diff options
Diffstat (limited to 'conf/integration/01_testcases.conf')
| -rw-r--r-- | conf/integration/01_testcases.conf | 49 |
1 files changed, 45 insertions, 4 deletions
diff --git a/conf/integration/01_testcases.conf b/conf/integration/01_testcases.conf index 7b2f7079..a584845a 100644 --- a/conf/integration/01_testcases.conf +++ b/conf/integration/01_testcases.conf @@ -328,6 +328,7 @@ INTEGRATION_TESTS = [ "The encap and decap are performed inside the " "virtual switch itself in each direction to avoid " "the need of ingress overlay traffic."), + "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, }, { "Name": "overlay_p2p_tput", @@ -337,6 +338,7 @@ INTEGRATION_TESTS = [ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "encapsulation", "Description": "Overlay Encapsulation Throughput RFC2544 Test", + "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, }, { "Name": "overlay_p2p_cont", @@ -346,6 +348,7 @@ INTEGRATION_TESTS = [ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "encapsulation", "Description": "Overlay Encapsulation Continuous Stream", + "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, }, { "Name": "overlay_p2p_decap_tput", @@ -355,6 +358,7 @@ INTEGRATION_TESTS = [ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "decapsulation", "Description": "Overlay Decapsulation Throughput RFC2544 Test", + "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, }, { "Name": "overlay_p2p_decap_cont", @@ -364,6 +368,7 @@ INTEGRATION_TESTS = [ "Tunnel Type": SUPPORTED_TUNNELING_PROTO[0], "Tunnel Operation": "decapsulation", "Description": "Overlay Decapsulation Continuous Stream", + "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'}, }, { "Name": "vswitch_add_del_bridge", @@ -449,6 +454,21 @@ INTEGRATION_TESTS = [ ] }, { + "Name": "vswitch_vports_add_del_flow", + "Deployment": "clean", + "Description": "vSwitch - configure switch with vports, add and delete flow", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], + ['vswitch', 'add_vport', 'int_br0'], + ['vswitch', 'add_vport', 'int_br0'], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'del_flow', 'int_br0', {'in_port': '#STEP[1][1]'}], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + { "Name": "vswitch_add_del_flows", "Deployment": "clean", "Description": "vSwitch - add and delete flows", @@ -497,6 +517,21 @@ INTEGRATION_TESTS = [ STEP_VSWITCH_PVP_FINIT }, { + "Name": "vswitch_vports_pvp", + "Deployment": "clean", + "Description": "vSwitch - configure switch with vports and one vnf", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], + ['vswitch', 'add_vport', 'int_br0'], + ['vswitch', 'add_vport', 'int_br0'], + ['vnf', 'start'], + ['vnf', 'stop'], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + { "Name": "vswitch_pvp_tput", "Deployment": "clean", "Description": "vSwitch - configure switch, vnf and execute RFC2544 throughput test", @@ -717,7 +752,9 @@ INTEGRATION_TESTS = [ { # Topology: 2 Parallel PVP connections # To run a Linux bridge as a loopback in the Guest use: - # --test-params "guest_loopback=linux_bridge" --integration 2pvp_udp_dest_flows + # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 2pvp_udp_dest_flows + # or add "Parameters" option to the test definition: + # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],}, "Name": "2pvp_udp_dest_flows", "Description": "Continuous TC with 2 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", @@ -738,7 +775,9 @@ INTEGRATION_TESTS = [ { # Topology: 4 Parallel PVP connections # To run a Linux bridge as a loopback in the Guest use: - # --test-params "guest_loopback=linux_bridge" --integration 4pvp_udp_dest_flows + # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 4pvp_udp_dest_flows + # or add "Parameters" option to the test definition: + # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],}, "Name": "4pvp_udp_dest_flows", "Description": "Continuous TC with 4 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", @@ -763,7 +802,9 @@ INTEGRATION_TESTS = [ { # Topology: 6 Parallel PVP connections # To run a Linux bridge as a loopback in the Guest use: - # --test-params "guest_loopback=linux_bridge" --integration 6pvp_udp_dest_flows + # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 6pvp_udp_dest_flows + # or add "Parameters" option to the test definition: + # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],}, "Name": "6pvp_udp_dest_flows", "Description": "Continuous TC with 6 Parallel VMs, flows on UDP Dest Port", "Deployment": "clean", @@ -871,7 +912,7 @@ INTEGRATION_TESTS = [ # "vSwitch" : "OvsVanilla", # "VNF" : "QemuVirtioNet", # "Trafficgen": "IxNet", -# "Parameters": {"guest_loopback" : "linux_bridge"}, +# "Parameters": {"GUEST_LOOPBACK" : ["linux_bridge"],}, # "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT + # [ # ['vnf', 'start'], |