Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch implements the following new CLI parameters that
can be used in the --test-params list.
1. guest_nic_queues, which overrides all GUEST_NIC_QUEUES values
2. guest_testpmd_txq, which overrides all GUEST_TESTPMD_TXQ
3. guest_testpmd_rxq, which overrides all GUEST_TESTPMD_RXQ
4. guest_testpmd_nb_cores, which overrides all GUEST_TESTPMD_NB_CORES
values
5. guest_testpmd_cpu_mask, which overrides all GUEST_TESTPMD_CPU_MASK
values
6. vswitch_dpdk_multi_queues, which overrides VSWITCH_DPDK_MULTI_QUEUES
7. guest_smp, which overrides all GUEST_SMP values
8. guest_core_binding, which overrides all GUEST_CORE_BINDING values
When they are present in the CLI the corresponding settings from the
configuration files will be overridden.
As an example a usage can be:
./vsperf --test-params "guest_nic_queues=2;guest_testpmd_txq=1;\
guest_testpmd_rxq=1;guest_testpmd_nb_cores=1"...
v2: rebase + rework to add other CLI params as suggested and update doc.
v3: changes in 'testusage.rst' doc.
JIRA: VSPERF-371
Change-Id: I140d6e068c1653d21aaa0df27532a48c4a12c151
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Currently VSPERF supports OVS, DPDK and QEMU built
from the source code only. In some cases it is required
to support installation of these tools from binary packages
available for given linux distribution. Thus VSPERF
configuration and code was modified to suport both source
and binary versions of tools. This can be configured perf
tool, so various combinations of source and binary version
are supported.
Together with new configuration also a handling of kernel
modules was modified to automatically detect and load module
dependencies.
JIRA: VSPERF-340
JIRA: VSPERF-339
Change-Id: I855cb438cbd8998bdc499613ea5e7de2526299d7
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Otto Sabart <osabart@redhat.com>
|
|
Support for deployment scenarios with any number of VMs
in both serial and parallel configuration. Detailed
content of the patch:
* VswitchControllerPXP class for multi VM support
* pvvpxx and pvpvxx deployments for xx VMs in
serial respective parallel configuration
* special GUEST_ options expansion to requested
number of VMs;
* support of GUEST_ options specific macros
#VMINDEX, #MAC(), #IP() and #EVAL()
* all GUEST specific options are turned to lists
to be VM specific
* support for VM with 1 NIC
* support for VM with multiple NIC pairs; traffic
is routed in serial or parallel between NIC paris
based on deployment scenario
* support for PVVP and PVPV scenarios using VMs
with different numbers of NICs
JIRA: VSPERF-361
Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Adds multi-queue for vanilla OVS using virtio-net.
TunTap ports will use multi_queue parameter when ports are
created/deleted if guest nic queues are enabled and
vswitch is ovs vanilla. Virtio net will now add guest nic
queues to qemu command line if appropriate.
Reworked multi-queue documentation to reflect these changes.
Adds vhost net thread affinitization which is recommended
when performing vanilla ovs multi-queue.
Guests will require ethtool if using l2fwd or linux bridge
as the loopback application when vanilla ovs multi-queue
is enabled.
Modified dpdk setting in vswitch conf to be better worded
for separation from vanilla ovs multi-queue.
Updated release and installation doc for new vloop image
that includes required ethtool utility.
JIRA: VSPERF-373
Change-Id: Idb550515190b1a93390308c11f54da368f962512
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Support of vHost Cuse interface is not supported
by OVS anymore, so it was removed also from VSPERF.
Cuse can be used with older VSPERF release if needed.
JIRA: VSPERF-376
Change-Id: Id786bddf5fa9dce5706a93de7b089707a60317cd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
|
|
Enables multi-queue option for OVS versions 2.5.0 or less with
dpdk. Instead of enabling MQ on a port by port basis this sets
the global MQ option after starting the ovs switch.
JIRA: VSPERF-372
Change-Id: I245c76779695518d0005122d8214bbf3f141bb96
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Fixes minor grammar and link issues.
JIRA: VSPERF-349
Change-Id: Id8708aee5b099287b5c99e79ca6da9ab8778897f
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Adds support for multi-queue using the following config.
* VNF = QemuDpdkVhostUser
* VSWITCH = OvsDpdkVhost
* Guest Loopback as testpmd
Adds CPU mask, nbcore, rxq, and txq options for testpmd.
Adds option for guest nic multi-queue.
Adds option for dpdkvhostuser and dpdk multi-queue enable
JIRA: VSPERF-309
Change-Id: I5296fc18b430eace598d8c51620fc27a6c46a65e
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Configuration of DPDK options in ovs-vswitchd has changed.
Previously used option --dpdk was deprecated and all DPDK
related options have to be configured through ovsdb via ovs-vsctl
calls. VSPERF was modified to detect and use correct version
of DPDK configuration. New configuration options should
be put into VSWITCHD_DPDK_CONFIG dictionary.
VSPERF classes specific to OVS were refactored.
Change-Id: Ia3fad5906221439f477638f1f9734289dbf737bb
JIRA: VSPERF-291
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Generic support of SRIOV has been added. Virtual interfaces can be
used in multiplei scenarios instead of physical NICs. Virtual
functions can be directly accessed from VM by PCI passthrough method.
Another option is to use VFs with vSwtich to evaluate impact
on performance.
Additonal modifications:
* Automatic detection of NIC details has been added to simplify
configuration.
* Obsoleted configuration options have been removed.
* Logging usage within vsperf script was fixed.
* Vsperf main was refactored and final cleanup function added.
* Configurable forwarding mode of TestPMD executed inside VM.
JIRA: VSPERF-198
Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Repair of documentation and configuration files where test-params
is incorrectly listed as test-param.
JIRA: VSPERF-266
Change-Id: I6be6c387fd57338f5dc5fba2ca8e1438dada0852
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests
Recent changes:
* Line wrap
* Fix GENEVE IP settings
* Add GRE and GENEVE steps to integration.rst
* Add DUT_NIC1_MAC and DUT_NIC2_MAC
* Remove unnecessary call to vswitch.set_tunnel_arp
* Move optional VXLAN/GRE/GENEVE decap settings to a different section
* Add tunnel type to report files md and rst
* Fix typo error: l4 to L4 in conf/integration/03_traffic.conf
Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Enable vfio_pci support for DPDK in the case where the end user
doesn't want to use igb_uio.
Changes:
* Use generic functions to strip the path and .ko extension from the
module to be inserted/removed.
* Removed debug line in Modules_Manager.
* Removed commented code.
* Fixed all pylint issues.
JIRA: VSPERF-249
Change-Id: I69c9077735879bcbf7ce5c970c1ec53c219e9f90
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Is required or it leaves the context of the document segment in the userguide.
Change-Id: Idb476b7926ba0fce11ed3be54eaa6837e34bff66
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
|
|
Add a mode to pause the traffic generator before transmission to bypass
manual setup if required.
Change-Id: Iad62a5e7cb83a311e2814d8a9ee2bc9b2d2ed4de
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
JIRA: VSPERF-222
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Updated the heading and moved to a new filename for composite docs.
Added a link to the vsp userguide at the end of the doc.
Change-Id: I416228be9347275bcd4c90e394678e4eb93198d4
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
|