diff options
Diffstat (limited to 'conf/10_custom.conf')
| -rw-r--r-- | conf/10_custom.conf | 62 |
1 files changed, 8 insertions, 54 deletions
diff --git a/conf/10_custom.conf b/conf/10_custom.conf index 3f98d543..8883cb7c 100644 --- a/conf/10_custom.conf +++ b/conf/10_custom.conf @@ -15,78 +15,32 @@ RTE_TARGET = '' # the relevant DPDK build target # traffic generator to use in tests -TRAFFICGEN = 'TestCenter' -#TRAFFICGEN = 'Dummy' +#TRAFFICGEN = 'TestCenter' +TRAFFICGEN = 'Dummy' #TRAFFICGEN = 'IxNet' #TRAFFICGEN = 'Ixia' ########################################### # Spirent TestCenter Configuration -- BEGIN -# Path to Python 2 executable -TRAFFICGEN_STC_PYTHON2_PATH = "/usr/local/bin/python2.7" -# Path to the location of the TestCenter files -TRAFFICGEN_STC_TESTCENTER_PATH = "./tools/pkt_gen/testcenter" -# Name of the TestCenter RFC2544 Tput helper python script -TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME = "testcenter-rfc2544-throughput.py" -# The address of the Spirent Lab Server to use TRAFFICGEN_STC_LAB_SERVER_ADDR = "10.134.156.93" -# The address of the Spirent License Server in your environment + TRAFFICGEN_STC_LICENSE_SERVER_ADDR = "10.134.156.96" -# The address of the TestCenter chassis that holds the east port + TRAFFICGEN_STC_EAST_CHASSIS_ADDR = "10.134.156.70" -# The slot number of the card that holds the east port TRAFFICGEN_STC_EAST_SLOT_NUM = "1" -# The port number on the card that holds the east port TRAFFICGEN_STC_EAST_PORT_NUM = "1" -# The address of the TestCenter chassis that holds the west port +TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3" +TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103" + TRAFFICGEN_STC_WEST_CHASSIS_ADDR = "10.134.156.70" -# The slot number of the card that holds the west port TRAFFICGEN_STC_WEST_SLOT_NUM = "1" -# The port number on the card that holds the west port TRAFFICGEN_STC_WEST_PORT_NUM = "2" -# The friendly name to identify the Spirent Lab Server test session -TRAFFICGEN_STC_TEST_SESSION_NAME = "RFC2544 Tput" -# The directory to copy results to -TRAFFICGEN_STC_RESULTS_DIR = "./Results" -# The prefix for the CSV results file -TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = "RFC2544_tput" -# The number of trials to execute during the test -TRAFFICGEN_STC_NUMBER_OF_TRIALS = "1" -# The duration of each trial executed during the test, in seconds -TRAFFICGEN_STC_TRIAL_DURATION_SEC = "60" -# The traffic pattern between endpoints, BACKBONE, MESH or PAIR -TRAFFICGEN_STC_TRAFFIC_PATTERN = "PAIR" -# The search mode used to find the throughput rate, COMBO, STEP or BINARY -TRAFFICGEN_STC_SEARCH_MODE = "BINARY" -# The learning mode used during the test, AUTO, L2_LEARNING, L3_LERNING, or NONE -TRAFFICGEN_STC_LEARNING_MODE = "AUTO" -# The minimum percent line rate that will be used during the test -TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT = "1.0" -# The maximum percent line rate that will be used during the test -TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT = "99.0" -# If SearchMode is BINARY, the percent line rate that will be used at the start of the test -TRAFFICGEN_STC_RATE_INITIAL_PCT = "99.0" -# When SearchMode is STEP, the percent increase in load per step -TRAFFICGEN_STC_RATE_STEP_PCT = "10.0" -# The minimum percentage of load adjustment between iterations -TRAFFICGEN_STC_RESOLUTION_PCT = "1.0" -# The frame size, in bytes -TRAFFICGEN_STC_FRAME_SIZE = "256" -# The maximum acceptable frame loss percent in any iteration -TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT = "0.0" -# The address to assign to the first emulated device interface on the first east port -TRAFFICGEN_STC_EAST_INTF_ADDR = "192.85.1.3" -# The gateway address to assign to the first emulated device interface on the first east port -TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = "192.85.1.103" -# The address to assign to the first emulated device interface on the first west port TRAFFICGEN_STC_WEST_INTF_ADDR = "192.85.1.103" -# The gateway address to assign to the first emulated device interface on the first west port TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = "192.85.1.3" -# Print additional information to the terminal during the test -TRAFFICGEN_STC_VERBOSE = "True" # Spirent TestCenter Configuration -- END ######################################### + # Ixia/IxNet configuration TRAFFICGEN_IXIA_CARD = '' TRAFFICGEN_IXIA_PORT1 = '' |