testpmd.
Adds option for guest nic multi-queue.
Adds option for dpdkvhostuser and dpdk multi-queue enable
JIRA: VSPERF-309
Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fix baseconfig to work with new Xena2544.exe versions. Reporting
option for latency/jitter collection has changed.
Added note to trafficgen document reflecting recommended version
to use for Xena2544.exe.
JIRA: VSPERF-311
Change-Id: I1974ea3c9f9e4c0935fc8adead6ddd5a92a16a04
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Make clear that 'max' refers to RFC2544 Throughput not line rate.
Change-Id: I968c1f99920b6ab0a3009622cb16c67daf5e3373
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Update integration document to reflect tests are not
just overlay tests.
* Include instructions for using macros
* Include information on test step validation
JIRA: VSPERF-298
Change-Id: Ic0d5f277b2a8b646f331e967f83421708b374f21
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Configuration options modified by VSPERF were split
between config_base and config_linuxapp files. Makefile
was modified to reflect this change.
Additional changes:
* content of qemu shared dir is copied without preservation
of attributes to avoid compilation issues due misaligned
clocks => could produce broken igb_uio module
* added support of new testpmd "Bye.." message
* DPDK sources are copied from RTE_SDK_USER directory for all
VNF variants - this has been wrongly reverted by inttest patch
Change-Id: Id502a072c1f843258496decbf031e7ba7264d459
JIRA: VSPERF-297
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Michal Weglicki <michalx.weglicki@intel.com>
|
|
|
|
Add instructions for gotcha when activating the python 3 env.
Change-Id: Ia531ca796ad15354974dee13033a8d97a42c7747
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
|
|
Updated the added features list in NEWS.rst. If there's anything I
missed please let me know.
Change-Id: I12dd63cbea293642f14e1ab3eb0d5b715e3a015e
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Upgrade OVS version tested to 2.5. Tested with OVS with DPDK and stock
OVS.
JIRA: VSPERF-254
Change-Id: I78f6cdca0b96c5b13524cec3a662e55f49320f69
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|