summaryrefslogtreecommitdiffstats
path: root/conf/03_traffic.conf
AgeCommit message (Collapse)AuthorFilesLines
2018-04-11Merge "trex: Add support for burst traffic type"Martin Klozik1-2/+9
2018-03-22trex: Support of SCAPY frame definitionMartin Klozik1-1/+40
T-Rex implementation in vsperf was improved to support: * SCAPY frame definition, so additional network protocols can be generated by T-Rex and sent towards DUT * VLAN configuration defined by TRAFFIC['vlan'] * enable or disable L2, L3, L4 and VLAN protocols as configured by TRAFFIC dictionary VSPERF documentation was updated with examples of SCAPY frame definition usage. JIRA: VSPERF-565 Change-Id: Iff9baba47a1e83d321f6ba3c1c482965b9882241 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-03-22trex: Add support for burst traffic typeMartin Klozik1-2/+9
Support for burst traffic type was added into T-Rex. This traffic type is useful for tests, where a limited number of frames should be sent through DUT. JIRA: VSPERF-562 Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2018-02-23Trex_speed_improvement: Add logic for dealing with high speed cardsChristian Trautman1-0/+5
Adds configuration options and logic to detect maximum supported speed of T-Rex server side cards. 1. Adds logic to pull maximum supported speed from port info 2. Adds forcable option to have user specify maximum speed 3. If logic cannot detect speed from port_info because it is not available or the forcable option is not set it will assume 10G speeds. 4. Tested on Intel XXV25G and Mellanox ConnectX-5 cards 5. Added packet structure logging to show packet info for better debugging capabilities 6. Adds core mask to take advantage of multiple cores if server is started with more than default number of cores 7. Adds packets lost logging to RFC2544 Throughput testing JIRA: VSPERF-559 Change-Id: I7fcfda7ccc408c30830950ee3668e01b8624c20a Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2018-01-12trex: Add support for traffic captureMartin Klozik1-0/+31
A support of traffic capture was added into T-Rex. It allows to write a functional tests, which will verify proper vSwitch functionality by inspection of packets received by T-Rex. A testcase example was added into integration testcases. JIRA: VSPERF-556 Change-Id: I5ad28479ca2ec29760b68f24510af1a6d74866ae Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2017-12-19Trex_2544_verification: Add verification functionality to Trex codeChristian Trautman1-4/+5
- Adds T-Rex verification step as implemented by other trafficgens - Adds check in rfc2544 loop for if no packets are received to fail test immediately - Refactors the trial code to support the verification option - Adds trial_run function - Removed unused line speed configuration setting JIRA: VSPERF-553 Change-Id: Ie324fe8fb6bf79fe0dc337b91af2bf83e901a8ab Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-12-13trex_learning: Add learning packet option to T-Rex testingChristian Trautman1-1/+4
Adds packet learning option which is available on other Traffic generators as a feature. This adds this feature to the Trex implementation inside of VSPerf. JIRA: VSPERF-547 Change-Id: Iaf4d0721b22eb780c25e29295c112d4fcb47b22c Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-11-20Merge "paths: Modify algorithm for PATHS verification"Martin Klozik1-1/+1
2017-11-09paths: Modify algorithm for PATHS verificationMartin Klozik1-1/+1
VSPERF verifies if PATHS to the tools (vSwitch, VNF, etc.) are valid. This check was modified to take into the account tools required by selected testcase. It will help to avoid runtime errors triggered by missing tools, which are not essential for testcase execution. Change-Id: Ifcfea983cad1bdbc8c1f08c7a0281001005410df Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-11-03teststeps: Improvements and bugfixing of teststepsMartin Klozik1-1/+14
This patch introduces several improvements and small bugfixes of teststeps. These changes were identified during implementation of OVS/DPDK regression tests. Patch content: * teststeps: step aliases were implemented * teststeps: improved filtering by regex for any step, which returns string or list of stings; filter will process all lines * teststeps: support for log object * teststeps: support for trafficgen get_results call * teststeps: configurable suppression of step validation * trafficgen: remove old results before traffic is executed * trafficgen: support for flow control on/off (IxNet) * trafficgen: support for configurable learning frames (IxNet) * trafficgen: support for runtime changes of TRAFFICGEN_PKT_SIZES, _DURATION and _LOSSRATE * vnf: flush pexpect output of previous commands * vnf: use execute_and_wait() to ensure correct cmds order * vnf: dpdk vHost User interface name set according to its type, e.g. dpdkvhostuserclient * vswitch: support for OVS restart * decap: simplify configuration of tunneling decapsulation tests * settings: values of all configuration options are restored after TC execution * modified formatting of test description used by --list * testcase name and description is logged before its execution * small bugfixes JIRA: VSPERF-539 Change-Id: I550ba0d897ece89abd3f33d6d66f545c4d863e7b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-10-20trex_multistream: Add multistream support to T-RexChristian Trautman1-1/+1
Adds incremental source multi-stream functionality to T-Rex traffic generator code in VSPerf. JIRA: VSPERF-532 Change-Id: Ib5ba326699d89350ac1715c9a4276e5fa46a133e Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-09-25trex_prom: Add promiscuous option for trex for SRIOV testsChristian Trautman1-0/+2
Adds option to enable promiscuous mode for Trex traffic generator to allow for SR-IOV tests to work correctly. Trex by default only accepts packets based on destination MAC address matching what is configured on server in /etc/trex-cfg.yaml. This removes that limitation since SR-IOV tests require mac addresses to be modified in the generated packets to correctly route packets to the relevant VFs. JIRA: VSPERF-531 Change-Id: I19b64f364c8a1b656994c82c96f47a68b92486d8 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-09-20trex: RFC2544 Throughput bugfixingMartin Goldammer1-0/+4
Changes introduced by patch: * Ensure that correct results with given lossreate are returned * Add threshold value to specify the accurancy of RFC2544 Throughput measurement. Default value is 0.05. JIRA: VSPERF-530 Change-Id: I8148deba9039c3a0feb6394d6671aa10c5afaf0a Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-08-31trex: Add support Trex traffic generatorMartin Goldammer1-1/+32
Topology are two physical servers, on first is trex and second is VSPERF. Trex is running in stateless mode this means that on server where is located trex repo is running trex binary file and VSPERF working with server via python API. JIRA: VSPERF-528 Change-Id: Id8819495325ebc13fdce365f4af0e040ce68cd0e Signed-off-by: Martin Goldammer <martin.goldammer6@gmail.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-04-18xena_verify: Add final verification option to XenaChristian Trautman1-0/+8
Adds final verification option to Xena traffic generator inside VSPerf. Works by running the Xena2544.exe again after the initial run is complete with modified values inside the json file. If the final verify fails it will revert the settings and continue the in a pattern based on if the smart search is enabled. JIRA: VSPERF-506 Change-Id: Ic272628c489b88989f67549bd020af7354dc9b91 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-03-24ixia: Make L3 and L4 headers optionalMartin Klozik1-0/+10
During testing it is sometimes useful to generate pure L2 traffic without L3 or L4 related headers. IxNetwork TCL script was updated to support this option. Generic TRAFFIC array was enhanced by on/off switch for L3 and L4 headers. Thus it can be implemented by other traffic generators in the future, if this feature will prove itself useful. JIRA: VSPERF-500 Change-Id: I723c703e5d6ef609fd5b7db366871278a4730203 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-24multistream: Support huge number of streamsMartin Klozik1-2/+3
Restriction of 64K streams was limited only to L4 stream type. In case of L3 and L2 stream type, it is possible to define unlimited number of streams to be simulated by traffic generator. JIRA: VSPERF-498 Change-Id: I4ce3253299473127d135c01543999a8593b9556f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-01-24docs: Installation doc updatedMartin Klozik1-4/+5
Documentation was updated as follows: * description of vsperf downloading was added * VNF section was updated * additions to installation and virtualnev related parts * file permissions of all documentaton files was unified on 644 * README.md was updated with links to doc files and online docs * 3rd_party/readme was renamed and updated to follow markdown syntax JIRA: VSPERF-441 Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
2017-01-23xena_cont_learning: Adds learning preemption to continuous trafficChristian Trautman1-0/+5
Adds a configurable learning preemptive option when running xena continuous traffic tests. This resolves a missing packet or two when running OVS tests at flow rates that should not drop packets. JIRA: VSPERF-473 Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-0/+137
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-30yardstick: CLI params support for yardstick TCsMartin Klozik1-0/+23
Vswitchperf specific class in yardstick was updated to reflect new functionality of --test-params. These changes have impact on vsperf documentation and yardstick samples. As part of this fix following changes were made: * trafficgen mode can be executed with default configuration * yardstick specific TC samples were updated * dummy traffic generator was enhanced to support back2back * dummy traffic generator was enhanced to accept traffic results from configuration JIRA: VSPERF-422 JIRA: VSPERF-205 Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik1-0/+19
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-10-14licenses: Dedicated directory for non Apache filesMartin Klozik1-0/+4
All files, which do not comply to Apache 2.0 license, are moved into dedicated 3rd_party directory. This will simplify license checks performed on vsperf code. It is not required to move l2fwd module from its current location. JIRA: VSPERF-413 Change-Id: I6b4bd6bb5542e6db9a7ef91ee3f5f2907f93e9b8 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
2016-10-11vsperf: launch should not depend on current $PWDOtto Sabart1-1/+1
JIRA: VSPERF-392 Change-Id: I44866b7d3298617003b87b015eb08bf32c4014f7 Signed-off-by: Otto Sabart <osabart@redhat.com>
2016-09-21pkt_gen: Spirent Testcenter RFC 2889 SupportSridhar K. N. Rao1-0/+6
The changes/additions, apart from spirent testcenter-specific, also includes to some files in conf (01_testcase and 03_traffic) and core (result- constants, traffic_controller and component_factory) folders. Currently, only RFC2889 Forwarding testcase is supported. Incorporated following review suggestions: 1. Log level fixes 2. Removing unused function in results_constants.py 3. Added documentation to docs/configguide/trafficgen.rst. Userguide will be updated once other RFC2889 tests are implemented. 4. string matching in component_factory. 5. Remove Trailing Whitespaces JIRA: VSPERF-286 Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-08-09Xena_2544_tput_options: Add options for rfc 2544 testingChristian Trautman1-0/+9
Adds options to Xena for testing options when running RFC 2544 throughput testing. JIRA: VSPERF-369 Change-Id: I3145bd1a4d697d7b06cafda4f9d77cce859d1839 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-08-03pkt_gen: MoonGen start rates not correctbmichalo1-0/+4
The VSPERF traffic profile for starting rate is in a percentage of line rate. MoonGen programs its starting rate as Mpps. Therefore the traffic profile for VSPERF needs to be converted to a MoonGen format. There was a hardcoding of 14.88 that was used for the starting frame rate for all frame sizes. This needs to be corrected to take into account all frame sizes. JIRA: VSPERF-350 Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-07-20pkt_gen: Moongen class name not consistent with name in conf filesbmichalo1-1/+1
Need to change naming to 'Moongen' for consistent naming between conf files and class JIRA: VSPERF-323 Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-06-30pkt_gen: Adding MoonGen traffic generatorbmichalo1-0/+12
Adds support for the MoonGen packet generator. The following traffic types are included: * RFC 2544 Throughput: Synchronous Interface * RFC 2544 Back 2 Back: Synchronous Interface * Continous Flow: Synchronous Interface JIRA: VSPERF-168 Sample log of execution can be found as an attachment within JIRA VSPERF-168 Change-Id: I5bb84290945f4ba41bc962370e643bbbeff0e486 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-04-25xena_port_ip: Add port ip assignment for Xena traffic generatorChristian Trautman1-0/+8
Adds port ip set options as part of conf files. Allows for IPv4 address assignment. Adds ipv6 options for later implementation when available in framework. * Adds Xena to documentation area where available traffic gens are listed. JIRA: VSPERF-273 Change-Id: Ia4129222ea95f1d399d5cc0c589c9a99d7b1b81a Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-08xena: Throughput method implementation for Xena NetworksChristian Trautman1-0/+9
Add files for Xena Networks 2544 throughput implementation. This allows for Xena to execute tput tests from VSPerf. For information on how this works please see the JIRA ticket. Modify traffic gen guide on install instructions for Xena. Add in scapy to requirements file. Modify conf file for Xena chassis connection information. * Added license info to __init__.py / baseconfig.x2544 * Set initial rate to 10% line rate for tput testing * Modified default mac address xena_json->set_header_layer2 from aa:aa:aa:aa:aa:aa to cc:cc:cc:cc:cc:cc * Removed obsolete multistream params * Added traffic params to 03_traffic.conf * Comments to explain try/catch for latency values * Removed unused import * Rebased to fix merge conflict * Added Xena to available traffic gen list in conf files JIRA: VSPERF-261 Change-Id: I3c4b4a332fd532e10b6096e9ed97a4a39d410839 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-02-03Add simple VxLAN decapsulation performance testDino Simeon Madarang1-0/+2
Measure OVS DPDK VXLAN decapsulation performance. The DUT is configured as a VTEP (VXLAN Tunnel Endpoint) which performs decapsulation of frames and sends traffic to the 2nd traffic generator port. This test is unidirectional. Recent changes: * Userguide update * Move src/dstport from L2 to L4 (conf, TCL) * Fix 'TestCase' object has no attribute '_tunnel_operation' error when running non overlay tests * Fix merge conflict * Move doc to docs/userguide/integration.rst * Add setting of DUT_NIC1_MAC and setting of other variables to docs/userguide/integration.rst Change-Id: Ia44f8888ef727831543c80f5c98c866686c5c92c JIRA: VSPERF-190 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Signed-off-by: Robert Wojciechowicz <robertx.wojciechowicz@intel.com> Signed-off-by: Timo Puha <timox.puha@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com
2015-11-11pkt_gen: update testcenter implementationMaryam Tahhan1-1/+104
Update testcenter implementation to move settings to generic settings file and change windows line endings. JIRA: VSPERF-126 Change-Id: I156005f261bc0df6c3d8009db72ba2d5991c6166 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony1-0/+57
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>