summaryrefslogtreecommitdiffstats
path: root/conf/__init__.py
AgeCommit message (Collapse)AuthorFilesLines
2019-10-29integration: fix ovsdpdk_mq_pvp_rxqs_testpmdLukasz Pawlik1-0/+3
Parameters passed to testpmd are changed in DPDK 18.11. Setting stat-qmap does not work from command line it can be set only from testpmd application before port forwarding is started. Decrease frame rate on traffic generator to receive traffic on two queues. Change-Id: I82b8e478226d59b091154d325afed07327908250 Signed-off-by: Lukasz Pawlik <lukaszx.pawlik@intel.com>
2018-03-23python: Pylint 1.8.2 code conformityRichard Elias1-5/+5
Updated master Python scripts to conform to the newer pylint 1.8.2 standard. JIRA: VSPERF-563 Change-Id: I19305a008a2e22c2f4841aa83fed85fbdc2d549c Signed-off-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2018-01-11capture: Traffic capture examplesMartin Klozik1-0/+13
Traffic can be captured also at DUT side. Two options are supported by vsperf: 1) Traffic is captured inside VM after it has been processed by vSwitch. This can be used for verification of vSwitch frame modification functionality, including HW offloading at ingress side. 2) Another NIC under the test (NIC2) is added into standard VSPERF DUT setup. Traffic is then forwarded from TGen through NIC and vSwitch to NIC2 and then over patch cable back to NIC2, the vSwitch, NIC and to the traffic generator. This setup supports also verification of HW offloading at egress side of NIC2 and thus it can be used for validation of smart NICS. Both options above are traffic generator agnostic if compared to direct support of traffic capture by traffic generator. This patch introduces example testcases for both options. Detailed documentation will be pushed as a standalone patch. JIRA: VSPERF-556 Change-Id: I23e12e45768ae4dbe9442f74d8391c3d5b2c7895 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-03teststeps: Improvements and bugfixing of teststepsMartin Klozik1-0/+12
This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-14Merge "tests: L3, L4 and VxLAN tests for OVS & VPP"Martin Klozik1-3/+4
2017-08-04tests: L3, L4 and VxLAN tests for OVS & VPPMartin Klozik1-3/+4
A set of tests was introduced with focus on L3, L4 and VxLAN performance of OVS and VPP. New testcases were created for phy2phy network scenario. In case of PVP and PVVP, only OVS testcases are available. Notes: * two sets of OVS P2P testcases were created, one creates unique flow for each IP address involved in the test (performance sensitive); Second set inserts just one flow with large network mask (tests with _mask suffix). * three different types of VPP P2P L3 testcases were created to demonstrate performance impact of multi ARP entries or IP routes. * VPP multi ARP record based testcases use a set of "workarounds" to load a large number of ARP entries. It is not possible to use "set ip arp count" syntax, as it doesn't work well for large count values (e.g. 60K) * OVS VxLAN testcases utilize existing OP2P deployment scenario and thus it can be used also with GRE and GENEVE tunnel types. Tunnel type to be used is defined by test configuration option "Tunnel Type". JIRA: VSPERF-518 Change-Id: I65adad976f12d8625d918a1996eb42693c511ee1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
2017-07-21dpdk: Support dpdk vhost-user client modeMartin Klozik1-1/+1
Support of vhost-user client mode has been added for both OVS and VPP. VSPERF configures vhost-user server mode in vswitches by default for backward compatibility. Support of vhost-user server mode is deprecated in OVS and it can be removed in future releases. Once it will happen, we have to change vsperf default behavior to usage of vhost-user client ports at vswitch side. This patch also fixes processing of boolean configuration parameters passed via --test-params option. In the past it was not possible to set boolean value to False through --test-params option. JIRA: VSPERF-517 Change-Id: I65e341f820edd6c720043a4acc74c5140b05db18 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-06-02tests: Improvement of step driven testcasesMartin Klozik1-6/+42
A set of improvements was introduced to enhance step driven testcases capabilities. Details: * delay among test steps is configurable by TEST_STEP_DELAY parameter * step driven tool function exec was renamed to exec_shell * new step driven tool function exec_python was introduced to execute a python code * new step driven object sleep was introduced to pause test execution for defined number of seconds. * fixed bug in settings.validate_getValue() to correctly validate access of parameters modified by TEST_PARAMS * new #PARAM() macro was introduced to allow references among configuration parameters * multistream support has been added into ixnetrfc2544v2.tcl, which is used for tunneling protocols test (op2p deployment) * fixed bug in op2p deployment to list interfaces and flows from both bridges involved in the test * test report updated to state exact rfcxxxx type of traffic type, e.g. rfc2544_continuous * test report of step driven testcases was updated to contain measured values from traffic generator in CSV report * method for ovs flow comparison was modified to normalize IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8) JIRA: VSPERF-512 Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-18/+49
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik1-13/+65
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-10-05integration: Test vHost User numa awarenessMartin Klozik1-0/+15
Open vSwitch with DPDK can optimize memory usage in case of NUMA architecture to avoid unnecessary memory access across NUMA slots. In a nutshell, PMD threads serving virtual NICs are co-located at the same NUMA slot as QEMU instance, which is using these NICs. This patch adds new (functional) integration testcase, which verifies OVS vHost User numa awareness feature. Step driven test objects were updated to allow a call of OS utilies and evaluation of conditions. Also the documentation was updated with the list of supported test objects and their methods. JIRA: VSPERF-377 Change-Id: I184e71e066d27b5b9fc9e6a9f7e240e2d1b5a0fa Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-09-01multi VM: Multi VMs in serial or parallelMartin Klozik1-1/+74
Support for deployment scenarios with any number of VMs in both serial and parallel configuration. Detailed content of the patch: * VswitchControllerPXP class for multi VM support * pvvpxx and pvpvxx deployments for xx VMs in serial respective parallel configuration * special GUEST_ options expansion to requested number of VMs; * support of GUEST_ options specific macros #VMINDEX, #MAC(), #IP() and #EVAL() * all GUEST specific options are turned to lists to be VM specific * support for VM with 1 NIC * support for VM with multiple NIC pairs; traffic is routed in serial or parallel between NIC paris based on deployment scenario * support for PVVP and PVPV scenarios using VMs with different numbers of NICs JIRA: VSPERF-361 Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2015-08-26bug_fix: process pkt_size/duration from cliMaryam Tahhan1-0/+6
Refactor rfc25444_duration to duration and update the --test-params help to show the type of parameters that can be set from the cli. Also configure pkt_sizes so that it can be modified from the CLI. Also fixes the tcl script to configure framesize properly (to the value selected and not the default 64b). JIRA: VSPERF-27 Change-Id: I76dcd824977a5f940cf7476090d2d2a3acca8160 Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony1-0/+141
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>