diff options
Diffstat (limited to 'conf/integration')
| -rw-r--r-- | conf/integration/01b_dpdk_regression_tests.conf | 145 |
1 files changed, 52 insertions, 93 deletions
diff --git a/conf/integration/01b_dpdk_regression_tests.conf b/conf/integration/01b_dpdk_regression_tests.conf index abc56c28..44343d28 100644 --- a/conf/integration/01b_dpdk_regression_tests.conf +++ b/conf/integration/01b_dpdk_regression_tests.conf @@ -21,6 +21,10 @@ # Generic configuration used by OVSDPDK testcases # ############################################################ + +# required to import path to the log file +from conf import settings + _OVSDPDK_1st_PMD_CORE = 4 _OVSDPDK_2nd_PMD_CORE = 5 # calculate PMD mask from core IDs configured above @@ -32,8 +36,11 @@ _OVSDPDK_GUEST_5_CORES = [('7', '8', '9', '10', '11')] # number of queues configured in OVS and GUEST _OVSDPDK_MQ = '2' -# Path to the log file -_OVSDPDK_VSWITCH_LOG = os.path.join(LOG_DIR, LOG_FILE_VSWITCHD) +# path to the log file +_RESULTS_PATH = settings.getValue('RESULTS_PATH') +name, ext = os.path.splitext(settings.getValue('LOG_FILE_VSWITCHD')) +log_file = "{name}_{uid}{ex}".format(name=name,uid=settings.getValue('LOG_TIMESTAMP'),ex=ext) +_OVSDPDK_VSWITCH_LOG = os.path.join(_RESULTS_PATH, log_file) _OVSDPDK_HEADER_LEN = 18 # length of frame headers in bytes, it's used for calculation # of payload size, i.e. payload = frame_size - header_len @@ -172,59 +179,6 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ ['tools', 'assert', 'not len(#STEP[-1])'], ] }, - { - # Support of netdev-dpdk/detach has been removed from OVS, so testcase will fail with recent - # OVS/DPDK versions. There is an ongoing discussion about possible support of netdev-dpdk/detach - # in the future OVS versions. - # Test has been tested with: - # OVS_TAG = 03d6399e618e4136c5da0be2b6f18f0b7d75b2bb - # DPDK_TAG = v16.11 - "Name": "ovsdpdk_hotplug_detach", - "Deployment": "clean", - "Description": "Same as ovsdpdk_hotplug_attach, but delete and detach the device after the hotplug. " - "Note: Support of netdev-dpdk/detach has been removed from OVS, so testcase will fail " - "with recent OVS/DPDK versions.", - "vSwitch" : "OvsDpdkVhost", - "Parameters" : { - # suppress DPDK configuration, so physical interfaces are not bound to DPDK driver - 'WHITELIST_NICS' : [], - 'NICS' : [], - }, - "TestSteps": [ - # check if OVS supports netdev-dpdk/detach, fail otherwise - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] list-commands', '|netdev-dpdk\/detach'], - ['tools', 'assert', 'len(#STEP[-1])'], - # restore original NICS configuration, so we can use add/del_phy_port - ['settings', 'setValue', 'TEST_PARAMS', ''], - # find out which DPDK driver is being used; it should be the last configured - # DPDK module; optional path and .ko suffix must be removed - ['tools', 'eval', '\'$TOOLS["dpdk_modules"][-1]\'.split("/")[-1].split(".")[0]'], - # bind NIC to DPDK driver - ['tools', 'exec_shell', 'sudo $TOOLS["bind-tool"] --bind #STEP[-1] $NICS[0]["pci"]'], - # and check that DPDK port can be created without errors - ['vswitch', 'add_switch', 'int_br0'], - ['#port', 'vswitch', 'add_phy_port', 'int_br0'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', - '|Error attaching device.*$NICS[0]["pci"]'], - ['tools', 'assert', 'not len(#STEP[-1])'], - # try to unbind port - should fail beause it is being used - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] netdev-dpdk/detach $NICS[0]["pci"] 2>&1; exit 0', - '|Device.*$NICS[0]["pci"].*is being used by interface'], - ['tools', 'assert', 'len(#STEP[-1])'], - # delete port and unbind it - should succeed - ['vswitch', 'del_port', 'int_br0', '#STEP[port][0]'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] netdev-dpdk/detach $NICS[0]["pci"]', - '|Device.*$NICS[0]["pci"].*has been detached'], - ['tools', 'assert', 'len(#STEP[-1])'], - # try to add port again - ['vswitch', 'add_phy_port', 'int_br0'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', - '|Error attaching device.*$NICS[0]["pci"]'], - # it will work because auto attach was implemented into OVS - ['tools', 'assert', 'not len(#STEP[-1])'], - ['vswitch', 'del_switch', 'int_br0'], - ] - }, ] ############################################################ @@ -410,7 +364,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "VSWITCH_DPDK_MULTI_QUEUES" : _OVSDPDK_MQ, }, "TestSteps": [ - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk[01]\s+queue-id: \d+'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk[01]\s+queue-id:\s+\d+'], # check that requested nr of queues was created on both NICs ['tools', 'assert', 'len(#STEP[-1])=={}'.format(int(_OVSDPDK_MQ)*2)], ] @@ -432,8 +386,10 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ }, "TestSteps": [ ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] -- set Interface dpdk0 other_config:pmd-rxq-affinity="0:{},1:{}"'.format(_OVSDPDK_1st_PMD_CORE, _OVSDPDK_1st_PMD_CORE)], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id: 0 1'], - ['tools', 'assert', 'len(#STEP[-1])==1'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id:\s+0'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id:\s+1'], + ['tools', 'assert', 'len(#STEP[-2])==1'], + ['tools', 'assert', 'len(#STEP[-2])==1'], ] }, { @@ -453,8 +409,8 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ }, "TestSteps": [ ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] -- set Interface dpdk0 other_config:pmd-rxq-affinity="0:{},1:{}"'.format(_OVSDPDK_1st_PMD_CORE, _OVSDPDK_2nd_PMD_CORE)], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id: 0$'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id: 1$'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id:\s+0'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] dpif-netdev/pmd-rxq-show','|dpdk0\s+queue-id:\s+1'], ['tools', 'assert', 'len(#STEP[-2])==1'], ['tools', 'assert', 'len(#STEP[-2])==1'], ] @@ -475,12 +431,15 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TestSteps": STEP_VSWITCH_PVP_INIT + [ ['tools', 'exec_shell', "sudo $TOOLS['ovs-appctl'] dpif-netdev/pmd-rxq-show", - '|dpdkvhostuserclient0\s+queue-id: \d'], + '|dpdkvhostuserclient0\s+queue-id:\s+\d'], ['tools', 'assert', 'len(#STEP[-1])==1'], ['vnf', 'start'], ['tools', 'exec_shell', "sudo $TOOLS['ovs-appctl'] dpif-netdev/pmd-rxq-show", - '|dpdkvhostuserclient0\s+queue-id: 0 1'], - ['tools', 'assert', 'len(#STEP[-1])==1'], + '|dpdkvhostuserclient0\s+queue-id:\s+0'], + ['tools', 'exec_shell', "sudo $TOOLS['ovs-appctl'] dpif-netdev/pmd-rxq-show", + '|dpdkvhostuserclient0\s+queue-id:\s+1'], + ['tools', 'assert', 'len(#STEP[-2])==1'], + ['tools', 'assert', 'len(#STEP[-2])==1'], ['vnf', 'stop'], ] + STEP_VSWITCH_PVP_FINIT @@ -500,11 +459,12 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TRAFFICGEN_DURATION" : 5, "TRAFFICGEN" : "IxNet", "TRAFFIC" : { - "bidir" : "false", + "bidir" : "False", "traffic_type" : "rfc2544_continuous", "multistream" : 6, "stream_type" : "L3", "frame_rate" : 1, + "learning_frames" : False, 'l2': { 'srcmac': "00:00:07:00:0E:00", 'dstmac': "00:00:00:00:00:01" @@ -514,7 +474,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ 'proto': 'udp', 'srcip': '6.6.6.6', 'dstip': '1.1.1.1', - }, + } } }, "TestSteps": STEP_VSWITCH_PVP_INIT + [ @@ -525,6 +485,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ # so send_traffic() will end with success ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'priority' : '0', 'actions' : ['NORMAL']}], ['vnf', 'start'], # configure two channels, so multiple cores could be used ['vnf', 'execute_and_wait', 'ethtool -L eth0 combined 2'], @@ -549,7 +510,6 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ ['vnf', 'execute_and_wait', 'route add default gw 1.1.1.5 eth0'], ['vnf', 'execute_and_wait', 'arp -s 1.1.1.5 DE:AD:BE:EF:CA:FC'], ['vnf', 'execute_and_wait', 'ip a'], - ['trafficgen', 'send_traffic',{}], # check interrupts to verify that traffic was corectly dispatched... ['#result', 'vnf', 'execute_and_wait', 'cat /proc/interrupts', @@ -580,16 +540,15 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ # there must be separate CPU for each of RX/TX queues "GUEST_SMP" : ['5'], "GUEST_TESTPMD_PARAMS" : ['-c 0x1F -n 4 --socket-mem 512 -- ' - '--burst=64 -i --txqflags=0xf00 --nb-cores=4 ' - # map queue stats to separate regs to verify MQ functionality - '--rx-queue-stats-mapping=\(0,0,0\),\(0,1,1\),\(1,0,2\),\(1,1,3\) ' - '--tx-queue-stats-mapping=\(0,0,4\),\(0,1,5\),\(1,0,6\),\(1,1,7\) ' - '--disable-hw-vlan --rxq=2 --txq=2'], + '--burst=64 -i --nb-cores=4 ' + '--rxq=2 --txq=2'], "TRAFFICGEN_DURATION" : 5, "TRAFFIC" : { "traffic_type" : "rfc2544_continuous", "multistream" : 3, "stream_type" : "L3", + "frame_rate" : 1, + "learning_frames" : False, 'l3': { 'enabled': True, 'proto': 'udp', @@ -597,12 +556,21 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ 'dstip': '1.1.1.1', }, }, + "GUEST_QUEUE_STATS_MAPPING" : ["rx 0 0 0", + "rx 0 1 1", + "rx 1 0 2", + "rx 1 1 3", + "tx 0 0 4", + "tx 0 1 5", + "tx 1 0 6", + "tx 1 1 7" + ] }, "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT + [ ['vnf', 'start'], ['tools', 'exec_shell', "sudo $TOOLS['ovs-appctl'] dpif-netdev/pmd-rxq-show", - '|dpdk\w+\s+queue-id: \d'], + '|dpdk\w+\s+queue-id:\s+\d'], # there must be two standalone queue records for every interface (2x4) ['tools', 'assert', 'len(#STEP[-1])==8'], ['trafficgen', 'send_traffic', {}], @@ -739,7 +707,7 @@ _OVSDPDK_VDEV_ADD_NULL = [ ['vswitch', 'add_switch', 'int_br0'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] add-port int_br0 null0 -- ' 'set Interface null0 type=dpdk options:dpdk-devargs=eth_null0'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', '|dpdk-devargs=\S+eth_null0'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', '|dpdk-devargs=eth_null0'], ['tools', 'assert', 'len(#STEP[-1])==1'], ] @@ -776,7 +744,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TestSteps": _OVSDPDK_VDEV_ADD_NULL + [ ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] del-port null0'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] show', - '|dpdk-devargs=\S+eth_null0'], + '|dpdk-devargs=eth_null0'], ['tools', 'assert', 'not len(#STEP[-1])'], ] }, @@ -1017,9 +985,9 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TestSteps": [ ['vswitch', 'add_switch', 'int_br0'], ['vswitch', 'add_phy_port', 'int_br0'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdk0 mtu_request=9710'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdk0 mtu_request=9702'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] get Interface dpdk0 mtu'], - ['tools', 'assert', 'int(#STEP[-1])==9710'], + ['tools', 'assert', 'int(#STEP[-1])==9702'], # get line number of next log file entry ['tools', 'exec_shell', 'echo $((1+`wc -l $_OVSDPDK_VSWITCH_LOG | cut -d" " -f1`))', '(\d+)'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdk0 mtu_request=9711'], @@ -1027,7 +995,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ ['tools', 'exec_shell', "sed -n '#STEP[-2][0],$ p' $_OVSDPDK_VSWITCH_LOG", '|unsupported MTU 9711'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] get Interface dpdk0 mtu'], - ['tools', 'assert', 'int(#STEP[-1])==9710'], + ['tools', 'assert', 'int(#STEP[-1])==9702'], ] }, { @@ -1041,9 +1009,9 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ "TestSteps": [ ['vswitch', 'add_switch', 'int_br0'], ['vswitch', 'add_vport', 'int_br0'], - ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdkvhostuserclient0 mtu_request=9710'], + ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdkvhostuserclient0 mtu_request=9702'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] get Interface dpdkvhostuserclient0 mtu'], - ['tools', 'assert', 'int(#STEP[-1])==9710'], + ['tools', 'assert', 'int(#STEP[-1])==9702'], # get line number of next log file entry ['tools', 'exec_shell', 'echo $((1+`wc -l $_OVSDPDK_VSWITCH_LOG | cut -d" " -f1`))', '(\d+)'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] set Interface dpdkvhostuserclient0 mtu_request=9711'], @@ -1052,7 +1020,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ '|unsupported MTU 9711'], ['tools', 'assert', 'len(#STEP[-1])'], ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] get Interface dpdkvhostuserclient0 mtu'], - ['tools', 'assert', 'int(#STEP[-1])==9710'], + ['tools', 'assert', 'int(#STEP[-1])==9702'], ] }, { @@ -1200,8 +1168,8 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ ['trafficgen', 'get_results'], # all traffic should pass through (i.e. 0% frame loss) ['tools', 'assert', 'float(#STEP[-1][0]["frame_loss_percent"])==0'], - # set packetsize to 9019 and send traffic - ['settings', 'setValue', 'TRAFFICGEN_PKT_SIZES', (9019,)], + # set packetsize to 9702 and send traffic + ['settings', 'setValue', 'TRAFFICGEN_PKT_SIZES', (9702,)], # disable verification of send_traffic "!" prefix, otherwise vsperf # will fail when 100% packet loss is detected ['!trafficgen', 'send_traffic', {}], @@ -1244,10 +1212,6 @@ _OVSDPDK_RATE_set_rate_limiter = [ 'set Interface $_OVSDPDK_RATE_PORT$_OVSDPDK_RATE_NICID ' 'ingress_policing_burst=$_OVSDPDK_RATE_BURST ' 'ingress_policing_rate=$_OVSDPDK_RATE_RATE'], - # check vswitchd log file, that rate limiter was created - ['tools', 'exec_shell', "sed -n '#STEP[-2][0],$ p' $_OVSDPDK_VSWITCH_LOG", - '|CIR period'], - ['tools', 'assert', '("CIR period" in #STEP[-1])==$_OVSDPDK_RATE_LIMITER_CREATED'], # verify that interface has correct rate limiter configuration ['tools', 'exec_shell', 'sudo $TOOLS["ovs-vsctl"] ' 'list interface $_OVSDPDK_RATE_PORT$_OVSDPDK_RATE_NICID', @@ -1491,11 +1455,6 @@ _OVSDPDK_QOS_set_qos = [ 'other-config:cbs=$_OVSDPDK_QOS_CBS','|\w{8}-\w{4}-\w{4}-\w{4}-\w{12}'], ['tools', 'assert', 'len(#STEP[-1])==1'], - # Check the OVS logs - ['tools', 'exec_shell', "sed -n '#STEP[-3][0],$ p' $_OVSDPDK_VSWITCH_LOG", - '|CIR period'], - ['tools', 'assert', '"CIR period" in #STEP[-1]'], - # Check the QoS policy and attributes ['tools', 'exec_shell', 'sudo $TOOLS["ovs-appctl"] -t ovs-vswitchd qos/show ' '$_OVSDPDK_QOS_PORT$_OVSDPDK_QOS_NICID', '.+'], @@ -1615,7 +1574,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ # Check the OVS logs ['tools', 'exec_shell', "sed -n '#STEP[LOG_MARK][0],$ p' $_OVSDPDK_VSWITCH_LOG", - 'Failed to set QoS type egress-policer on port #STEP[1][0]: No such file or directory'], + 'Failed to set QoS type egress-policer on port #STEP[1][0]: Invalid argument'], ['tools', 'assert', 'len(#STEP[-1])==1'], # Check the attributes for vhost0 @@ -1645,7 +1604,7 @@ INTEGRATION_TESTS = INTEGRATION_TESTS + [ # Check the OVS logs ['tools', 'exec_shell', "sed -n '#STEP[LOG_MARK][0],$ p' $_OVSDPDK_VSWITCH_LOG", - 'Failed to set QoS type egress-policer on port #STEP[1][0]: No such file or directory'], + 'Failed to set QoS type egress-policer on port #STEP[1][0]: Invalid argument'], ['tools', 'assert', 'len(#STEP[-1])==1'], # Check the attributes for vhost0 |