summaryrefslogtreecommitdiffstats
path: root/conf/01_testcases.conf
AgeCommit message (Collapse)AuthorFilesLines
2018-04-19Merge "conf/testcases: add new continuous tests"Sridhar Rao1-0/+24
2018-03-30conf/testcases: add new continuous testsJulien Meunier1-0/+24
Add new tests with continuous stream (multiple streams and VLAN) in order to measure the throughput of a vSwitch at the line rate. JIRA: VSPERF-568 Change-Id: I0e302ab611ba417cfb0a752e49de3212cb773a24 Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
2018-03-22trex: Add support for burst traffic typeMartin Klozik1-0/+12
Support for burst traffic type was added into T-Rex. This traffic type is useful for tests, where a limited number of frames should be sent through DUT. JIRA: VSPERF-562 Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Richard Elias <richardx.elias@intel.com>
2017-11-03load_gen: Supporting loading of load_gen via loader.Sridhar K. N. Rao1-3/+6
Currently all tools are loaded via loader utility, except load_gen. Load_gens were loaded directly through component_factory. This patch adds support to load load_gens through loader utility. The changes are as follows: 1. Configuration changes:The common.conf include configuration of directory. testcases.conf includes changes to load configuration, where tool is no more part of the load-configuration. The custom.conf has configuration of LOADGEN to be used - this configuration replaces the earlier 'tool' configuration parameter. 2. loader_utility_changes: In loader.py, loadgen_loader is defined, which is used in new get_loadgen function. 3. component_factory changes: in create_loadgen, similar to other tools, the function just retuns the object of loadgen_class. 4. Renaming of Dummy load_gen: Loader fails to load properly a dummy loadgen due to name-clash with dummy in pkt_gen. To avoid this name clash dummy is renamed to dummyloadgen. 5. testcase changes: create_loadgen is now called with output of loader's get_loadgen_class. 6. Fixed Pylint Errors and extra-space at the end. 7. Included CLI options support for --loadgen and --list-loadgens. Thanks to Martin K. 8. Added the missing loadgen parameter in testcases.conf. 9. Fixed the missing comma error. 10. Added CI change in build-vsperf.sh 11. Fixed configuration reading in stress/stress.py JIRA: VSPERF-533 Change-Id: I3fbb259618825a12fef55320a748a4f02509190b Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
2017-06-02tests: Improvement of step driven testcasesMartin Klozik1-0/+10
A set of improvements was introduced to enhance step driven testcases capabilities. Details: * delay among test steps is configurable by TEST_STEP_DELAY parameter * step driven tool function exec was renamed to exec_shell * new step driven tool function exec_python was introduced to execute a python code * new step driven object sleep was introduced to pause test execution for defined number of seconds. * fixed bug in settings.validate_getValue() to correctly validate access of parameters modified by TEST_PARAMS * new #PARAM() macro was introduced to allow references among configuration parameters * multistream support has been added into ixnetrfc2544v2.tcl, which is used for tunneling protocols test (op2p deployment) * fixed bug in op2p deployment to list interfaces and flows from both bridges involved in the test * test report updated to state exact rfcxxxx type of traffic type, e.g. rfc2544_continuous * test report of step driven testcases was updated to contain measured values from traffic generator in CSV report * method for ovs flow comparison was modified to normalize IPv4 CIDR network addr (e.g. 10.0.0.5/8 => 10.0.0.0/8) JIRA: VSPERF-512 Change-Id: Ib4f38dcdfbf3820dd766b25520da0ad0c81f3293 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Ciara Loftus <ciara.loftus@intel.com>
2017-03-24multistream: Support huge number of streamsMartin Klozik1-2/+2
Restriction of 64K streams was limited only to L4 stream type. In case of L3 and L2 stream type, it is possible to define unlimited number of streams to be simulated by traffic generator. JIRA: VSPERF-498 Change-Id: I4ce3253299473127d135c01543999a8593b9556f Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-03-15vpp: Initial support of VPP vSwitchMartin Klozik1-0/+188
Support of VPP was implemented into VSPERF. Initial implementation uses step driven testcases to configure P2P, PVP and PVVP network scenarios. These testcases were prepared for three RFC2544 traffic types, i.e. throughput, continuous stream and back to back. VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS. It is possible to use three types of l2 port connection supported by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features. Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE. JIRA: VSPERF-495 Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
2017-01-27pkt_gen: STC - RFC 2889 Address Learning and Caching SupportSridhar K. N. Rao1-1/+21
This patch adds RFC-2889 address-learning-rate test and address-caching-capacity tests. The patch includes following changes 1. 01_testcases.conf: testcase definitions are added for new tests 2. results_constants.py: 3 new results constants are added, removed unsupported constants 3. testcenter-rfc2889-rest.py: Added support to these two new tests. Removed un-necessary synchronization of db-file. 5 new configuration parameters are added - which are explained in (4). 4. trafficgen.rst: Configuration description for rfc2889 tests are added. Stale information is removed. 5. testcenter.py: Support for two new tests are added. Separate functions for results analysis and parameter settings are added. 6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py, based on the traffic_type, are added. Removed trailing whitespaces from trafficgen.rst JIRA: VSPERF-395 Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2017-01-16traffic: Configurable traffic detailsMartin Klozik1-88/+84
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-12-07conf:Traffic-type naming convention and consistencySridhar K. N. Rao1-16/+16
Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-11-09cli: Modify configuration via CLIMartin Klozik1-5/+8
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-09-21pkt_gen: Spirent Testcenter RFC 2889 SupportSridhar K. N. Rao1-0/+7
The changes/additions, apart from spirent testcenter-specific, also includes to some files in conf (01_testcase and 03_traffic) and core (result- constants, traffic_controller and component_factory) folders. Currently, only RFC2889 Forwarding testcase is supported. Incorporated following review suggestions: 1. Log level fixes 2. Removing unused function in results_constants.py 3. Added documentation to docs/configguide/trafficgen.rst. Userguide will be updated once other RFC2889 tests are implemented. 4. string matching in component_factory. 5. Remove Trailing Whitespaces JIRA: VSPERF-286 Change-Id: I0195720ab2f8cf2c3a5aa490d66166bdca0afcb0 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-09-01multi VM: Multi VMs in serial or parallelMartin Klozik1-0/+8
Support for deployment scenarios with any number of VMs in both serial and parallel configuration. Detailed content of the patch: * VswitchControllerPXP class for multi VM support * pvvpxx and pvpvxx deployments for xx VMs in serial respective parallel configuration * special GUEST_ options expansion to requested number of VMs; * support of GUEST_ options specific macros #VMINDEX, #MAC(), #IP() and #EVAL() * all GUEST specific options are turned to lists to be VM specific * support for VM with 1 NIC * support for VM with multiple NIC pairs; traffic is routed in serial or parallel between NIC paris based on deployment scenario * support for PVVP and PVPV scenarios using VMs with different numbers of NICs JIRA: VSPERF-361 Change-Id: I05bedbdfa9a81ea0166d9b03d83ae49d6cb8b19b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-05-04bidirectional value: Fix inconsistency for bidir paramChristian Trautman1-3/+5
Fixes bi-directional param and enforces string type in testcase configuration. Modifies all instance where bi directional value is used to string. * Changes documentation to specify value type as needed * Changes traffic defaults to use string for bidir value * Fixes testcases configuration files to use bidir as str * Change testcase conf documentation to note enforcement of string type * Sets bidir to title format to keep consitency in traffic profile when passed to traffic generators * Fix pvp/pvvp check for bidir value * Raise exception if testcase configuration is not set as str for bidir value * Change Xena bi-dir check to string compare instead of typecasting to boolean to compare. JIRA: VSPERF-282 Change-Id: I7c91fcd7333a1d1e1371bfd31700c01d7da268b5 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-04-27integration: Support of PVP and PVVP integration TCsMartin Klozik1-0/+18
Integration TC support has been enhanced to support PVP and PVVP scenarios. Definition of integration testcases have been modified to use a sort of macros for repetitive parts. Additional improvements were introduced: * instances of testcases are created only for testcases selected for execution * new TC definition options allow to define test specific vswitch, VNF, traffic generator and test options * tests filter applied on pattern specified by --tests allows to define negative filter only; In that case list of all tests is used as base for negative filter. * traffic values defined within teststep passed to send_traffic is merged with default values; This is essential for execution of TCs with linux_bridge or SRIOV support. It also simplifies integration TC definition * typos removed Change-Id: Icb734a7afd7e5154f27a8ff25615a39e01f58c27 JIRA: VSPERF-213 JIRA: VSPERF-216 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-04-12docs: rename scalability testMaryam Tahhan1-1/+1
Rename LTD.Scalability.RFC2544.0PacketLoss to LTD.Scalability.Flows.RFC2544.0PacketLoss to indicate what is being scaled. Change-Id: I398cbccf319fc09b621e7a68d7f81e4ff8d0b050 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-03-11bugfix: Cleanup of traffic gen api and default traffic valuesMartin Klozik1-2/+3
Both documentation and traffic generator API are updated to match current code logic. Additional default values are added into TRAFFIC_DEFAULTS dictionary. Constructor of TestCase class uses default values from TRAFFIC_DEFAULTS instead of magic numbers. Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6 JIRA: VSPERF-253 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com>
2016-01-25bugfix: set default framerate/iload to 100%Martin Klozik1-3/+4
Continuous testcases should be executed with 100% of frame rate by default. Thus iLoad parameter of all continuous testcases was updated to the value of 100. Change-Id: Ia1c5a49c274d96a25ab7d9b8378ae7be6dc0b10c JIRA: VSPERF-189 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-22pkt_gen: support of standalone execution of traffic generatorMartin Klozik1-1/+5
Support for multiple modes of VSPERF operation has been added. These modes can be used for standalone execution of traffic generator or for manual testing or for execution of unsupported traffic generator. Supported modes are: "normal" - execute vSwitch, VNF and traffic generator; "trafficgen" - execute only traffic generator; "trafficgen-off" - execute vSwitch and VNF. Normal mode is selected by default. In case that trafficgen mode is selected, then various --test-params could be specified to affect traffic generator configuration. These parameters include traffic type, frame rate, bidirectional and scalability settings. Selection of transport protocol is not supported by IxNet yet (UDP is enforced), thus modification of transport protocol from command line is not supported too. Fixes of testpmd and qemu warning patches are inclduded. Change-Id: Idac10fe03e724075268a01ec3eb0817fba830aec JIRA: VSPERF-173 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-21testcase: scalability - configurable installation of flows to the vswitchMartin Klozik1-0/+12
Stream specific flows can be pre-installed into the vswitch based on the value of testcase specific configuration option "Pre-installed Flows". In case, it is set to 'Yes', then specific flow for each stream will be inserted into the switch. Otherwise only generic flows will be installed. Default value of "Pre-installed Flows" is set to 'No'. Its value can be overridden by CLI parameter pre-installed_flows. This configuration parameter is an enhancement of "MultiSream" feature and it is ignored if "MultiStream" is disabled. Python module 'netaddr' is required by this implementation and it has been added to requirements.txt file. Change-Id: I8a17577a702bf2be2753134eb203b936a87fc2e5 JIRA: VSPERF-83 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-09testcase: scalability testcase enhancementsMartin Klozik1-0/+12
Streams used by scalability testcases can be simulated at different network layers by modification of destination MAC address (L2), destination IP address (L3) or destination UDP port (L4). It is possible to define number and type of the streams by testcase definition by options "MultiStream" and "Stream Type" or by CLI parameters "multistream" and "stream_type". CLI options override testcase definition. Number of streams, their types, used transport protocol and indication of pre-installed flows are written to both result CSV file and MD file with test report. Default transport protocol was changed to UDP because IxNetwork configuration script doesn't support TCP yet. Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1 JIRA: VSPERF-81 JIRA: VSPERF-82 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-10-23Simple performance Test for the PVP and PVVPMartin Klozik1-1/+22
Two sample contionous stream testcaes were introduced for PVP and PVVP scenarios. Required frame rate percentage can be specified either by tetcase configuration option "iLoad" or by command line option "iload". Command line option take precendece to testcase option. By default 100% linerate is used if not specified otherwise. Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b JIRA: VSPERF-95 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-10-21Flow Classification extensionMartin Klozik1-1/+7
Flow definition can be changed by testcase setup. By default only ingress ports are used to route traffic, but flow can be extended by src and dst IP addresses used by the traffic generator. Change-Id: I694714537ad2d818192a39f3235d8e6bf0f59a49 JIRA: VSPERF-90 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-07Enable PVVP deployment for DPDK Vhost User and Vhost CuseMartin Klozik1-0/+16
Generic PVVP deployment support has been added. Two new testcase scenarios for throughput and back2back tests with PVVP deployment were added. Original implementation of PVP has been refactored Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/04_vnf.conf modified: core/__init__.py modified: core/component_factory.py modified: core/loader/loader_servant.py modified: core/vnf_controller.py deleted: core/vnf_controller_p2p.py deleted: core/vnf_controller_pvp.py modified: core/vswitch_controller_p2p.py modified: core/vswitch_controller_pvp.py new file: core/vswitch_controller_pvvp.py modified: docs/to-be-reorganized/NEWS.rst modified: docs/to-be-reorganized/quickstart.rst modified: src/dpdk/dpdk.py modified: src/ovs/ofctl.py modified: testcases/testcase.py modified: tools/tasks.py new file: vnfs/qemu/qemu.py new file: vnfs/qemu/qemu_dpdk.py modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py modified: vnfs/qemu/qemu_dpdk_vhost_user.py modified: vnfs/vnf/vnf.py modified: vswitches/ovs_dpdk_vhost.py Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab JIRA: VSPERF-68, VSPERF-69 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-09-29Sysmetrics implementation updateMartin Klozik1-11/+0
New sysmetrics implementation is based on pidstat command line tool from sysstat package. Old non-functional implementation was removed. Reporting was refactored to generate report after each TC from values already available in memory. Following files were affected: modified: conf/01_testcases.conf modified: conf/02_vswitch.conf modified: conf/05_collector.conf deleted: core/collector_controller.py modified: core/component_factory.py modified: docs/NEWS.rst modified: packages.txt modified: requirements.txt modified: testcases/testcase.py modified: tools/collectors/collector/collector.py modified: tools/collectors/sysmetrics/__init__.py deleted: tools/collectors/sysmetrics/linuxmetrics.py new file: tools/collectors/sysmetrics/pidstat.py modified: tools/report/report.jinja modified: tools/report/report.py modified: tools/systeminfo.py modified: vsperf JIRA: VSPERF-67 Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4 Signed-off-by: Martin Klozik (martinx.klozik@intel.com) Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-09-24Frame Modification: support remaining frame modification types.Billy O'Mahony1-0/+3
Only works for P2P. Other deployment scenarios will need to implement the same kind of multi-table flow as P2P to enable frame modification. Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com> Change-Id: I2fa35972b90b165c00f0d0a7515fa275d0f17aa4
2015-08-26Support of configurable background load and implementation of ↵Martin Klozik1-3/+63
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss Every testcase can be configured to run background load on the DUT. Load is generated by chosen command line tool, which must be installed according to the installation.md. Currently 'stress' and 'stress-ng' tools are supported, but support for new tool can be easily added. Load can be configured by testcase configuration option 'load'. Details about supported load generator options can be found in conf/01_testcases.conf. JIRA: VSPERF-23 JIRA: VSPERF-24 Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-08-18vnfs: Enable PVP using vhost-userDino Simeon Madarang1-1/+16
Enable booting of a VM with DPDK and run testpmd for PVP testing. * Added throughput and back2back tests with pvp deployment scenario in 01_testcases.conf * PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0 * Tested on CentOS7 and Fedora 20 * Fix conflict with change 1078 Recent Changes: * Fix merge conflict (testcase.py and testcases.conf) * Remove QEMU_DIR. User must set QEMU_BIN * Set bidir traffic to True * Add flow for bi-directional traffic * Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d * Merge change 1096 (src: Add QEMU makefile) * Set virtio-net-pci csum=off and other variables to off * Move hardcoded values to conf/* JIRA: VSPERF-56 Change-Id: I4ad184531064855493483d9833a7722c9f7d3576 Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com> Signed-off-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2015-08-13Add new testcase for LTD.Scalability.RFC2544.0PacketLossMartin Klozik1-0/+11
This test adds a multistream config item, taking the required number of flows to setup in the traffic, to the existing testcase and then running the standard 2544 Throughput test. The config is plumbed through from the 01_testcase.conf via ITraffic to the IxNet. 01_testcase.conf contains new parameter MultiStream for 2544 Throughput test. JIRA: VSPERF-19 Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-08-04Add a simple performance test that sends a continuous streamRadek Zetik1-0/+9
Implement a simple performance test that sends a continuous stream of traffic to the vSwitch at line rate for 30 seconds and measures the throughput Note: there is issue with calculating of the Tx Fps and Mbps based on the results from the IxNetwork traffic generator. This issue will be fixed in a later patch. JIRA: VSPERF-27 Change-Id: Ic72225888735d33398a602462af159e901fb5957 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-07-27testcase: Add frame modification configBilly O'Mahony1-2/+11
* Added a new standard set of flow table that defaults to routing phy1 to phy2 and vice-versa and allows frame modification and tuple matches to be added independently of routing. * Add a FrameMod testcase attribute - implement this for value 'vlan' * With FrameMod == 'vlan' the reported tx_fps and rx_fps figures do not match even for RFC2544 throughtput 0% packet loss - this is a pre-existing bug and a fix will be done as a separate patch. The rx_fps figure is the reliable figure. JIRA: VSPERF-27 Change-Id: Idd137b7a101305e7aebb6fabdfb6a7a4dcf8661b Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-07-17Add new biDirectional parameter for particular testcaseRadek Zetik1-0/+2
This change introduces new parameter which sets the communication between ports either uni-directional or bi-directional. JIRA: VSPERF-27 Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
2015-07-07Port RFC2544.BackToBackFrames test to vsperfDino Simeon Madarang1-0/+7
Add RFC2544.BackToBackFrames test and fix pylint errors. Remove irrelevant values of back to back test results. JIRA: VSPERF-46 Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Meghan Halton <meghan.halton@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Martin Klozik<martinx.klozik@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-06-08framework: Add reworked framework to repoBilly O'Mahony1-0/+40
This commit adds the vSwitch Integration Test Framework whose design, based off TOIT, is outlined in the HLD previously made availiable to the community for review. The design of this framework allows developers to add different implementations of components, specifically vSwitches, Traffic Generators, Metrics Collectors and VNFs, easily. The goal of this design is that all testcases should run regardless of what is "under the hood". This commit adds support for running the framework for a phy to phy RFC2544 testcase only. More testcases will be added by the community. vSwitches supported at this time: * Intel DPDK (r) accelerated OpenvSwitch Traffic Generators supported at this time: * IxNet - IxNetwork Implementation * Ixia - IxExplorer Implementation * Dummy - Manual Implementation Metrics Collectors supported at this time: * Linux Metrics No VNFs are supported at this time but the framework outlines how they should be integrated and provides APIs for them to adhere to. JIRA: VSPERF-27 Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0 Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com> Signed-off-by: Meghan Halton <Meghan.Halton@intel.com> Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com> Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com> Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com> Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com> Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com> Signed-off-by: Timo Puha <TimoX.Puha@intel.com> Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com> Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com> Signed-off-by: Rory Sexton <Rory.Sexton@intel.com> Signed-off-by: Ian Stokes <Ian.Stokes@intel.com> Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com> Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Aihua Li <aihua.li@huawei.com>