diff options
Diffstat (limited to 'docs/configguide/trafficgen.rst')
| -rw-r--r-- | docs/configguide/trafficgen.rst | 23 |
1 files changed, 19 insertions, 4 deletions
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst index c323ae9d..28b34a6b 100644 --- a/docs/configguide/trafficgen.rst +++ b/docs/configguide/trafficgen.rst @@ -57,7 +57,7 @@ follows: }, } -The framesize paramter can be overridden from the configuration +The framesize parameter can be overridden from the configuration files by adding the following to your custom configuration file ``10_custom.conf``: @@ -169,7 +169,7 @@ IxNetwork -> IxNetwork\_$(VER\_NUM) -> IxNetwork TCL Server) Right click on IxNetwork TCL Server, select properties - Under shortcut tab in the Target dialogue box make sure there is the argument "-tclport xxxx" -where xxxx is your port number (take note of this port number you will +where xxxx is your port number (take note of this port number as you will need it for the 10\_custom.conf file). .. image:: TCLServerProperties.png @@ -329,7 +329,7 @@ Xena Networks Installation ~~~~~~~~~~~~ -Xena Networks traffic generator requires certain files and packages to be +Xena Networks traffic generator requires specific files and packages to be installed. It is assumed the user has access to the Xena2544.exe file which must be placed in VSPerf installation location under the tools/pkt_gen/xena folder. Contact Xena Networks for the latest version of this file. The user @@ -406,7 +406,7 @@ https://github.com/emmericp/MoonGen * Note: Today, MoonGen with VSPERF only supports 10Gbps line speeds. -For VSPerf use, MoonGen should be cloned from here (as opposed to the afore +For VSPerf use, MoonGen should be cloned from here (as opposed to the previously mentioned GitHub): git clone https://github.com/atheurer/MoonGen @@ -435,3 +435,18 @@ One can set up this ssh access by doing the following on both servers: ssh-keygen -b 2048 -t rsa ssh-copy-id <other server> + +Configuration +~~~~~~~~~~~~~ + +Connection information for your Xena Chassis must be supplied inside the +``10_custom.conf`` or ``03_custom.conf`` file. The following parameters must be +set to allow for proper connections to the chassis. + +.. code-block:: console + + TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "" + TRAFFICGEN_MOONGEN_USER = "" + TRAFFICGEN_MOONGEN_BASE_DIR = "" + TRAFFICGEN_MOONGEN_PORTS = "" + TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = "" |