Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch adds RFC-2889 address-learning-rate test and
address-caching-capacity tests. The patch includes following changes
1. 01_testcases.conf: testcase definitions are added for new tests
2. results_constants.py: 3 new results constants are added, removed
unsupported constants
3. testcenter-rfc2889-rest.py: Added support to these two new
tests. Removed un-necessary synchronization of db-file. 5 new
configuration parameters are added - which are explained in (4).
4. trafficgen.rst: Configuration description for rfc2889 tests are
added. Stale information is removed.
5. testcenter.py: Support for two new tests are added. Separate
functions for results analysis and parameter settings are added.
6. traffic_controller_rfc2889.py: Calls to functions in testcenter.py,
based on the traffic_type, are added.
Removed trailing whitespaces from trafficgen.rst
JIRA: VSPERF-395
Change-Id: Ie6ca87519b7736e7410d7f0e60904579934af24a
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
VSPERF with DPDK 16.04 and 16.07 did not work on Fedora 20-22.
Installtion scripts for F20-F22 were deleted. VSPERF supports
F24 and F25.
JIRA: VSPERF-475
Change-Id: I3ce62b8883844cbcaab5b75fb9374068f9fced16
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
This patch fixes the setting of the packet fields generated by IXIA.
So that packets will be created with the values we pass, eg UDP
source port, UDP dest port, MAC source address.
JIRA: VSPERF-477
Change-Id: I15371b9f4e5fe60f738fc0e836ec7abc4f2a3938
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik martinx.klozik@intel.com
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds installer script for Fedora 25. Kernel version on Fedora 25
requires DPDK 16.11 and newer. VSPERF user must use DPDK and OVS
versions, which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: Icb86ea7655e95df57a8052e4a8523348a0c75dc0
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
List of commiters was updated and name of IRC channel added.
Change-Id: Ib12cc5fd9991f5918be06e0bccf5ef09dcff5628
Signed-off-by: Trevor Cooper <trevor.cooper@intel.com>
|
|
|
|
Adds installer script for Fedora 24. Kernel version on Fedora 24
requires DPDK 16.11 and newer. VSPERF user must ensure, that used DPDK
and OVS version which are compatible with installed kernel.
Adds new folder for current distribution with installation scripts.
JIRA: VSPERF-453
Change-Id: I08846d6e51faa578ea9305173174bfc49b77018a
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Modifies RTE_TARGET in conf/10_custom.conf which overwrites
default value in 02_vswitch.conf file.
JIRA: VSPERF-359
Change-Id: I83561d94543a6543764cd76eb4376ccdc091a4cd
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Documentation was updated as follows:
* description of vsperf downloading was added
* VNF section was updated
* additions to installation and virtualnev related parts
* file permissions of all documentaton files
was unified on 644
* README.md was updated with links to doc files
and online docs
* 3rd_party/readme was renamed and updated to follow
markdown syntax
JIRA: VSPERF-441
Change-Id: I648c6a8f0bb283bbc0875fd6fecd2539ca0c9056
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
|
|
|
|
|
|
|
|
New section specific to upgrade was added into documentation.
Description of configuration changes beetween Colorado and
Danube releases is discussed in detail.
JIRA: VSPERF-269
Change-Id: Ibbd1bb447e5d85c6b269ad26e10ff5d646a2bfbe
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
|
|
Adds a configurable learning preemptive option when running
xena continuous traffic tests. This resolves a missing packet
or two when running OVS tests at flow rates that should not
drop packets.
JIRA: VSPERF-473
Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Second patch to help improve Xena continuous traffic accuracy.
Increases delay before gathering statistics to allow packets in
flight to be received. Changes bps and fps to be calculated
based on total bytes and packets received versus capturing the
data while port is transmitting from active statistics.
Sets time limit on ports based on duration.
JIRA: VSPerf-423
Change-Id: I574819694d3141edb539de64bc16dcd6c6fcf489
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Removes un-needed code to set multi-queue option on vhostuser ports.
JIRA: VSPerf-471
Change-Id: I9f58e53d9a9bb62ef5ed441a7b4b1dea37a2f557
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Adds installer script for CentOS 7.3. Modifications are
based on installation script for RHEL7.3.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream vanilla OVS from building due to kernel
incompatibilities.
JIRA: VSPERF-452
Change-Id: Iaf05de0cf2ad7f5636d9474f351d3c7d193123cf
Signed-off-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
|
|
Adds section about mergable buffers option to testusage doc.
Also adds drive boot type info into gotchas section of
testusage doc.
JIRA: VSPERF-459
Change-Id: I159273502663dd29f4847b0737535009a42e430d
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Ixia generator related documenation was reviewed
and updated. Links to the chapters specific to
supported traffic generators were created.
JIRA: VSPERF-454
Change-Id: I3a19b054002ac8be3ed3115bc21986b3ca4ea187
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
In case of Dummy traffic generator, the test results
can be pre-configured. Configuration and examples
were described in trafficgen related chapter.
JIRA: VSPERF-458
Change-Id: I6179e98f3999e5b2df2ad4080582302bf4177cda
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
A recent patch introduced a bug where SR-IOV would use code designed
for use with testpmd_pvp scenarios. This is because this scenario
also calls for the vswitch=none flag. This patch resolves this issue
to stop the vdev devices from being added when the vnf is specified
as QemuPciPassthrough.
JIRA: VSPERF-460
Change-Id: Ie4522b046982ec5554c3deb6a507d86ca9798124
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Update NEWS with details about vsperf changes implemented
during Danube release.
JIRA: VSPERF-440
Change-Id: I3ebb010ef2a86806084c856257a6195b425b98a6
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
|
|
Requires DPDK 16.11 or greater to support vdev flags.
Initial support for TestPMD to support guests.
Allows vsperf to execute TestPMD as a switch for pvp
test scenarios.
Can be increased in functionality later to support
multiple guest configs.
JIRA: VSPERF-406
Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Links to the default test parameters were fixed.
JIRA: VSPERF-442
Change-Id: I775d5598799050fe44a5f0fc23a28716e24c2c76
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
Update to use options:dpdk-devargs coming from the Arbitray Port Naming feature
lately upstreamed in Ovs-DPDK project.
See Commit ID: 55e075e65ef9ecbd70e5e0fada2704c3d73724d8.
By this new param you can explicitly select a PCI slot for a dpdk port.
JIRA: VSPERF-449
Change-Id: Id6028cc4efbaf228a99c6f0a346a8e96a82e43a6
Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik martinx.klozik@intel.com
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Adds installer scripts for RHEL 7.3 OS.
Modified dpdk makefile to allow upstream dpdk to build.
Prevents upstream OVS from building due to kernel incompatibilities.
Provides instructions on setting up RHEL 7.3 for usage with binary
OVS packages when testing with OVS Vanilla.
Tested under RHEL 7.3
JIRA: VSPerf-322
Change-Id: If294d465f28f60a1c514a7b661ce4696ac3b5b73
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
|
|
If the downloading of results-database file fails, the CSV file and
corresponding results are not generated - eventhough the test was
successful.
This small patch handles such cases.
Updated the logging to be more explicit.
JIRA: VSPERF-435
Change-Id: I14bf519fbca2ea362777e29920bc1759494965e0
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
Usage of ethernet type for IPv4 was harmonized, to use
0x0800 at all places. Together with this fix a bug during
VNF cleanup was removed - VNF started by TestSteps are
tested for validity before the call of their stop() method.
It avoid vsperf crash in case, that VNF was not properly
started.
JIRA: VSPERF-436
Change-Id: Ic1a36919f5c9d707aa0aad64b5d96a1214c56cb3
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
|
|
|
|
Update of the rest of old traffic type names.
JIRA: VSPERF-420
Change-Id: Icf4bab7afad09f9b48ee25b9ff020c83cf2e02bd
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
Installation scripts were updated to support Ubuntu 16.04 LTS
and Ubuntu 16.10. Ubuntu 16.10 uses kernel 4.8, which is supported
since DPDK 16.11. It is up to the vsperf user to use DPDK and OVS
versions compatible with active Linux kernel.
JIRA: VSPERF-408
Change-Id: Ifb71de72cf6d4f9d6e2319cb5c1d7d5dcbe5314f
Signed-off-by: Goldammer, MartinX <martinx.goldammer@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
|
|
Following changes are added following first review
1. Descriptions in integration/01_testcases.conf
2. Comment in conf/01_testcases.conf
3. Checking all cases of traffic types in traffic_controller_rfc2544.py
4. Removing whitespaces
5. Missing changes (throughput->rfc2544_throughput)
6. Syntax error in core/traffic_controller_rfc2544.py
Currently the traffic-type values that are provided as part of the
test case definition needs some fix to support additional traffic
- apart from rfc2544. The Current and the proposed changed is summarized
in the below table:
|--------------------------------------------------------------------|
| Parameter | Existing traffic_type value | Changed to |
----------------------------------------------------------------------
| Throughput | rfc2544 OR throughput | rfc2544_throughput |
----------------------------------------------------------------------
| Back2Back | back2back | rfc2544_back2back |
----------------------------------------------------------------------
| Continuous | continuous | rfc2544_continuous |
----------------------------------------------------------------------
JIRA: VSPERF-420
Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445
Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
|
|
|
|
|
|
|
|
Fixes broken link to download python33 rpm scl installer.
Replaces Centos with software collections recommended method
to install Python33.
Adds temporary repo for Rhel7.2 to install python33.
Verified on Centos7.2 and Rhel7.2.
JIRA: VSPerf-429
Change-Id: Id86748e898f1d81011d19024d9ff2c0e9a47479f
Signed-off-by: Christian Trautman <ctrautma@redhat.com>
|
|
Need to make VSPERF's MoonGen codebase in parity with master emmerich
MoonGen branch.
JIRA: VSPERF-400
Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0
Signed-off-by: bmichalo <bmichalo@redhat.com>
|
|
Vswitchperf specific class in yardstick was updated to reflect
new functionality of --test-params. These changes have impact
on vsperf documentation and yardstick samples.
As part of this fix following changes were made:
* trafficgen mode can be executed with default configuration
* yardstick specific TC samples were updated
* dummy traffic generator was enhanced to support back2back
* dummy traffic generator was enhanced to accept traffic
results from configuration
JIRA: VSPERF-422
JIRA: VSPERF-205
Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|