Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Open vSwitch with DPDK can optimize memory usage
in case of NUMA architecture to avoid unnecessary
memory access across NUMA slots. In a nutshell,
PMD threads serving virtual NICs are co-located at
the same NUMA slot as QEMU instance, which is using
these NICs.
This patch adds new (functional) integration testcase,
which verifies OVS vHost User numa awareness feature.
Step driven test objects were updated to allow a call
of OS utilies and evaluation of conditions. Also the
documentation was updated with the list of supported
test objects and their methods.
JIRA: VSPERF-377
Change-Id: I184e71e066d27b5b9fc9e6a9f7e240e2d1b5a0fa
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
|
|
Implementation of RFC2544 throughput/back2back and
continuous testcases with 4 serial VMs.
Topology is: Phy1-VM0-VM1-VM2-VM3-Phy2.
This patch requires Patch VSPERF-326 "Integration test
implementation: Multi-PVP with explicit Flows".
v2: rebased to master to fix conflicts.
JIRA: VSPERF-364
Change-Id: Ib731bf6dc4634d6347b1c521bb82326db90a6c63
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Implementation of 3 testcases with multi-VMs in parallel.
Flows are explicitly set on UDP destination ports so that
each packet is sent to a specific VM.
Topology is: Phy1-VM1-Phy2, Phy1-VM2-Phy2,..
This patch requires change #16855 "ovs/ofctl: Fix validation
method for complex flows."
JIRA: VSPERF-326
Change-Id: I59d23354bc9c6db470a59faba13bdcd6f2beb19d
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
The test case for verifying the vxlan tunneling feature without using any
ingress tunnel traffic. The virtual switch(OVS) is configured to mangle and
generate tunnel traffic in the deployment. The packet flow in the test case is
as follows
TRAFFIC-IN --> [ENCAP-PKT] --> [MOD-PKT] --> [DECAP-PKT] --> TRAFFIC-OUT
ENCAP-PKT - Encapsulate the ingress packet to a tunnel type.
MOD-PKT - Modify the tunnel header to match the following decap interface.
DECAP-PKT - Decapsulate the newly generated tunneled packet.
Change-Id: Ie24bacb3cb1c069bd60403e5a4ef8bcdf0e12e54
Signed-off-by: Sugesh Chandran <sugesh.chandran@intel.com>
|
|
This patch fixes a typo in the integration testcase example,
otherwise settings like
{"guest_loopback" : "linux_bridge"}
are ignored.
JIRA: ONP-6635
Change-Id: Iab61d36e70f96f4a6c1f98a506753dc7fa090140
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
Fixes bi-directional param and enforces string type in
testcase configuration. Modifies all instance where bi
directional value is used to string.
* Changes documentation to specify value type as needed
* Changes traffic defaults to use string for bidir value
* Fixes testcases configuration files to use bidir as str
* Change testcase conf documentation to note enforcement
of string type
* Sets bidir to title format to keep consitency in traffic
profile when passed to traffic generators
* Fix pvp/pvvp check for bidir value
* Raise exception if testcase configuration is not set
as str for bidir value
* Change Xena bi-dir check to string compare instead of
typecasting to boolean to compare.
JIRA: VSPERF-282
Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Integration TC support has been enhanced to support PVP
and PVVP scenarios. Definition of integration testcases
have been modified to use a sort of macros for repetitive
parts.
Additional improvements were introduced:
* instances of testcases are created only for testcases
selected for execution
* new TC definition options allow to define test specific
vswitch, VNF, traffic generator and test options
* tests filter applied on pattern specified by --tests
allows to define negative filter only; In that case
list of all tests is used as base for negative filter.
* traffic values defined within teststep passed to send_traffic
is merged with default values; This is essential for execution
of TCs with linux_bridge or SRIOV support. It also simplifies
integration TC definition
* typos removed
Change-Id: Icb734a7afd7e5154f27a8ff25615a39e01f58c27
JIRA: VSPERF-213
JIRA: VSPERF-216
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Generic support for integration testcases with first
set of tests for vswitch testing.
New test option "TestSteps" has been introduced
to define test step by step directly in configuration
file.
In case that this concept will be accepted, there
are plenty of possibilities for future improvements.
For example:
* use it also for performance tests without explicit
call of validation methods
* introduce step macros for repetitive scenarios,
so new tests can be easily written
* further generalization, which would go beyond
usage of controllers and will operate directly
with vswitch, vnf and trafficgen objects
Change-Id: Ifad166c8ef9cfbda6694682fe6b3421e0e97bbf2
JIRA: VSPERF-212
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add Vanilla OVS VXLAN/GRE/GENEVE decapsulation tests
Recent changes:
* Line wrap
* Fix GENEVE IP settings
* Add GRE and GENEVE steps to integration.rst
* Add DUT_NIC1_MAC and DUT_NIC2_MAC
* Remove unnecessary call to vswitch.set_tunnel_arp
* Move optional VXLAN/GRE/GENEVE decap settings to a different section
* Add tunnel type to report files md and rst
* Fix typo error: l4 to L4 in conf/integration/03_traffic.conf
Change-Id: I8a43521668d5870ec893aed1df49467f0a84a07d
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add option to generate GENEVE frames for decapsulation
tests.
IxNet 7.3X does not have a native support of GENEVE protocol. The
template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported
into IxNET for this testcase to work.
Recent changes:
* Updated dependency
* Updated userguide
* Move inner frame variables & srcport/dstport to L4
Change-Id: I90f5fb256b51ae44bc1bc7983c599c9dbbffea08
JIRA: VSPERF-192
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Mark D. Gray <mark.d.gray@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Add option to generate GRE frames for testing GRE decapsulation
tests.
Recent changes:
* Fix merge conflict
* Updated userguides
* Complete set of fields and working decap
* Move GRE ixnet calls to if statement to reuse inner frame settings
Change-Id: I0cf9243953a72a464ae4701a858e76aecbdb8528
JIRA: VSPERF-191
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
Measure OVS DPDK VXLAN decapsulation performance.
The DUT is configured as a VTEP (VXLAN Tunnel Endpoint)
which performs decapsulation of frames and sends traffic to
the 2nd traffic generator port.
This test is unidirectional.
Recent changes:
* Userguide update
* Move src/dstport from L2 to L4 (conf, TCL)
* Fix 'TestCase' object has no attribute '_tunnel_operation' error when
running non overlay tests
* Fix merge conflict
* Move doc to docs/userguide/integration.rst
* Add setting of DUT_NIC1_MAC and setting of other
variables to docs/userguide/integration.rst
Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c
JIRA: VSPERF-190
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com>
Signed-off-by: Timo Puha <timox.puha@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com
|
|
Measure OVS DPDK and native VXLAN/GRE/GENEVE encapsulation performance.
This patch creates a new deployment scenario, Overlay_P2P.
The DUT is configured as a TEP (Tunnel Endpoint)
which performs encapsulation of frames and sends traffic to
the 2nd traffic generator port. The traffic generator in this
case receives an encapsulated frame. No decapsulation is performed
in this testcase.
Introduce a vsperf param, --run-integration, to filter tests to
integration tests. When running integration tests, variables defined
in the directory conf/integration/*conf as well as the conf/*.conf
are available.
This test case requires DPDK 2.1.0 and OVS master - 6bb4a18 or newer.
Change-Id: Ide2f418909d647119388df9b30d0d0a3656b4e53
JIRA: VSPERF-180
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|