Age | Commit message (Collapse) | Author | Files | Lines |
|
Change hugepage detection to check if hugepages are configured. Also
verifies enough free hugepages are available based on test
configuration. Will result in an exception if not enough hugepages
are found. This performs the check based on the guest memory configs
as well as the dpdk socket configs.
Adds some new methods to check for free hugepages based on all
hugepages or for socket free hugepages.
Adds new logging indicitaing needed and free hugepages as well as info
level event if hugepages are not configured at recommended 1GB size.
JIRA: VSPerf-255
Change-Id: I80d5605308861070c412568d8d40339f01b9718b
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
For MoonGen, the final results parameters: throughput_rx_percent,
throughput_tx_percent were incorrectly calculated when converting
MoonGen to VSPERF format. In particular, this would occur when more
than one data stream (single channel unidirectional traffic) was used in
the test. When calculating these percentages, only aggregate throughput
values equaling unidirectional traffic were used (for example, for 64
byte frames bidirectional traffic should use 29.76 Mpps, not 14.88 Mpps)
JIRA: VSPERF-341
Change-Id: Ie62bded7aea023c287697f18c4172b58c320e050
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
|
|
|
|
|
|
Initial creation of namespace fails because var/run/netns does not
exist.
JIRA: VSPERF-366
Change-Id: I02e5aef52e1675f303405b69c7461ca6482903af
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Order of NIC PCI IDs handling was changed to ensure their
check and possible expansion (by missing domain part)
before their first usage. This avoids a vsperf crash
in case that sriov is configured and short NIC PCI IDs
are used.
JIRA: VSPERF-363
Change-Id: I91f724e9558bce5a92520de72b4bf000f33d2f29
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Testpmd forwarding mode mac_retry was obsoleted in DPDK v16.07.
Retry option is supported by multiple forwarding modes now.
Former "mac_retry" mode can be replaced by "mac retry" construct.
JIRA: VSPERF-333
Change-Id: I1563427985966264f07d10b1a8351784fe999d74
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
|
|
Recent versions of DPDK (16.xx) depend on numa library.
Thus installation scripts were updated to install both
binary and development packages.
JIRA: VSPERF-360
Change-Id: Idd0eac8758f30a355909bb804e99e650b67bba8b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Updated version of vloop-vnf image was added into the changelog inside
installation guide.
JIRA: VSPERF-349
Change-Id: I64a1acdf2191858dc282ea6c3b588048b3bdd742
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
If no hugepages are available, try to allocate HUGEPAGE_RAM_ALLOCATION
amount of RAM for hugepages.
JIRA: VSPERF-290
Change-Id: I092b3831254579eeebbe45e85884828f9d749895
Signed-off-by: Mars Toktonaliev <mars.toktonaliev@nokia.com>
|
|
Xena exception when no stats collected on receive on one port
during bi-directional traffic. Modify aggregate_stats in the
XenaDriver.py, add judge whether the two port both has stats,
if one port has no stats, the result use the port's value which
has stats.
JIRA: VSPERF-327
Change-Id: I18c349d609a2834907f0383dbfbebd5cd281f541
Signed-off-by: liting <tli@redhat.com>
|
|
The VSPERF traffic profile for starting rate is in a
percentage of line rate. MoonGen programs its
starting rate as Mpps. Therefore the traffic profile
for VSPERF needs to be converted to a MoonGen format.
There was a hardcoding of 14.88 that was used for the
starting frame rate for all frame sizes. This needs
to be corrected to take into account all frame sizes.
JIRA: VSPERF-350
Change-Id: Ied71668a560d7d2b03483f9a1192dd2fb4965996
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
Release notes were updated with features introduced by Colorado
release.
JIRA: VSPERF-349
Change-Id: I43179028c973cae4be6746e633c27fd3419e951a
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
|
|
Results from other traffic generators are reported as
pure numbers, i.e. 2477356.0000. These values are
consumed and processed by other scripts (e.g. CI or
OPNFV results visualization), so we should keep it
consistent among various traffic generators.
JIRA: VSPERF-342
Change-Id: I305421287eb632707038f2c8bc594fcb255ec939
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
|
|
|
|
Configuration guide has been updated with description of
IxNetwork specific configuration options. New section was added
with description of test results sharing between IxNetwork and
VSPERF.
Additional changes:
* wrong formatting inside installation.rst was fixed
* description of IxNetwork configuration was updated inside ixnet.py
JIRA: VSPERF-302
Change-Id: Ida0e086e69b82fd1f9821d16ea750b2dec1d5aa2
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
This patch adds to Integration docs some simple testcase examples
like a HelloWorld. The purpose is to show how to use some basic
features: rules on L3/L4 fields, MultiStream, Multi-VM setup.
Patch Set 2: removed trailing whitespaces.
Patch Set 3: moved the examples to the middle of the file to avoid
potential conflicts with the VxLan TC patch from Sugesh.
Patch Set 4: fix typo.
Patch Set 5: added descriptions on each example.
Patch Set 6: reworked description for VM Replacement TC.
JIRA: VSPERF-331
Change-Id: I9dea23c26138db874fd67f41d8de8a628db5d91f
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
MoonGen needs to take into account the VLAN tag 'enable'
control knob defined within the VSPERF traffic profile
and therefore only insert the VLAN tag when its 'True'.
JIRA: VSPERF-329
Change-Id: Idbeed2f7e6411f0c28aa56a2d3e71bd7a79d975a
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
DPDK 16.07-rc5 has renamed script tools/dpdk_nic_bind.py
to tools/dpdk-devbind.py. VSPERF was updated to use wildcard
in the script name, which is backward compatible.
Function get_version() from tools/systeminfo was updated
to correctly parse version information for DPDK v16. Version
name includes a minor version as defined inside rte_version.h.
It means, that for tag v16.07-rc5 VSPERF will show v16.07.0-rc5
in the report.
JIRA: VSPERF-333
Change-Id: I61a4ab2d90304fffdfc4d22a5cbf0cb7295402b3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Fix Xena2544.exe execution with mono where sometimes the
Xena process says complete, but the mono process doesn't exit.
Changes call of Xena2544.exe from communicate thread lock to a
wait try/catch block and checks the log periodically to see
if a deadlock has occured and if so, the mono pid is terminated
to prevent deadlock.
* Fix one small issue with typecasting to int, changed to float
JIRA: VSPERF-319
Change-Id: Ie7a86a2b9ff9cdfacba5a912ad17df6cc0581702
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Wrong whitespace characters breaks automatic generation of VSPERF
documentation. It is necessary to remove wrong characters before
merge of the draft into VSPERF doc, e.g. by filtering through
tr -d '\014'
JIRA: VSPERF-324
Change-Id: Ie280f5a443c89d4235cae5eb89fdceae74ea4213
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
Need to change naming to 'Moongen' for consistent naming
between conf files and class
JIRA: VSPERF-323
Change-Id: Ic580b68323a759b3c2ef7ca3c07006243a3acf7d
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Script for generation of documentation has been moved from releng
into new opnfvdocs repository. VSPERF script for a daily CI job is
calling this script for overall PDF report generation. Thus it must
be updated to use new script location.
JIRA: VSPERF-324
Change-Id: I173a2139c57c39acb25c14f7a082e0ff0a888b2f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
|
|
|
|
|
|
|
|
ovs-appctl was broken due to a previous commit which changed the
location of the ovs-vswitchd pid file. This fixes it by placing
the pid back in the default location where ovs-appctl is looking
for.
JIRA: VSPERF-315
Change-Id: I4ae87ad566acb69ac9d565a3a77865f5a6861b93
Signed-off-by: MartinX Klozik <martinx.klozik@intel.com>
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
This patch fixes a typo in the integration testcase example,
otherwise settings like
{"guest_loopback" : "linux_bridge"}
are ignored.
JIRA: ONP-6635
Change-Id: Iab61d36e70f96f4a6c1f98a506753dc7fa090140
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
JIRA: VSPERF-??
Change-Id: I1f07a70bf3c8604df890defd8493f107550bf8f3
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
|
|
|
|
Change-Id: Ife16738ea8717749c52e950404257936994fe273
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>
|
|
DPDK 16.07 changed the default log level of DPDK enabled applications.
Detection of the end of OVS initialization procedure has been changed
to work for various DPDK versions and for both DPDK and Vanilla OVS.
JIRA: VSPERF-316
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Documentation update based on review comments received after
the merge of original patch.
JIRA: VSPERF-288
Change-Id: I86305fa064cc07e2e0797276a7b89b1d4b23d126
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
The current validation method for 'add_flow' commands
does not work properly with complex flows, like UDP flows.
It always returns that the flow was not set, even though
the add_flow command was successful.
JIRA: ONP-6579
Change-Id: Iaad77551326ff495cb68a033e1303450a99386bd
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
|
|
|
|
Yardstick supports execution of vsperf specific testcases.
These testcases are specified by YAML files located
inside yardstick/tests directory. Documentation describing
yardstick usage and execution of vsperf testcases is
part of the userguide.
JIRA: VSPERF-288
Change-Id: I5a575d28d344e0f3e0a1c8434e2f3231fd312d31
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
|
|
|