summaryrefslogtreecommitdiffstats
path: root/core
AgeCommit message (Collapse)AuthorFilesLines
2019-01-21pkt_gen: STC - Imix Genome SupportSridhar K. N. Rao1-1/+8
This patch adds Imix-Genome support to STC. 1. Imix, of type genome, is included in traffic configuration. 2. The genome is converted to appropriated weights and pkt-sizes. 3. Throughput test is run with imix-configuration. 4. genome configuration is added to results. 5. Added Reporting of Average-Frame-Size - if IMIX is configured. 6. Updated genome comments 7. Clarified the reference to RFC 6985. JIRA: VSPERF-521 Change-Id: I813efb66338ee1d1320a01ce5e0834180461120c Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2018-05-28connections: Introduction of generic APIMartin Klozik8-356/+144
Redesign of vSwitch and vSwitch controller classes, to use generic connection methods for configuration of vSwitch. This API is more generic and vSwitch agnostic, thus deployment scenarios like P2P, PVP, PVVP (i.e. PVVPx) can be used for all (currently) supported vSwitches. Usage of new API will simplify an introduction of new vSwitches in the future. This patchset introduces following changes: * OVS: implementation of add_, del_, dump_ connection(s) and their validation methods * VPP: bidir parameter removed - it is up to the deployment scenario implementation to take care about bidirectional connections * P2P and PXP controllers were updated to use connection methods instead of flow related methods. Thus standard TCs will support both OVS and VPP. NOTE, PVPV is not supported for VPP (yet?). * refactoring of vSwitch interfaces and inherited classes * VPP step driven TCs were replaced by standard TCs with appropriate deployment scenarios. This is for backward compatibility with TC reporting. Once reporting of VPP TC results into results DB will be modified, this TCs can be removed. * OVS routing tables support was generalized to support P2P and PXP deployments and step driven TCs. Usage of OVS routing tables is now configurable (turned off by default) for better comparison of results among various vSwitches. * Multistream pre_installed_flows feature was generalized to support P2P and PXP deployments and step driven TCs. * IxNet: TRAFFIC['l4']['dstport'] will be used as a start value for port iteration if L4 multistream feature is enabled. * OVS: default flow template is now configurable via OVS_FLOW_TEMPLATE * OVS: support of TRAFFIC['flow_type']='ip' was generalized to work with connection methods (i.e. with P2P and PXP deployments and step driven TCs) * integration TCs: modification of integration TCs and their macros to utilize new generic connection based API * CI: list of TCs for VERIFY & MERGE jobs was changed to run the same generic tests for both OVS & VPP * documentation update * small fixes and improvements JIRA: VSPERF-579 Change-Id: If4e6e6037929eab9f16c2bbcb8a0fb30e5d6f9b0 Signed-off-by: Martin Klozik <martin.klozik@tieto.com> Reviewed-by: Richard Elias <richard.elias@tieto.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-04-11Merge "trex: Add support for burst traffic type"Martin Klozik1-0/+3
2018-03-23python: Pylint 1.8.2 code conformityRichard Elias12-38/+37
Updated master Python scripts to conform to the newer pylint 1.8.2 standard. JIRA: VSPERF-563 Change-Id: I19305a008a2e22c2f4841aa83fed85fbdc2d549c Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-03-22trex: Add support for burst traffic typeMartin Klozik1-0/+3
Support for burst traffic type was added into T-Rex. This traffic type is useful for tests, where a limited number of frames should be sent through DUT. JIRA: VSPERF-562 Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-01-12trex: Add support for traffic captureMartin Klozik1-0/+4
A support of traffic capture was added into T-Rex. It allows to write a functional tests, which will verify proper vSwitch functionality by inspection of packets received by T-Rex. A testcase example was added into integration testcases. JIRA: VSPERF-556 Change-Id: I5ad28479ca2ec29760b68f24510af1a6d74866ae Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2017-12-19trafficgen: Postponed call of connect()Martin Klozik1-1/+6
In order to support execution of SW traffic generator inside VM, we have to postpone the call of connect() method from traffic controller. Currently it is called during initialization phase, when VMs are not active and thus connect() would always fail. This patch moves the call of connect() inside configure() method, which is called later when VMs are up and running. This modification allows to configure VM to VM scenario, where 1st VM is running a loopback application and 2nd one executes one of supported SW traffic generators, i.e. T-Rex or MoonGen. Change-Id: Ifeb659aadaa2e1cd5975564965e1719c1e72a12e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-15Merge "teststeps: Improvements and bugfixing of teststeps"Martin Klozik3-29/+46
2017-11-03load_gen: Supporting loading of load_gen via loader.Sridhar K. N. Rao2-16/+38
Currently all tools are loaded via loader utility, except load_gen. Load_gens were loaded directly through component_factory. This patch adds support to load load_gens through loader utility. The changes are as follows: 1. Configuration changes:The common.conf include configuration of directory. testcases.conf includes changes to load configuration, where tool is no more part of the load-configuration. The custom.conf has configuration of LOADGEN to be used - this configuration replaces the earlier 'tool' configuration parameter. 2. loader_utility_changes: In loader.py, loadgen_loader is defined, which is used in new get_loadgen function. 3. component_factory changes: in create_loadgen, similar to other tools, the function just retuns the object of loadgen_class. 4. Renaming of Dummy load_gen: Loader fails to load properly a dummy loadgen due to name-clash with dummy in pkt_gen. To avoid this name clash dummy is renamed to dummyloadgen. 5. testcase changes: create_loadgen is now called with output of loader's get_loadgen_class. 6. Fixed Pylint Errors and extra-space at the end. 7. Included CLI options support for --loadgen and --list-loadgens. Thanks to Martin K. 8. Added the missing loadgen parameter in testcases.conf. 9. Fixed the missing comma error. 10. Added CI change in build-vsperf.sh 11. Fixed configuration reading in stress/stress.py JIRA: VSPERF-533 Change-Id: I3fbb259618825a12fef55320a748a4f02509190b Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-11-03teststeps: Improvements and bugfixing of teststepsMartin Klozik3-29/+46
This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-23opnfvresultdb: Update data reported to result DBMartin Klozik1-0/+2
Data reported to result DB were updated to comply with recent API version and requirements. JIRA: VSPERF-488 Change-Id: I6ab02ea54d99099e88b0d5ab6e9745ee8297f544 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com> Signed-off-by: Morgan Richomme <morgan.richomme@orange.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-06-02tests: Improvement of step driven testcasesMartin Klozik4-39/+57
A set of improvements was introduced to enhance step driven testcases capabilities. Details: * delay among test steps is configurable by TEST_STEP_DELAY parameter * step driven tool function exec was renamed to exec_shell * new step driven tool function exec_python was introduced to execute a python code * new step driven object sleep was introduced to pause test execution for defined number of seconds. * fixed bug in settings.validate_getValue() to correctly validate access of parameters modified by TEST_PARAMS * new #PARAM() macro was introduced to allow references among configuration parameters * multistream support has been added into ixnetrfc2544v2.tcl, which is used for tunneling protocols test (op2p deployment) * fixed bug in op2p deployment to list interfaces and flows from both bridges involved in the test * test report updated to state exact rfcxxxx type of traffic type, e.g. rfc2544_continuous * test report of step driven testcases was updated to contain measured values from traffic generator in CSV report * method for ovs flow comparison was modified to normalize IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8) JIRA: VSPERF-512 Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
2017-03-30jumbo_frame: Add jumbo frame supportChristian Trautman1-0/+5
Add jumbo frame support for all packet forwarding applications inside guest for pxp testing. Enable jumbo frame support for OvsVanilla, OvsDpdkVhostUser, and Packet forwarding. Add minor fix for missing method issue when running packet forwarding tests. The get_version method was missing in the packet_forwaring core module. JIRA: VSPERF-501 Change-Id: Ia99975f47c64259ed2566bde3c85b2779c309e80 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-03-27Merge "vpp: Reporting update related to VPP"Martin Klozik1-0/+1
2017-03-24multistream: Support huge number of streamsMartin Klozik1-4/+4
Restriction of 64K streams was limited only to L4 stream type. In case of L3 and L2 stream type, it is possible to define unlimited number of streams to be simulated by traffic generator. JIRA: VSPERF-498 Change-Id: I4ce3253299473127d135c01543999a8593b9556f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-20vpp: Reporting update related to VPPMartin Klozik1-0/+1
VSPERF reports were updated to contain vSwitch name. In case of VPP, it is not possible to read its version if VPP is not running. Thus VSPERF was enhanced to support tool version check during its runtime. This mechanism can be enhanced to support e.g. VNF in the future. JIRA: VSPERF-496 Change-Id: I74b47505e35340eead165d9b588e9cc15c058bbf Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-15vpp: Initial support of VPP vSwitchMartin Klozik1-1/+2
Support of VPP was implemented into VSPERF. Initial implementation uses step driven testcases to configure P2P, PVP and PVVP network scenarios. These testcases were prepared for three RFC2544 traffic types, i.e. throughput, continuous stream and back to back. VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS. It is possible to use three types of l2 port connection supported by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features. Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE. JIRA: VSPERF-495 Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-02-13pylint: Fixing pylint errors and warningsgoldammx4-10/+12
All python files must reach pylint score 10/10. This will be regularly verified by Jenkins jobs to keep constant code quality. VSPERF specific pylintrc file was updated according to the vsperf coding standards. Distro version included in reports will be slightly different, due to migration to new python package distro. Previously used platform.distro() will be deprecated since python 3.7. JIRA: VSPERF-487 Change-Id: I934120208b9624787a3567ccaa49e14d77d7a5bf Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-27pkt_gen: STC - RFC 2889 Address Learning and Caching SupportSridhar K. N. Rao2-10/+10
This patch adds RFC-2889 address-learning-rate test and address-caching-capacity tests. The patch includes following changes 1. 01_testcases.conf: testcase definitions are added for new tests 2. results_constants.py: 3 new results constants are added, removed unsupported constants 3. testcenter-rfc2889-rest.py: Added support to these two new tests. Removed un-necessary synchronization of db-file. 5 new configuration parameters are added - which are explained in (4). 4. trafficgen.rst: Configuration description for rfc2889 tests are added. Stale information is removed. 5. testcenter.py: Support for two new tests are added. Separate functions for results analysis and parameter settings are added. 6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py, based on the traffic_type, are added. Removed trailing whitespaces from trafficgen.rst JIRA: VSPERF-395 Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2017-01-18testpmd_pvp_fix: Fix SR-IOV QemuPciPassthrough mode to not use vdevChristian Trautman1-3/+5
A recent patch introduced a bug where SR-IOV would use code designed for use with testpmd_pvp scenarios. This is because this scenario also calls for the vswitch=none flag. This patch resolves this issue to stop the vdev devices from being added when the vnf is specified as QemuPciPassthrough. JIRA: VSPERF-460 Change-Id: Ie4522b046982ec5554c3deb6a507d86ca9798124 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-13testpmd_pvp: Adds pkt_fwd to allow pvp topology testingChristian Trautman1-1/+16
Requires DPDK 16.11 or greater to support vdev flags. Initial support for TestPMD to support guests. Allows vsperf to execute TestPMD as a switch for pvp test scenarios. Can be increased in functionality later to support multiple guest configs. JIRA: VSPERF-406 Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-04bugfix: Ethernet type and vnf stop fixesMartin Klozik2-4/+4
Usage of ethernet type for IPv4 was harmonized, to use 0x0800 at all places. Together with this fix a bug during VNF cleanup was removed - VNF started by TestSteps are tested for validity before the call of their stop() method. It avoid vsperf crash in case, that VNF was not properly started. JIRA: VSPERF-436 Change-Id: Ic1a36919f5c9d707aa0aad64b5d96a1214c56cb3 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2016-12-07conf:Traffic-type naming convention and consistencySridhar K. N. Rao1-3/+6
Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik3-20/+9
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-10-27teststeps: Generic support of step driven testsMartin Klozik6-196/+181
In the past, step driven testcases were supported only by integration testcases. This patch adds generic support of TestSteps for both integration and performance testcases. Step driven test were improved to support modification of existing deployment. As part of the patch a refactoring of traffic controllers were performed. Traffic controllers were modified to support trafficgen-off and trafficgen-pause modes in all possible ways of trafficgen invocation. JIRA: VSPERF-362 Change-Id: Ic8b7a9b0e7165f0a15a52279ed0f0952da9fedb8 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-09-21pkt_gen: Spirent Testcenter RFC 2889 SupportSridhar K. N. Rao3-1/+156
The changes/additions, apart from spirent testcenter-specific, also includes to some files in conf (01_testcase and 03_traffic) and core (result- constants, traffic_controller and component_factory) folders. Currently, only RFC2889 Forwarding testcase is supported. Incorporated following review suggestions: 1. Log level fixes 2. Removing unused function in results_constants.py 3. Added documentation to docs/configguide/trafficgen.rst. Userguide will be updated once other RFC2889 tests are implemented. 4. string matching in component_factory. 5. Remove Trailing Whitespaces JIRA: VSPERF-286 Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-09-05multi VM: Fix p2p deploymentMartin Klozik1-2/+3
Revert enforced vsperf failure in case, that VnfController is used in scenario without VNFs. Instance of VnfController is created for all scenarios including p2p, so it must be prepared for it. JIRA: VSPERF-361 Change-Id: Icf6e88e7ea62044c09bb194c260ea878d6a197c9 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-09-01multi VM: Multi VMs in serial or parallelMartin Klozik5-268/+277
Support for deployment scenarios with any number of VMs in both serial and parallel configuration. Detailed content of the patch: * VswitchControllerPXP class for multi VM support * pvvpxx and pvpvxx deployments for xx VMs in serial respective parallel configuration * special GUEST_ options expansion to requested number of VMs; * support of GUEST_ options specific macros #VMINDEX, #MAC(), #IP() and #EVAL() * all GUEST specific options are turned to lists to be VM specific * support for VM with 1 NIC * support for VM with multiple NIC pairs; traffic is routed in serial or parallel between NIC paris based on deployment scenario * support for PVVP and PVPV scenarios using VMs with different numbers of NICs JIRA: VSPERF-361 Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-08-16integration: Support for VxLAN TC without using overlay traffic gen.Sugesh Chandran2-0/+241
The test case for verifying the vxlan tunneling feature without using any ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and generate tunnel traffic in the deployment. The packet flow in the test case is as follows TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT ENCAP-PKT - Encapsulate the ingress packet to a tunnel type. MOD-PKT - Modify the tunnel header to match the following decap interface. DECAP-PKT - Decapsulate the newly generated tunneled packet. Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54 Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
2016-08-04bugfix: Harmonize test/trial RFC2544 terminologyMartin Klozik1-5/+5
VSPERF framework was updated to follow RFC2544 definition of 'test' and 'trial' terms. Test parameter 'rfc2544_trials' was replaced by new parameter 'rfc2544_tests'. Both code and documentation were updated to reflect these changes. JIRA: VSPERF-300 Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com>
2016-06-30pkt_gen: Adding MoonGen traffic generatorbmichalo1-2/+3
Adds support for the MoonGen packet generator. The following traffic types are included: * RFC 2544 Throughput: Synchronous Interface * RFC 2544 Back 2 Back: Synchronous Interface * Continous Flow: Synchronous Interface JIRA: VSPERF-168 Sample log of execution can be found as an attachment within JIRA VSPERF-168 Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-05-23bugfix: Remove dependency on ifconfigMartin Klozik1-6/+12
VSPERF uses ifconfig at several places to bring up a networking interface. However ifconfig has been deprecated by iproute2 package and it is not available in standard installation of many Linux distributions. Thus all calls of ifconfig have been replaced by call of 'ip' tool. Change-Id: I935eaf85b6082e4641d12cffea3e0882c634e5ea JIRA: VSPERF-299 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-05-11testcase: execution timeMaryam Tahhan1-0/+2
Measure the execution time for a testcase and add it to the log. We need to report the test execution times for the testcases for OPNFV release C. Modified the timing result in the csv + results file to display a H:M:S format. Change-Id: Ife9e361da5f8b3fc3721050ae3e6dce049f7402d Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-05-04Merge "bidirectional value: Fix inconsistency for bidir param"Maryam Tahhan2-2/+2
2016-05-04bidirectional value: Fix inconsistency for bidir paramChristian Trautman2-2/+2
Fixes bi-directional param and enforces string type in testcase configuration. Modifies all instance where bi directional value is used to string. * Changes documentation to specify value type as needed * Changes traffic defaults to use string for bidir value * Fixes testcases configuration files to use bidir as str * Change testcase conf documentation to note enforcement of string type * Sets bidir to title format to keep consitency in traffic profile when passed to traffic generators * Fix pvp/pvvp check for bidir value * Raise exception if testcase configuration is not set as str for bidir value * Change Xena bi-dir check to string compare instead of typecasting to boolean to compare. JIRA: VSPERF-282 Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-05-04bugfix: Graceful shutdown of VM - improvementMartin Klozik1-2/+7
Cleanup phase of PVVP scenario sometimes causes server reboot. Following updates were made to prevent reboots: * better generic process termination procedure * ovsdb is terminated after vswitchd termination * vswitchd is terminated directly instead of parent sudo process * already running VNFs are terminated in case of failure during VNF start() Change-Id: Ic09d60d7bfdea01c84a2685ede3d0316f0d09be7 JIRA: VSPERF-271 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-04-14sriov: Support of SRIOV and Qemu PCI passthroughMartin Klozik3-7/+11
Generic support of SRIOV has been added. Virtual interfaces can be used in multiplei scenarios instead of physical NICs. Virtual functions can be directly accessed from VM by PCI passthrough method. Another option is to use VFs with vSwtich to evaluate impact on performance. Additonal modifications: * Automatic detection of NIC details has been added to simplify configuration. * Obsoleted configuration options have been removed. * Logging usage within vsperf script was fixed. * Vsperf main was refactored and final cleanup function added. * Configurable forwarding mode of TestPMD executed inside VM. JIRA: VSPERF-198 Change-Id: I4a0d5d262b245d433b12419de79399fb5825a623 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-21integration: Support of integration testcasesMartin Klozik4-2/+97
Generic support for integration testcases with first set of tests for vswitch testing. New test option "TestSteps" has been introduced to define test step by step directly in configuration file. In case that this concept will be accepted, there are plenty of possibilities for future improvements. For example: * use it also for performance tests without explicit call of validation methods * introduce step macros for repetitive scenarios, so new tests can be easily written * further generalization, which would go beyond usage of controllers and will operate directly with vswitch, vnf and trafficgen objects Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2 JIRA: VSPERF-212 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-03-16tunneling: Vanilla OVS decapsulation testsDino Simeon Madarang2-5/+75
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests Recent changes: * Line wrap * Fix GENEVE IP settings * Add GRE and GENEVE steps to integration.rst * Add DUT_NIC1_MAC and DUT_NIC2_MAC * Remove unnecessary call to vswitch.set_tunnel_arp * Move optional VXLAN/GRE/GENEVE decap settings to a different section * Add tunnel type to report files md and rst * Fix typo error: l4 to L4 in conf/integration/03_traffic.conf Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-23bugfix: Parameter duration does not workMartin Klozik1-7/+3
Vswitchperf help describes two different options, which will set lenght of the test or duration of its iteration. It can be set either by parameter --duration or by --test-params CLI option duration. However only the second option is implemented. It is enough to support only one option and thus --duration parameter has been removed. Change-Id: Icfa40ec25f50bd090229b0761fa968567d8d3553 JIRA: VSPERF-196 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-02-17VSPERF: Report percentage frameloss from IXIA/IXNETRadek Zetik1-1/+3
The patch introduces frame_loss_percent result value. The implementation is done for Ixia and IxNet traffic generators. The value is visible in list of result values at the end of the test, in csv, rst and md files. JIRA: VSPERF-201 Change-Id: I9b6795d427b199cb62ed66b7a137e412e36dc757 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
2016-02-03pkt_gen: Add IxNet support for GRE framesDino Simeon Madarang1-6/+10
Add option to generate GRE frames for testing GRE decapsulation tests. Recent changes: * Fix merge conflict * Updated userguides * Complete set of fields and working decap * Move GRE ixnet calls to if statement to reuse inner frame settings Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528 JIRA: VSPERF-191 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang3-5/+78
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang3-4/+149
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik1-3/+7
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21Add testpmd as vswitch classRobert Wojciechowicz3-2/+116
The purpose of using testpmd instead of OVS is to get the baseline of the DUT when performing hardware offloading operations. There are supported different checksum calculation and txq flags settings. Change-Id: I93c9b45dcb31eaa1f610b7e061f3dd5936b0e6ec JIRA: VSPERF-193 Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik1-2/+47
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-16Back2Back: update default paramsMaryam Tahhan1-0/+2
Update the default duration of a back to back test to be 2 seconds which is the minimum recommended by RFC2544, and update the Trials to be 50, which is also the default value specified by the RFC. This patch also fixes the tcl script to allow for the minimum framesize to be sent from the traffic gen. JIRA: Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
2015-12-09testcase: scalability testcase enhancementsMartin Klozik1-0/+4
Streams used by scalability testcases can be simulated at different network layers by modification of destination MAC address (L2), destination IP address (L3) or destination UDP port (L4). It is possible to define number and type of the streams by testcase definition by options "MultiStream" and "Stream Type" or by CLI parameters "multistream" and "stream_type". CLI options override testcase definition. Number of streams, their types, used transport protocol and indication of pre-installed flows are written to both result CSV file and MD file with test report. Default transport protocol was changed to UDP because IxNetwork configuration script doesn't support TCP yet. Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1 JIRA: VSPERF-81 JIRA: VSPERF-82 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-08pkt_gen: rename throughput_tx_* to tx_rate_*Maryam Tahhan1-6/+6
Change throughput_tx_* references to tx_rate_* so the results won't be confusing as part of the opnfv test dashboard when they become publicly available. Change-Id: Ie8cfae99a75497f15eb09d097c72c8a35df3b5f9 JIRA: VSPERF-135 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Ian Stokes <ian.stokes@intel.com> Reviewed-by: Al Morton <acmorton@att.com>