Age | Commit message (Collapse) | Author | Files | Lines |
|
Automatic selection of OVS and DPDK directories must be performed
before initialization of modules is called. Otherwise modules will
use wrong values with unpredictable results.
Default directory values have been changed to point to sources build
by make.
Clean&sweep of directory usage was performed.
Configuration file for pylint has been renamed to follow pylint
naming convention.
Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb
JIRA: VSPERF-121
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4
|
|
Two sample contionous stream testcaes were introduced for PVP and PVVP
scenarios. Required frame rate percentage can be specified either by
tetcase configuration option "iLoad" or by command line option "iload".
Command line option take precendece to testcase option. By default 100%
linerate is used if not specified otherwise.
Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b
JIRA: VSPERF-95
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Flow definition can be changed by testcase setup. By default
only ingress ports are used to route traffic, but flow can be
extended by src and dst IP addresses used by the traffic
generator.
Change-Id: I694714537ad2d818192a39f3235d8e6bf0f59a49
JIRA: VSPERF-90
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
New configuration parameter EXCLUDE_MODULES defines module names,
which won't be automatically loaded by LoaderServant. It can be used
to exclude obsolete or abstract modules.
Change-Id: If98b50b1505465bcedcf28fe63421c73a4fe160a
JIRA: VSPERF-118
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Running a test with vanilla-ovs, vhost-user-ovs,
vhost-cuse-ovs,... does not require any building
or configuration changes - the vswitch needs only
to specified on the command line.
The config file contains new variables for particular
ovs build.
OvsVanilla:
OVS_DIR_VANILLA, QEMU_DIR_VANILLA
VhostCuse:
RTE_SDK_CUSE, OVS_DIR_CUSE, QEMU_DIR_CUSE
VhostUser:
RTE_SDK_USER, OVS_DIR_USER, QEMU_DIR_USER
The vspef chooses right paths according to command line
switches '--vswitch' (or 'VSWITCH') and '--vnf' (or 'VNF')
JIRA: VSPERF-86
Change-Id: I22e3a7f9e21d6ceb13830e444716b4274314560c
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Support for PVP and PVVP scenerios using Vanilla OVS was added.
VMs are configured to forward traffic between virtual interfaces
by standard linux capabilities. Traffic generator script was updated
to accept MAC and IP address configuration to allow VM forwarding
configuration.
VSPERF-66, VSPERF-70
Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Generic PVVP deployment support has been added. Two
new testcase scenarios for throughput and back2back
tests with PVVP deployment were added. Original
implementation of PVP has been refactored
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/04_vnf.conf
modified: core/__init__.py
modified: core/component_factory.py
modified: core/loader/loader_servant.py
modified: core/vnf_controller.py
deleted: core/vnf_controller_p2p.py
deleted: core/vnf_controller_pvp.py
modified: core/vswitch_controller_p2p.py
modified: core/vswitch_controller_pvp.py
new file: core/vswitch_controller_pvvp.py
modified: docs/to-be-reorganized/NEWS.rst
modified: docs/to-be-reorganized/quickstart.rst
modified: src/dpdk/dpdk.py
modified: src/ovs/ofctl.py
modified: testcases/testcase.py
modified: tools/tasks.py
new file: vnfs/qemu/qemu.py
new file: vnfs/qemu/qemu_dpdk.py
modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py
modified: vnfs/qemu/qemu_dpdk_vhost_user.py
modified: vnfs/vnf/vnf.py
modified: vswitches/ovs_dpdk_vhost.py
Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab
JIRA: VSPERF-68, VSPERF-69
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
New sysmetrics implementation is based on pidstat command line tool
from sysstat package. Old non-functional implementation was removed.
Reporting was refactored to generate report after each TC from values
already available in memory.
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/05_collector.conf
deleted: core/collector_controller.py
modified: core/component_factory.py
modified: docs/NEWS.rst
modified: packages.txt
modified: requirements.txt
modified: testcases/testcase.py
modified: tools/collectors/collector/collector.py
modified: tools/collectors/sysmetrics/__init__.py
deleted: tools/collectors/sysmetrics/linuxmetrics.py
new file: tools/collectors/sysmetrics/pidstat.py
modified: tools/report/report.jinja
modified: tools/report/report.py
modified: tools/systeminfo.py
modified: vsperf
JIRA: VSPERF-67
Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Only works for P2P. Other deployment scenarios will need to implement
the same kind of multi-table flow as P2P to enable frame modification.
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com>
Change-Id: I2fa35972b90b165c00f0d0a7515fa275d0f17aa4
|
|
Load eventfd only when vhost-cuse is specified as
the guest access method.
This commit also includes quickstart update for executing PVP tests.
JIRA: VSPERF-59
Change-Id: I41f116ab1c42f704026567a269922c07994b15a5
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>
|
|
Refactor rfc25444_duration to duration and update the --test-params help
to show the type of parameters that can be set from the cli. Also
configure pkt_sizes so that it can be modified from the CLI. Also fixes
the tcl script to configure framesize properly (to the value selected
and not the default 64b).
JIRA: VSPERF-27
Change-Id: I76dcd824977a5f940cf7476090d2d2a3acca8160
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com>
|
|
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss"
|
|
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss
Every testcase can be configured to run background load
on the DUT. Load is generated by chosen command line tool,
which must be installed according to the installation.md.
Currently 'stress' and 'stress-ng' tools are supported,
but support for new tool can be easily added.
Load can be configured by testcase configuration option 'load'.
Details about supported load generator options can be found
in conf/01_testcases.conf.
JIRA: VSPERF-23
JIRA: VSPERF-24
Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
|
|
JIRA: VSPERF-64
Change-Id: I7cefd05479da6fe17357da4da558f466175dd6fc
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Enable PVP testing using vhost-cuse as guest access method
Recent changes:
* Move NEWS.md changes to NEWS.rst
* Update comment to vhost-cuse
* Restore config back to checkout state after make
* Merge OPNFV 1092 updates
* Add PVP-vhost-cuse to NEWS.md
* Add comment/example to GUEST_CORE_BINDING
* Move hardcoded values to conf/04_vnfs.conf
* Set default VNF to QemuDpdkVhostCuse
* Compile eventfd_link if VHOST_USER=n
* Use MAC and PCI address from conf
* Use vhost method in conf to properly set interface type
JIRA: VSPERF-59
Change-Id: Ib1159e216f3e25b9971c0935969680582683916b
Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Enable booting of a VM with DPDK and run testpmd for
PVP testing.
* Added throughput and back2back tests with pvp deployment scenario in
01_testcases.conf
* PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0
* Tested on CentOS7 and Fedora 20
* Fix conflict with change 1078
Recent Changes:
* Fix merge conflict (testcase.py and testcases.conf)
* Remove QEMU_DIR. User must set QEMU_BIN
* Set bidir traffic to True
* Add flow for bi-directional traffic
* Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d
* Merge change 1096 (src: Add QEMU makefile)
* Set virtio-net-pci csum=off and other variables to off
* Move hardcoded values to conf/*
JIRA: VSPERF-56
Change-Id: I4ad184531064855493483d9833a7722c9f7d3576
Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com>
Signed-off-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
This test adds a multistream config item,
taking the required number of flows to setup in the traffic,
to the existing testcase and then running the standard
2544 Throughput test. The config is plumbed through
from the 01_testcase.conf via ITraffic to the IxNet.
01_testcase.conf contains new parameter MultiStream
for 2544 Throughput test.
JIRA: VSPERF-19
Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
JIRA: VSPERF-57
This patch implements Vanilla OVS support.It contains:
* New IVswitch implementation: OvsVanilla,
* New configuration contants,
* New mandatory configuration variable: VSWITCH_VANILLA_PHY_PORT_NAMES
for Vanilla OVS has been added,
* Virtual ports are not yet implemented,
* Some kernel modules wrapping methods has been moved from dpdk.py to
tools.
* Fixed bug where ovsdb hasn't been killed at the end of test case run on
some platforms.
Change-Id: I21a0d84dbc4004aae564d5547387a2563f2d1e5b
Signed-off-by: Michal Weglicki <michalx.weglicki@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
Implement a simple performance test that sends a continuous
stream of traffic to the vSwitch at line rate for 30 seconds
and measures the throughput
Note: there is issue with calculating of the Tx Fps and Mbps
based on the results from the IxNetwork traffic generator.
This issue will be fixed in a later patch.
JIRA: VSPERF-27
Change-Id: Ic72225888735d33398a602462af159e901fb5957
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
* Added a new standard set of flow table that defaults to routing phy1 to phy2
and vice-versa and allows frame modification and tuple matches to be added
independently of routing.
* Add a FrameMod testcase attribute - implement this for value 'vlan'
* With FrameMod == 'vlan' the reported tx_fps and rx_fps figures do not match
even for RFC2544 throughtput 0% packet loss - this is a pre-existing bug
and a fix will be done as a separate patch. The rx_fps figure is the
reliable figure.
JIRA: VSPERF-27
Change-Id: Idd137b7a101305e7aebb6fabdfb6a7a4dcf8661b
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This change introduces new parameter which sets the communication
between ports either uni-directional or bi-directional.
JIRA: VSPERF-27
Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
|
|
Add RFC2544.BackToBackFrames test and fix pylint errors.
Remove irrelevant values of back to back test results.
JIRA: VSPERF-46
Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Martin Klozik<martinx.klozik@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This commit adds the vSwitch Integration Test Framework whose
design, based off TOIT, is outlined in the HLD previously made
availiable to the community for review.
The design of this framework allows developers to add different
implementations of components, specifically vSwitches, Traffic
Generators, Metrics Collectors and VNFs, easily.
The goal of this design is that all testcases should run regardless of
what is "under the hood".
This commit adds support for running the framework for a phy to phy
RFC2544 testcase only. More testcases will be added by the community.
vSwitches supported at this time:
* Intel DPDK (r) accelerated OpenvSwitch
Traffic Generators supported at this time:
* IxNet - IxNetwork Implementation
* Ixia - IxExplorer Implementation
* Dummy - Manual Implementation
Metrics Collectors supported at this time:
* Linux Metrics
No VNFs are supported at this time but the framework outlines how they
should be integrated and provides APIs for them to adhere to.
JIRA: VSPERF-27
Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0
Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com>
Signed-off-by: Meghan Halton <Meghan.Halton@intel.com>
Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com>
Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com>
Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com>
Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com>
Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com>
Signed-off-by: Timo Puha <TimoX.Puha@intel.com>
Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com>
Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com>
Signed-off-by: Rory Sexton <Rory.Sexton@intel.com>
Signed-off-by: Ian Stokes <Ian.Stokes@intel.com>
Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Aihua Li <aihua.li@huawei.com>
|