aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xci/build-vsperf.sh2
-rwxr-xr-xconf/01_testcases.conf13
-rw-r--r--conf/03_traffic.conf19
-rw-r--r--conf/04_vnf.conf2
-rw-r--r--conf/10_custom.conf2
-rw-r--r--conf/__init__.py78
-rw-r--r--conf/integration/01_testcases.conf19
-rw-r--r--conf/integration/03_traffic.conf3
-rw-r--r--core/traffic_controller.py17
-rw-r--r--core/traffic_controller_rfc2544.py5
-rw-r--r--core/traffic_controller_rfc2889.py7
-rw-r--r--docs/configguide/trafficgen.rst5
-rwxr-xr-xdocs/design/vswitchperf_design.rst3
-rw-r--r--docs/requirements/vswitchperf_ltp.rst2
-rwxr-xr-xdocs/userguide/integration.rst20
-rw-r--r--docs/userguide/teststeps.rst4
-rwxr-xr-xdocs/userguide/testusage.rst90
-rw-r--r--testcases/testcase.py23
-rwxr-xr-xtools/pkt_gen/ixnet/ixnet.py18
-rw-r--r--vnfs/qemu/qemu.py34
-rw-r--r--vnfs/qemu/qemu_dpdk_vhost_user.py5
-rwxr-xr-xvsperf45
-rw-r--r--vswitches/ovs_dpdk_vhost.py11
23 files changed, 257 insertions, 170 deletions
diff --git a/ci/build-vsperf.sh b/ci/build-vsperf.sh
index 637bc474..38fda03b 100755
--- a/ci/build-vsperf.sh
+++ b/ci/build-vsperf.sh
@@ -49,7 +49,7 @@ TESTCASES_MERGE="vswitch_add_del_bridge vswitch_add_del_bridges vswitch_add_del_
TESTPARAM_MERGE="--integration"
# DAILY - run selected TCs for defined packet sizes
TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'
-TESTPARAM_DAILY='--test-params pkt_sizes=64,128,512,1024,1518'
+TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'
# check if user config file exists if not then we will use default settings
if [ -f $HOME/vsperf-${BRANCH}.conf ] ; then
# branch specific config was found
diff --git a/conf/01_testcases.conf b/conf/01_testcases.conf
index 55cce1cf..f30c1912 100755
--- a/conf/01_testcases.conf
+++ b/conf/01_testcases.conf
@@ -115,11 +115,14 @@
# # stated in configuration files or value
# # specified on command line through --trafficgen
# # parameter.
-# "Parameters" : "pkt_sizes=512" # Defines list of test parameters used for test
-# # execution. It will override any values defined
-# # by TEST_PARAMS option stated in configuration
-# # files or values specified on command line through
-# # --test-params parameter.
+# "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (512,)}
+# # Dictionary with testcase specific configuration
+# # environment. Specified parameters will be modified
+# # before the test execution and their original values will
+# # be restored after TC finishes. This dictionary will
+# # override any values defined by TEST_PARAMS option
+# # stated in configuration files or values specified
+# # on command line through --test-params parameter.
# "Test Modifier": [FrameMod|Other],
# "Dependency": [Test_Case_Name |None],
diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf
index 8efd5aab..d7327629 100644
--- a/conf/03_traffic.conf
+++ b/conf/03_traffic.conf
@@ -34,6 +34,15 @@ TRAFFICGEN = 'Dummy'
# Expand like this: (64, 128, 256, 512, 1024)
TRAFFICGEN_PKT_SIZES = (64,)
+TRAFFICGEN_DURATION = 30
+
+TRAFFICGEN_RFC2544_TESTS = 1
+TRAFFICGEN_RFC2889_TRIALS = 1
+TRAFFICGEN_LOSSRATE = 0.0
+
+#############################
+# IXIA Configuration -- BEGIN
+
# path to 'ixos' install path
TRAFFICGEN_IXIA_ROOT_DIR = '/opt/ixos'
@@ -67,6 +76,10 @@ TRAFFICGEN_IXIA_3RD_PARTY = os.path.join(ROOT_DIR, '3rd_party/ixia')
# default TCL script, which will be used for IXNETWORK configuration
TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544.tcl'
+# IXIA Configuration -- END
+###########################
+
+
###########################################
# Spirent TestCenter Configuration -- BEGIN
@@ -172,6 +185,9 @@ TRAFFICGEN_STC_VERBOSE = "True"
# Spirent TestCenter Configuration -- END
#########################################
+#############################
+# Xena Configuration -- BEGIN
+
# Xena traffic generator connection info
TRAFFICGEN_XENA_IP = ''
TRAFFICGEN_XENA_PORT1 = ''
@@ -198,6 +214,9 @@ TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
+# Xena Configuration -- END
+###########################
+
###################################################
# MoonGen Configuration and Connection Info-- BEGIN
diff --git a/conf/04_vnf.conf b/conf/04_vnf.conf
index d3b4be4d..75f107e8 100644
--- a/conf/04_vnf.conf
+++ b/conf/04_vnf.conf
@@ -96,8 +96,6 @@ GUEST_SHARED_DRIVE_TYPE = ['scsi']
# 'linux_bridge' - linux bridge will be configured
# 'buildin' - nothing will be configured by vsperf; VM image must
# ensure traffic forwarding between its interfaces
-# This configuration option can be overridden by CLI SCALAR option
-# guest_loopback, e.g. --test-params "guest_loopback=l2fwd"
# For 2 VNFs you may use ['testpmd', 'l2fwd']
GUEST_LOOPBACK = ['testpmd']
diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 25e3478e..929d2679 100644
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -103,7 +103,7 @@ TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = '10'
# MoonGen Configuration and Connection Info-- END
###################################################
-#TEST_PARAMS = {'pkt_sizes':'64'}
+#TEST_PARAMS = {'TRAFFICGEN_PKT_SIZES':(64,)}
OPNFV_INSTALLER = "Fuel"
OPNFV_URL = "http://testresults.opnfv.org/testapi"
PACKAGE_LIST = "src/package-list.mk"
diff --git a/conf/__init__.py b/conf/__init__.py
index 4d6f57fe..2448d390 100644
--- a/conf/__init__.py
+++ b/conf/__init__.py
@@ -29,6 +29,10 @@ import netaddr
_LOGGER = logging.getLogger(__name__)
+# Special test parameters which are not part of standard VSPERF configuration
+_EXTRA_TEST_PARAMS = ['bidirectional', 'traffic_type', 'iload', 'tunnel_type',
+ 'multistream', 'stream_type', 'pre-installed_flows']
+
# regex to parse configuration macros from 04_vnf.conf
# it will select all patterns starting with # sign
# and returns macro parameters and step
@@ -49,7 +53,13 @@ class Settings(object):
"""Return a settings item value
"""
if attr in self.__dict__:
- return getattr(self, attr)
+ if attr == 'TEST_PARAMS':
+ return getattr(self, attr)
+ else:
+ master_value = getattr(self, attr)
+ # Check if parameter value was overridden by CLI option
+ cli_value = get_test_param(attr, None)
+ return cli_value if cli_value else master_value
else:
raise AttributeError("%r object has no attribute %r" %
(self.__class__, attr))
@@ -136,6 +146,24 @@ class Settings(object):
for key in os.environ:
setattr(self, key, os.environ[key])
+ def check_test_params(self):
+ """
+ Check all parameters defined inside TEST_PARAMS for their
+ existence. In case that non existing vsperf parmeter name
+ is detected, then VSPER will raise a runtime error.
+ """
+ unknown_keys = []
+ for key in settings.getValue('TEST_PARAMS'):
+ if key == 'TEST_PARAMS':
+ raise RuntimeError('It is not allowed to define TEST_PARAMS '
+ 'as a test parameter')
+ if key not in self.__dict__ and key not in _EXTRA_TEST_PARAMS:
+ unknown_keys.append(key)
+
+ if len(unknown_keys):
+ raise RuntimeError('Test parameters contain unknown configuration '
+ 'parameter(s): {}'.format(', '.join(unknown_keys)))
+
def check_vm_settings(self, vm_number):
"""
Check all VM related settings starting with GUEST_ prefix.
@@ -145,15 +173,12 @@ class Settings(object):
"""
for key in self.__dict__:
if key.startswith('GUEST_'):
- if (isinstance(self.__dict__[key], str) and
- self.__dict__[key].find('#') >= 0):
- self.__dict__[key] = [self.__dict__[key]]
+ value = self.getValue(key)
+ if isinstance(value, str) and value.find('#') >= 0:
self._expand_vm_settings(key, 1)
- self.__dict__[key] = self.__dict__[key][0]
- if isinstance(self.__dict__[key], list):
- if (len(self.__dict__[key]) < vm_number or
- str(self.__dict__[key][0]).find('#') >= 0):
+ if isinstance(value, list):
+ if len(value) < vm_number or str(value[0]).find('#') >= 0:
# expand configuration for all VMs
self._expand_vm_settings(key, vm_number)
@@ -161,7 +186,15 @@ class Settings(object):
"""
Expand VM option with given key for given number of VMs
"""
- master_value = self.__dict__[key][0]
+ tmp_value = self.getValue(key)
+ if isinstance(tmp_value, str):
+ scalar = True
+ master_value = tmp_value
+ tmp_value = [tmp_value]
+ else:
+ scalar = False
+ master_value = tmp_value[0]
+
master_value_str = str(master_value)
if master_value_str.find('#') >= 0:
self.__dict__[key] = []
@@ -190,9 +223,12 @@ class Settings(object):
value = ast.literal_eval(value)
self.__dict__[key].append(value)
else:
- for vmindex in range(len(self.__dict__[key]), vm_number):
+ for vmindex in range(len(tmp_value), vm_number):
self.__dict__[key].append(master_value)
+ if scalar:
+ self.__dict__[key] = self.__dict__[key][0]
+
_LOGGER.debug("Expanding option: %s = %s", key, self.__dict__[key])
def __str__(self):
@@ -203,7 +239,11 @@ class Settings(object):
Returns:
A human-readable string.
"""
- return pprint.pformat(self.__dict__)
+ tmp_dict = {}
+ for key in self.__dict__:
+ tmp_dict[key] = self.getValue(key)
+
+ return pprint.pformat(tmp_dict)
#
# validation methods used by step driven testcases
@@ -222,7 +262,6 @@ class Settings(object):
settings = Settings()
-
def get_test_param(key, default=None):
"""Retrieve value for test param ``key`` if available.
@@ -232,4 +271,17 @@ def get_test_param(key, default=None):
:returns: Value for ``key`` if found, else ``default``.
"""
test_params = settings.getValue('TEST_PARAMS')
- return test_params.get(key, default) if test_params else default
+ if key in test_params:
+ if not isinstance(test_params.get(key), str):
+ return test_params.get(key)
+ else:
+ # values are passed inside string from CLI, so we must retype them accordingly
+ try:
+ return ast.literal_eval(test_params.get(key))
+ except ValueError:
+ # for backward compatibility, we have to accept strings without quotes
+ _LOGGER.warning("Adding missing quotes around string value: %s = %s",
+ key, str(test_params.get(key)))
+ return str(test_params.get(key))
+ else:
+ return default
diff --git a/conf/integration/01_testcases.conf b/conf/integration/01_testcases.conf
index 83d420bf..a584845a 100644
--- a/conf/integration/01_testcases.conf
+++ b/conf/integration/01_testcases.conf
@@ -328,6 +328,7 @@ INTEGRATION_TESTS = [
"The encap and decap are performed inside the "
"virtual switch itself in each direction to avoid "
"the need of ingress overlay traffic."),
+ "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
},
{
"Name": "overlay_p2p_tput",
@@ -337,6 +338,7 @@ INTEGRATION_TESTS = [
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Throughput RFC2544 Test",
+ "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
},
{
"Name": "overlay_p2p_cont",
@@ -346,6 +348,7 @@ INTEGRATION_TESTS = [
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "encapsulation",
"Description": "Overlay Encapsulation Continuous Stream",
+ "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
},
{
"Name": "overlay_p2p_decap_tput",
@@ -355,6 +358,7 @@ INTEGRATION_TESTS = [
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Throughput RFC2544 Test",
+ "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
},
{
"Name": "overlay_p2p_decap_cont",
@@ -364,6 +368,7 @@ INTEGRATION_TESTS = [
"Tunnel Type": SUPPORTED_TUNNELING_PROTO[0],
"Tunnel Operation": "decapsulation",
"Description": "Overlay Decapsulation Continuous Stream",
+ "Parameters": {'TRAFFICGEN_IXNET_TCL_SCRIPT' : 'ixnetrfc2544v2.tcl'},
},
{
"Name": "vswitch_add_del_bridge",
@@ -747,7 +752,9 @@ INTEGRATION_TESTS = [
{
# Topology: 2 Parallel PVP connections
# To run a Linux bridge as a loopback in the Guest use:
- # --test-params "guest_loopback=linux_bridge" --integration 2pvp_udp_dest_flows
+ # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 2pvp_udp_dest_flows
+ # or add "Parameters" option to the test definition:
+ # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "2pvp_udp_dest_flows",
"Description": "Continuous TC with 2 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
@@ -768,7 +775,9 @@ INTEGRATION_TESTS = [
{
# Topology: 4 Parallel PVP connections
# To run a Linux bridge as a loopback in the Guest use:
- # --test-params "guest_loopback=linux_bridge" --integration 4pvp_udp_dest_flows
+ # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 4pvp_udp_dest_flows
+ # or add "Parameters" option to the test definition:
+ # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "4pvp_udp_dest_flows",
"Description": "Continuous TC with 4 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
@@ -793,7 +802,9 @@ INTEGRATION_TESTS = [
{
# Topology: 6 Parallel PVP connections
# To run a Linux bridge as a loopback in the Guest use:
- # --test-params "guest_loopback=linux_bridge" --integration 6pvp_udp_dest_flows
+ # --test-params "GUEST_LOOPBACK=['linux_bridge']" --integration 6pvp_udp_dest_flows
+ # or add "Parameters" option to the test definition:
+ # "Parameters" : {'GUEST_LOOPBACK' : ['linux_bridge'],},
"Name": "6pvp_udp_dest_flows",
"Description": "Continuous TC with 6 Parallel VMs, flows on UDP Dest Port",
"Deployment": "clean",
@@ -901,7 +912,7 @@ INTEGRATION_TESTS = [
# "vSwitch" : "OvsVanilla",
# "VNF" : "QemuVirtioNet",
# "Trafficgen": "IxNet",
-# "Parameters": {"guest_loopback" : "linux_bridge"},
+# "Parameters": {"GUEST_LOOPBACK" : ["linux_bridge"],},
# "TestSteps": STEP_VSWITCH_PVP_FLOWS_INIT +
# [
# ['vnf', 'start'],
diff --git a/conf/integration/03_traffic.conf b/conf/integration/03_traffic.conf
index 0b46cea0..e78e2668 100644
--- a/conf/integration/03_traffic.conf
+++ b/conf/integration/03_traffic.conf
@@ -18,9 +18,6 @@ TRAFFICGEN_PORT2_MAC = '02:00:00:00:00:02'
TRAFFICGEN_PORT1_IP = '1.1.1.1'
TRAFFICGEN_PORT2_IP = '90.90.90.90'
-# To test VXLAN set the ff to ixnetrfc2544v2.tcl
-TRAFFICGEN_IXNET_TCL_SCRIPT = 'ixnetrfc2544v2.tcl'
-
# VXLAN traffic item
VXLAN_VNI = '99'
diff --git a/core/traffic_controller.py b/core/traffic_controller.py
index a6c1bd8d..b1911536 100644
--- a/core/traffic_controller.py
+++ b/core/traffic_controller.py
@@ -21,7 +21,6 @@ import time
from core.results.results_constants import ResultsConstants
from conf import settings
-from conf import get_test_param
class TrafficController(object):
"""Base class which defines a common functionality for all traffic
@@ -41,21 +40,13 @@ class TrafficController(object):
self._traffic_gen_class = traffic_gen_class()
self._traffic_started = False
self._traffic_started_call_count = 0
- self._duration = int(get_test_param('duration', 30))
- self._lossrate = float(get_test_param('lossrate', 0.0))
+ self._duration = int(settings.getValue('TRAFFICGEN_DURATION'))
+ self._lossrate = float(settings.getValue('TRAFFICGEN_LOSSRATE'))
+ self._packet_sizes = settings.getValue('TRAFFICGEN_PKT_SIZES')
+
self._mode = settings.getValue('mode').lower()
self._results = []
- # If set, comma separated packet_sizes value from --test_params
- # on cli takes precedence over value in settings file.
- self._packet_sizes = None
- packet_sizes_cli = get_test_param('pkt_sizes')
- if packet_sizes_cli:
- self._packet_sizes = [int(x.strip())
- for x in packet_sizes_cli.split(',')]
- else:
- self._packet_sizes = settings.getValue('TRAFFICGEN_PKT_SIZES')
-
def __enter__(self):
"""Call initialisation function.
"""
diff --git a/core/traffic_controller_rfc2544.py b/core/traffic_controller_rfc2544.py
index 874c3ae7..980205f6 100644
--- a/core/traffic_controller_rfc2544.py
+++ b/core/traffic_controller_rfc2544.py
@@ -15,7 +15,7 @@
"""
from core.traffic_controller import TrafficController
from core.results.results import IResults
-from conf import get_test_param
+from conf import settings
class TrafficControllerRFC2544(TrafficController, IResults):
@@ -32,7 +32,7 @@ class TrafficControllerRFC2544(TrafficController, IResults):
"""
super(TrafficControllerRFC2544, self).__init__(traffic_gen_class)
self._type = 'rfc2544'
- self._tests = int(get_test_param('rfc2544_tests', 1))
+ self._tests = int(settings.getValue('TRAFFICGEN_RFC2544_TESTS'))
def send_traffic(self, traffic):
"""See TrafficController for description
@@ -85,4 +85,3 @@ class TrafficControllerRFC2544(TrafficController, IResults):
result = self._traffic_gen_class.wait_rfc2544_throughput()
result = self._append_results(result, packet_size)
self._results.append(result)
-
diff --git a/core/traffic_controller_rfc2889.py b/core/traffic_controller_rfc2889.py
index a2e12e6d..210d5f5f 100644
--- a/core/traffic_controller_rfc2889.py
+++ b/core/traffic_controller_rfc2889.py
@@ -15,7 +15,7 @@
"""
from core.traffic_controller import TrafficController
from core.results.results import IResults
-from conf import get_test_param
+from conf import settings
class TrafficControllerRFC2889(TrafficController, IResults):
@@ -32,7 +32,7 @@ class TrafficControllerRFC2889(TrafficController, IResults):
"""
super(TrafficControllerRFC2889, self).__init__(traffic_gen_class)
self._type = 'rfc2889'
- self._trials = int(get_test_param('rfc2889_trials', 1))
+ self._trials = int(settings.getValue('TRAFFICGEN_RFC2889_TRIALS'))
def send_traffic(self, traffic):
"""See TrafficController for description
@@ -83,7 +83,6 @@ class TrafficControllerRFC2889(TrafficController, IResults):
else:
function['function']()
result = self._traffic_gen_class.wait_rfc2889_forwarding(
- traffic, trials=self._trials, duration=self._duration)
+ traffic, trials=self._trials, duration=self._duration)
result = self._append_results(result, packet_size)
self._results.append(result)
-
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index 85fc35b8..efcc4d83 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -69,7 +69,7 @@ OR from the commandline:
.. code-block:: console
- $ ./vsperf --test-params "pkt_sizes=x,y" $TESTNAME
+ $ ./vsperf --test-params "TRAFFICGEN_PKT_SIZES=(x,y)" $TESTNAME
You can also modify the traffic transmission duration and the number
of tests run by the traffic generator by extending the example
@@ -77,7 +77,8 @@ commandline above to:
.. code-block:: console
- $ ./vsperf --test-params "pkt_sizes=x,y;duration=10;rfc2544_tests=1" $TESTNAME
+ $ ./vsperf --test-params "TRAFFICGEN_PKT_SIZES=(x,y);TRAFFICGEN_DURATION=10;" \
+ "TRAFFICGEN_RFC2544_TESTS=1" $TESTNAME
Dummy Setup
------------
diff --git a/docs/design/vswitchperf_design.rst b/docs/design/vswitchperf_design.rst
index 375fa12e..88b6ba88 100755
--- a/docs/design/vswitchperf_design.rst
+++ b/docs/design/vswitchperf_design.rst
@@ -53,7 +53,8 @@ for development purposes:
.. code-block:: console
- $ ./vsperf --test-params 'duration=10;rfc2544_tests=1;pkt_sizes=64' --tests 'pvp_tput'
+ $ ./vsperf --test-params 'TRAFFICGEN_DURATION=10;TRAFFICGEN_RFC2544_TESTS=1;' \
+ 'TRAFFICGEN_PKT_SIZES=(64,)' pvp_tput
Typical Test Sequence
=====================
diff --git a/docs/requirements/vswitchperf_ltp.rst b/docs/requirements/vswitchperf_ltp.rst
index 6b2ee9bc..14303de5 100644
--- a/docs/requirements/vswitchperf_ltp.rst
+++ b/docs/requirements/vswitchperf_ltp.rst
@@ -1304,7 +1304,7 @@ vsperf CI jobs are broken down into:
* Runs everyday takes about 10 hours to complete.
* TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan
phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'.
- * TESTPARAM_DAILY='--test-params pkt_sizes=64,128,512,1024,1518'.
+ * TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'.
* Merge job:
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index 5b26a716..003e8adb 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -81,21 +81,21 @@ To run VXLAN encapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=vxlan' overlay_p2p_tput
To run GRE encapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=gre' overlay_p2p_tput
To run GENEVE encapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=geneve' overlay_p2p_tput
To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
@@ -127,7 +127,7 @@ To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=vxlan' overlay_p2p_tput
@@ -189,7 +189,7 @@ To run GRE decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=gre'
+ ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=gre' \
--integration overlay_p2p_decap_cont
@@ -246,7 +246,7 @@ To run GENEVE decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve'
+ ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve' \
--integration overlay_p2p_decap_cont
@@ -330,7 +330,7 @@ To run VXLAN decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=vxlan' overlay_p2p_decap_cont
Executing Native/Vanilla OVS GRE decapsulation tests
@@ -389,7 +389,7 @@ To run GRE decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=gre' overlay_p2p_decap_cont
Executing Native/Vanilla OVS GENEVE decapsulation tests
@@ -448,7 +448,7 @@ To run GENEVE decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
--test-params 'tunnel_type=geneve' overlay_p2p_decap_cont
@@ -498,5 +498,5 @@ To run VXLAN encapsulation+decapsulation tests:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --integration
+ ./vsperf --conf-file user_settings.py --integration \
overlay_p2p_mod_tput
diff --git a/docs/userguide/teststeps.rst b/docs/userguide/teststeps.rst
index 51e62020..65a25b0a 100644
--- a/docs/userguide/teststeps.rst
+++ b/docs/userguide/teststeps.rst
@@ -523,8 +523,8 @@ To run the test:
.. code-block:: console
- ./vsperf --conf-file user_settings.py --test-params
- "guest_loopback=linux_bridge" --integration ex_pvp_rule_l3da
+ ./vsperf --conf-file user_settings.py --test-params \
+ "GUEST_LOOPBACK=['linux_bridge']" --integration ex_pvp_rule_l3da
Forward packets based on UDP port
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 97c74721..f446f261 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -105,14 +105,61 @@ or via another command line argument will override both the default and
your custom configuration files. This "priority hierarchy" can be
described like so (1 = max priority):
-1. Command line arguments
-2. Environment variables
-3. Configuration file(s)
+1. Testcase definition section ``Parameters``
+2. Command line arguments
+3. Environment variables
+4. Configuration file(s)
Further details about configuration files evaluation and special behaviour
of options with ``GUEST_`` prefix could be found at `design document
<http://artifacts.opnfv.org/vswitchperf/docs/design/vswitchperf_design.html#configuration>`__.
+Overriding values defined in configuration files
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The configuration items can be overridden by command line argument
+``--test-params``. In this case, the configuration items and
+their values should be passed in form of ``item=value`` and separated
+by semicolon.
+
+Example:
+
+.. code:: console
+
+ $ ./vsperf --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,);" \
+ "GUEST_LOOPBACK=['testpmd','l2fwd']" pvvp_tput
+
+The second option is to override configuration items by ``Parameters`` section
+of the test case definition. The configuration items can be added into ``Parameters``
+dictionary with their new values. These values will override values defined in
+configuration files or specified by ``--test-params`` command line argument.
+
+Example:
+
+.. code:: python
+
+ "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (128,),
+ 'TRAFFICGEN_DURATION' : 10,
+ 'GUEST_LOOPBACK' : ['testpmd','l2fwd'],
+ }
+
+**NOTE:** In both cases, configuration item names and their values must be specified
+in the same form as they are defined inside configuration files. Parameter names
+must be specified in uppercase and data types of original and new value must match.
+Python syntax rules related to data types and structures must be followed.
+For example, parameter ``TRAFFICGEN_PKT_SIZES`` above is defined as a tuple
+with a single value ``128``. In this case trailing comma is mandatory, otherwise
+value can be wrongly interpreted as a number instead of a tuple and vsperf
+execution would fail. Please check configuration files for default values and their
+types and use them as a basis for any customized values. In case of any doubt, please
+check official python documentation related to data structures like tuples, lists
+and dictionaries.
+
+**NOTE:** Vsperf execution will terminate with runtime error in case, that unknown
+parameter name is passed via ``--test-params`` CLI argument or defined in ``Parameters``
+section of test case definition. It is also forbidden to redefine a value of
+``TEST_PARAMS`` configuration item via CLI or ``Parameters`` section.
+
vloop_vnf
^^^^^^^^^
@@ -192,9 +239,9 @@ Some tests allow for configurable parameters, including test duration
.. code:: bash
- $ ./vsperf --conf-file user_settings.py
- --tests RFC2544Tput
- --test-params "duration=10;pkt_sizes=128"
+ $ ./vsperf --conf-file user_settings.py \
+ --tests RFC2544Tput \
+ --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,)"
For all available options, check out the help dialog:
@@ -283,9 +330,11 @@ To run tests using Vanilla OVS:
.. code-block:: console
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
- --test-params "vanilla_tgen_tx_ip=n.n.n.n;
- vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
+ --test-params "VANILLA_TGEN_PORT1_IP=n.n.n.n;" \
+ "VANILLA_TGEN_PORT1_MAC=nn:nn:nn:nn:nn:nn;" \
+ "VANILLA_TGEN_PORT2_IP=n.n.n.n;" \
+ "VANILLA_TGEN_PORT2_MAC=nn:nn:nn:nn:nn:nn"
2. If needed, recompile src for all OVS variants
@@ -389,7 +438,7 @@ Execution of test with PCI passthrough with vswitch disabled:
.. code-block:: console
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
--vswitch none --vnf QemuPciPassthrough pvp_tput
Any of supported guest-loopback-application_ can be used inside VM with
@@ -414,8 +463,8 @@ or use ``--test-params`` CLI argument:
.. code-block:: console
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
- --test-params "guest_loopback=testpmd"
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
+ --test-params "GUEST_LOOPBACK=['testpmd']"
Supported loopback applications are:
@@ -549,15 +598,6 @@ environment.
on the same numa as the NIC in use if possible/applicable. Testpmd should be
assigned at least (nb_cores +1) total cores with the cpu mask.
-The following CLI parameters override the corresponding configuration settings:
-
-1. ``guest_nic_queues``, which overrides all ``GUEST_NIC_QUEUES`` values
-2. ``guest_testpmd_params``, which overrides all ``GUEST_TESTPMD_PARAMS``
- values
-3. ``vswitch_dpdk_multi_queues``, which overrides ``VSWITCH_DPDK_MULTI_QUEUES``
-4. ``guest_smp``, which overrides all ``GUEST_SMP`` values
-5. ``guest_core_binding``, which overrides all ``GUEST_CORE_BINDING`` values
-
Executing Packet Forwarding tests
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -573,8 +613,8 @@ or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
.. code-block:: console
- $ ./vsperf --conf-file user_settings.py
- --vswitch none
+ $ ./vsperf --conf-file user_settings.py \
+ --vswitch none \
--fwdapp TestPMD
Supported Packet Forwarding applications are:
@@ -629,7 +669,7 @@ Mode of operation is driven by configuration parameter -m or --mode
"trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission
In case, that VSPERF is executed in "trafficgen" mode, then configuration
-of traffic generator should be configured through --test-params option.
+of traffic generator should be configured through ``--test-params`` option.
Supported CLI options useful for traffic generator configuration are:
.. code-block:: console
@@ -656,7 +696,7 @@ Example of execution of VSPERF in "trafficgen" mode:
.. code-block:: console
- $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf
+ $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \
--test-params "traffic_type=continuous;bidirectional=True;iload=60"
Code change verification by pylint
diff --git a/testcases/testcase.py b/testcases/testcase.py
index 00164ea2..01a07391 100644
--- a/testcases/testcase.py
+++ b/testcases/testcase.py
@@ -66,6 +66,7 @@ class TestCase(object):
self._step_vnf_list = {}
self._step_result = []
self._step_status = None
+ self._testcase_run_time = None
# store all GUEST_ specific settings to keep original values before their expansion
for key in S.__dict__:
@@ -75,14 +76,21 @@ class TestCase(object):
self._update_settings('VSWITCH', cfg.get('vSwitch', S.getValue('VSWITCH')))
self._update_settings('VNF', cfg.get('VNF', S.getValue('VNF')))
self._update_settings('TRAFFICGEN', cfg.get('Trafficgen', S.getValue('TRAFFICGEN')))
- self._update_settings('TEST_PARAMS', cfg.get('Parameters', S.getValue('TEST_PARAMS')))
+ test_params = copy.deepcopy(S.getValue('TEST_PARAMS'))
+ tc_test_params = cfg.get('Parameters', S.getValue('TEST_PARAMS'))
+ test_params.update(tc_test_params)
+ self._update_settings('TEST_PARAMS', test_params)
+ S.check_test_params()
+
+ # override all redefined GUEST_ values to have them expanded correctly
+ tmp_test_params = copy.deepcopy(S.getValue('TEST_PARAMS'))
+ for key in tmp_test_params:
+ if key.startswith('GUEST_'):
+ S.setValue(key, S.getValue(key))
+ S.getValue('TEST_PARAMS').pop(key)
# update global settings
functions.settings_update_paths()
- guest_loopback = get_test_param('guest_loopback', None)
- if guest_loopback:
- # we can put just one item, it'll be expanded automatically for all VMs
- self._update_settings('GUEST_LOOPBACK', [guest_loopback])
# set test parameters; CLI options take precedence to testcase settings
self._logger = logging.getLogger(__name__)
@@ -337,7 +345,8 @@ class TestCase(object):
self.run_finalize()
self._testcase_run_time = time.strftime("%H:%M:%S",
- time.gmtime(time.time() - self._testcase_start_time))
+ time.gmtime(time.time() -
+ self._testcase_start_time))
logging.info("Testcase execution time: " + self._testcase_run_time)
# report test results
self.run_report()
@@ -352,7 +361,7 @@ class TestCase(object):
"""
orig_value = S.getValue(param)
if orig_value != value:
- self._settings_original[param] = orig_value
+ self._settings_original[param] = copy.deepcopy(orig_value)
S.setValue(param, value)
def _append_results(self, results):
diff --git a/tools/pkt_gen/ixnet/ixnet.py b/tools/pkt_gen/ixnet/ixnet.py
index 52ba1712..6262a10a 100755
--- a/tools/pkt_gen/ixnet/ixnet.py
+++ b/tools/pkt_gen/ixnet/ixnet.py
@@ -151,13 +151,17 @@ class IxNet(trafficgen.ITrafficGenerator):
Currently only the RFC2544 tests are implemented.
"""
- _script = os.path.join(settings.getValue('TRAFFICGEN_IXIA_3RD_PARTY'),
- settings.getValue('TRAFFICGEN_IXNET_TCL_SCRIPT'))
- _tclsh = tkinter.Tcl()
- _cfg = None
- _logger = logging.getLogger(__name__)
- _params = None
- _bidir = None
+
+ def __init__(self):
+ """Initialize IXNET members
+ """
+ self._script = os.path.join(settings.getValue('TRAFFICGEN_IXIA_3RD_PARTY'),
+ settings.getValue('TRAFFICGEN_IXNET_TCL_SCRIPT'))
+ self._tclsh = tkinter.Tcl()
+ self._cfg = None
+ self._logger = logging.getLogger(__name__)
+ self._params = None
+ self._bidir = None
def run_tcl(self, cmd):
"""Run a TCL script using the TCL interpreter found in ``tkinter``.
diff --git a/vnfs/qemu/qemu.py b/vnfs/qemu/qemu.py
index 51553277..997f93e0 100644
--- a/vnfs/qemu/qemu.py
+++ b/vnfs/qemu/qemu.py
@@ -24,7 +24,6 @@ import time
import pexpect
from conf import settings as S
-from conf import get_test_param
from vnfs.vnf.vnf import IVnf
class IVnfQemu(IVnf):
@@ -69,7 +68,6 @@ class IVnfQemu(IVnf):
self._nics = S.getValue('GUEST_NICS')[self._number][:nics_nr]
# set guest loopback application based on VNF configuration
- # cli option take precedence to config file values
self._guest_loopback = S.getValue('GUEST_LOOPBACK')[self._number]
self._testpmd_fwd_mode = S.getValue('GUEST_TESTPMD_FWD_MODE')[self._number]
@@ -81,11 +79,6 @@ class IVnfQemu(IVnf):
self._testpmd_fwd_mode, 'io')
self._testpmd_fwd_mode = 'io'
- guest_smp = int(get_test_param('guest_smp', 0))
- if guest_smp:
- override_list = [guest_smp] * (self._number + 1)
- S.setValue('GUEST_SMP', override_list)
-
name = 'Client%d' % self._number
vnc = ':%d' % self._number
# NOTE: affinization of main qemu process can cause hangup of 2nd VM
@@ -238,18 +231,14 @@ class IVnfQemu(IVnf):
stdin=proc.stdout)
proc.wait()
- guest_core_binding = int(get_test_param('guest_core_binding', 0))
for cpu in range(0, int(S.getValue('GUEST_SMP')[self._number])):
match = None
for line in output.decode(cur_locale).split('\n'):
match = re.search(thread_id % cpu, line)
if match:
- if guest_core_binding:
- self._affinitize_pid(guest_core_binding, match.group(1))
- else:
- self._affinitize_pid(
- S.getValue('GUEST_CORE_BINDING')[self._number][cpu],
- match.group(1))
+ self._affinitize_pid(
+ S.getValue('GUEST_CORE_BINDING')[self._number][cpu],
+ match.group(1))
break
if not match:
@@ -397,10 +386,9 @@ class IVnfQemu(IVnf):
self.execute_and_wait('make')
# get testpmd settings from CLI
- testpmd_params = get_test_param('guest_testpmd_params',
- S.getValue('GUEST_TESTPMD_PARAMS')[self._number])
+ testpmd_params = S.getValue('GUEST_TESTPMD_PARAMS')[self._number]
- self.execute_and_wait( './testpmd {}'.format(testpmd_params), 60, "Done")
+ self.execute_and_wait('./testpmd {}'.format(testpmd_params), 60, "Done")
self.execute('set fwd ' + self._testpmd_fwd_mode, 1)
self.execute_and_wait('start', 20, 'testpmd>')
@@ -458,17 +446,13 @@ class IVnfQemu(IVnf):
# Add the arp entries for the IXIA ports and the bridge you are using.
# Use command line values if provided.
- trafficgen_mac = get_test_param('vanilla_tgen_port1_mac',
- S.getValue('VANILLA_TGEN_PORT1_MAC'))
- trafficgen_ip = get_test_param('vanilla_tgen_port1_ip',
- S.getValue('VANILLA_TGEN_PORT1_IP'))
+ trafficgen_mac = S.getValue('VANILLA_TGEN_PORT1_MAC')
+ trafficgen_ip = S.getValue('VANILLA_TGEN_PORT1_IP')
self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac)
- trafficgen_mac = get_test_param('vanilla_tgen_port2_mac',
- S.getValue('VANILLA_TGEN_PORT2_MAC'))
- trafficgen_ip = get_test_param('vanilla_tgen_port2_ip',
- S.getValue('VANILLA_TGEN_PORT2_IP'))
+ trafficgen_mac = S.getValue('VANILLA_TGEN_PORT2_MAC')
+ trafficgen_ip = S.getValue('VANILLA_TGEN_PORT2_IP')
self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac)
diff --git a/vnfs/qemu/qemu_dpdk_vhost_user.py b/vnfs/qemu/qemu_dpdk_vhost_user.py
index a25c61ef..51c10242 100644
--- a/vnfs/qemu/qemu_dpdk_vhost_user.py
+++ b/vnfs/qemu/qemu_dpdk_vhost_user.py
@@ -18,7 +18,6 @@
import logging
from conf import settings as S
-from conf import get_test_param
from vnfs.qemu.qemu import IVnfQemu
class QemuDpdkVhostUser(IVnfQemu):
@@ -33,10 +32,6 @@ class QemuDpdkVhostUser(IVnfQemu):
self._logger = logging.getLogger(__name__)
# multi-queue values
- guest_nic_queues = int(get_test_param('guest_nic_queues', 0))
- if guest_nic_queues:
- override_list = [guest_nic_queues] * (self._number + 1)
- S.setValue('GUEST_NIC_QUEUES', override_list)
if int(S.getValue('GUEST_NIC_QUEUES')[self._number]):
queue_str = ',queues={}'.format(S.getValue('GUEST_NIC_QUEUES')[self._number])
mq_vector_str = ',mq=on,vectors={}'.format(
diff --git a/vsperf b/vsperf
index 5bfa2abe..ee494dcd 100755
--- a/vsperf
+++ b/vsperf
@@ -21,6 +21,7 @@ import logging
import os
import sys
import argparse
+import re
import time
import datetime
import shutil
@@ -75,21 +76,19 @@ def parse_arguments():
This expects either 'x=y', 'x=y,z' or 'x' (implicit true)
values. For multiple overrides use a ; separated list for
- e.g. --test-params 'x=z; y=a,b'
+ e.g. --test-params 'x=z; y=(a,b)'
"""
def __call__(self, parser, namespace, values, option_string=None):
results = {}
- for value in values.split(';'):
- result = [key.strip() for key in value.split('=')]
- if len(result) == 1:
- results[result[0]] = True
- elif len(result) == 2:
- results[result[0]] = result[1]
- else:
- raise argparse.ArgumentTypeError(
- 'expected \'%s\' to be of format \'key=val\' or'
- ' \'key\'' % result)
+ for param, _, value in re.findall('([^;=]+)(=([^;]+))?', values):
+ param = param.strip()
+ value = value.strip()
+ if len(param):
+ if len(value):
+ results[param] = value
+ else:
+ results[param] = True
setattr(namespace, self.dest, results)
@@ -181,9 +180,9 @@ def parse_arguments():
group.add_argument('--conf-file', action=_ValidateFileAction,
help='settings file')
group.add_argument('--test-params', action=_SplitTestParamsAction,
- help='csv list of test parameters: key=val; e.g.'
- 'including pkt_sizes=x,y; duration=x; '
- 'rfc2544_tests=x ...')
+ help='csv list of test parameters: key=val; e.g. '
+ 'TRAFFICGEN_PKT_SIZES=(64,128);TRAFICGEN_DURATION=30; '
+ 'GUEST_LOOPBACK=["l2fwd"] ...')
group.add_argument('--opnfvpod', help='name of POD in opnfv')
args = vars(parser.parse_args())
@@ -585,14 +584,6 @@ def main():
# for backward compatibility
settings.setValue('WHITELIST_NICS', list(nic['pci'] for nic in nic_list))
- # update global settings
- guest_loopback = get_test_param('guest_loopback', None)
- if guest_loopback:
- tmp_gl = []
- for dummy_i in range(len(settings.getValue('GUEST_LOOPBACK'))):
- tmp_gl.append(guest_loopback)
- settings.setValue('GUEST_LOOPBACK', tmp_gl)
-
settings.setValue('mode', args['mode'])
# generate results directory name
@@ -612,11 +603,11 @@ def main():
loader = Loader()
# set traffic details, so they can be passed to traffic ctl
traffic = copy.deepcopy(TRAFFIC_DEFAULTS)
- traffic.update({'traffic_type': get_test_param('traffic_type', 'rfc2544'),
- 'bidir': get_test_param('bidirectional', 'False'),
- 'multistream': int(get_test_param('multistream', 0)),
- 'stream_type': get_test_param('stream_type', 'L4'),
- 'frame_rate': int(get_test_param('iload', 100))})
+ traffic.update({'traffic_type': get_test_param('traffic_type', TRAFFIC_DEFAULTS['traffic_type']),
+ 'bidir': get_test_param('bidirectional', TRAFFIC_DEFAULTS['bidir']),
+ 'multistream': int(get_test_param('multistream', TRAFFIC_DEFAULTS['multistream'])),
+ 'stream_type': get_test_param('stream_type', TRAFFIC_DEFAULTS['stream_type']),
+ 'frame_rate': int(get_test_param('iload', TRAFFIC_DEFAULTS['frame_rate']))})
traffic_ctl = component_factory.create_traffic(
traffic['traffic_type'],
diff --git a/vswitches/ovs_dpdk_vhost.py b/vswitches/ovs_dpdk_vhost.py
index 5beb0051..67011d20 100644
--- a/vswitches/ovs_dpdk_vhost.py
+++ b/vswitches/ovs_dpdk_vhost.py
@@ -17,12 +17,10 @@
import logging
import subprocess
-import os
from src.ovs import OFBridge
from src.dpdk import dpdk
from conf import settings
-from conf import get_test_param
from vswitches.ovs import IVSwitchOvs
class OvsDpdkVhost(IVSwitchOvs):
@@ -70,11 +68,6 @@ class OvsDpdkVhost(IVSwitchOvs):
dpdk.init()
super(OvsDpdkVhost, self).start()
# old style OVS <= 2.5.0 multi-queue enable
- vswitch_dpdk_multi_queues = \
- int(get_test_param('vswitch_dpdk_multi_queues', 0))
- if vswitch_dpdk_multi_queues:
- settings.setValue('VSWITCH_DPDK_MULTI_QUEUES', \
- vswitch_dpdk_multi_queues)
if settings.getValue('OVS_OLD_STYLE_MQ') and \
int(settings.getValue('VSWITCH_DPDK_MULTI_QUEUES')):
tmp_br = OFBridge(timeout=-1)
@@ -120,8 +113,8 @@ class OvsDpdkVhost(IVSwitchOvs):
if int(settings.getValue('VSWITCH_DPDK_MULTI_QUEUES')) and \
not settings.getValue('OVS_OLD_STYLE_MQ'):
- params += ['options:n_rxq={}'.format(
- settings.getValue('VSWITCH_DPDK_MULTI_QUEUES'))]
+ params += ['options:n_rxq={}'.format(
+ settings.getValue('VSWITCH_DPDK_MULTI_QUEUES'))]
of_port = bridge.add_port(port_name, params)
return (port_name, of_port)