aboutsummaryrefslogtreecommitdiffstats
path: root/conf
diff options
context:
space:
mode:
Diffstat (limited to 'conf')
-rwxr-xr-xconf/01_testcases.conf172
-rw-r--r--conf/02_vswitch.conf1
-rw-r--r--conf/03_traffic.conf137
-rw-r--r--conf/__init__.py67
-rw-r--r--conf/integration/01_testcases.conf80
5 files changed, 327 insertions, 130 deletions
diff --git a/conf/01_testcases.conf b/conf/01_testcases.conf
index a8d7a136..bdaeb4da 100755
--- a/conf/01_testcases.conf
+++ b/conf/01_testcases.conf
@@ -19,60 +19,12 @@
#
# "Name": "phy2phy_burst", # A human-readable string identifying the
# # test.
-# "Traffic Type": "rfc2544_throughput",
-# # One of the supported traffic types.
-# # It can be overridden by cli option traffic_type.
# "Deployment": "p2p", # One of the supported deployment scenarios.
# "Description": "Lorem ipsum..." # Optional. A human-readable string
# # describing the test.
# "Frame Modification": "vlan" # One of the supported frame modifications:
# # vlan, mpls, mac, dscp, ttl, ip_addr,
# # ip_port.
-# "biDirectional": ["True"|"False"]
-# # Specifies if generated traffic will be
-# # full-duplex (True) or half-duplex (False)
-# # It can be overridden by cli option bidirectional.
-# # Default value is "False". Must be of type
-# # string.
-# "MultiStream": 0-65535 # Optional. Defines number of flows simulated
-# # by traffic generator. Value 0 disables
-# # MultiStream feature
-# # It can be overridden by cli option multistream.
-# "Stream Type": ["L2"|"L3"|"L4"] # Optional. Stream Type is an extension
-# # of the "MultiStream" feature. If MultiStream
-# # is disabled, then Stream Type will be ignored.
-# # Stream Type defines ISO OSI network layer
-# # used for simulation of multiple streams.
-# # It can be overridden by cli option stream_type.
-# # Values:
-# # "L2" - iteration of destination MAC address
-# # "L3" - iteration of destination IP address
-# # "L4" - iteration of destination port
-# # of selected transport protocol
-# # Default value is "L4".
-# "Pre-installed Flows": ["Yes"|"No"]
-# # Optional. Pre-installed Flows is an extension
-# # of the "MultiStream" feature. If MultiStream
-# # is disabled, then Pre-installed Flows will be
-# # ignored. It defines if stream specific flows
-# # will be inserted into OVS or not.
-# # It can be overridden by cli option
-# # pre-installed_flows
-# # Values:
-# # "Yes" - flows will be inserted into OVS
-# # "No" - flows won't be inserted into OVS
-# # Default value is "No".
-# "Flow Type": ["port"|"IP"] # Optional. Defines flows complexity. In case
-# # it isn't specified, then "port" will be used.
-# # Values:
-# # "port" - flow is defined by ingress ports
-# # "IP" - flow is defined by ingress ports
-# # and src and dst IP addresses
-# "iLoad": 0-100 # Optional. Defines desired percentage
-# # of frame rate used during continuous stream
-# # tests. Can be overridden by cli option
-# # iload.
-# # Default value is 100.
# "Load": dictionary # Optional. Configures background load
# # during testcase execution.
# Description of "Load" dictionary keys, their meanings and available values:
@@ -115,7 +67,7 @@
# # stated in configuration files or value
# # specified on command line through --trafficgen
# # parameter.
-# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)}
+# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)},
# # Dictionary with testcase specific configuration
# # environment. Specified parameters will be modified
# # before the test execution and their original values will
@@ -129,128 +81,172 @@
PERFORMANCE_TESTS = [
{
"Name": "phy2phy_tput",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.Throughput.RFC2544.PacketLossRatio",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "phy2phy_forwarding",
- "Traffic Type": "rfc2889",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.Forwarding.RFC2889.MaxForwardingRate",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2889",
+ },
+ },
},
{
"Name": "back2back",
- "Traffic Type": "rfc2544_back2back",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.Throughput.RFC2544.BackToBackFrames",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_back2back",
+ },
+ },
},
{
"Name": "phy2phy_tput_mod_vlan",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "p2p",
"Frame Modification": "vlan",
- "biDirectional": "False",
- "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification"
+ "Description": "LTD.Throughput.RFC2544.PacketLossRatioFrameModification",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "phy2phy_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "p2p",
"Description": "Phy2Phy Continuous Stream",
- "biDirectional": "True",
- "iLoad": "100",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "frame_rate" : 100,
+ },
+ },
},
{
"Name": "pvp_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "pvp",
"Description": "PVP Continuous Stream",
- "biDirectional": "True",
- "iLoad": "100",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "frame_rate" : 100,
+ },
+ },
},
{
"Name": "pvvp_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "pvvp",
"Description": "PVVP Continuous Stream",
- "biDirectional": "True",
- "iLoad": "100",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "frame_rate" : 100,
+ },
+ },
},
{
"Name": "pvpv_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "pvpv",
"Description": "Two VMs in parallel with Continuous Stream",
- "biDirectional": "True",
- "iLoad": "100",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "frame_rate" : 100,
+ },
+ },
},
{
"Name": "phy2phy_scalability",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.Scalability.Flows.RFC2544.0PacketLoss",
- "MultiStream": "8000",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ "multistream" : "8000",
+ },
+ },
},
{
"Name": "pvp_tput",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "pvp",
"Description": "LTD.Throughput.RFC2544.PacketLossRatio",
- "biDirectional": "True",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "pvp_back2back",
- "Traffic Type": "rfc2544_back2back",
"Deployment": "pvp",
"Description": "LTD.Throughput.RFC2544.BackToBackFrames",
- "biDirectional": "True",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_back2back",
+ },
+ },
},
{
"Name": "pvvp_tput",
- "Traffic Type": "rfc2544_throughput",
"Collector": "cpu",
"Deployment": "pvvp",
"Description": "LTD.Throughput.RFC2544.PacketLossRatio",
- "biDirectional": "True",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "pvvp_back2back",
- "Traffic Type": "rfc2544_back2back",
"Collector": "cpu",
"Deployment": "pvvp",
"Description": "LTD.Throughput.RFC2544.BackToBackFrames",
- "biDirectional": "True",
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_back2back",
+ },
+ },
},
{
"Name": "phy2phy_cpu_load",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.CPU.RFC2544.0PacketLoss",
"Load" : {
"tool" : "stress-ng",
"load" : 100,
"reserved" : 4,
"pattern" : "c",
- }
+ },
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
{
"Name": "phy2phy_mem_load",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "p2p",
- "biDirectional": "True",
"Description": "LTD.Memory.RFC2544.0PacketLoss",
"Load" : {
"tool" : "stress-ng",
"load" : 50,
"pattern" : "m",
"load_memory" : 80,
- }
+ },
+ "Parameters" : {
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ },
+ },
},
-
]
diff --git a/conf/02_vswitch.conf b/conf/02_vswitch.conf
index 2b74dae9..2ca7591c 100644
--- a/conf/02_vswitch.conf
+++ b/conf/02_vswitch.conf
@@ -119,6 +119,7 @@ PATHS['vswitch']['OvsVanilla']['bin']['modules'] = ['openvswitch']
#
# parameters used for legacy DPDK configuration through '--dpdk' option of ovs-vswitchd
# e.g. ovs-vswitchd --dpdk --socket-mem 1024,0
+# This config line is also used for pkt_fwd option (TestPMD phy2phy and pvp tests)
VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
# options used for new type of OVS configuration via calls to ovs-vsctl
diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf
index 87210b8d..72324660 100644
--- a/conf/03_traffic.conf
+++ b/conf/03_traffic.conf
@@ -19,6 +19,143 @@
# log file for all traffic generator related commands
LOG_FILE_TRAFFIC_GEN = 'traffic-gen.log'
+# TRAFFIC dictionary defines traffic parameters used by all traffic generators.
+# Detailed description of TRAFFIC dictionary items follows:
+#
+# 'traffic_type' - One of the supported traffic types.
+# E.g. rfc2544_throughput, rfc2544_back2back
+# or rfc2544_continuous
+# Data type: str
+# Default value: "rfc2544_throughput".
+# 'bidir' - Specifies if generated traffic will be full-duplex (True)
+# or half-duplex (False)
+# Data type: str
+# Supported values: "True", "False"
+# Default value: "False".
+# 'frame_rate' - Defines desired percentage of frame rate used during
+# continuous stream tests.
+# Data type: int
+# Default value: 100.
+# 'multistream' - Defines number of flows simulated by traffic generator.
+# Value 0 disables multistream feature
+# Data type: int
+# Supported values: 0-65535
+# Default value: 0.
+# 'stream_type' - Stream type is an extension of the "multistream" feature.
+# If multistream is disabled, then stream type will be
+# ignored. Stream type defines ISO OSI network layer used
+# for simulation of multiple streams.
+# Data type: str
+# Supported values:
+# "L2" - iteration of destination MAC address
+# "L3" - iteration of destination IP address
+# "L4" - iteration of destination port
+# of selected transport protocol
+# Default value: "L4".
+# 'pre_installed_flows'
+# - Pre-installed flows is an extension of the multistream"
+# feature. If multistream is disabled, then pre-installed
+# flows will be ignored. It defines if stream specific flows
+# will be inserted into OVS or not.
+# Data type: str
+# Supported values:
+# "Yes" - flows will be inserted into OVS
+# "No" - flows won't be inserted into OVS
+# Default value: "No".
+# 'flow_type' - Defines flows complexity.
+# Data type: str
+# Supported values:
+# "port" - flow is defined by ingress ports
+# "IP" - flow is defined by ingress ports
+# and src and dst IP addresses
+# Default value: "port"
+# 'l2' - A dictionary with l2 network layer details. Supported
+# values are:
+# 'srcmac' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'dstmac' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "00:00:00:00:00:00".
+# 'framesize' - Specifies default frame size. This value should not be
+# changed directly. It will be overridden during testcase
+# execution by values specified by list TRAFFICGEN_PKT_SIZES.
+# Data type: int
+# Default value: 64
+# 'l3' - A dictionary with l3 network layer details. Supported
+# values are:
+# 'srcip' - Specifies source MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "1.1.1.1".
+# 'dstip' - Specifies destination MAC address filled by traffic generator.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: str
+# Default value: "90.90.90.90".
+# 'proto' - Specifies deflaut protocol type.
+# Please check particular traffic generator implementation
+# for supported protocol types.
+# Data type: str
+# Default value: "udp".
+# 'l4' - A dictionary with l4 network layer details. Supported
+# values are:
+# 'srcport' - Specifies source port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3000
+# 'dstport' - Specifies destination port of selected transport protocol.
+# NOTE: It can be modified by vsperf in some scenarios.
+# Data type: int
+# Default value: 3001
+# 'vlan' - A dictionary with vlan encapsulation details. Supported
+# values are:
+# 'enabled' - Specifies if vlan encapsulation should be enabled or
+# disabled.
+# Data type: bool
+# Default value: False
+# 'id' - Specifies vlan id.
+# Data type: int (NOTE: must fit to 12 bits)
+# Default value: 0
+# 'priority' - Specifies a vlan priority (PCP header field).
+# Data type: int (NOTE: must fit to 3 bits)
+# Default value: 0
+# 'cfi' - Specifies if frames can or cannot be dropped during
+# congestion (DEI header field).
+# Data type: int (NOTE: must fit to 1 bit)
+# Default value: 0
+TRAFFIC = {
+ 'traffic_type' : 'rfc2544_throughput',
+ 'frame_rate' : 100,
+ 'bidir' : 'True', # will be passed as string in title format to tgen
+ 'multistream' : 0,
+ 'stream_type' : 'L4',
+ 'pre_installed_flows' : 'No', # used by vswitch implementation
+ 'flow_type' : 'port', # used by vswitch implementation
+
+ 'l2': {
+ 'framesize': 64,
+ 'srcmac': '00:00:00:00:00:00',
+ 'dstmac': '00:00:00:00:00:00',
+ },
+ 'l3': {
+ 'proto': 'udp',
+ 'srcip': '1.1.1.1',
+ 'dstip': '90.90.90.90',
+ },
+ 'l4': {
+ 'srcport': 3000,
+ 'dstport': 3001,
+ },
+ 'vlan': {
+ 'enabled': False,
+ 'id': 0,
+ 'priority': 0,
+ 'cfi': 0,
+ },
+}
+
#path to traffic generators directory.
TRAFFICGEN_DIR = os.path.join(ROOT_DIR, 'tools/pkt_gen')
diff --git a/conf/__init__.py b/conf/__init__.py
index 2448d390..2a2586ff 100644
--- a/conf/__init__.py
+++ b/conf/__init__.py
@@ -20,6 +20,7 @@ and any user provided settings file.
# pylint: disable=invalid-name
+import copy
import os
import re
import logging
@@ -30,8 +31,7 @@ import netaddr
_LOGGER = logging.getLogger(__name__)
# Special test parameters which are not part of standard VSPERF configuration
-_EXTRA_TEST_PARAMS = ['bidirectional', 'traffic_type', 'iload', 'tunnel_type',
- 'multistream', 'stream_type', 'pre-installed_flows']
+_EXTRA_TEST_PARAMS = ['TUNNEL_TYPE']
# regex to parse configuration macros from 04_vnf.conf
# it will select all patterns starting with # sign
@@ -57,9 +57,19 @@ class Settings(object):
return getattr(self, attr)
else:
master_value = getattr(self, attr)
- # Check if parameter value was overridden by CLI option
+ # Check if parameter value was modified by CLI option
cli_value = get_test_param(attr, None)
- return cli_value if cli_value else master_value
+ if cli_value:
+ # TRAFFIC dictionary is not overridden by CLI option
+ # but only updated by specified values
+ if attr == 'TRAFFIC':
+ tmp_value = copy.deepcopy(master_value)
+ tmp_value = merge_spec(tmp_value, cli_value)
+ return tmp_value
+ else:
+ return cli_value
+ else:
+ return master_value
else:
raise AttributeError("%r object has no attribute %r" %
(self.__class__, attr))
@@ -137,7 +147,12 @@ class Settings(object):
"""
for key in conf:
if conf[key] is not None:
- setattr(self, key.upper(), conf[key])
+ if isinstance(conf[key], dict):
+ # recursively update dict items, e.g. TEST_PARAMS
+ setattr(self, key.upper(),
+ merge_spec(getattr(self, key.upper()), conf[key]))
+ else:
+ setattr(self, key.upper(), conf[key])
def load_from_env(self):
"""
@@ -271,17 +286,33 @@ def get_test_param(key, default=None):
:returns: Value for ``key`` if found, else ``default``.
"""
test_params = settings.getValue('TEST_PARAMS')
- if key in test_params:
- if not isinstance(test_params.get(key), str):
- return test_params.get(key)
+ return test_params.get(key, default) if test_params else default
+
+def merge_spec(orig, new):
+ """Merges ``new`` dict with ``orig`` dict, and returns orig.
+
+ This takes into account nested dictionaries. Example:
+
+ >>> old = {'foo': 1, 'bar': {'foo': 2, 'bar': 3}}
+ >>> new = {'foo': 6, 'bar': {'foo': 7}}
+ >>> merge_spec(old, new)
+ {'foo': 6, 'bar': {'foo': 7, 'bar': 3}}
+
+ You'll notice that ``bar.bar`` is not removed. This is the desired result.
+ """
+ for key in orig:
+ if key not in new:
+ continue
+
+ # Not allowing derived dictionary types for now
+ # pylint: disable=unidiomatic-typecheck
+ if type(orig[key]) == dict:
+ orig[key] = merge_spec(orig[key], new[key])
else:
- # values are passed inside string from CLI, so we must retype them accordingly
- try:
- return ast.literal_eval(test_params.get(key))
- except ValueError:
- # for backward compatibility, we have to accept strings without quotes
- _LOGGER.warning("Adding missing quotes around string value: %s = %s",
- key, str(test_params.get(key)))
- return str(test_params.get(key))
- else:
- return default
+ orig[key] = new[key]
+
+ for key in new:
+ if key not in orig:
+ orig[key] = new[key]
+
+ return orig
diff --git a/conf/integration/01_testcases.conf b/conf/integration/01_testcases.conf
index ff05186b..504b4458 100644
--- a/conf/integration/01_testcases.conf
+++ b/conf/integration/01_testcases.conf
@@ -25,15 +25,15 @@ SUPPORTED_TUNNELING_PROTO = ['vxlan', 'gre', 'geneve']
#
# Required for OP2P tests
# "Tunnel Type": ["vxlan"|"gre"|"geneve"] # Tunnel Type defines tunneling protocol to use.
-# # It can be overridden by cli option tunnel_type.
+# # It can be overridden by cli option TUNNEL_TYPE.
# # Values:
# # "vxlan" - iteration of destination MAC address
# # "gre" - iteration of destination IP address
# # "geneve" - iteration of destination UDP port
# # Default value is "vxlan".
#
-# biDirectional testing for OP2P is not yet supported.
-# biDirectional must be set to False.
+# bidirectional testing for OP2P is not yet supported.
+# TRAFFIC['bidir'] must be set to 'False'.
#
# "TestSteps": [] # Definition of integration test steps.
# # In case that this list is defined, then
@@ -320,55 +320,75 @@ STEP_VSWITCH_2PHY_6VM_FINIT = [
INTEGRATION_TESTS = [
{
"Name": "overlay_p2p_mod_tput",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "ptunp",
- "biDirectional": 'True',
"Tunnel Type": "vxlan",
"Description": ("Tunneling Throughput RFC2544 Test."
"The encap and decap are performed inside the "
"virtual switch itself in each direction to avoid "
"the need of ingress overlay traffic."),
- "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ "bidir" : "False",
+ },
+ },
},
{
"Name": "overlay_p2p_tput",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "op2p",
- "biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Throughput RFC2544 Test",
- "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ "bidir" : "False",
+ },
+ },
},
{
"Name": "overlay_p2p_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "op2p",
- "biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation RFC2544 Continuous Stream",
- "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "bidir" : "False",
+ },
+ },
},
{
"Name": "overlay_p2p_decap_tput",
- "Traffic Type": "rfc2544_throughput",
"Deployment": "op2p",
- "biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Throughput RFC2544 Test",
- "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_throughput",
+ "bidir" : "False",
+ },
+ },
},
{
"Name": "overlay_p2p_decap_cont",
- "Traffic Type": "rfc2544_continuous",
"Deployment": "op2p",
- "biDirectional": 'False',
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation RFC2544 Continuous Stream",
- "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFIC" : {
+ "traffic_type" : "rfc2544_continuous",
+ "bidir" : "False",
+ },
+ },
},
{
"Name": "vswitch_add_del_bridge",
@@ -758,8 +778,12 @@ INTEGRATION_TESTS = [
"Name": "2pvp_udp_dest_flows",
"Description": "RFC2544 Continuous TC with 2 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
- "Stream Type": "L4",
- "MultiStream": 2,
+ "Parameters" : {
+ "TRAFFIC" : {
+ "multistream" : 2,
+ "stream_type" : "L4",
+ },
+ },
"TestSteps": STEP_VSWITCH_2PHY_2VM_INIT +
STEP_VSWITCH_2_PARALLEL_VM_FLOWS_INIT + [
# Start 2 VMs
@@ -781,8 +805,12 @@ INTEGRATION_TESTS = [
"Name": "4pvp_udp_dest_flows",
"Description": "RFC2544 Continuous TC with 4 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
- "Stream Type": "L4",
- "MultiStream": 4,
+ "Parameters" : {
+ "TRAFFIC" : {
+ "multistream" : 4,
+ "stream_type" : "L4",
+ },
+ },
"TestSteps": STEP_VSWITCH_2PHY_4VM_INIT +
STEP_VSWITCH_4_PARALLEL_VM_FLOWS_INIT + [
# Start 4 VMs
@@ -808,8 +836,12 @@ INTEGRATION_TESTS = [
"Name": "6pvp_udp_dest_flows",
"Description": "RFC2544 Continuous TC with 6 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
- "Stream Type": "L4",
- "MultiStream": 6,
+ "Parameters" : {
+ "TRAFFIC" : {
+ "multistream" : 6,
+ "stream_type" : "L4",
+ },
+ },
"TestSteps": STEP_VSWITCH_2PHY_6VM_INIT +
STEP_VSWITCH_6_PARALLEL_VM_FLOWS_INIT + [
# Start VMs