diff options
Diffstat (limited to 'ci/build-vsperf.sh')
-rwxr-xr-x | ci/build-vsperf.sh | 177 |
1 files changed, 153 insertions, 24 deletions
diff --git a/ci/build-vsperf.sh b/ci/build-vsperf.sh index e08dd357..d50a431d 100755 --- a/ci/build-vsperf.sh +++ b/ci/build-vsperf.sh @@ -1,6 +1,6 @@ #!/bin/bash # -# Copyright 2015 Intel Corporation. +# Copyright 2015-2016 Intel Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -21,15 +21,22 @@ # where job_type is one of "verify", "merge", "daily" # -# configuration +# exit codes # EXIT=0 +EXIT_TC_FAILED=1 +EXIT_NO_RESULTS=10 +EXIT_NO_TEST_REPORT_LOG_DIR=11 + +# +# configuration +# + VSPERF_BIN='./vsperf' -LOG_FILE_USER='/tmp/vsperf_user.log' -LOG_FILE_VANILLA='/tmp/vsperf_vanilla.log' -LOG_FILE_PREFIX="/tmp/vsperf_build_" -OPNFV_POD="intel-pod3" +LOG_FILE_PREFIX="/tmp/vsperf_build" +DATE=$(date -u +"%Y-%m-%d_%H-%M-%S") +BRANCH=${GIT_BRANCH##*/} # CI job specific configuration # VERIFY - run basic set of TCs with default settings @@ -42,7 +49,32 @@ TESTPARAM_MERGE="" TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back' TESTPARAM_DAILY='--test-params pkt_sizes=64,128,512,1024,1518' # check if user config file exists if not then we will use default settings -[ -f $HOME/vsperf.conf ] && CONF_FILE="--conf-file ${HOME}/vsperf.conf" || CONF_FILE="" +if [ -f $HOME/vsperf-${BRANCH}.conf ] ; then + # branch specific config was found + CONF_FILE="--conf-file ${HOME}/vsperf-${BRANCH}.conf" +else + if [ -f $HOME/vsperf.conf ] ; then + CONF_FILE="--conf-file ${HOME}/vsperf.conf" + else + CONF_FILE="" + fi +fi + +# Test report related configuration +TEST_REPORT_PARTIAL="*_test_report.rst" +TEST_REPORT_DIR="${WORKSPACE}/docs/results" +TEST_REPORT_INDEX="${TEST_REPORT_DIR}/index.rst" +TEST_REPORT_LINK_OLD="https://wiki.opnfv.org/wiki/vsperf_results" +TEST_REPORT_FILE="${WORKSPACE}/docs_output/results/results.pdf" +TEST_REPORT_TARBALL="vswitchperf_logs_${DATE}.tar.gz" + +if [[ "x${BRANCH}" == "xmaster" ]]; then + TEST_REPORT_LINK_NEW="https://artifactory.opnfv.org/logs/$PROJECT/$NODE_NAME/$DATE/${TEST_REPORT_TARBALL}" +else + TEST_REPORT_LINK_NEW="https://artifactory.opnfv.org/logs/$PROJECT/$NODE_NAME/$BRANCH/$DATE/${TEST_REPORT_TARBALL}" +fi + +TEST_REPORT_LOG_DIR="${HOME}/opnfv/$PROJECT/results/$BRANCH" # # functions @@ -90,7 +122,7 @@ function print_results() { printf " %-70s %-6s\n" $RES_FILE "OK" else printf " %-70s %-6s\n" $RES_FILE "FAILED" - EXIT=1 + EXIT=$EXIT_TC_FAILED fi done } @@ -100,9 +132,6 @@ function print_results() { # $1 - vswitch and vnf combination, one of OVS_vanilla, OVS_with_DPDK_and_vHost_Cuse, OVS_with_DPDK_and_vHost_User # $2 - CI job type, one of verify, merge, daily function execute_vsperf() { - # figure out log file name - LOG_FILE="${LOG_FILE_PREFIX}"`date "+%Y%m%d_%H%M%S%N"`".log" - # figure out list of TCs and execution parameters case $2 in "verify") @@ -122,32 +151,44 @@ function execute_vsperf() { # execute testcases echo -e "\nExecution of VSPERF for $1" - # vsperf must be executed directly from vsperf directory - cd .. + + DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S") + case $1 in "OVS_vanilla") - echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE" - $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE + # figure out log file name + LOG_SUBDIR="OvsVanilla" + LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log" + + echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE" + $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsVanilla --vnf QemuVirtioNet $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE ;; "OVS_with_DPDK_and_vHost_Cuse") - echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE" - $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE + # figure out log file name + LOG_SUBDIR="OvsDpdkVhostCuse" + LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log" + + echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE" + $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostCuse $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE ;; *) - echo "$VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE" - $VSPERF_BIN --opnfvpod="$OPNFV_POD" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE + # figure out log file name + LOG_SUBDIR="OvsDpdkVhost" + LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log" + + echo "$VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE" + $VSPERF_BIN --opnfvpod="$NODE_NAME" --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &> $LOG_FILE ;; esac - # let's go back to CI dir - cd - # evaluation of results echo -e "\nResults for $1" - RES_DIR=`grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-` - if [ "x" == "x${RES_DIR}" ] ; then + RES_DIR="/$(grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-)" + if [[ "/" == "${RES_DIR}" ]] ; then echo "FAILURE: Results are not available." + exit $EXIT_NO_RESULTS else - print_results "/${RES_DIR}" + print_results "${RES_DIR}" fi # show detailed result figures @@ -161,12 +202,94 @@ function execute_vsperf() { # TC results sed -n '/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file | grep -v "Unknown" | cat -s done + + # add test results into the final doc template + for report in ${RES_DIR}/${TEST_REPORT_PARTIAL} ; do + # modify link to the artifactory with test report and logs + if [ -f $report ] ; then + sed -i -e "s,$TEST_REPORT_LINK_OLD,$TEST_REPORT_LINK_NEW," "$report" + cp $report $TEST_REPORT_DIR + echo " $(basename $report)" >> $TEST_REPORT_INDEX + fi + done + + # copy logs into dedicated directory + mkdir ${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR} + [ -f "$LOG_FILE" ] && cp -a "${LOG_FILE}" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null + [ -d "$RES_DIR" ] && cp -ar "$RES_DIR" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null +} + +# generates final test_report in PDF and HTML formats +function generate_report() { + + # prepare final tarball with all logs... + tar --exclude "${TEST_REPORT_TARBALL}" -czf "${TEST_REPORT_LOG_DIR}/${TEST_REPORT_TARBALL}" $(find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d) + # ...and remove original log files + find "${TEST_REPORT_LOG_DIR}" -mindepth 1 -maxdepth 1 -type d -exec rm -rf \{\} \; + + # clone releng repository + echo "Cloning releng repository..." + [ -d releng ] && rm -rf releng + git clone https://gerrit.opnfv.org/gerrit/releng &> /dev/null + + # generate final docs with test results + echo "Generating test report..." + sed -ie 's,python ,python2 ,g' ./releng/utils/docs-build.sh + ./releng/utils/docs-build.sh &> /dev/null + + # store PDF with test results into dedicated directory + if [ -f $TEST_REPORT_FILE ] ; then + cp -a $TEST_REPORT_FILE $TEST_REPORT_LOG_DIR + echo "Final test report has been created." + else + echo "FAILURE: Generation of final test report has failed." + fi +} + +# pushes test report and logs collected during test execution into artifactory +function push_results_to_artifactory() { + echo "Pushing results and logs into artifactory..." + . ./releng/utils/push-test-logs.sh "$DATE" + + # enter workspace as it could be modified by 3rd party script + cd $WORKSPACE +} + +# removes any local changes of repository +function cleanup() { + echo "Cleaning up..." + git stash -u +} + +# prepares directory for logs collection and removes old logs +function initialize_logdir() { + if [[ "x$TEST_REPORT_LOG_DIR" == "x" ]] ; then + echo "FAILURE: Logging directory is not defined. Logs and report cannot be published!" + exit $EXIT_NO_TEST_REPORT_LOG_DIR + else + # remove TEST_REPORT_LOG_DIR if it exists + if [ -e $TEST_REPORT_LOG_DIR ] ; then + if [ -f $TEST_REPORT_LOG_DIR ] ; then + rm $TEST_REPORT_LOG_DIR + else + rm -rf ${TEST_REPORT_LOG_DIR} + fi + fi + # create TEST_REPORT_LOG_DIR + mkdir -p $TEST_REPORT_LOG_DIR + fi } # # main # +# enter workspace dir +cd $WORKSPACE + +# initialization +initialize_logdir + # execute job based on passed parameter case $1 in "verify") @@ -195,6 +318,12 @@ case $1 in execute_vsperf OVS_vanilla $1 terminate_vsperf + generate_report + + push_results_to_artifactory + + cleanup + exit $EXIT ;; esac |