aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-01-19ci: show TC results inside Jenkins job console outputMartin Klozik1-0/+12
It is required to show detailed result figures together with OK/FAILED status. CI script has been modified to show formatted results from test report MD files. Change-Id: I9e3724c5aac517dc493f0cf57fc8292434c0bfe8 JIRA: VSPERF-184 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-13test_spec: LTD: RFC.WorstN-BestN testMiroslav Miklus1-0/+91
- Test ID: LTD.Throughput.RFC2544.WorstN-BestN JIRA: VSPERF-123 Change-Id: Ief04d8c415a77f4a9b77ba0d2a52653376b37ff1 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-13test_spec: LTD: UpdatesMiroslav Miklus1-13/+20
- document updates JIRA: VSPERF-123 Change-Id: Ic156bb43dbb04e8895ac3e194c0f485517af93ef Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-12vswitches: Remove datapath after stopping OVSDino Simeon Madarang3-1/+76
Remove the datapath that OVS creates, ovs-system, (can be viewed by ip link) after running OVS vanilla tests. Change-Id: I087c7b3f5afa546258227939ffcb38f0192f0d98 JIRA: VSPERF-175 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2016-01-11CI: terminate hanging vsperf before its executionMartin Klozik1-0/+27
In case that vsperf terminates unexpectedly, then vsperf itself or any of executed applications might remain active. It is essential to terminate any hanging instance of vsperf, ovs, qemu, etc. before re-execution of vsperf itself. Otherwise vsperf will fail again. Change-Id: Idd65288a5171d19fcbfb907a156347eb4b645a88 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2016-01-08update docs build dir names in .gitignoreRyota MIBU1-1/+2
Change-Id: Ie153c504b390dc68911a8f1d9a82c7a2e1901ec4 Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
2016-01-07src: fix ovs and qemu versionMaryam Tahhan1-2/+2
Qemu 2.2 doesn't compile on Fedora 22 and ovs was set to track the head of master. We need to fix this for OPNFV builds. Change-Id: I05823f96b9347ac322831a0dd3f3d63dcf726beb Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2016-01-06CI: bugfix of build-vsperf.sh scriptMartin Klozik1-1/+1
Vanilla version of OVS was enforced also for set of test, which should be executed with DPDK version of OVS. Value of --vswitch parameter was fixed. Change-Id: I3c486454ff5093436ddc64847e29e55e23764a92 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-05conf: modify core mask formatCiara Loftus1-2/+3
The pmd-cpu-core mask flag does not accept a hexmask with a leading '0x'. Remove these characters from the VSWITCH_PMD_CPU_MASK variable. JIRA: VSPERF-139 Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-05system: add build support for Fedora 20Mark Kavanagh2-0/+95
The most recent version of virtualenv available through installer tools on Fedora 20 is 3.3; existing build scripts for Fedora 21 and 22 reference version 3.4. Add relevant scripts to enable installation and build on F20. Change-Id: I87324fe55df0af687b616fd2e3f6419046a23e46 Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04docs: fix all/ index.rst links.Maryam Tahhan1-4/+4
JIRA: VSPERF-160 Change-Id: I5722fd8340e009cb1885981e6e40468df4d9216c Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2016-01-04docs: update release docs after reviewingMaryam Tahhan1-17/+5
Review and update release documentation for Release B. JIRA: VSPERF-160 Change-Id: I43c85639ed010f950dc3c85eecfe2ff47b65214d Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04Code checkerMartin Klozik1-0/+143
Initial implementation of code checker script. It uses pylint with vsperf specific pylintrc file to check code syntax, design, etc. Check can be performed for all files, specified directories or for modified files only. It will skip files defined by EXCLUDE_MODULES in conf/00_common.conf file. Details about script usage can be obtained by ./check -h. Change-Id: I7d894a2c4db92b7b9d4d4312e6f56bc48c8d5dbf JIRA: VSPERF-114 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04CI: update build-vsperf.sh scriptMartin Klozik1-1/+165
Script for execution of "daily" vswitchperf job has been updated. It is prepared also for execution of "verify" and "merge" jobs after their content will be defined. Change-Id: I64aa4a2aa23c93f1847cc4528fbdee6f71a62290 JIRA: VSPERF-155 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2016-01-04bugfix: Vanilla OVS kernel module broken dependenciesMartin Klozik1-1/+1
Vsperf doesn't install OVS kernel module into standard directory, to keep host OS untouched. Thus kernel module must be inserted by insmod and module dependencies solved manually. List of kernel modules was updated to load all dependencies for recent OVS version. Change-Id: Id147615ca95cfbde26d1dc8d6c9801f7bb3b5d36 JIRA: VSPERF-161 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-23vnf: support of vloop_vnf VMMartin Klozik3-41/+65
Additional modifications are required to support vloop_vnf as a master VM image for PVP and PVVP deployments. Firewall is disabled directly by call of iptables to avoid dependency on distribution specific firewall handling. Default configuration values in 04_vnf.conf were set according to vloop_vnf to make its usage easy. Values are generic enough to work well also with other images. Parameters VANILLA_NICx_NAME and vanilla_nicx_name were renamed to GUEST_NICx_NAME and guest_nicx_name respectively, because they are used for all vswitch versions. Functionality of CLI options was fixed. Default values of GUEST_NICx_NAME were changed to work with vloop_vnf image. Bug with modification of TRAFFIC_DEFAULTS values has been fixed. Deep copy is used and l2 and l3 dictionaries are correctly updated to avoid issues. Qemu disc emulation has been set to SCSI again to avoid error messages related to non-functional DMA in syslog. Appropriate kernel modules were added into vloop_vnf to support scsi disk emulation during boot. Change-Id: I5901f454861f99d21cca03030d6d5468ab71a8af JIRA: VSPERF-133 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-23docs: update design docs after reviewingMaryam Tahhan1-13/+13
Review and update design documentation for Release B. JIRA: VSPERF-160 Change-Id: I2c2167b5ac9161e30aacd277060da22a559dd0c2 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-23docs: update userguides after reviewingMaryam Tahhan3-105/+136
Review and update userguides for Release B. JIRA: VSPERF-160 Change-Id: I54c4dd37fa5951cab9d0e17bb2f3a4d273741cb0 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-21docs: updates and move traffic gens to separate docMaryam Tahhan22-404/+754
Move the traffic gen instructions to a separate user guide and add information on usage of the Dummy traffic generator. Update docs to fix PDF build failure and do general clean-up. Removed the numbering from the LTD and added the numbered directive to automate numbering for sections and headers. Add comment anchors that reflect the section numbers. Change-Id: I984ca38456a891c439697ebc1da041bc1d828a15 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-16Back2Back: update default paramsMaryam Tahhan4-10/+17
Update the default duration of a back to back test to be 2 seconds which is the minimum recommended by RFC2544, and update the Trials to be 50, which is also the default value specified by the RFC. This patch also fixes the tcl script to allow for the minimum framesize to be sent from the traffic gen. JIRA: Change-Id: I801196c1998ec2bffbeab69a3a290d6ef6feb1c3 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
2015-12-15CI: Create simple Hello world build-vsperf.shRadek Zetik1-0/+3
Create a ci directory and create a simple "echo Hello world" in a shell script called build-vsperf.sh. The file will be used as a placeholder for OPNFV Jenkins vsperf-daily-master job. JIRA: VSPERF-157 Change-Id: Ibe5ca31f8776fcf4ba6b1e353383a03566617350 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-15INFO: remove inactive committersMaryam Tahhan1-5/+0
Remove inactive committers who cannot be contacted or who have stepped down from the committer role. Change-Id: Ied02443b571d0dc70135329aed65af2acb9fe426 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-14Results: Integrate with opnfv_test_dashboardRadek Zetik4-3/+28
The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name: example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" Additionally, there are two parameters with default values: OPNFV_URL = "http://213.77.62.197" Defines address of opnfv releng database server PACKAGE_LIST = "src/package-list.mk" OVS and DPDK tags are read from this file and values are used for creation of 'version' filed. The patch requires 'requests' module. The requirements.txt is updated. JIRA: VSPERF-112 Change-Id: I49f6f5058b1bce8a257669efa8229ff31879481d Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-14bugfix: Fix failure caused by unset localeMartin Klozik7-14/+40
In case, that VSPERF detects missing locale settings, it will set language and encodding settings to default values specified by configuration parameter DEFAULT_LOCALE. Localized external commands with output parsed by VSPERF are executed with modified locale to ensure correct VSPERF function. Locale settings for such commands is specified by configuration parameter DEFAULT_CMD_LOCALE. Change-Id: If5c15115b778ce90046e390f10438b780f82695b JIRA: VSPERF-132 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-12-14bugfix: Support paths with user's home shortcutMartin Klozik3-5/+6
VSPERF will explicitly expand any '~' to the absolute path to the user's home directory before call of subsystem.Popen method. Only calls, which process configuration values are modified. Change-Id: Ibd9399ae84bf4698c86bf8eff97ca6ce785fb3fb JIRA: VSPERF-45 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-14Fix: OS name detection error by build scriptsAbdul Halim1-3/+6
There is a problem detecting OS specific scripts dir if NAME variable in /etc/os-release contains a multi-word string (e.g NAME="CentOS Linux"). To fix this we get first part of the NAME string (i.e "CentOS") for simplicity and look for version specific scripts dir within that. Change-Id: Ic840788875e9b486b20608a9b9e523cbd4530e31 Signed-off-by: Abdul Halim <abdul.halim@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <Brian.Castelli@spirent.com>
2015-12-11test_spec: LTD: new topologyMiroslav Miklus1-1/+47
- Physical port → VNF → vSwitch → VNF → physical port updated topology with pNIC-VF this provides us ability to fill up the box with multiple VNFs JIRA: VSPERF-123 Change-Id: Iea991b2cd2973c07ecbc300bb6d413a182cae992 Signed-off-by: Miroslav Miklus <mmiklus@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
2015-12-11updates to use new doc toolchainRyota MIBU3-27/+5
Change-Id: I5009a996b2e581638f159ed37a1c56ac53c0c71f Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
2015-12-09testcase: scalability testcase enhancementsMartin Klozik6-36/+83
Streams used by scalability testcases can be simulated at different network layers by modification of destination MAC address (L2), destination IP address (L3) or destination UDP port (L4). It is possible to define number and type of the streams by testcase definition by options "MultiStream" and "Stream Type" or by CLI parameters "multistream" and "stream_type". CLI options override testcase definition. Number of streams, their types, used transport protocol and indication of pre-installed flows are written to both result CSV file and MD file with test report. Default transport protocol was changed to UDP because IxNetwork configuration script doesn't support TCP yet. Change-Id: I1ff9ab7756d38f65b1a7730397507c5a5ff5a3d1 JIRA: VSPERF-81 JIRA: VSPERF-82 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-08pkt_gen: rename throughput_tx_* to tx_rate_*Maryam Tahhan5-21/+21
Change throughput_tx_* references to tx_rate_* so the results won't be confusing as part of the opnfv test dashboard when they become publicly available. Change-Id: Ie8cfae99a75497f15eb09d097c72c8a35df3b5f9 JIRA: VSPERF-135 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Ian Stokes <ian.stokes@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-08Results: Integrate with opnfv_test_dashboardRadek Zetik5-0/+148
All the test projects generate results in different format. The goal of a testing dashboard is to provide a consistent view of the different tests from the different projects. We need to enable the data collection for VSPERF, in other words VSPERF pushes data using a REST API. The feature is enabled by --opnfvpod parameter on vsperf command line. The value of the parameter sets POD name. Example: --opnfvpod <pod_name> or --opnfvpod=<pod_name> You need to specify installer name. It can be set in conf-file default value: OPNFV_INSTALLER = "Fuel" JIRA: VSPERF-112 Change-Id: I37255414eebcc2ff0c12109c508dcd984663a830 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-12-02Add some error checking to F21 installBilly O'Mahony3-9/+11
Make the install fail fast and obviously on error rather than continuing on. This can be used as a template for adding error checking on the other systems. JIRA: VSPERF-141 Change-Id: I1892db661a56ab2012e26c6720e0851fabbb51d9 Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-12-02vnfs: configurable loopback application support inside VMMartin Klozik11-204/+269
For PVP and PVVP deployments, traffic inside virtual machines must be forwarded between its interfaces. There are several forwarding options supported by VSPERF, including DPDK testpmd, Huawei l2fwd kernel module and linux bridge. Another option is, that VM image has built in forwarding functionality and vsperf doesn't configure it itself. User can select VM loopback application by configuration option GUEST_LOOPBACK (per VM) or by SCALAR cli option guest_loopback (global settings). Selected guest loopback application(s) will be written into test results CSV file and test report MD file. Default wildcarded guest login prompt was added. Guest startup guarding timer can be configured. Path to OVS kernel module has been fixed. Change-Id: If738da1ea09112f9cf2267afcbc99a6797f3a03a JIRA: VSPERF-130 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-12-02pkt_gen: add duration to all send functionsMaryam Tahhan8-42/+41
Allow a configurable duration for all send functions. JIRA: VSPERF-125 Change-Id: I7c6f5d136a7d7100e3990f7fdc00121b07081a80 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2015-11-26docs: update installation guide and gsg.Maryam Tahhan2-11/+73
Update installation guide and gsg to include latest updates to vsperf build and installation. JIRA: VSPERF-127 Change-Id: I773ea240eb90e191f4f53ed977651056817413f1 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2015-11-26Adding install scripts for Ubuntu14.04Abdul Halim4-2/+133
System build scripts for Ubuntu14.04 are added. DPDK mkdir hugepage fails to create /dev/hugepages with permission error. Workaround for that is added so that /dev/hugepages dir is created when OS specific scripts is run with sudo privilege. Also adding missing packages kernel-modules-extra, pixman-devel and openssl-devel for Fedora systems. JIRA: VSPERF-128 Signed-off-by: Abdul Halim <abdul.halim@intel.com> Change-Id: Ie805c094df4a3f9446b09ea2d7e4dfb2f5324544 Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com> Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-11-26doc: update template and conf filesRyota MIBU6-103/+26
JIRA: RELENG-16 Change-Id: I0aaac15c1d1a1031cbc113db594a342c60b7eb1d Signed-off-by: Ryota MIBU <r-mibu@cq.jp.nec.com>
2015-11-12Adding system build scripts for Fedora 21 and Fedora 22Abdul Halim5-13/+200
Scripts are added for Fedora 21 and 22 to install system requirements and python packages on these systems. Also modified root build_base_machine.sh so that it can handle directory structures for version specific scripts if available. JIRA: VSPERF-93 Change-Id: If6a311bc7bb1116979faabff5e9097e39f2f5495 Signed-off-by: Abdul Halim <abdul.halim@intel.com> Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
2015-11-11pkt_gen: update testcenter implementationMaryam Tahhan4-473/+530
Update testcenter implementation to move settings to generic settings file and change windows line endings. JIRA: VSPERF-126 Change-Id: I156005f261bc0df6c3d8009db72ba2d5991c6166 Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com>
2015-11-10Enable OVS master and DPDK 2.1Martin Klozik1-2/+2
VSPERF used old version of OVS, which has supported DPDK 2.0. With switch to DPDK 2.1, VSPERF can use recent OVS code again. JIRA: VSPERF-124 Change-Id: I81f6b8887d795df08a2eb8959606f2a9a277f9e6 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com>
2015-11-10conf: change default RTE_TARGETMaryam Tahhan1-1/+1
Change RTE_TARGET to build native instead of ivshmem. Change-Id: I3707d1f4bf545c4a2a35e85816f26dbd214a72de Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O'Mahony <billy.o.mahony@intel.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-11-04docs: reorganize docs for the sphinx buildRamprasad Velavarthipati14-19/+129
Reorganize docs into the appropriate folders for the new sphinx build. JIRA: VSPERF-80 Change-Id: I9dcd74e092ce52546a0986b92a1ebb2b5b7419bf Signed-off-by: Ramprasad Velavarthipati <ram.v@freescale.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Trinath Somanchi <trinath.somanchi@gmail.com>
2015-11-03bugfix of Vanilla OVS testing scenariosMartin Klozik10-71/+84
Automatic selection of OVS and DPDK directories must be performed before initialization of modules is called. Otherwise modules will use wrong values with unpredictable results. Default directory values have been changed to point to sources build by make. Clean&sweep of directory usage was performed. Configuration file for pylint has been renamed to follow pylint naming convention. Change-Id: I42c89f8890c021f0062b478a856ae0113f1245fb JIRA: VSPERF-121 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-29First phase of Spirent Traffic Gen integrationspirentbrian7-11/+732
Change-Id: Ib852c81fc8e09593411984bfb6f9bc5d5629f0c4
2015-10-29docs: fixup documentation errors and locationsMaryam Tahhan2-13/+13
Fixup the location of all rst documentation and any errors in the ltd. JIRA:VSPERF-60 Change-Id: I1472d540b1b4eca4ab038d079bfb0ef2f0c5ebcd Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com>
2015-10-29Fix Make, Make clean and when the src directories are clonedRadek Zetik8-13/+19
Update the rules for Make clean and distclean. Update make not to clone the repositories if they are already cloned, simply pull, checkout the tags and build. Changes in this patch: 1. QEMU is built just once in .../src directory. .../src_vanilla and .../src_cuse don't contain qemu anymore 2. 'make clean' deletes all built *.o files 3. 'make distclean' deletes all built and generated files (distclean is used instead of cleanse now) 4. 'make' calls 'git pull' when repository is cloned already JIRA: VSPERF-94 Change-Id: I80f9a135580b450fb4606cf947661049ff509548 Signed-off-by: Radek Zetik <radekx.zetik@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
2015-10-28Stop OVS from generating misleading add-br errorsDino Simeon Madarang4-11/+23
Create bridge and set datapath_type in 1 transaction to prevent OVS from generating misleading error messages which jenkins considers as build errors. Update vswitch interface to include optional parameters. Change-Id: I668f474ea909b284f3726807aab42d52ae2fb504 JIRA: VSPERF-122 Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
2015-10-23systems directory scripts for Centos7Martin Klozik5-68/+132
Installation scripts for Centos7 have been updated with new packages. Script will install also python3 packages and create python virtual environment. As a last step DPDK, OVS and QEMU will be compiled. So after script execution VSPERF should be ready for use. It is recommended to execute installation script from user account with password less sudo access. Otherwise python environment must be copied over from root home directory. After VSPERF generic Makefile will be created by VSPERF-114, it can be enhanced to call build script too. Change-Id: I6ff5d2660af29cf8be134a4cae3b1d7b559892fa JIRA: VSPERF-93 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Abdul Halim <abdul.halim@intel.com> Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
2015-10-23Simple performance Test for the PVP and PVVPMartin Klozik6-27/+48
Two sample contionous stream testcaes were introduced for PVP and PVVP scenarios. Required frame rate percentage can be specified either by tetcase configuration option "iLoad" or by command line option "iload". Command line option take precendece to testcase option. By default 100% linerate is used if not specified otherwise. Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b JIRA: VSPERF-95 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com>
2015-10-21Add Pylint to VSPERF commit gateMartin Klozik10-21/+412
Initial pylint config file has been created to follow current code structure and design. A few issues have been fixed, so currently 56 of 67 files have rating 10/10. There are still issues to be fixed, mainly TODOs/FIXMEs and missing impelentation of abstract class members. Change-Id: Icf5b12c2150258f8ac657f8d50b47a697d1660a0 JIRA: VSPERF-91 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com> Reviewed-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com> Reviewed-by: Gene Snider <eugene.snider@huawei.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Tv Rao <tv.rao@freescale.com> Reviewed-by: Brian Castelli <brian.castelli@spirent.com>