Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 32a5263216d79ad34041dca55357278f092bb931.
Change-Id: I641b967badffd52ffd9e249b75e67bb7c82a8150
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This reverts commit 255f58a8c64fcb2875f7616dfcbbfeef2173efcb.
Change-Id: Iccaaf205da26a49744b06e019b000e824e4c45cd
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: Iab221ca0ea22156830c2a106695e305f965d5226
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
testing/developer and modified doc index to match dir structure
Change-Id: I4b1a535808a48773505fa7874c61707cd349fced
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I448fd909a89103b2c11cb16f91b8c646fb5adee8
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
VSPERF reports were updated to contain vSwitch name.
In case of VPP, it is not possible to read its version
if VPP is not running. Thus VSPERF was enhanced
to support tool version check during its runtime. This
mechanism can be enhanced to support e.g. VNF in the future.
JIRA: VSPERF-496
Change-Id: I74b47505e35340eead165d9b588e9cc15c058bbf
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
|
|
Support of VPP was implemented into VSPERF. Initial implementation
uses step driven testcases to configure P2P, PVP and PVVP network
scenarios. These testcases were prepared for three RFC2544 traffic
types, i.e. throughput, continuous stream and back to back.
VPP configuration is driven by new configuration option VSWITCH_VPP_ARGS.
It is possible to use three types of l2 port connection supported
by VPP, i.e. l2 xconnect (default), l2patch and l2 bridge features.
Configuration is driven by parameter VSWITCH_VPP_L2_CONNECT_MODE.
JIRA: VSPERF-495
Change-Id: Idebef9b10fb0d70796adb3405fec77302de00a7e
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I8383b469f5350f4457cf234de2a4ff8f79151afe
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
|
|
The scapy python script (data.py) parses the file /etc/services
using the default utf8 decoder. Unfortunately, there are some
characters in that file which are non-utf8 hence the script
stops prematurely. This patch addresses that issue.
Change-Id: Ib5bd41d4fc60b4ce1072fe71b14769b02da7b724
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
Change-Id: I55d50656930f386b55924ee23948b2e321d2745b
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
doc structure
Remove reference to NEWS.rst in index file ... release notes will be referenced in Release section
Change-Id: I8f32c7cd23b0b2cd33703950a71cbb626c0c35fc
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
This patch enables openSUSE Leap 42.2 systems to build and run VSPERF.
Change-Id: I182cec8a11ee5f0d70670f1ae18dd35fcc257616
Signed-off-by: Marco Varlese <marco.varlese@suse.com>
|
|
|
|
Wrong characters were inserted into requirements.txt during
modification of file license header. This bug caused issues
during installation of vsperf by installation scripts.
Problematic line was removed to avoid installation failures.
JIRA: VSPERF-489
Change-Id: I399eb8ecc7c42a9c42fb1e697dd6322fc9867951
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Marco Varlese <marco.varlese@suse.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Change-Id: I122bdec1a7fa9a9e3da51acb31b30a231eff7890
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
Missed this small issue when calling continuous streams caused
by the param name change from the pylint patch in XenaDriver.py
ca9c9275ed6d5d852987c69a378e88a3502cb2ab.
Change-Id: Ic8ad86358f72e91edea34cb37207d7dc583128b4
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
This patch fixes a bug caused due to wrong parameter ordering.
stc_common_settings should come after rfc2544_common_settings.
It also gets rid of 'Import' error for module 'conf'
JIRA: VSPERF-491
Change-Id: I356294b4efdf9ebd0cea4492d3ed1cb8e04ec9b1
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
All files were updated with license header. In case
of binary files is license stored in LICENSE file stored
in the same directory. Packages.txt was removed, because
file has not been used.List of packages differs according
OS distribution, all of neccesary packages are include in
instalation scripts
JIRA: VSPERF-489
Change-Id: I6ecae21b8db2a0f22fa5a66f9525352080f1fcc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Pylint should be executed automatically for every patch
to assure, that new code meets vsperf coding standards.
JIRA: VSPERF-114
Change-Id: Icb1000e207b2d728497ff3d349fb3cb8334baac7
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
|
|
SRIOV functionality should be regularly tested to detect
any issues brought by new features. Testcase pvp_tput
will be executed by daily job for several packet sizes.
Testcase results will be reported and stored into artifactory,
but they won't be stored into result database.
JIRA: VSPERF-390
Change-Id: I9f6290b3be297a84c185681ce354bc7365b4036c
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
All python files must reach pylint score 10/10. This will be
regularly verified by Jenkins jobs to keep constant code quality.
VSPERF specific pylintrc file was updated according to the vsperf
coding standards. Distro version included in reports will be
slightly different, due to migration to new python package distro.
Previously used platform.distro() will be deprecated since python 3.7.
JIRA: VSPERF-487
Change-Id: I934120208b9624787a3567ccaa49e14d77d7a5bf
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.
JIRA: VSPERF-442
Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
VSPERF with DPDK 16.04 and 16.07 did not work on Fedora 20-22.
Installtion scripts for F20-F22 were deleted. VSPERF supports
F24 and F25.
JIRA: VSPERF-475
Change-Id: I3ce62b8883844cbcaab5b75fb9374068f9fced16
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
This patch fixes the setting of the packet fields generated by IXIA.
So that packets will be created with the values we pass, eg UDP
source port, UDP dest port, MAC source address.
JIRA: VSPERF-477
Change-Id: I15371b9f4e5fe60f738fc0e836ec7abc4f2a3938
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik martinx.klozik@intel.com
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds installer script for Fedora 25. Kernel version on Fedora 25
requires DPDK 16.11 and newer. VSPERF user must use DPDK and OVS
versions, which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: Icb86ea7655e95df57a8052e4a8523348a0c75dc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
List of commiters was updated and name of IRC channel added.
Change-Id: Ib12cc5fd9991f5918be06e0bccf5ef09dcff5628
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
Adds installer script for Fedora 24. Kernel version on Fedora 24
requires DPDK 16.11 and newer. VSPERF user must ensure, that used DPDK
and OVS version which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: I08846d6e51faa578ea9305173174bfc49b77018a
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Modifies RTE_TARGET in conf/10_custom.conf which overwrites
default value in 02_vswitch.conf file.
JIRA: VSPERF-359
Change-Id: I83561d94543a6543764cd76eb4376ccdc091a4cd
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Documentation was updated as follows:
* description of vsperf downloading was added
* VNF section was updated
* additions to installation and virtualnev related parts
* file permissions of all documentaton files
was unified on 644
* README.md was updated with links to doc files
and online docs
* 3rd_party/readme was renamed and updated to follow
markdown syntax
JIRA: VSPERF-441
Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
|
|
|
|
|
|
|
|
New section specific to upgrade was added into documentation.
Description of configuration changes beetween Colorado and
Danube releases is discussed in detail.
JIRA: VSPERF-269
Change-Id: Ibbd1bb447e5d85c6b269ad26e10ff5d646a2bfbe
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Second patch to help improve Xena continuous traffic accuracy.
Increases delay before gathering statistics to allow packets in
flight to be received. Changes bps and fps to be calculated
based on total bytes and packets received versus capturing the
data while port is transmitting from active statistics.
Sets time limit on ports based on duration.
JIRA: VSPerf-423
Change-Id: I574819694d3141edb539de64bc16dcd6c6fcf489
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Removes un-needed code to set multi-queue option on vhostuser ports.
JIRA: VSPerf-471
Change-Id: I9f58e53d9a9bb62ef5ed441a7b4b1dea37a2f557
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds installer script for CentOS 7.3. Modifications are
based on installation script for RHEL7.3.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream vanilla OVS from building due to kernel
incompatibilities.
JIRA: VSPERF-452
Change-Id: Iaf05de0cf2ad7f5636d9474f351d3c7d193123cf
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
|
|
Adds section about mergable buffers option to testusage doc.
Also adds drive boot type info into gotchas section of
testusage doc.
JIRA: VSPERF-459
Change-Id: I159273502663dd29f4847b0737535009a42e430d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|