Age | Commit message (Collapse) | Author | Files | Lines |
|
Generic PVVP deployment support has been added. Two
new testcase scenarios for throughput and back2back
tests with PVVP deployment were added. Original
implementation of PVP has been refactored
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/04_vnf.conf
modified: core/__init__.py
modified: core/component_factory.py
modified: core/loader/loader_servant.py
modified: core/vnf_controller.py
deleted: core/vnf_controller_p2p.py
deleted: core/vnf_controller_pvp.py
modified: core/vswitch_controller_p2p.py
modified: core/vswitch_controller_pvp.py
new file: core/vswitch_controller_pvvp.py
modified: docs/to-be-reorganized/NEWS.rst
modified: docs/to-be-reorganized/quickstart.rst
modified: src/dpdk/dpdk.py
modified: src/ovs/ofctl.py
modified: testcases/testcase.py
modified: tools/tasks.py
new file: vnfs/qemu/qemu.py
new file: vnfs/qemu/qemu_dpdk.py
modified: vnfs/qemu/qemu_dpdk_vhost_cuse.py
modified: vnfs/qemu/qemu_dpdk_vhost_user.py
modified: vnfs/vnf/vnf.py
modified: vswitches/ovs_dpdk_vhost.py
Change-Id: Ib6869a29337a184cb58c57fd96bba1183aba00ab
JIRA: VSPERF-68, VSPERF-69
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
|
|
New sysmetrics implementation is based on pidstat command line tool
from sysstat package. Old non-functional implementation was removed.
Reporting was refactored to generate report after each TC from values
already available in memory.
Following files were affected:
modified: conf/01_testcases.conf
modified: conf/02_vswitch.conf
modified: conf/05_collector.conf
deleted: core/collector_controller.py
modified: core/component_factory.py
modified: docs/NEWS.rst
modified: packages.txt
modified: requirements.txt
modified: testcases/testcase.py
modified: tools/collectors/collector/collector.py
modified: tools/collectors/sysmetrics/__init__.py
deleted: tools/collectors/sysmetrics/linuxmetrics.py
new file: tools/collectors/sysmetrics/pidstat.py
modified: tools/report/report.jinja
modified: tools/report/report.py
modified: tools/systeminfo.py
modified: vsperf
JIRA: VSPERF-67
Change-Id: I25a79f2afef405b9ac46ae85c18044af167a62a4
Signed-off-by: Martin Klozik (martinx.klozik@intel.com)
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Only works for P2P. Other deployment scenarios will need to implement
the same kind of multi-table flow as P2P to enable frame modification.
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Dino Madarang <dino.simeonx.madarang@intel.com>
Change-Id: I2fa35972b90b165c00f0d0a7515fa275d0f17aa4
|
|
LTD.CPU.RFC2544.0PacketLoss and LTD.Memory.RFC2544.0PacketLoss
Every testcase can be configured to run background load
on the DUT. Load is generated by chosen command line tool,
which must be installed according to the installation.md.
Currently 'stress' and 'stress-ng' tools are supported,
but support for new tool can be easily added.
Load can be configured by testcase configuration option 'load'.
Details about supported load generator options can be found
in conf/01_testcases.conf.
JIRA: VSPERF-23
JIRA: VSPERF-24
Change-Id: I3e1aebc0d41357f5a2764015c41ffc7e50fdbf8b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
Enable booting of a VM with DPDK and run testpmd for
PVP testing.
* Added throughput and back2back tests with pvp deployment scenario in
01_testcases.conf
* PVP requires DPDK 2.0 with VHOST_USER enabled and QEMU 2.2.0
* Tested on CentOS7 and Fedora 20
* Fix conflict with change 1078
Recent Changes:
* Fix merge conflict (testcase.py and testcases.conf)
* Remove QEMU_DIR. User must set QEMU_BIN
* Set bidir traffic to True
* Add flow for bi-directional traffic
* Use working OVS_TAG ad2e649834be20dd01b1632799fe778106a96a2d
* Merge change 1096 (src: Add QEMU makefile)
* Set virtio-net-pci csum=off and other variables to off
* Move hardcoded values to conf/*
JIRA: VSPERF-56
Change-Id: I4ad184531064855493483d9833a7722c9f7d3576
Signed-off-by: Madarang, Dino Simeon <dino.simeonx.madarang@intel.com>
Signed-off-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
This test adds a multistream config item,
taking the required number of flows to setup in the traffic,
to the existing testcase and then running the standard
2544 Throughput test. The config is plumbed through
from the 01_testcase.conf via ITraffic to the IxNet.
01_testcase.conf contains new parameter MultiStream
for 2544 Throughput test.
JIRA: VSPERF-19
Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
Implement a simple performance test that sends a continuous
stream of traffic to the vSwitch at line rate for 30 seconds
and measures the throughput
Note: there is issue with calculating of the Tx Fps and Mbps
based on the results from the IxNetwork traffic generator.
This issue will be fixed in a later patch.
JIRA: VSPERF-27
Change-Id: Ic72225888735d33398a602462af159e901fb5957
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
|
|
* Added a new standard set of flow table that defaults to routing phy1 to phy2
and vice-versa and allows frame modification and tuple matches to be added
independently of routing.
* Add a FrameMod testcase attribute - implement this for value 'vlan'
* With FrameMod == 'vlan' the reported tx_fps and rx_fps figures do not match
even for RFC2544 throughtput 0% packet loss - this is a pre-existing bug
and a fix will be done as a separate patch. The rx_fps figure is the
reliable figure.
JIRA: VSPERF-27
Change-Id: Idd137b7a101305e7aebb6fabdfb6a7a4dcf8661b
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This change introduces new parameter which sets the communication
between ports either uni-directional or bi-directional.
JIRA: VSPERF-27
Change-Id: I4eb06f5c91ef42147878cb68cbad24e69eb002c1
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
|
|
Add RFC2544.BackToBackFrames test and fix pylint errors.
Remove irrelevant values of back to back test results.
JIRA: VSPERF-46
Change-Id: I7a0dfd9494b509c3be7bffc0678228838d3059a1
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Meghan Halton <meghan.halton@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
Reviewed-by: Martin Klozik<martinx.klozik@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This commit adds the vSwitch Integration Test Framework whose
design, based off TOIT, is outlined in the HLD previously made
availiable to the community for review.
The design of this framework allows developers to add different
implementations of components, specifically vSwitches, Traffic
Generators, Metrics Collectors and VNFs, easily.
The goal of this design is that all testcases should run regardless of
what is "under the hood".
This commit adds support for running the framework for a phy to phy
RFC2544 testcase only. More testcases will be added by the community.
vSwitches supported at this time:
* Intel DPDK (r) accelerated OpenvSwitch
Traffic Generators supported at this time:
* IxNet - IxNetwork Implementation
* Ixia - IxExplorer Implementation
* Dummy - Manual Implementation
Metrics Collectors supported at this time:
* Linux Metrics
No VNFs are supported at this time but the framework outlines how they
should be integrated and provides APIs for them to adhere to.
JIRA: VSPERF-27
Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0
Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com>
Signed-off-by: Meghan Halton <Meghan.Halton@intel.com>
Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com>
Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com>
Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com>
Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com>
Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com>
Signed-off-by: Timo Puha <TimoX.Puha@intel.com>
Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com>
Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com>
Signed-off-by: Rory Sexton <Rory.Sexton@intel.com>
Signed-off-by: Ian Stokes <Ian.Stokes@intel.com>
Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Aihua Li <aihua.li@huawei.com>
|