aboutsummaryrefslogtreecommitdiffstats
path: root/conf
AgeCommit message (Collapse)AuthorFilesLines
2016-02-03Add OVS tunnel encapsulation performance testDino Simeon Madarang3-0/+93
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance. This patch creates a new deployment scenario, Overlay_P2P. The DUT is configured as a TEP (Tunnel Endpoint) which performs encapsulation of frames and sends traffic to the 2nd traffic generator port. The traffic generator in this case receives an encapsulated frame. No decapsulation is performed in this testcase. Introduce a vsperf param, --run-integration, to filter tests to integration tests. When running integration tests, variables defined in the directory conf/integration/*conf as well as the conf/*.conf are available. This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer. Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53 JIRA: VSPERF-180 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-25results: update test dashboard urlMaryam Tahhan1-1/+1
Update test dashboard url to http://testresults.opnfv.org/testapi. JIRA: VSPERF-112 Change-Id: I2402aaff846229c78fa1f4d3d9e409d931886b4f Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Morgan Richomme <morgan.richomme@orange.com
2016-01-25bugfix: set default framerate/iload to 100%Martin Klozik1-3/+4
Continuous testcases should be executed with 100% of frame rate by default. Thus iLoad parameter of all continuous testcases was updated to the value of 100. Change-Id: Ia1c5a49c274d96a25ab7d9b8378ae7be6dc0b10c JIRA: VSPERF-189 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik1-1/+5
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21Add testpmd as vswitch classRobert Wojciechowicz1-0/+36
The purpose of using testpmd instead of OVS is to get the baseline of the DUT when performing hardware offloading operations. There are supported different checksum calculation and txq flags settings. Change-Id: I93c9b45dcb31eaa1f610b7e061f3dd5936b0e6ec JIRA: VSPERF-193 Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik1-0/+12
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-05conf: modify core mask formatCiara Loftus1-2/+3
The pmd-cpu-core mask flag does not accept a hexmask with a leading '0x'. Remove these characters from the VSWITCH_PMD_CPU_MASK variable. JIRA: VSPERF-139 Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-04bugfix: Vanilla OVS kernel module broken dependenciesMartin Klozik1-1/+1
Vsperf doesn't install OVS kernel module into standard directory, to keep host OS untouched. Thus kernel module must be inserted by insmod and module dependencies solved manually. List of kernel modules was updated to load all dependencies for recent OVS version. Change-Id: Id147615ca95cfbde26d1dc8d6c9801f7bb3b5d36 JIRA: VSPERF-161 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-23vnf: support of vloop_vnf VMMartin Klozik1-8/+8
Additional modifications are required to support vloop_vnf as a master VM image for PVP and PVVP deployments. Firewall is disabled directly by call of iptables to avoid dependency on distribution specific firewall handling. Default configuration values in 04_vnf.conf were set according to vloop_vnf to make its usage easy. Values are generic enough to work well also with other images. Parameters VANILLA_NICx_NAME and vanilla_nicx_name were renamed to GUEST_NICx_NAME and guest_nicx_name respectively, because they are used for all vswitch versions. Functionality of CLI options was fixed. Default values of GUEST_NICx_NAME were changed to work with vloop_vnf image. Bug with modification of TRAFFIC_DEFAULTS values has been fixed. Deep copy is used and l2 and l3 dictionaries are correctly updated to avoid issues. Qemu disc emulation has been set to SCSI again to avoid error messages related to non-functional DMA in syslog. Appropriate kernel modules were added into vloop_vnf to support scsi disk emulation during boot. Change-Id: I5901f454861f99d21cca03030d6d5468ab71a8af JIRA: VSPERF-133 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-14Results: Integrate with opnfv_test_dashboardRadek Zetik1-0/+2
The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name: example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" Additionally, there are two parameters with default values: OPNFV_URL = "http://213.77.62.197" Defines address of opnfv releng database server PACKAGE_LIST = "src/package-list.mk" OVS and DPDK tags are read from this file and values are used for creation of 'version' filed. The patch requires 'requests' module. The requirements.txt is updated. JIRA: VSPERF-112 Change-Id: I49f6f5058b1bce8a257669efa8229ff31879481d Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-14bugfix: Fix failure caused by unset localeMartin Klozik1-5/+14
In case, that VSPERF detects missing locale settings, it will set language and encodding settings to default values specified by configuration parameter DEFAULT_LOCALE. Localized external commands with output parsed by VSPERF are executed with modified locale to ensure correct VSPERF function. Locale settings for such commands is specified by configuration parameter DEFAULT_CMD_LOCALE. Change-Id: If5c15115b778ce90046e390f10438b780f82695b JIRA: VSPERF-132 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-09testcase: scalability testcase enhancementsMartin Klozik1-0/+12
Streams used by scalability testcases can be simulated at different network layers by modification of destination MAC address (L2), destination IP address (L3) or destination UDP port (L4). It is possible to define number and type of the streams by testcase definition by options "MultiStream" and "Stream Type" or by CLI parameters "multistream" and "stream_type". CLI options override testcase definition. Number of streams, their types, used transport protocol and indication of pre-installed flows are written to both result CSV file and MD file with test report. Default transport protocol was changed to UDP because IxNetwork configuration script doesn't support TCP yet. Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1 JIRA: VSPERF-81 JIRA: VSPERF-82 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-08Results: Integrate with opnfv_test_dashboardRadek Zetik1-0/+2
All the test projects generate results in different format. The goal of a testing dashboard is to provide a consistent view of the different tests from the different projects. We need to enable the data collection for VSPERF, in other words VSPERF pushes data using a REST API. The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name. Example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" JIRA: VSPERF-112 Change-Id: I37255414eebcc2ff0c12109c508dcd984663a830 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-02vnfs: configurable loopback application support inside VMMartin Klozik2-4/+19
For PVP and PVVP deployments, traffic inside virtual machines must be forwarded between its interfaces. There are several forwarding options supported by VSPERF, including DPDK testpmd, Huawei l2fwd kernel module and linux bridge. Another option is, that VM image has built in forwarding functionality and vsperf doesn't configure it itself. User can select VM loopback application by configuration option GUEST_LOOPBACK (per VM) or by SCALAR cli option guest_loopback (global settings). Selected guest loopback application(s) will be written into test results CSV file and test report MD file. Default wildcarded guest login prompt was added. Guest startup guarding timer can be configured. Path to OVS kernel module has been fixed. Change-Id: If738da1ea09112f9cf2267afcbc99a6797f3a03a JIRA: VSPERF-130 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-11-11pkt_gen: update testcenter implementationMaryam Tahhan2-55/+112
Update testcenter implementation to move settings to generic settings file and change windows line endings. JIRA: VSPERF-126 Change-Id: I156005f261bc0df6c3d8009db72ba2d5991c6166 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com>
2015-11-10conf: change default RTE_TARGETMaryam Tahhan1-1/+1
Change RTE_TARGET to build native instead of ivshmem. Change-Id: I3707d1f4bf545c4a2a35e85816f26dbd214a72de Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-11-03bugfix of Vanilla OVS testing scenariosMartin Klozik4-43/+49
Automatic selection of OVS and DPDK directories must be performed before initialization of modules is called. Otherwise modules will use wrong values with unpredictable results. Default directory values have been changed to point to sources build by make. Clean&sweep of directory usage was performed. Configuration file for pylint has been renamed to follow pylint naming convention. Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb JIRA: VSPERF-121 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-29First phase of Spirent Traffic Gen integrationspirentbrian2-3/+71
Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4
2015-10-23Simple performance Test for the PVP and PVVPMartin Klozik1-1/+22
Two sample contionous stream testcaes were introduced for PVP and PVVP scenarios. Required frame rate percentage can be specified either by tetcase configuration option "iLoad" or by command line option "iload". Command line option take precendece to testcase option. By default 100% linerate is used if not specified otherwise. Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b JIRA: VSPERF-95 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-10-21Flow Classification extensionMartin Klozik1-1/+7
Flow definition can be changed by testcase setup. By default only ingress ports are used to route traffic, but flow can be extended by src and dst IP addresses used by the traffic generator. Change-Id: I694714537ad2d818192a39f3235d8e6bf0f59a49 JIRA: VSPERF-90 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-20exclude files from the search in the LoaderMartin Klozik1-0/+10
New configuration parameter EXCLUDE_MODULES defines module names, which won't be automatically loaded by LoaderServant. It can be used to exclude obsolete or abstract modules. Change-Id: If98b50b1505465bcedcf28fe63421c73a4fe160a JIRA: VSPERF-118 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-15Default config picks up OVS variantsRadek Zetik1-2/+10
Running a test with vanilla-ovs, vhost-user-ovs, vhost-cuse-ovs,... does not require any building or configuration changes - the vswitch needs only to specified on the command line. The config file contains new variables for particular ovs build. OvsVanilla: OVS_DIR_VANILLA, QEMU_DIR_VANILLA VhostCuse: RTE_SDK_CUSE, OVS_DIR_CUSE, QEMU_DIR_CUSE VhostUser: RTE_SDK_USER, OVS_DIR_USER, QEMU_DIR_USER The vspef chooses right paths according to command line switches '--vswitch' (or 'VSWITCH') and '--vnf' (or 'VNF') JIRA: VSPERF-86 Change-Id: I22e3a7f9e21d6ceb13830e444716b4274314560c Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-12Enable PVP and PVVP deployments for Vanilla OVSMartin Klozik1-0/+28
Support for PVP and PVVP scenerios using Vanilla OVS was added. VMs are configured to forward traffic between virtual interfaces by standard linux capabilities. Traffic generator script was updated to accept MAC and IP address configuration to allow VM forwarding configuration. VSPERF-66, VSPERF-70 Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-07Enable PVVP deployment for DPDK Vhost User and Vhost CuseMartin Klozik3-23/+35
Generic PVVP deployment support has been added. Two new testcase scenarios for throughput and back2back tests with PVVP deployment were added. Original implementation of PVP has been refactored Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/04_vnf.conf modified: core/__init__.py modified: core/component_factory.py modified: core/loader/loader_servant.py modified: core/vnf_controller.py deleted: core/vnf_controller_p2p.py deleted: core/vnf_controller_pvp.py modified: core/vswitch_controller_p2p.py modified: core/vswitch_controller_pvp.py new file: core/vswitch_controller_pvvp.py modified: docs/to-be-reorganized/NEWS.rst modified: docs/to-be-reorganized/quickstart.rst modified: src/dpdk/dpdk.py modified: src/ovs/ofctl.py modified: testcases/testcase.py modified: tools/tasks.py new file: vnfs/qemu/qemu.py new file: vnfs/qemu/qemu_dpdk.py modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py modified: vnfs/qemu/qemu_dpdk_vhost_user.py modified: vnfs/vnf/vnf.py modified: vswitches/ovs_dpdk_vhost.py Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab JIRA: VSPERF-68, VSPERF-69 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-09-29Sysmetrics implementation updateMartin Klozik3-22/+13
New sysmetrics implementation is based on pidstat command line tool from sysstat package. Old non-functional implementation was removed. Reporting was refactored to generate report after each TC from values already available in memory. Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/05_collector.conf deleted: core/collector_controller.py modified: core/component_factory.py modified: docs/NEWS.rst modified: packages.txt modified: requirements.txt modified: testcases/testcase.py modified: tools/collectors/collector/collector.py modified: tools/collectors/sysmetrics/__init__.py deleted: tools/collectors/sysmetrics/linuxmetrics.py new file: tools/collectors/sysmetrics/pidstat.py modified: tools/report/report.jinja modified: tools/report/report.py modified: tools/systeminfo.py modified: vsperf JIRA: VSPERF-67 Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-09-24Frame Modification: support remaining frame modification types.Billy O'Mahony1-0/+3
Only works for P2P. Other deployment scenarios will need to implement the same kind of multi-table flow as P2P to enable frame modification. Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com> Change-Id: I2fa35972b90b165c00f0d0a7515fa275d0f17aa4
2015-09-01vswitches: Fix error in loading eventfd moduleDino Simeon Madarang1-1/+3
Load eventfd only when vhost-cuse is specified as the guest access method. This commit also includes quickstart update for executing PVP tests. JIRA: VSPERF-59 Change-Id: I41f116ab1c42f704026567a269922c07994b15a5 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
2015-08-26bug_fix: process pkt_size/duration from cliMaryam Tahhan1-0/+6
Refactor rfc25444_duration to duration and update the --test-params help to show the type of parameters that can be set from the cli. Also configure pkt_sizes so that it can be modified from the CLI. Also fixes the tcl script to configure framesize properly (to the value selected and not the default 64b). JIRA: VSPERF-27 Change-Id: I76dcd824977a5f940cf7476090d2d2a3acca8160 Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com>
2015-08-26Merge "Support of configurable background load and implementation of ↵Maryam Tahhan1-3/+63
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss"
2015-08-26Support of configurable background load and implementation of ↵Martin Klozik1-3/+63
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss Every testcase can be configured to run background load on the DUT. Load is generated by chosen command line tool, which must be installed according to the installation.md. Currently 'stress' and 'stress-ng' tools are supported, but support for new tool can be easily added. Load can be configured by testcase configuration option 'load'. Details about supported load generator options can be found in conf/01_testcases.conf. JIRA: VSPERF-23 JIRA: VSPERF-24 Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-08-25Merge "vswitches: Affinitize vswitch threads for OVS-DPDK"Maryam Tahhan1-0/+6
2015-08-25vswitches: Affinitize vswitch threads for OVS-DPDKDino Simeon Madarang1-0/+6
JIRA: VSPERF-64 Change-Id: I7cefd05479da6fe17357da4da558f466175dd6fc Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-08-25vnfs: Enable PVP using vhost-cuseDino Simeon Madarang2-0/+15
Enable PVP testing using vhost-cuse as guest access method Recent changes: * Move NEWS.md changes to NEWS.rst * Update comment to vhost-cuse * Restore config back to checkout state after make * Merge OPNFV 1092 updates * Add PVP-vhost-cuse to NEWS.md * Add comment/example to GUEST_CORE_BINDING * Move hardcoded values to conf/04_vnfs.conf * Set default VNF to QemuDpdkVhostCuse * Compile eventfd_link if VHOST_USER=n * Use MAC and PCI address from conf * Use vhost method in conf to properly set interface type JIRA: VSPERF-59 Change-Id: Ib1159e216f3e25b9971c0935969680582683916b Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-08-18vnfs: Enable PVP using vhost-userDino Simeon Madarang2-8/+41
Enable booting of a VM with DPDK and run testpmd for PVP testing. * Added throughput and back2back tests with pvp deployment scenario in 01_testcases.conf * PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0 * Tested on CentOS7 and Fedora 20 * Fix conflict with change 1078 Recent Changes: * Fix merge conflict (testcase.py and testcases.conf) * Remove QEMU_DIR. User must set QEMU_BIN * Set bidir traffic to True * Add flow for bi-directional traffic * Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d * Merge change 1096 (src: Add QEMU makefile) * Set virtio-net-pci csum=off and other variables to off * Move hardcoded values to conf/* JIRA: VSPERF-56 Change-Id: I4ad184531064855493483d9833a7722c9f7d3576 Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Signed-off-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2015-08-13Add new testcase for LTD.Scalability.RFC2544.0PacketLossMartin Klozik1-0/+11
This test adds a multistream config item, taking the required number of flows to setup in the traffic, to the existing testcase and then running the standard 2544 Throughput test. The config is plumbed through from the 01_testcase.conf via ITraffic to the IxNet. 01_testcase.conf contains new parameter MultiStream for 2544 Throughput test. JIRA: VSPERF-19 Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-08-06Vanilla OVS support implementationMichal Weglicki1-0/+4
JIRA: VSPERF-57 This patch implements Vanilla OVS support.It contains: * New IVswitch implementation: OvsVanilla, * New configuration contants, * New mandatory configuration variable: VSWITCH_VANILLA_PHY_PORT_NAMES for Vanilla OVS has been added, * Virtual ports are not yet implemented, * Some kernel modules wrapping methods has been moved from dpdk.py to tools. * Fixed bug where ovsdb hasn't been killed at the end of test case run on some platforms. Change-Id: I21a0d84dbc4004aae564d5547387a2563f2d1e5b Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-08-04Add a simple performance test that sends a continuous streamRadek Zetik1-0/+9
Implement a simple performance test that sends a continuous stream of traffic to the vSwitch at line rate for 30 seconds and measures the throughput Note: there is issue with calculating of the Tx Fps and Mbps based on the results from the IxNetwork traffic generator. This issue will be fixed in a later patch. JIRA: VSPERF-27 Change-Id: Ic72225888735d33398a602462af159e901fb5957 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-07-27testcase: Add frame modification configBilly O'Mahony1-2/+11
* Added a new standard set of flow table that defaults to routing phy1 to phy2 and vice-versa and allows frame modification and tuple matches to be added independently of routing. * Add a FrameMod testcase attribute - implement this for value 'vlan' * With FrameMod == 'vlan' the reported tx_fps and rx_fps figures do not match even for RFC2544 throughtput 0% packet loss - this is a pre-existing bug and a fix will be done as a separate patch. The rx_fps figure is the reliable figure. JIRA: VSPERF-27 Change-Id: Idd137b7a101305e7aebb6fabdfb6a7a4dcf8661b Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-07-17Add new biDirectional parameter for particular testcaseRadek Zetik1-0/+2
This change introduces new parameter which sets the communication between ports either uni-directional or bi-directional. JIRA: VSPERF-27 Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
2015-07-07Port RFC2544.BackToBackFrames test to vsperfDino Simeon Madarang1-0/+7
Add RFC2544.BackToBackFrames test and fix pylint errors. Remove irrelevant values of back to back test results. JIRA: VSPERF-46 Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Martin Klozik<martinx.klozik@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony8-0/+510
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>