aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-01-24Merge "dpdk_vhostuser_mq_fix: Fixes erroneous error message with MQ and dpdk"Martin Klozik1-5/+0
2017-01-24Merge "xena_cont_accuracy_fix: Xena continuous traffic accuracy fixes"Martin Klozik1-7/+11
2017-01-24Merge "xena_cont_learning: Adds learning preemption to continuous traffic"Martin Klozik5-0/+41
2017-01-24docs: Upgrade instructionsMartin Klozik2-0/+190
New section specific to upgrade was added into documentation. Description of configuration changes beetween Colorado and Danube releases is discussed in detail. JIRA: VSPERF-269 Change-Id: Ibbd1bb447e5d85c6b269ad26e10ff5d646a2bfbe Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
2017-01-23xena_cont_learning: Adds learning preemption to continuous trafficChristian Trautman5-0/+41
Adds a configurable learning preemptive option when running xena continuous traffic tests. This resolves a missing packet or two when running OVS tests at flow rates that should not drop packets. JIRA: VSPERF-473 Change-Id: I056578ed9c9181287d97aea55a002f09aac14e81 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-23xena_cont_accuracy_fix: Xena continuous traffic accuracy fixesChristian Trautman1-7/+11
Second patch to help improve Xena continuous traffic accuracy. Increases delay before gathering statistics to allow packets in flight to be received. Changes bps and fps to be calculated based on total bytes and packets received versus capturing the data while port is transmitting from active statistics. Sets time limit on ports based on duration. JIRA: VSPerf-423 Change-Id: I574819694d3141edb539de64bc16dcd6c6fcf489 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-23dpdk_vhostuser_mq_fix: Fixes erroneous error message with MQ and dpdkChristian Trautman1-5/+0
Removes un-needed code to set multi-queue option on vhostuser ports. JIRA: VSPerf-471 Change-Id: I9f58e53d9a9bb62ef5ed441a7b4b1dea37a2f557 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-19Merge "testpmd_pvp_fix: Fix SR-IOV QemuPciPassthrough mode to not use vdev"Martin Klozik1-3/+5
2017-01-18Merge "mrg_buff_doc: Add documentation on mergable buffer option"Martin Klozik1-0/+38
2017-01-18mrg_buff_doc: Add documentation on mergable buffer optionChristian Trautman1-0/+38
Adds section about mergable buffers option to testusage doc. Also adds drive boot type info into gotchas section of testusage doc. JIRA: VSPERF-459 Change-Id: I159273502663dd29f4847b0737535009a42e430d Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-18docs: Ixia docs updateMartin Klozik1-36/+46
Ixia generator related documenation was reviewed and updated. Links to the chapters specific to supported traffic generators were created. JIRA: VSPERF-454 Change-Id: I3a19b054002ac8be3ed3115bc21986b3ca4ea187 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-18docs: Dummy pre-configured resultsMartin Klozik1-15/+84
In case of Dummy traffic generator, the test results can be pre-configured. Configuration and examples were described in trafficgen related chapter. JIRA: VSPERF-458 Change-Id: I6179e98f3999e5b2df2ad4080582302bf4177cda Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-18testpmd_pvp_fix: Fix SR-IOV QemuPciPassthrough mode to not use vdevChristian Trautman1-3/+5
A recent patch introduced a bug where SR-IOV would use code designed for use with testpmd_pvp scenarios. This is because this scenario also calls for the vswitch=none flag. This patch resolves this issue to stop the vdev devices from being added when the vnf is specified as QemuPciPassthrough. JIRA: VSPERF-460 Change-Id: Ie4522b046982ec5554c3deb6a507d86ca9798124 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-17Merge "traffic: Configurable traffic details"Martin Klozik25-413/+577
2017-01-16traffic: Configurable traffic detailsMartin Klozik25-413/+577
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2017-01-16docs: Update NEWS sectionMartin Klozik1-6/+50
Update NEWS with details about vsperf changes implemented during Danube release. JIRA: VSPERF-440 Change-Id: I3ebb010ef2a86806084c856257a6195b425b98a6 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-16Merge "testpmd_pvp: Adds pkt_fwd to allow pvp topology testing"Martin Klozik7-5/+102
2017-01-16Merge "docs: Fix links to default test parameters"Martin Klozik1-20/+28
2017-01-13testpmd_pvp: Adds pkt_fwd to allow pvp topology testingChristian Trautman7-5/+102
Requires DPDK 16.11 or greater to support vdev flags. Initial support for TestPMD to support guests. Allows vsperf to execute TestPMD as a switch for pvp test scenarios. Can be increased in functionality later to support multiple guest configs. JIRA: VSPERF-406 Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-12docs: Fix links to default test parametersMartin Klozik1-20/+28
Links to the default test parameters were fixed. JIRA: VSPERF-442 Change-Id: I775d5598799050fe44a5f0fc23a28716e24c2c76 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2017-01-11ovs-dpdk port setup: specify PCI slot.Antonio_Fischetti1-1/+5
Update to use options:dpdk-devargs coming from the Arbitray Port Naming feature lately upstreamed in Ovs-DPDK project. See Commit ID: 55e075e65ef9ecbd70e5e0fada2704c3d73724d8. By this new param you can explicitly select a PCI slot for a dpdk port. JIRA: VSPERF-449 Change-Id: Id6028cc4efbaf228a99c6f0a346a8e96a82e43a6 Signed-off-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik martinx.klozik@intel.com Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: <bmichalo@redhat.com> Reviewed-by: <sridhar.rao@spirent.com>
2017-01-10Merge "rhel73_install: Provide installer script for RHEL 7.3"Martin Klozik6-12/+180
2017-01-06rhel73_install: Provide installer script for RHEL 7.3Christian Trautman6-12/+180
Adds installer scripts for RHEL 7.3 OS. Modified dpdk makefile to allow upstream dpdk to build. Prevents upstream OVS from building due to kernel incompatibilities. Provides instructions on setting up RHEL 7.3 for usage with binary OVS packages when testing with OVS Vanilla. Tested under RHEL 7.3 JIRA: VSPerf-322 Change-Id: If294d465f28f60a1c514a7b661ce4696ac3b5b73 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2017-01-05Merge "pkt_gen: STC - Handle Results DB file synchronization failures."Martin Klozik2-4/+14
2017-01-05pkt_gen: STC - Handle Results DB file synchronization failures.Sridhar K. N. Rao2-4/+14
If the downloading of results-database file fails, the CSV file and corresponding results are not generated - eventhough the test was successful. This small patch handles such cases. Updated the logging to be more explicit. JIRA: VSPERF-435 Change-Id: I14bf519fbca2ea362777e29920bc1759494965e0 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2017-01-04bugfix: Ethernet type and vnf stop fixesMartin Klozik4-7/+8
Usage of ethernet type for IPv4 was harmonized, to use 0x0800 at all places. Together with this fix a bug during VNF cleanup was removed - VNF started by TestSteps are tested for validity before the call of their stop() method. It avoid vsperf crash in case, that VNF was not properly started. JIRA: VSPERF-436 Change-Id: Ic1a36919f5c9d707aa0aad64b5d96a1214c56cb3 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
2016-12-19Merge "install: Ubuntu 16.xx support"Martin Klozik3-0/+4
2016-12-14conf: traffic type naming step2Martin Klozik7-8/+9
Update of the rest of old traffic type names. JIRA: VSPERF-420 Change-Id: Icf4bab7afad09f9b48ee25b9ff020c83cf2e02bd Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-12-13install: Ubuntu 16.xx supportMartin Klozik3-0/+4
Installation scripts were updated to support Ubuntu 16.04 LTS and Ubuntu 16.10. Ubuntu 16.10 uses kernel 4.8, which is supported since DPDK 16.11. It is up to the vsperf user to use DPDK and OVS versions compatible with active Linux kernel. JIRA: VSPERF-408 Change-Id: Ifb71de72cf6d4f9d6e2319cb5c1d7d5dcbe5314f Signed-off-by: Goldammer, MartinX <martinx.goldammer@intel.com> Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-12-07Merge "conf:Traffic-type naming convention and consistency"Martin Klozik7-70/+79
2016-12-07conf:Traffic-type naming convention and consistencySridhar K. N. Rao7-70/+79
Following changes are added following first review 1. Descriptions in integration/01_testcases.conf 2. Comment in conf/01_testcases.conf 3. Checking all cases of traffic types in traffic_controller_rfc2544.py 4. Removing whitespaces 5. Missing changes (throughput->rfc2544_throughput) 6. Syntax error in core/traffic_controller_rfc2544.py Currently the traffic-type values that are provided as part of the test case definition needs some fix to support additional traffic - apart from rfc2544. The Current and the proposed changed is summarized in the below table: |--------------------------------------------------------------------| | Parameter | Existing traffic_type value | Changed to | ---------------------------------------------------------------------- | Throughput | rfc2544 OR throughput | rfc2544_throughput | ---------------------------------------------------------------------- | Back2Back | back2back | rfc2544_back2back | ---------------------------------------------------------------------- | Continuous | continuous | rfc2544_continuous | ---------------------------------------------------------------------- JIRA: VSPERF-420 Change-Id: I22bd897f6389d2b568a6a3735c67f0003e813445 Signed-off-by: Sridhar K. N. Rao <sridhar.rao@spirent.com>
2016-12-06Merge "scl_fix: Fix broken link to install python33"Christian Trautman2-5/+17
2016-12-01Merge "pkt_gen: MoonGen updated to keep parity with master"Martin Klozik2-12/+11
2016-12-01Merge "yardstick: CLI params support for yardstick TCs"Martin Klozik9-157/+358
2016-11-30scl_fix: Fix broken link to install python33Christian Trautman2-5/+17
Fixes broken link to download python33 rpm scl installer. Replaces Centos with software collections recommended method to install Python33. Adds temporary repo for Rhel7.2 to install python33. Verified on Centos7.2 and Rhel7.2. JIRA: VSPerf-429 Change-Id: Id86748e898f1d81011d19024d9ff2c0e9a47479f Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-11-30pkt_gen: MoonGen updated to keep parity with masterbmichalo2-12/+11
Need to make VSPERF's MoonGen codebase in parity with master emmerich MoonGen branch. JIRA: VSPERF-400 Change-Id: I8c50ed89c9e7b0080497107c1af826f49c1e82f0 Signed-off-by: bmichalo <bmichalo@redhat.com>
2016-11-30yardstick: CLI params support for yardstick TCsMartin Klozik9-157/+358
Vswitchperf specific class in yardstick was updated to reflect new functionality of --test-params. These changes have impact on vsperf documentation and yardstick samples. As part of this fix following changes were made: * trafficgen mode can be executed with default configuration * yardstick specific TC samples were updated * dummy traffic generator was enhanced to support back2back * dummy traffic generator was enhanced to accept traffic results from configuration JIRA: VSPERF-422 JIRA: VSPERF-205 Change-Id: Ibeaa6ef46bde453e3ca5dee6e4568fc8c3853521 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
2016-11-24ci: Configure hugepages directly from CI scriptMartin Klozik1-3/+21
In case of CI it is better to enforce hugepages allocation. Just for case, that hugepages were left enabled by last vsperf execution or by another job. JIRA: VSPERF-391 Change-Id: I0531b2a8a1e5024d73c227377dd9c487d6931c35 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
2016-11-23Merge "Xena_cont_accuracy: Modify continuous from duration to packet limit"Martin Klozik2-4/+46
2016-11-23Merge "ci: Use HTML report instead of PDF"Martin Klozik1-3/+3
2016-11-23Merge "Rebase to fuel 10.0 for fuel@opnfv D release"Maryam Tahhan1-3/+3
2016-11-23Merge "Rhel_scl_python: Modify python build in place to scl usage"Martin Klozik3-32/+19
2016-11-22ci: Use HTML report instead of PDFMartin Klozik1-3/+3
After the switch to opnfvdocs script for documentation build, the pdf version of documentation is not generated. HTML report should be stored inside artifactory instead. JIRA: VSPERF-324 Change-Id: I42f918721264959ba7c94223204d83ce1fe8ad60 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: Otto Sabart <osabart@redhat.com>
2016-11-22Merge "report: [fix] remove upper border of a process table"Martin Klozik1-1/+0
2016-11-21Xena_cont_accuracy: Modify continuous from duration to packet limitChristian Trautman2-4/+46
First of a few patches planned to help increase Xena continuous traffic accuracy. Modifies port limits to packet calculated limits versus time based limits which can be wildly inaccurate. Also modifies some port settings to be more inline with how rfc2544 settings are applied on Xena. Increased time delay by one second to allow packets to finish transmitting before stat collection occurs. JIRA: VSPerf-423 Change-Id: I214b13d743a84a0733e885ccfc5bdd57812d7104 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-11-21ci: Decrease hugepages size for VERIFY&MERGE jobsMartin Klozik5-20/+24
VSPERF by default requires allocation of hugepages with total size of 10GB. However for MERGE and VERIFY jobs less memory is required and default size of 10GB can cause issues. Thus amount of memory was limited and other minor enhancements were introduced: * sysstat system package is installed at nodes running VERIFY and MERGE jobs * WHITELIST_NICS was set to empty list by default to avoid automatic bind of NICs to DPDK. Old default value could cut off network connection to DUT. * imports were fixed at both integration.py and testcase.py JIRA: VSPERF-391 Change-Id: Ic07d68f4591ae697c1b8edeae6c0cffe47c065ce Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
2016-11-18Rhel_scl_python: Modify python build in place to scl usageChristian Trautman3-32/+19
Previously Rhel install script would build python 3 in place using downloaded bits. It was suggested to change this to use scl method instead. This patch modifies the build in place to use scl method as per Centos scripts. JIRA: VSPERF-258 Change-Id: I5b6d7b8fd7f96a315d04e1ccdfd381908e0d1ad0 Signed-off-by: Christian Trautman <ctrautma@redhat.com>
2016-11-11INFO: modified committer listMaryam Tahhan1-1/+0
Change-Id: I709dd316b1c53fa632c1a6ff192b13d1756669d0 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-11-11Merge "cli: Modify configuration via CLI"Martin Klozik23-170/+257
2016-11-09cli: Modify configuration via CLIMartin Klozik23-170/+257
In the past, only a few configuration parameters could be modified via --test-params CLI argument and it was not easy to find out their complete list. This patch adds support for generic modification of any configuration parameter via CLI argument --test-params or by "Parameters" section of testcase definition. Thus it is possible to customize a vsperf configuration environment per testcase or for each vsperf execution. Old CLI parameters duration, pkt_sizes, rfc2544_tests and rfc2889_trials were renamed to TRAFFICGEN_DURATION, TRAFFICGEN_PKT_SIZES, TRAFFICGEN_RFC2544_TESTS and TRAFFICGEN_RFC2889_TRIALS to be consistent with other configuration parameters. JIRA: VSPERF-375 Change-Id: I50a1f4ff7250d754aa8af0295a9c7c1be8151175 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>