diff options
Diffstat (limited to 'docs/userguides/trafficgen.rst')
| -rw-r--r-- | docs/userguides/trafficgen.rst | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/docs/userguides/trafficgen.rst b/docs/userguides/trafficgen.rst index 1bb09103..f510a596 100644 --- a/docs/userguides/trafficgen.rst +++ b/docs/userguides/trafficgen.rst @@ -13,9 +13,9 @@ VSPERF supports the following traffic generators: To see the list of traffic gens from the cli: - .. code-block:: console +.. code-block:: console - ./vsperf --list-trafficgens + $ ./vsperf --list-trafficgens This guide provides the details of how to install and configure the various traffic generators. @@ -26,7 +26,7 @@ The traffic default configuration can be found in tools/pkt_gen/trafficgen/trafficgenhelper.py, and is configured as follows: - .. code-block:: console +.. code-block:: console TRAFFIC_DEFAULTS = { 'l2': { @@ -53,23 +53,23 @@ The framesize paramter can be overridden from the configuration files by adding the following to your custom configuration file ``10_custom.conf``: - .. code-block:: console +.. code-block:: console TRAFFICGEN_PKT_SIZES = (64, 128,) OR from the commandline: - .. code-block:: console +.. code-block:: console - ./vsperf --test-param "pkt_sizes=x,y" $TESTNAME + $ ./vsperf --test-param "pkt_sizes=x,y" $TESTNAME You can also modify the traffic transmission duration and the number of trials run by the traffic generator by extending the example commandline above to: - .. code-block:: console +.. code-block:: console - ./vsperf --test-param "pkt_sizes=x,y;duration=10;rfc2455_trials=3" $TESTNAME + $ ./vsperf --test-param "pkt_sizes=x,y;duration=10;rfc2455_trials=3" $TESTNAME Dummy Setup ------------ @@ -77,22 +77,22 @@ To select the Dummy generator please add the following to your custom configuration file ``10_custom.conf``. - .. code-block:: console +.. code-block:: console TRAFFICGEN = 'Dummy' OR run ``vsperf`` with the ``--trafficgen`` argument - .. code-block:: console +.. code-block:: console - ./vsperf --trafficgen Dummy $TESTNAME + $ ./vsperf --trafficgen Dummy $TESTNAME Where $TESTNAME is the name of the vsperf test you would like to run. This will setup the vSwitch and the VNF (if one is part of your test) print the traffic configuration and prompt you to transmit traffic when the setup is complete. - .. code-block:: console +.. code-block:: console Please send 'continuous' traffic with the following stream config: 30mS, 90mpps, multistream False @@ -128,7 +128,7 @@ When your traffic gen has completed traffic transmission and provided the results please input these at the vsperf prompt. vsperf will try to verify the input: - .. code-block:: console +.. code-block:: console Is '$input_value' correct? |