diff options
Diffstat (limited to 'docs')
| -rwxr-xr-x[-rw-r--r--] | docs/to-be-reorganized/vswitchperf_ltd.rst | 204 |
1 files changed, 107 insertions, 97 deletions
diff --git a/docs/to-be-reorganized/vswitchperf_ltd.rst b/docs/to-be-reorganized/vswitchperf_ltd.rst index 321ae418..4e194d0c 100644..100755 --- a/docs/to-be-reorganized/vswitchperf_ltd.rst +++ b/docs/to-be-reorganized/vswitchperf_ltd.rst @@ -150,9 +150,9 @@ switch, the tests will be broken down into the following categories: packet and frame delay for constant loads. - **Stream Performance Tests** (TCP, UDP) to measure bulk data transfer performance, i.e. how fast systems can send and receive data through - the switch. + the virtual switch. - **Request/Response Performance** Tests (TCP, UDP) the measure the - transaction rate through the switch. + transaction rate through the virtual switch. - **Packet Delay Tests** to understand latency distribution for different packet sizes and over an extended test run to uncover outliers. @@ -502,7 +502,7 @@ with non default parameters will be stated explicitly**. **Note**: For throughput tests unless stated otherwise, test configurations should ensure that traffic traverses the installed flows -through the switch, i.e. flows are installed and have an appropriate +through the virtual switch, i.e. flows are installed and have an appropriate time out that doesn't expire before packet transmission starts. 2.2.3.2 Flow Classification @@ -804,7 +804,7 @@ platform should be configured for every test after this (# of vCPUs, vNICs, Memory, affinitization…) is how it should be configured for every test that uses a VNF after this. -2.2.4 RFCs for testing switch performance +2.2.4 RFCs for testing virtual switch performance ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The starting point for defining the suite of tests for benchmarking the @@ -850,7 +850,7 @@ Types of tests are: network’s ability to support real-time applications in which a large amount of frame loss will rapidly degrade service quality. -4. Burst test assesses the buffering capability of a switch. It +4. Burst test assesses the buffering capability of a virtual switch. It measures the maximum number of frames received at full line rate before a frame is lost. In carrier Ethernet networks, this measurement validates the excess information rate (EIR) as defined in @@ -1501,90 +1501,6 @@ Test ID: LTD.Throughput.RFC2889.ForwardPressure - Physical → virtual switch → physical. -Test ID: LTD.Throughput.RFC2889.AddressCachingCapacity -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - **Title**: RFC2889 Address Caching Capacity Test - - **Prerequisite Test**: N/A - - **Priority**: - - **Description**: - - Please note this test is only applicable to switches that are capable of - MAC learning. The aim of this test is to determine the address caching - capacity of the DUT for a constant load (fixed length frames at a fixed - interval time). The selected frame sizes are those previously defined - under `Default Test Parameters <#DefaultParams>`__. - - In order to run this test the aging time, that is the maximum time the - DUT will keep a learned address in its flow table, and a set of initial - addresses, whose value should be >= 1 and <= the max number supported by - the implementation must be known. Please note that if the aging time is - configurable it must be longer than the time necessary to produce frames - from the external source at the specified rate. If the aging time is - fixed the frame rate must be brought down to a value that the external - source can produce in a time that is less than the aging time. - - Learning Frames should be sent from an external source to the DUT to - install a number of flows. The Learning Frames must have a fixed - destination address and must vary the source address of the frames. The - DUT should install flows in its flow table based on the varying source - addresses. Frames should then be transmitted from an external source at - a suitable frame rate to see if the DUT has properly learned all of the - addresses. If there is no frame loss and no flooding, the number of - addresses sent to the DUT should be increased and the test is repeated - until the max number of cached addresses supported by the DUT - determined. - - **Expected Result**: - - **Metrics collected**: - - The following are the metrics collected for this test: - - - Number of cached addresses supported by the DUT. - - CPU and memory utilization may also be collected as part of this - test, to determine the vSwitch's performance footprint on the system. - - **Deployment scenario**: - - - Physical → virtual switch → 2 x physical (one receiving, one listening). - -Test ID: LTD.Throughput.RFC2889.AddressLearningRate -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - **Title**: RFC2889 Address Learning Rate Test - - **Prerequisite Test**: LTD.Memory.RFC2889.AddressCachingCapacity - - **Priority**: - - **Description**: - - Please note this test is only applicable to switches that are capable of - MAC learning. The aim of this test is to determine the rate of address - learning of the DUT for a constant load (fixed length frames at a fixed - interval time). The selected frame sizes are those previously defined - under `Default Test Parameters <#DefaultParams>`__, traffic should be - sent with each IPv4/IPv6 address incremented by one. The rate at which - the DUT learns a new address should be measured. The maximum caching - capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken - into consideration as the maximum number of addresses for which the - learning rate can be obtained. - - **Expected Result**: It may be worthwhile to report the behaviour when - operating beyond address capacity - some DUTs may be more friendly to - new addresses than others. - - **Metrics collected**: - - The following are the metrics collected for this test: - - - The address learning rate of the DUT. - - **Deployment scenario**: - - - Physical → virtual switch → 2 x physical (one receiving, one listening). Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -1698,8 +1614,8 @@ Test ID: LTD.PacketLatency.InitialPacketProcessingLatency plus 10%. Average packet latency will be determined over 1,000,000 packets. - This test is intended only for non-learning switches; For learning - switches use RFC2889. + This test is intended only for non-learning virtual switches; For learning + virtual switches use RFC2889. For this test, only unidirectional traffic is required. @@ -1844,6 +1760,97 @@ Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability - The DUT's 0% packet loss throughput in the presence of cache sharing and memory bandwidth between processes. +2.3.4 Activation tests +~~~~~~~~~~~~~~~~~~~~~~~~ +The general aim of these tests is to understand the capacity of the +and speed with which the vswitch can accomodate new flows. + +Test ID: LTD.Activation.RFC2889.AddressCachingCapacity +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + **Title**: RFC2889 Address Caching Capacity Test + + **Prerequisite Test**: N/A + + **Priority**: + + **Description**: + + Please note this test is only applicable to virtual switches that are capable of + MAC learning. The aim of this test is to determine the address caching + capacity of the DUT for a constant load (fixed length frames at a fixed + interval time). The selected frame sizes are those previously defined + under `Default Test Parameters <#DefaultParams>`__. + + In order to run this test the aging time, that is the maximum time the + DUT will keep a learned address in its flow table, and a set of initial + addresses, whose value should be >= 1 and <= the max number supported by + the implementation must be known. Please note that if the aging time is + configurable it must be longer than the time necessary to produce frames + from the external source at the specified rate. If the aging time is + fixed the frame rate must be brought down to a value that the external + source can produce in a time that is less than the aging time. + + Learning Frames should be sent from an external source to the DUT to + install a number of flows. The Learning Frames must have a fixed + destination address and must vary the source address of the frames. The + DUT should install flows in its flow table based on the varying source + addresses. Frames should then be transmitted from an external source at + a suitable frame rate to see if the DUT has properly learned all of the + addresses. If there is no frame loss and no flooding, the number of + addresses sent to the DUT should be increased and the test is repeated + until the max number of cached addresses supported by the DUT + determined. + + **Expected Result**: + + **Metrics collected**: + + The following are the metrics collected for this test: + + - Number of cached addresses supported by the DUT. + - CPU and memory utilization may also be collected as part of this + test, to determine the vSwitch's performance footprint on the system. + + **Deployment scenario**: + + - Physical → virtual switch → 2 x physical (one receiving, one listening). + +Test ID: LTD.Activation.RFC2889.AddressLearningRate +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + **Title**: RFC2889 Address Learning Rate Test + + **Prerequisite Test**: LTD.Memory.RFC2889.AddressCachingCapacity + + **Priority**: + + **Description**: + + Please note this test is only applicable to virtual switches that are capable of + MAC learning. The aim of this test is to determine the rate of address + learning of the DUT for a constant load (fixed length frames at a fixed + interval time). The selected frame sizes are those previously defined + under `Default Test Parameters <#DefaultParams>`__, traffic should be + sent with each IPv4/IPv6 address incremented by one. The rate at which + the DUT learns a new address should be measured. The maximum caching + capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken + into consideration as the maximum number of addresses for which the + learning rate can be obtained. + + **Expected Result**: It may be worthwhile to report the behaviour when + operating beyond address capacity - some DUTs may be more friendly to + new addresses than others. + + **Metrics collected**: + + The following are the metrics collected for this test: + + - The address learning rate of the DUT. + + **Deployment scenario**: + + - Physical → virtual switch → 2 x physical (one receiving, one listening). + + 2.3.5 Coupling between control path and datapath Tests ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The following tests aim to determine how tightly coupled the datapath @@ -1897,7 +1904,7 @@ Test ID: LTD.CPDPCouplingFlowAddition - Physical → virtual switch → physical. -2.3.4 CPU and memory consumption +2.3.6 CPU and memory consumption ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The following tests will profile a virtual switch's CPU and memory utilization under various loads and circumstances. The following @@ -1936,7 +1943,7 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss - The configuration of the stress tool (for example the command line parameters used to start it.) -2.3.9 Summary List of Tests +2.3.7 Summary List of Tests ~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1. Throughput tests @@ -1950,8 +1957,6 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss - Test ID: LTD.Throughput.RFC6201.ResetTime - Test ID: LTD.Throughput.RFC2889.MaxForwardingRate - Test ID: LTD.Throughput.RFC2889.ForwardPressure - - Test ID: LTD.Throughput.RFC2889.AddressCachingCapacity - - Test ID: LTD.Throughput.RFC2889.AddressLearningRate - Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering - Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding @@ -1965,10 +1970,15 @@ Test ID: LTD.CPU.RFC2544.0PacketLoss - Test ID: LTD.Scalability.RFC2544.0PacketLoss - Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability -4. Coupling between control path and datapath Tests +4. Acivation tests + + - Test ID: LTD.Activation.RFC2889.AddressCachingCapacity + - Test ID: LTD.Activation.RFC2889.AddressLearningRate + +5. Coupling between control path and datapath Tests - Test ID: LTD.CPDPCouplingFlowAddition -5. CPU and memory consumption +6. CPU and memory consumption - Test ID: LTD.CPU.RFC2544.0PacketLoss |