aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--conf/02_vswitch.conf4
-rw-r--r--conf/03_traffic.conf12
-rw-r--r--conf/04_vnf.conf15
-rw-r--r--conf/10_custom.conf14
-rw-r--r--core/traffic_controller_rfc2544.py5
-rw-r--r--docs/configguide/trafficgen.rst45
-rwxr-xr-xdocs/userguide/testusage.rst58
-rw-r--r--tools/pkt_gen/moongen/__init__.py13
-rw-r--r--tools/pkt_gen/moongen/moongen.py753
-rw-r--r--tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py11
-rw-r--r--tools/pkt_gen/testcenter/testcenter.py120
-rw-r--r--tools/pkt_gen/xena/profiles/baseconfig.x25442
-rwxr-xr-xtools/pkt_gen/xena/xena.py57
-rw-r--r--tools/pkt_gen/xena/xena_json.py39
-rw-r--r--vnfs/qemu/qemu.py19
-rw-r--r--vnfs/qemu/qemu_dpdk_vhost_user.py19
-rw-r--r--vswitches/ovs_dpdk_vhost.py10
17 files changed, 1148 insertions, 48 deletions
diff --git a/conf/02_vswitch.conf b/conf/02_vswitch.conf
index 7f9daf1c..79f0afbd 100644
--- a/conf/02_vswitch.conf
+++ b/conf/02_vswitch.conf
@@ -84,6 +84,10 @@ VSWITCHD_DPDK_CONFIG = {
# Note: VSPERF will automatically detect, which type of DPDK configuration should
# be used.
+# To enable multi queue modify the below param to the number of queues.
+# 0 = disabled
+VSWITCH_MULTI_QUEUES = 0
+
# parameters passed to ovs-vswitchd in case that OvsVanilla is selected
VSWITCHD_VANILLA_ARGS = []
diff --git a/conf/03_traffic.conf b/conf/03_traffic.conf
index 9937294b..01e3e5cf 100644
--- a/conf/03_traffic.conf
+++ b/conf/03_traffic.conf
@@ -28,6 +28,7 @@ TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
+#TRAFFICGEN = 'MoonGen'
# List of packet sizes to send.
# Expand like this: (64, 128, 256, 512, 1024)
@@ -177,3 +178,14 @@ TRAFFICGEN_XENA_PORT0_GATEWAY = '192.168.199.1'
TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
+
+###################################################
+# MoonGen Configuration and Connection Info-- BEGIN
+
+TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ''
+TRAFFICGEN_MOONGEN_USER = ''
+TRAFFICGEN_MOONGEN_BASE_DIR = ''
+TRAFFICGEN_MOONGEN_PORTS = ''
+
+# MoonGen Configuration and Connection Info-- END
+###################################################
diff --git a/conf/04_vnf.conf b/conf/04_vnf.conf
index 926ea50a..0a80c1af 100644
--- a/conf/04_vnf.conf
+++ b/conf/04_vnf.conf
@@ -98,10 +98,25 @@ GUEST_SMP = ['2', '2']
# For 2 VNFs you may use [(4,5), (6, 7)]
GUEST_CORE_BINDING = [(6, 7), (9, 10)]
+# Queues per NIC inside guest for multi-queue configuration, requires switch
+# multi-queue to be enabled. Set to 0 for disabled.
+GUEST_NIC_QUEUES = 0
+
GUEST_START_TIMEOUT = 120
GUEST_OVS_DPDK_DIR = '/root/ovs_dpdk'
OVS_DPDK_SHARE = '/mnt/ovs_dpdk_share'
+# Set the CPU mask for testpmd loopback. To bind to specific guest CPUs use -l
+# GUEST_TESTPMD_CPU_MASK = '-l 0,1'
+GUEST_TESTPMD_CPU_MASK = '-c 0x3'
+
+# Testpmd multi-core config. Leave at 0's for disabled. Will not enable unless
+# GUEST_NIC_QUEUES are > 0. For bi directional traffic NB_CORES must be equal
+# to (RXQ + TXQ).
+GUEST_TESTPMD_NB_CORES = 0
+GUEST_TESTPMD_TXQ = 0
+GUEST_TESTPMD_RXQ = 0
+
# IP addresses to use for Vanilla OVS PVP testing
# Consider using RFC 2544/3330 recommended IP addresses for benchmark testing.
# Network: 198.18.0.0/15
diff --git a/conf/10_custom.conf b/conf/10_custom.conf
index 4c9341a4..4ffe470e 100644
--- a/conf/10_custom.conf
+++ b/conf/10_custom.conf
@@ -20,6 +20,7 @@ TRAFFICGEN = 'Dummy'
#TRAFFICGEN = 'IxNet'
#TRAFFICGEN = 'Ixia'
#TRAFFICGEN = 'Xena'
+#TRAFFICGEN = 'MoonGen'
###########################################
# Spirent TestCenter Configuration -- BEGIN
@@ -78,8 +79,19 @@ TRAFFICGEN_XENA_PORT1_IP = '192.168.199.11'
TRAFFICGEN_XENA_PORT1_CIDR = 24
TRAFFICGEN_XENA_PORT1_GATEWAY = '192.168.199.1'
-TEST_PARAMS = {'pkt_sizes':'64'}
+###################################################
+# MoonGen Configuration and Connection Info-- BEGIN
+# Ex: TRAFFICGEN_MOONGEN_HOST_IP_ADDR = "192.10.1.1"
+TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ""
+TRAFFICGEN_MOONGEN_USER = "root"
+TRAFFICGEN_MOONGEN_BASE_DIR = "/root/MoonGen"
+TRAFFICGEN_MOONGEN_PORTS = "{0,1}"
+
+# MoonGen Configuration and Connection Info-- END
+###################################################
+
+#TEST_PARAMS = {'pkt_sizes':'64'}
OPNFV_INSTALLER = "Fuel"
OPNFV_URL = "http://testresults.opnfv.org/testapi"
PACKAGE_LIST = "src/package-list.mk"
diff --git a/core/traffic_controller_rfc2544.py b/core/traffic_controller_rfc2544.py
index 2630101f..81e499cd 100644
--- a/core/traffic_controller_rfc2544.py
+++ b/core/traffic_controller_rfc2544.py
@@ -41,6 +41,7 @@ class TrafficControllerRFC2544(ITrafficController, IResults):
self._traffic_started_call_count = 0
self._trials = int(get_test_param('rfc2544_trials', 1))
self._duration = int(get_test_param('duration', 30))
+ self._lossrate = float(get_test_param('lossrate', 0.0))
self._results = []
# If set, comma separated packet_sizes value from --test_params
@@ -100,13 +101,13 @@ class TrafficControllerRFC2544(ITrafficController, IResults):
if traffic['traffic_type'] == 'back2back':
result = self._traffic_gen_class.send_rfc2544_back2back(
- traffic, trials=self._trials, duration=self._duration)
+ traffic, trials=self._trials, duration=self._duration, lossrate=self._lossrate)
elif traffic['traffic_type'] == 'continuous':
result = self._traffic_gen_class.send_cont_traffic(
traffic, duration=self._duration)
else:
result = self._traffic_gen_class.send_rfc2544_throughput(
- traffic, trials=self._trials, duration=self._duration)
+ traffic, trials=self._trials, duration=self._duration, lossrate=self._lossrate)
result = TrafficControllerRFC2544._append_results(result,
packet_size)
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index f612569f..63560b9c 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -15,6 +15,7 @@ VSPERF supports the following traffic generators:
* IXIA (IxNet and IxOS)
* Spirent TestCenter
* Xena Networks
+ * MoonGen
To see the list of traffic gens from the cli:
@@ -253,6 +254,8 @@ folder. Contact Xena Networks for the latest version of this file. The user
can also visit www.xenanetworks/downloads to obtain the file with a valid
support contract.
+**Note** VSPerf has been fully tested with version v2.43 of Xena2544.exe
+
To execute the Xena2544.exe file under Linux distributions the mono-complete
package must be installed. To install this package follow the instructions
below. Further information can be obtained from
@@ -287,3 +290,45 @@ set to allow for proper connections to the chassis.
TRAFFICGEN_XENA_PASSWORD = ''
TRAFFICGEN_XENA_MODULE1 = ''
TRAFFICGEN_XENA_MODULE2 = ''
+
+
+MoonGen
+-------
+
+Installation
+~~~~~~~~~~~~
+
+MoonGen architecture overview and general installation instructions
+can be found here:
+
+https://github.com/emmericp/MoonGen
+
+For VSPerf use, MoonGen should be cloned from here (as opposed to the afore
+mentioned GitHub):
+
+git clone https://github.com/atheurer/MoonGen
+
+and use the opnfv-stable branch:
+
+git checkout opnfv-stable
+
+VSPerf uses a particular example script under the examples directory within
+the MoonGen project:
+
+MoonGen/examples/opnfv-vsperf.lua
+
+Follow MoonGen set up instructions here:
+
+https://github.com/atheurer/MoonGen/blob/opnfv-stable/MoonGenSetUp.html
+
+Note one will need to set up ssh login to not use passwords between the server
+running MoonGen and the device under test (running the VSPERF test
+infrastructure). This is because VSPERF on one server uses 'ssh' to
+configure and run MoonGen upon the other server.
+
+One can set up this ssh access by doing the following on both servers:
+
+.. code-block:: console
+
+ ssh-keygen -b 2048 -t rsa
+ ssh-copy-id <other server>
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 104723e3..d807590d 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -437,6 +437,64 @@ Guest loopback application must be configured, otherwise traffic
will not be forwarded by VM and testcases with PVP and PVVP deployments
will fail. Guest loopback application is set to 'testpmd' by default.
+Multi-Queue Configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+VSPerf currently supports multi-queue with the following limitations:
+
+ 1. Execution of pvp/pvvp tests require testpmd as the loopback if multi-queue
+ is enabled at the guest.
+
+ 2. Requires QemuDpdkVhostUser as the vnf.
+
+ 3. Requires switch to be set to OvsDpdkVhost.
+
+ 4. Requires QEMU 2.5 or greater and any OVS version higher than 2.5. The
+ default upstream package versions installed by VSPerf satisfy this
+ requirement.
+
+To enable multi-queue modify the ''02_vswitch.conf'' file to enable multi-queue
+on the switch.
+
+ .. code-block:: console
+
+ VSWITCH_MULTI_QUEUES = 2
+
+**NOTE:** you should consider using the switch affinity to set a pmd cpu mask
+that can optimize your performance. Consider the numa of the NIC in use if this
+applies by checking /sys/class/net/<eth_name>/device/numa_node and setting an
+appropriate mask to create PMD threads on the same numa node.
+
+When multi-queue is enabled, each dpdk or dpdkvhostuser port that is created
+on the switch will set the option for multiple queues.
+
+To enable multi-queue on the guest modify the ''04_vnf.conf'' file.
+
+ .. code-block:: console
+
+ GUEST_NIC_QUEUES = 2
+
+Enabling multi-queue at the guest will add multiple queues to each NIC port when
+qemu launches the guest.
+
+Testpmd should be configured to take advantage of multi-queue on the guest. This
+can be done by modifying the ''04_vnf.conf'' file.
+
+ .. code-block:: console
+
+ GUEST_TESTPMD_CPU_MASK = '-l 0,1,2,3,4'
+
+ GUEST_TESTPMD_NB_CORES = 4
+ GUEST_TESTPMD_TXQ = 2
+ GUEST_TESTPMD_RXQ = 2
+
+**NOTE:** The guest SMP cores must be configured to allow for testpmd to use the
+optimal number of cores to take advantage of the multiple guest queues.
+
+**NOTE:** For optimal performance guest SMPs should be on the same numa as the
+NIC in use if possible/applicable. Testpmd should be assigned at least
+(nb_cores +1) total cores with the cpu mask.
+
Executing Packet Forwarding tests
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
diff --git a/tools/pkt_gen/moongen/__init__.py b/tools/pkt_gen/moongen/__init__.py
new file mode 100644
index 00000000..562eb088
--- /dev/null
+++ b/tools/pkt_gen/moongen/__init__.py
@@ -0,0 +1,13 @@
+# Copyright 2016 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
diff --git a/tools/pkt_gen/moongen/moongen.py b/tools/pkt_gen/moongen/moongen.py
new file mode 100644
index 00000000..d6c09e5d
--- /dev/null
+++ b/tools/pkt_gen/moongen/moongen.py
@@ -0,0 +1,753 @@
+# Copyright 2016 Red Hat Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# Contributors:
+# Bill Michalowski, Red Hat Inc.
+# Andrew Theurer, Red Hat Inc.
+"""
+Moongen Traffic Generator Model
+"""
+
+# python imports
+import logging
+from collections import OrderedDict
+import subprocess
+import re
+
+# VSPerf imports
+from conf import settings
+from core.results.results_constants import ResultsConstants
+from tools.pkt_gen.trafficgen.trafficgenhelper import (
+ TRAFFIC_DEFAULTS,
+ merge_spec)
+from tools.pkt_gen.trafficgen.trafficgen import ITrafficGenerator
+
+class Moongen(ITrafficGenerator):
+ """Moongen Traffic generator wrapper."""
+ _traffic_defaults = TRAFFIC_DEFAULTS.copy()
+ _logger = logging.getLogger(__name__)
+
+ def __init__(self):
+ """Moongen class constructor."""
+ self._logger.info("In moongen __init__ method")
+ self._params = {}
+ self._moongen_host_ip_addr = (
+ settings.getValue('TRAFFICGEN_MOONGEN_HOST_IP_ADDR'))
+ self._moongen_base_dir = (
+ settings.getValue('TRAFFICGEN_MOONGEN_BASE_DIR'))
+ self._moongen_user = settings.getValue('TRAFFICGEN_MOONGEN_USER')
+ self._moongen_ports = settings.getValue('TRAFFICGEN_MOONGEN_PORTS')
+
+ @property
+ def traffic_defaults(self):
+ """Default traffic values.
+
+ These can be expected to be constant across traffic generators,
+ so no setter is provided. Changes to the structure or contents
+ will likely break traffic generator implementations or tests
+ respectively.
+ """
+ self._logger.info("In moongen traffic_defaults method")
+ return self._traffic_defaults
+
+ def create_moongen_cfg_file(self, traffic, duration=60,
+ acceptable_loss_pct=1, one_shot=0):
+ """Create the MoonGen configuration file from VSPERF's traffic profile
+ :param traffic: Detailed "traffic" spec, i.e. IP address, VLAN tags
+ :param duration: The length of time to generate packet throughput
+ :param acceptable_loss: Maximum packet loss acceptable
+ :param one_shot: No RFC 2544 binary search,
+ just packet flow at traffic specifics
+ """
+ logging.debug("traffic['frame_rate'] = " + \
+ str(traffic['frame_rate']))
+
+ logging.debug("traffic['multistream'] = " + \
+ str(traffic['multistream']))
+
+ logging.debug("traffic['stream_type'] = " + \
+ str(traffic['stream_type']))
+
+ logging.debug("traffic['l2']['srcmac'] = " + \
+ str(traffic['l2']['srcmac']))
+
+ logging.debug("traffic['l2']['dstmac'] = " + \
+ str(traffic['l2']['dstmac']))
+
+ logging.debug("traffic['l3']['proto'] = " + \
+ str(traffic['l3']['proto']))
+
+ logging.debug("traffic['l3']['srcip'] = " + \
+ str(traffic['l3']['srcip']))
+
+ logging.debug("traffic['l3']['dstip'] = " + \
+ str(traffic['l3']['dstip']))
+
+ logging.debug("traffic['l4']['srcport'] = " + \
+ str(traffic['l4']['srcport']))
+
+ logging.debug("traffic['l4']['dstport'] = " + \
+ str(traffic['l4']['dstport']))
+
+ logging.debug("traffic['vlan']['enabled'] = " + \
+ str(traffic['vlan']['enabled']))
+
+ logging.debug("traffic['vlan']['id'] = " + \
+ str(traffic['vlan']['id']))
+
+ logging.debug("traffic['vlan']['priority'] = " + \
+ str(traffic['vlan']['priority']))
+
+ logging.debug("traffic['vlan']['cfi'] = " + \
+ str(traffic['vlan']['cfi']))
+
+ logging.debug(traffic['l2']['framesize'])
+
+ out_file = open("opnfv-vsperf-cfg.lua", "wt")
+
+ out_file.write("VSPERF {\n")
+
+ out_file.write("testType = \"throughput\",\n")
+
+ out_file.write("runBidirec = " + \
+ traffic['bidir'].lower() + ",\n")
+
+ out_file.write("frameSize = " + \
+ str(traffic['l2']['framesize']) + ",\n")
+
+ out_file.write("srcMac = \"" + \
+ str(traffic['l2']['srcmac']) + "\",\n")
+
+ out_file.write("dstMac = \"" + \
+ str(traffic['l2']['dstmac']) + "\",\n")
+
+ out_file.write("srcIp = \"" + \
+ str(traffic['l3']['srcip']) + "\",\n")
+
+ out_file.write("dstIp = \"" + \
+ str(traffic['l3']['dstip']) + "\",\n")
+
+ out_file.write("vlanId = " + \
+ str(traffic['vlan']['id']) + ",\n")
+
+ out_file.write("searchRunTime = " + \
+ str(duration) + ",\n")
+
+ out_file.write("validationRunTime = " + \
+ str(duration) + ",\n")
+
+ out_file.write("acceptableLossPct = " + \
+ str(acceptable_loss_pct) + ",\n")
+
+ out_file.write("ports = " +\
+ str(self._moongen_ports) + ",\n")
+
+ if one_shot:
+ out_file.write("oneShot = true,\n")
+
+ # Assume 10G line rates at the moment. Need to convert VSPERF
+ # frame_rate (percentage of line rate) to Mpps for MoonGen
+
+ out_file.write("startRate = " + str((traffic['frame_rate'] / 100) * 14.88) + "\n")
+ out_file.write("}" + "\n")
+ out_file.close()
+
+ copy_moongen_cfg = "scp opnfv-vsperf-cfg.lua " + \
+ self._moongen_user + "@" + \
+ self._moongen_host_ip_addr + ":" + \
+ self._moongen_base_dir + \
+ "/. && rm opnfv-vsperf-cfg.lua"
+
+ find_moongen = subprocess.Popen(copy_moongen_cfg,
+ shell=True,
+ stderr=subprocess.PIPE)
+
+ output, error = find_moongen.communicate()
+
+ if error:
+ logging.error(output)
+ logging.error(error)
+ raise RuntimeError('MOONGEN: Error copying configuration file')
+
+ def connect(self):
+ """Connect to MoonGen traffic generator
+
+ Verify that MoonGen is on the system indicated by
+ the configuration file
+ """
+ self._logger.info("MOONGEN: In MoonGen connect method...")
+
+ if self._moongen_host_ip_addr:
+ cmd_ping = "ping -c1 " + self._moongen_host_ip_addr
+ else:
+ raise RuntimeError('MOONGEN: MoonGen host not defined')
+
+ ping = subprocess.Popen(cmd_ping, shell=True, stderr=subprocess.PIPE)
+ output, error = ping.communicate()
+
+ if ping.returncode:
+ self._logger.error(error)
+ self._logger.error(output)
+ raise RuntimeError('MOONGEN: Cannot ping MoonGen host at ' + \
+ self._moongen_host_ip_addr)
+
+ connect_moongen = "ssh " + self._moongen_user + \
+ "@" + self._moongen_host_ip_addr
+
+ cmd_find_moongen = connect_moongen + " ls " + \
+ self._moongen_base_dir + "/examples/opnfv-vsperf.lua"
+
+ find_moongen = subprocess.Popen(cmd_find_moongen,
+ shell=True,
+ stderr=subprocess.PIPE)
+
+ output, error = find_moongen.communicate()
+
+ if find_moongen.returncode:
+ self._logger.error(error)
+ self._logger.error(output)
+ raise RuntimeError(
+ 'MOONGEN: Cannot locate MoonGen program at %s within %s' \
+ % (self._moongen_host_ip_addr, self._moongen_base_dir))
+
+ self._logger.info("MOONGEN: MoonGen host successfully found...")
+
+ def disconnect(self):
+ """Disconnect from the traffic generator.
+
+ As with :func:`connect`, this function is optional.
+
+ Where implemented, this function should raise an exception on
+ failure.
+
+ :returns: None
+ """
+ self._logger.info("MOONGEN: In moongen disconnect method")
+
+ def send_burst_traffic(self, traffic=None, numpkts=100, duration=20):
+ """Send a burst of traffic.
+
+ Send a ``numpkts`` packets of traffic, using ``traffic``
+ configuration, with a timeout of ``time``.
+
+ :param traffic: Detailed "traffic" spec, i.e. IP address, VLAN tags
+ :param numpkts: Number of packets to send
+ :param duration: Time to wait to receive packets
+
+ :returns: dictionary of strings with following data:
+ - List of Tx Frames,
+ - List of Rx Frames,
+ - List of Tx Bytes,
+ - List of List of Rx Bytes,
+ - Payload Errors and Sequence Errors.
+ """
+ self._logger.info("In moongen send_burst_traffic method")
+ return NotImplementedError('Moongen Burst traffic not implemented')
+
+ def send_cont_traffic(self, traffic=None, duration=20):
+ """Send a continuous flow of traffic
+
+ Send packets at ``frame rate``, using ``traffic`` configuration,
+ until timeout ``time`` occurs.
+
+ :param traffic: Detailed "traffic" spec, i.e. IP address, VLAN tags
+ :param duration: Time to wait to receive packets (secs)
+ :returns: dictionary of strings with following data:
+ - Tx Throughput (fps),
+ - Rx Throughput (fps),
+ - Tx Throughput (mbps),
+ - Rx Throughput (mbps),
+ - Tx Throughput (% linerate),
+ - Rx Throughput (% linerate),
+ - Min Latency (ns),
+ - Max Latency (ns),
+ - Avg Latency (ns)
+ """
+ self._logger.info("In moongen send_cont_traffic method")
+
+ self._params.clear()
+ self._params['traffic'] = self.traffic_defaults.copy()
+
+ if traffic:
+ self._params['traffic'] = merge_spec(self._params['traffic'],
+ traffic)
+
+ Moongen.create_moongen_cfg_file(self,
+ traffic,
+ duration=duration,
+ acceptable_loss_pct=100.0,
+ one_shot=1)
+
+ collected_results = Moongen.run_moongen_and_collect_results(self,
+ test_run=1)
+
+ total_throughput_rx_fps = (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_FPS]))
+
+ total_throughput_rx_mbps = (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_MBPS]))
+
+ total_throughput_rx_pct = (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_PERCENT]))
+
+ total_throughput_tx_fps = (
+ float(collected_results[ResultsConstants.TX_RATE_FPS]))
+
+ total_throughput_tx_mbps = (
+ float(collected_results[ResultsConstants.TX_RATE_MBPS]))
+
+ total_throughput_tx_pct = (
+ float(collected_results[ResultsConstants.TX_RATE_PERCENT]))
+
+ total_min_latency_ns = 0
+ total_max_latency_ns = 0
+ total_avg_latency_ns = 0
+
+ results = OrderedDict()
+ results[ResultsConstants.THROUGHPUT_RX_FPS] = (
+ '{:,.6f}'.format(total_throughput_rx_fps))
+
+ results[ResultsConstants.THROUGHPUT_RX_MBPS] = (
+ '{:,.3f}'.format(total_throughput_rx_mbps))
+
+ results[ResultsConstants.THROUGHPUT_RX_PERCENT] = (
+ '{:,.3f}'.format(total_throughput_rx_pct))
+
+ results[ResultsConstants.TX_RATE_FPS] = (
+ '{:,.6f}'.format(total_throughput_tx_fps))
+
+ results[ResultsConstants.TX_RATE_MBPS] = (
+ '{:,.3f}'.format(total_throughput_tx_mbps))
+
+ results[ResultsConstants.TX_RATE_PERCENT] = (
+ '{:,.3f}'.format(total_throughput_tx_pct))
+
+ results[ResultsConstants.MIN_LATENCY_NS] = (
+ '{:,.3f}'.format(total_min_latency_ns))
+
+ results[ResultsConstants.MAX_LATENCY_NS] = (
+ '{:,.3f}'.format(total_max_latency_ns))
+
+ results[ResultsConstants.AVG_LATENCY_NS] = (
+ '{:,.3f}'.format(total_avg_latency_ns))
+
+ return results
+
+ def start_cont_traffic(self, traffic=None, duration=20):
+ """ Non-blocking version of 'send_cont_traffic'.
+
+ Start transmission and immediately return. Do not wait for
+ results.
+ :param traffic: Detailed "traffic" spec, i.e. IP address, VLAN tags
+ :param duration: Time to wait to receive packets (secs)
+ """
+ self._logger.info("In moongen start_cont_traffic method")
+ return NotImplementedError('Moongen continuous traffic not implemented')
+
+ def stop_cont_traffic(self):
+ # Stop continuous transmission and return results.
+ self._logger.info("In moongen stop_cont_traffic method")
+
+ def run_moongen_and_collect_results(self, test_run=1):
+ """Execute MoonGen and transform results into VSPERF format
+ :param test_run: The number of tests to run
+ """
+ # Start MoonGen and create logfile of the run
+ connect_moongen = "ssh " + self._moongen_user + "@" + \
+ self._moongen_host_ip_addr
+
+ cmd_moongen = " 'cd " + self._moongen_base_dir + \
+ "; ./build/MoonGen examples/opnfv-vsperf.lua | tee moongen_log.txt'"
+
+ cmd_start_moongen = connect_moongen + cmd_moongen
+
+ start_moongen = subprocess.Popen(cmd_start_moongen,
+ shell=True, stderr=subprocess.PIPE)
+
+ output, error = start_moongen.communicate()
+
+ if start_moongen.returncode:
+ logging.debug(error)
+ logging.debug(output)
+ raise RuntimeError(
+ 'MOONGEN: Error starting MoonGen program at %s within %s' \
+ % (self._moongen_host_ip_addr, self._moongen_base_dir))
+
+ cmd_moongen = "mkdir -p /tmp/moongen/" + str(test_run)
+
+ moongen_create_log_dir = subprocess.Popen(cmd_moongen,
+ shell=True,
+ stderr=subprocess.PIPE)
+
+ output, error = moongen_create_log_dir.communicate()
+
+ if moongen_create_log_dir.returncode:
+ logging.debug(error)
+ logging.debug(output)
+ raise RuntimeError(
+ 'MOONGEN: Error obtaining MoonGen log from %s within %s' \
+ % (self._moongen_host_ip_addr, self._moongen_base_dir))
+
+ cmd_moongen = " scp " + self._moongen_user + "@" + \
+ self._moongen_host_ip_addr + ":" + \
+ self._moongen_base_dir + "/moongen_log.txt /tmp/moongen/" + \
+ str(test_run) + "/moongen-run.log"
+
+ copy_moongen_log = subprocess.Popen(cmd_moongen,
+ shell=True,
+ stderr=subprocess.PIPE)
+
+ output, error = copy_moongen_log.communicate()
+
+ if copy_moongen_log.returncode:
+ logging.debug(error)
+ logging.debug(output)
+ raise RuntimeError(
+ 'MOONGEN: Error obtaining MoonGen log from %s within %s' \
+ % (self._moongen_host_ip_addr, self._moongen_base_dir))
+
+ log_file = "/tmp/moongen/" + str(test_run) + "/moongen-run.log"
+
+ with open(log_file, 'r') as logfile_handle:
+ mytext = logfile_handle.read()
+
+ # REPORT results line
+ # match.group(1) = Tx frames
+ # match.group(2) = Rx frames
+ # match.group(3) = Frame loss (count)
+ # match.group(4) = Frame loss (percentage)
+ # match.group(5) = Tx Mpps
+ # match.group(6) = Rx Mpps
+ search_pattern = re.compile(
+ r'\[REPORT\]\s+total\:\s+'
+ r'Tx\s+frames\:\s+(\d+)\s+'
+ r'Rx\s+Frames\:\s+(\d+)\s+'
+ r'frame\s+loss\:\s+(\d+)\,'
+ r'\s+(\d+\.\d+|\d+)%\s+'
+ r'Tx\s+Mpps\:\s+(\d+.\d+|\d+)\s+'
+ r'Rx\s+Mpps\:\s+(\d+\.\d+|\d+)',
+ re.IGNORECASE)
+
+ results_match = search_pattern.search(mytext)
+
+ if not results_match:
+ logging.error('There was a problem parsing ' +\
+ 'MoonGen REPORT section of MoonGen log file')
+
+ moongen_results = OrderedDict()
+ moongen_results[ResultsConstants.THROUGHPUT_RX_FPS] = 0
+ moongen_results[ResultsConstants.THROUGHPUT_RX_MBPS] = 0
+ moongen_results[ResultsConstants.THROUGHPUT_RX_PERCENT] = 0
+ moongen_results[ResultsConstants.TX_RATE_FPS] = 0
+ moongen_results[ResultsConstants.TX_RATE_MBPS] = 0
+ moongen_results[ResultsConstants.TX_RATE_PERCENT] = 0
+ moongen_results[ResultsConstants.B2B_TX_COUNT] = 0
+ moongen_results[ResultsConstants.B2B_FRAMES] = 0
+ moongen_results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] = 0
+ moongen_results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] = 0
+
+ # find PARAMETERS line
+ # parameters_match.group(1) = Frame size
+
+ search_pattern = re.compile(
+ r'\[PARAMETERS\]\s+.*frameSize\:\s+(\d+)',
+ flags=re.IGNORECASE)
+ parameters_match = search_pattern.search(mytext)
+
+ if parameters_match:
+ frame_size = int(parameters_match.group(1))
+ else:
+ logging.error('There was a problem parsing MoonGen ' +\
+ 'PARAMETERS section of MoonGen log file')
+ frame_size = 0
+
+ if results_match and parameters_match:
+ # Assume for now 10G link speed
+ max_theoretical_mfps = (
+ (10000000000 / 8) / (frame_size + 20))
+
+ moongen_results[ResultsConstants.THROUGHPUT_RX_FPS] = (
+ float(results_match.group(6)) * 1000000)
+
+ moongen_results[ResultsConstants.THROUGHPUT_RX_MBPS] = (
+ (float(results_match.group(6)) * frame_size + 20) * 8)
+
+ moongen_results[ResultsConstants.THROUGHPUT_RX_PERCENT] = (
+ float(results_match.group(6)) * \
+ 1000000 / max_theoretical_mfps * 100)
+
+ moongen_results[ResultsConstants.TX_RATE_FPS] = (
+ float(results_match.group(5)) * 1000000)
+
+ moongen_results[ResultsConstants.TX_RATE_MBPS] = (
+ float(results_match.group(5)) * (frame_size + 20) * 8)
+
+ moongen_results[ResultsConstants.TX_RATE_PERCENT] = (
+ float(results_match.group(5)) *
+ 1000000 / max_theoretical_mfps * 100)
+
+ moongen_results[ResultsConstants.B2B_TX_COUNT] = (
+ float(results_match.group(1)))
+
+ moongen_results[ResultsConstants.B2B_FRAMES] = (
+ float(results_match.group(2)))
+
+ moongen_results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] = (
+ float(results_match.group(3)))
+
+ moongen_results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] = (
+ float(results_match.group(4)))
+
+ return moongen_results
+
+ def send_rfc2544_throughput(self, traffic=None, duration=20,
+ lossrate=0.0, trials=1):
+ #
+ # Send traffic per RFC2544 throughput test specifications.
+ #
+ # Send packets at a variable rate, using ``traffic``
+ # configuration, until minimum rate at which no packet loss is
+ # detected is found.
+ #
+ # :param traffic: Detailed "traffic" spec, see design docs for details
+ # :param trials: Number of trials to execute
+ # :param duration: Per iteration duration
+ # :param lossrate: Acceptable lossrate percentage
+ # :returns: dictionary of strings with following data:
+ # - Tx Throughput (fps),
+ # - Rx Throughput (fps),
+ # - Tx Throughput (mbps),
+ # - Rx Throughput (mbps),
+ # - Tx Throughput (% linerate),
+ # - Rx Throughput (% linerate),
+ # - Min Latency (ns),
+ # - Max Latency (ns),
+ # - Avg Latency (ns)
+ #
+ self._logger.info("In moongen send_rfc2544_throughput method")
+ self._params.clear()
+ self._params['traffic'] = self.traffic_defaults.copy()
+
+ if traffic:
+ self._params['traffic'] = merge_spec(self._params['traffic'],
+ traffic)
+ Moongen.create_moongen_cfg_file(self,
+ traffic,
+ duration=duration,
+ acceptable_loss_pct=lossrate)
+
+ total_throughput_rx_fps = 0
+ total_throughput_rx_mbps = 0
+ total_throughput_rx_pct = 0
+ total_throughput_tx_fps = 0
+ total_throughput_tx_mbps = 0
+ total_throughput_tx_pct = 0
+ total_min_latency_ns = 0
+ total_max_latency_ns = 0
+ total_avg_latency_ns = 0
+
+ for test_run in range(1, trials+1):
+ collected_results = (
+ Moongen.run_moongen_and_collect_results(self, test_run=test_run))
+
+ total_throughput_rx_fps += (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_FPS]))
+
+ total_throughput_rx_mbps += (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_MBPS]))
+
+ total_throughput_rx_pct += (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_PERCENT]))
+
+ total_throughput_tx_fps += (
+ float(collected_results[ResultsConstants.TX_RATE_FPS]))
+
+ total_throughput_tx_mbps += (
+ float(collected_results[ResultsConstants.TX_RATE_MBPS]))
+
+ total_throughput_tx_pct += (
+ float(collected_results[ResultsConstants.TX_RATE_PERCENT]))
+
+ # Latency not supported now, leaving as placeholder
+ total_min_latency_ns = 0
+ total_max_latency_ns = 0
+ total_avg_latency_ns = 0
+
+ results = OrderedDict()
+ results[ResultsConstants.THROUGHPUT_RX_FPS] = (
+ '{:,.6f}'.format(total_throughput_rx_fps / trials))
+
+ results[ResultsConstants.THROUGHPUT_RX_MBPS] = (
+ '{:,.3f}'.format(total_throughput_rx_mbps / trials))
+
+ results[ResultsConstants.THROUGHPUT_RX_PERCENT] = (
+ '{:,.3f}'.format(total_throughput_rx_pct / trials))
+
+ results[ResultsConstants.TX_RATE_FPS] = (
+ '{:,.6f}'.format(total_throughput_tx_fps / trials))
+
+ results[ResultsConstants.TX_RATE_MBPS] = (
+ '{:,.3f}'.format(total_throughput_tx_mbps / trials))
+
+ results[ResultsConstants.TX_RATE_PERCENT] = (
+ '{:,.3f}'.format(total_throughput_tx_pct / trials))
+
+ results[ResultsConstants.MIN_LATENCY_NS] = (
+ '{:,.3f}'.format(total_min_latency_ns / trials))
+
+ results[ResultsConstants.MAX_LATENCY_NS] = (
+ '{:,.3f}'.format(total_max_latency_ns / trials))
+
+ results[ResultsConstants.AVG_LATENCY_NS] = (
+ '{:,.3f}'.format(total_avg_latency_ns / trials))
+
+ return results
+
+ def start_rfc2544_throughput(self, traffic=None, trials=3, duration=20,
+ lossrate=0.0):
+ """Non-blocking version of 'send_rfc2544_throughput'.
+
+ Start transmission and immediately return. Do not wait for
+ results.
+ """
+ self._logger.info(
+ "MOONGEN: In moongen start_rfc2544_throughput method")
+
+ def wait_rfc2544_throughput(self):
+ """Wait for and return results of RFC2544 test.
+ """
+ self._logger.info('In moongen wait_rfc2544_throughput')
+
+ def send_rfc2544_back2back(self, traffic=None, duration=60,
+ lossrate=0.0, trials=1):
+ """Send traffic per RFC2544 back2back test specifications.
+
+ Send packets at a fixed rate, using ``traffic``
+ configuration, for duration seconds.
+
+ :param traffic: Detailed "traffic" spec, see design docs for details
+ :param trials: Number of trials to execute
+ :param duration: Per iteration duration
+ :param lossrate: Acceptable loss percentage
+
+ :returns: Named tuple of Rx Throughput (fps), Rx Throughput (mbps),
+ Tx Rate (% linerate), Rx Rate (% linerate), Tx Count (frames),
+ Back to Back Count (frames), Frame Loss (frames), Frame Loss (%)
+ :rtype: :class:`Back2BackResult`
+ """
+ self._params.clear()
+ self._params['traffic'] = self.traffic_defaults.copy()
+
+ if traffic:
+ self._params['traffic'] = merge_spec(self._params['traffic'],
+ traffic)
+
+ Moongen.create_moongen_cfg_file(self,
+ traffic,
+ duration=duration,
+ acceptable_loss_pct=lossrate)
+
+ results = OrderedDict()
+ results[ResultsConstants.B2B_RX_FPS] = 0
+ results[ResultsConstants.B2B_TX_FPS] = 0
+ results[ResultsConstants.B2B_RX_PERCENT] = 0
+ results[ResultsConstants.B2B_TX_PERCENT] = 0
+ results[ResultsConstants.B2B_TX_COUNT] = 0
+ results[ResultsConstants.B2B_FRAMES] = 0
+ results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] = 0
+ results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] = 0
+ results[ResultsConstants.SCAL_STREAM_COUNT] = 0
+ results[ResultsConstants.SCAL_STREAM_TYPE] = 0
+ results[ResultsConstants.SCAL_PRE_INSTALLED_FLOWS] = 0
+
+ for test_run in range(1, trials+1):
+ collected_results = (
+ Moongen.run_moongen_and_collect_results(self, test_run=test_run))
+
+ results[ResultsConstants.B2B_RX_FPS] += (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_FPS]))
+
+ results[ResultsConstants.B2B_RX_PERCENT] += (
+ float(collected_results[ResultsConstants.THROUGHPUT_RX_PERCENT]))
+
+ results[ResultsConstants.B2B_TX_FPS] += (
+ float(collected_results[ResultsConstants.TX_RATE_FPS]))
+
+ results[ResultsConstants.B2B_TX_PERCENT] += (
+ float(collected_results[ResultsConstants.TX_RATE_PERCENT]))
+
+ results[ResultsConstants.B2B_TX_COUNT] += (
+ int(collected_results[ResultsConstants.B2B_TX_COUNT]))
+
+ results[ResultsConstants.B2B_FRAMES] += (
+ int(collected_results[ResultsConstants.B2B_FRAMES]))
+
+ results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] += (
+ int(collected_results[ResultsConstants.B2B_FRAME_LOSS_FRAMES]))
+
+ results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] += (
+ int(collected_results[ResultsConstants.B2B_FRAME_LOSS_PERCENT]))
+
+ # Calculate average results
+ results[ResultsConstants.B2B_RX_FPS] = (
+ results[ResultsConstants.B2B_RX_FPS] / trials)
+
+ results[ResultsConstants.B2B_RX_PERCENT] = (
+ results[ResultsConstants.B2B_RX_PERCENT] / trials)
+
+ results[ResultsConstants.B2B_TX_FPS] = (
+ results[ResultsConstants.B2B_TX_FPS] / trials)
+
+ results[ResultsConstants.B2B_TX_PERCENT] = (
+ results[ResultsConstants.B2B_TX_PERCENT] / trials)
+
+ results[ResultsConstants.B2B_TX_COUNT] = (
+ results[ResultsConstants.B2B_TX_COUNT] / trials)
+
+ results[ResultsConstants.B2B_FRAMES] = (
+ results[ResultsConstants.B2B_FRAMES] / trials)
+
+ results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] = (
+ results[ResultsConstants.B2B_FRAME_LOSS_FRAMES] / trials)
+
+ results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] = (
+ results[ResultsConstants.B2B_FRAME_LOSS_PERCENT] / trials)
+
+ results[ResultsConstants.SCAL_STREAM_COUNT] = 0
+ results[ResultsConstants.SCAL_STREAM_TYPE] = 0
+ results[ResultsConstants.SCAL_PRE_INSTALLED_FLOWS] = 0
+
+ return results
+
+ def start_rfc2544_back2back(self, traffic=None, trials=1, duration=20,
+ lossrate=0.0):
+ #
+ # Non-blocking version of 'send_rfc2544_back2back'.
+ #
+ # Start transmission and immediately return. Do not wait for results.
+ #
+ self._logger.info("In moongen start_rfc2544_back2back method")
+ return NotImplementedError(
+ 'Moongen start back2back traffic not implemented')
+
+ def wait_rfc2544_back2back(self):
+ self._logger.info("In moongen wait_rfc2544_back2back method")
+ #
+ # Wait and set results of RFC2544 test.
+ #
+ return NotImplementedError(
+ 'Moongen wait back2back traffic not implemented')
+
+if __name__ == "__main__":
+ pass
diff --git a/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py b/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py
index 428240a1..91f7e27f 100644
--- a/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py
+++ b/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py
@@ -169,6 +169,11 @@ def main():
default="PAIR",
help="The traffic pattern between endpoints",
dest="traffic_pattern")
+ optional_named.add_argument("--traffic_custom",
+ required=False,
+ default=None,
+ help="The traffic pattern between endpoints",
+ dest="traffic_custom")
optional_named.add_argument("--search_mode",
required=False,
choices=["COMBO", "STEP", "BINARY"],
@@ -318,6 +323,12 @@ def main():
logger.debug("Creating project ...")
project = stc.get("System1", "children-Project")
+ # Configure any custom traffic parameters
+ if args.traffic_custom == "cont":
+ if args.verbose:
+ logger.debug("Configure Continuous Traffic")
+ stc.create("ContinuousTestConfig", under=project)
+
# Create ports
if args.verbose:
logger.debug("Creating ports ...")
diff --git a/tools/pkt_gen/testcenter/testcenter.py b/tools/pkt_gen/testcenter/testcenter.py
index 2adf6c90..f05ce337 100644
--- a/tools/pkt_gen/testcenter/testcenter.py
+++ b/tools/pkt_gen/testcenter/testcenter.py
@@ -55,9 +55,125 @@ class TestCenter(trafficgen.ITrafficGenerator):
def send_cont_traffic(self, traffic=None, duration=30):
"""
- Do nothing.
+ Send Custom - Continuous Test traffic
+ Reuse RFC2544 throughput test specifications along with
+ 'custom' configuration
"""
- return None
+ verbose = False
+ custom = "cont"
+ framesize = settings.getValue("TRAFFICGEN_STC_FRAME_SIZE")
+ if traffic and 'l2' in traffic:
+ if 'framesize' in traffic['l2']:
+ framesize = traffic['l2']['framesize']
+ args = [settings.getValue("TRAFFICGEN_STC_PYTHON2_PATH"),
+ os.path.join(
+ settings.getValue("TRAFFICGEN_STC_TESTCENTER_PATH"),
+ settings.getValue(
+ "TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME")),
+ "--lab_server_addr",
+ settings.getValue("TRAFFICGEN_STC_LAB_SERVER_ADDR"),
+ "--license_server_addr",
+ settings.getValue("TRAFFICGEN_STC_LICENSE_SERVER_ADDR"),
+ "--east_chassis_addr",
+ settings.getValue("TRAFFICGEN_STC_EAST_CHASSIS_ADDR"),
+ "--east_slot_num",
+ settings.getValue("TRAFFICGEN_STC_EAST_SLOT_NUM"),
+ "--east_port_num",
+ settings.getValue("TRAFFICGEN_STC_EAST_PORT_NUM"),
+ "--west_chassis_addr",
+ settings.getValue("TRAFFICGEN_STC_WEST_CHASSIS_ADDR"),
+ "--west_slot_num",
+ settings.getValue("TRAFFICGEN_STC_WEST_SLOT_NUM"),
+ "--west_port_num",
+ settings.getValue("TRAFFICGEN_STC_WEST_PORT_NUM"),
+ "--test_session_name",
+ settings.getValue("TRAFFICGEN_STC_TEST_SESSION_NAME"),
+ "--results_dir",
+ settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
+ "--csv_results_file_prefix",
+ settings.getValue("TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX"),
+ "--num_trials",
+ settings.getValue("TRAFFICGEN_STC_NUMBER_OF_TRIALS"),
+ "--trial_duration_sec",
+ settings.getValue("TRAFFICGEN_STC_TRIAL_DURATION_SEC"),
+ "--traffic_pattern",
+ settings.getValue("TRAFFICGEN_STC_TRAFFIC_PATTERN"),
+ "--traffic_custom",
+ str(custom),
+ "--search_mode",
+ settings.getValue("TRAFFICGEN_STC_SEARCH_MODE"),
+ "--learning_mode",
+ settings.getValue("TRAFFICGEN_STC_LEARNING_MODE"),
+ "--rate_lower_limit_pct",
+ settings.getValue("TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT"),
+ "--rate_upper_limit_pct",
+ settings.getValue("TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT"),
+ "--rate_initial_pct",
+ settings.getValue("TRAFFICGEN_STC_RATE_INITIAL_PCT"),
+ "--rate_step_pct",
+ settings.getValue("TRAFFICGEN_STC_RATE_STEP_PCT"),
+ "--resolution_pct",
+ settings.getValue("TRAFFICGEN_STC_RESOLUTION_PCT"),
+ "--frame_size_list",
+ str(framesize),
+ "--acceptable_frame_loss_pct",
+ settings.getValue("TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT"),
+ "--east_intf_addr",
+ settings.getValue("TRAFFICGEN_STC_EAST_INTF_ADDR"),
+ "--east_intf_gateway_addr",
+ settings.getValue("TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR"),
+ "--west_intf_addr",
+ settings.getValue("TRAFFICGEN_STC_WEST_INTF_ADDR"),
+ "--west_intf_gateway_addr",
+ settings.getValue("TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR")]
+
+ if settings.getValue("TRAFFICGEN_STC_VERBOSE") is "True":
+ args.append("--verbose")
+ verbose = True
+ self._logger.debug("Arguments used to call test: %s", args)
+ subprocess.check_call(args)
+
+ filec = os.path.join(settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
+ settings.getValue(
+ "TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX") +
+ ".csv")
+
+ if verbose:
+ self._logger.info("file: %s", filec)
+
+ result = {}
+
+ with open(filec, "r") as csvfile:
+ csvreader = csv.DictReader(csvfile)
+ for row in csvreader:
+ self._logger.info("Row: %s", row)
+ tx_fps = ((float(row["TxFrameCount"])) /
+ (float(row["Duration(sec)"])))
+ rx_fps = ((float(row["RxFrameCount"])) /
+ (float(row["Duration(sec)"])))
+ tx_mbps = ((float(row["TxFrameCount"]) *
+ float(row["ConfiguredFrameSize"])) /
+ (float(row["Duration(sec)"]) * 1000000.0))
+ rx_mbps = ((float(row["RxFrameCount"]) *
+ float(row["ConfiguredFrameSize"])) /
+ (float(row["Duration(sec)"]) * 1000000.0))
+ result[ResultsConstants.TX_RATE_FPS] = tx_fps
+ result[ResultsConstants.THROUGHPUT_RX_FPS] = rx_fps
+ result[ResultsConstants.TX_RATE_MBPS] = tx_mbps
+ result[ResultsConstants.THROUGHPUT_RX_MBPS] = rx_mbps
+ result[ResultsConstants.TX_RATE_PERCENT] = float(
+ row["OfferedLoad(%)"])
+ result[ResultsConstants.THROUGHPUT_RX_PERCENT] = float(
+ row["Throughput(%)"])
+ result[ResultsConstants.MIN_LATENCY_NS] = float(
+ row["MinimumLatency(us)"]) * 1000
+ result[ResultsConstants.MAX_LATENCY_NS] = float(
+ row["MaximumLatency(us)"]) * 1000
+ result[ResultsConstants.AVG_LATENCY_NS] = float(
+ row["AverageLatency(us)"]) * 1000
+ result[ResultsConstants.FRAME_LOSS_PERCENT] = float(
+ row["PercentLoss"])
+ return result
def send_rfc2544_throughput(self, traffic=None, trials=3, duration=20,
lossrate=0.0):
diff --git a/tools/pkt_gen/xena/profiles/baseconfig.x2544 b/tools/pkt_gen/xena/profiles/baseconfig.x2544
index 3ebe79dc..0612b329 100644
--- a/tools/pkt_gen/xena/profiles/baseconfig.x2544
+++ b/tools/pkt_gen/xena/profiles/baseconfig.x2544
@@ -207,7 +207,7 @@
"PassThreshold": 0.0
},
"ReportPropertyOptions": [
- "b"
+ "LatencyCounters"
],
"TestType": "Throughput",
"Enabled": false,
diff --git a/tools/pkt_gen/xena/xena.py b/tools/pkt_gen/xena/xena.py
index 194de343..7dd4b90b 100755
--- a/tools/pkt_gen/xena/xena.py
+++ b/tools/pkt_gen/xena/xena.py
@@ -30,6 +30,8 @@ import sys
from time import sleep
import xml.etree.ElementTree as ET
from collections import OrderedDict
+# scapy imports
+import scapy.layers.inet as inet
# VSPerf imports
from conf import settings
@@ -48,10 +50,6 @@ from tools.pkt_gen.xena.XenaDriver import (
XenaManager,
)
-# scapy imports
-import scapy.layers.inet as inet
-
-
class Xena(ITrafficGenerator):
"""
Xena Traffic generator wrapper class
@@ -94,11 +92,11 @@ class Xena(ITrafficGenerator):
if test_type == 'Throughput':
results = OrderedDict()
- results[ResultsConstants.THROUGHPUT_RX_FPS] = int(
- root[0][1][0][0].get('PortRxPps')) + int(
+ results[ResultsConstants.THROUGHPUT_RX_FPS] = float(
+ root[0][1][0][0].get('PortRxPps')) + float(
root[0][1][0][1].get('PortRxPps'))
- results[ResultsConstants.THROUGHPUT_RX_MBPS] = (int(
- root[0][1][0][0].get('PortRxBpsL1')) + int(
+ results[ResultsConstants.THROUGHPUT_RX_MBPS] = (float(
+ root[0][1][0][0].get('PortRxBpsL1')) + float(
root[0][1][0][1].get('PortRxBpsL1')))/ 1000000
results[ResultsConstants.THROUGHPUT_RX_PERCENT] = (
100 - int(root[0][1][0].get('TotalLossRatioPcnt'))) * float(
@@ -288,14 +286,23 @@ class Xena(ITrafficGenerator):
1, settings.getValue("TRAFFICGEN_XENA_PORT1_IP"),
settings.getValue("TRAFFICGEN_XENA_PORT1_CIDR"),
settings.getValue("TRAFFICGEN_XENA_PORT1_GATEWAY"))
- j_file.set_test_options(
- packet_sizes=self._params['traffic']['l2']['framesize'],
- iterations=trials, loss_rate=loss_rate,
- duration=self._duration, micro_tpld=True if self._params[
- 'traffic']['l2']['framesize'] == 64 else False)
+
if testtype == '2544_throughput':
+ j_file.set_test_options_tput(
+ packet_sizes=self._params['traffic']['l2']['framesize'],
+ iterations=trials, loss_rate=loss_rate,
+ duration=self._duration, micro_tpld=True if self._params[
+ 'traffic']['l2']['framesize'] == 64 else False)
j_file.enable_throughput_test()
+
elif testtype == '2544_b2b':
+ j_file.set_test_options_back2back(
+ packet_sizes=self._params['traffic']['l2']['framesize'],
+ iterations=trials, duration=self._duration,
+ startvalue=self._params['traffic']['frame_rate'],
+ endvalue=self._params['traffic']['frame_rate'],
+ micro_tpld=True if self._params[
+ 'traffic']['l2']['framesize'] == 64 else False)
j_file.enable_back2back_test()
j_file.set_header_layer2(
@@ -485,22 +492,18 @@ class Xena(ITrafficGenerator):
def send_burst_traffic(self, traffic=None, numpkts=100, duration=20):
"""Send a burst of traffic.
- Send a ``numpkts`` packets of traffic, using ``traffic``
- configuration, with a timeout of ``time``.
+ See ITrafficGenerator for description
+ """
+ self._duration = duration
- Attributes:
- :param traffic: Detailed "traffic" spec, i.e. IP address, VLAN tags
- :param numpkts: Number of packets to send
- :param duration: Time to wait to receive packets
+ self._params.clear()
+ self._params['traffic'] = self.traffic_defaults.copy()
+ if traffic:
+ self._params['traffic'] = merge_spec(self._params['traffic'],
+ traffic)
- :returns: dictionary of strings with following data:
- - List of Tx Frames,
- - List of Rx Frames,
- - List of Tx Bytes,
- - List of List of Rx Bytes,
- - Payload Errors and Sequence Errors.
- """
- raise NotImplementedError('Xena burst traffic not implemented')
+ self._start_traffic_api(numpkts)
+ return self._stop_api_traffic()
def send_cont_traffic(self, traffic=None, duration=20):
"""Send a continuous flow of traffic.
diff --git a/tools/pkt_gen/xena/xena_json.py b/tools/pkt_gen/xena/xena_json.py
index 23b56084..2a15a932 100644
--- a/tools/pkt_gen/xena/xena_json.py
+++ b/tools/pkt_gen/xena/xena_json.py
@@ -354,10 +354,10 @@ class XenaJSON(object):
self.json_data['PortHandler']['EntityList'][
port]["IpV6RoutingPrefix"] = int(netmask)
- def set_test_options(self, packet_sizes, duration, iterations, loss_rate,
- micro_tpld=False):
+ def set_test_options_tput(self, packet_sizes, duration, iterations,
+ loss_rate, micro_tpld=False):
"""
- Set the test options
+ Set the tput test options
:param packet_sizes: List of packet sizes to test, single int entry is
acceptable for one packet size testing
:param duration: time for each test in seconds as int
@@ -379,6 +379,35 @@ class XenaJSON(object):
self.json_data['TestOptions']['TestTypeOptionMap']['Throughput'][
'Iterations'] = iterations
+ def set_test_options_back2back(self, packet_sizes, duration,
+ iterations, startvalue, endvalue,
+ micro_tpld=False):
+ """
+ Set the back2back test options
+ :param packet_sizes: List of packet sizes to test, single int entry is
+ acceptable for one packet size testing
+ :param duration: time for each test in seconds as int
+ :param iterations: number of iterations of testing as int
+ :param micro_tpld: boolean if micro_tpld should be enabled or disabled
+ :param StartValue: start value
+ :param EndValue: end value
+ :return: None
+ """
+ if isinstance(packet_sizes, int):
+ packet_sizes = [packet_sizes]
+ self.json_data['TestOptions']['PacketSizes'][
+ 'CustomPacketSizes'] = packet_sizes
+ self.json_data['TestOptions']['TestTypeOptionMap']['Back2Back'][
+ 'Duration'] = duration
+ self.json_data['TestOptions']['FlowCreationOptions'][
+ 'UseMicroTpldOnDemand'] = 'true' if micro_tpld else 'false'
+ self.json_data['TestOptions']['TestTypeOptionMap']['Back2Back'][
+ 'Iterations'] = iterations
+ self.json_data['TestOptions']['TestTypeOptionMap']['Back2Back'][
+ 'RateSweepOptions']['StartValue'] = startvalue
+ self.json_data['TestOptions']['TestTypeOptionMap']['Back2Back'][
+ 'RateSweepOptions']['EndValue'] = endvalue
+
def set_topology_blocks(self):
"""
Set the test topology to a West to East config for half duplex flow with
@@ -586,8 +615,8 @@ if __name__ == "__main__":
JSON.set_header_layer3(src_ip='192.168.100.2', dst_ip='192.168.100.3',
protocol='udp')
JSON.set_header_layer4_udp(source_port=3000, destination_port=3001)
- JSON.set_test_options(packet_sizes=[64], duration=10, iterations=1,
- loss_rate=0.0, micro_tpld=True)
+ JSON.set_test_options_tput(packet_sizes=[64], duration=10, iterations=1,
+ loss_rate=0.0, micro_tpld=True)
JSON.add_header_segments(flows=4000, multistream_layer='L4')
JSON.set_topology_blocks()
write_json_file(JSON.json_data, './testthis.x2544')
diff --git a/vnfs/qemu/qemu.py b/vnfs/qemu/qemu.py
index 2de8df2a..9382edef 100644
--- a/vnfs/qemu/qemu.py
+++ b/vnfs/qemu/qemu.py
@@ -354,9 +354,22 @@ class IVnfQemu(IVnf):
'/DPDK/app/test-pmd')
self.execute_and_wait('make clean')
self.execute_and_wait('make')
- self.execute_and_wait('./testpmd -c 0x3 -n 4 --socket-mem 512 --'
- ' --burst=64 -i --txqflags=0xf00 ' +
- '--disable-hw-vlan', 60, "Done")
+ if int(S.getValue('GUEST_NIC_QUEUES')):
+ self.execute_and_wait(
+ './testpmd {} -n4 --socket-mem 512 --'.format(
+ S.getValue('GUEST_TESTPMD_CPU_MASK')) +
+ ' --burst=64 -i --txqflags=0xf00 ' +
+ '--nb-cores={} --rxq={} --txq={} '.format(
+ S.getValue('GUEST_TESTPMD_NB_CORES'),
+ S.getValue('GUEST_TESTPMD_TXQ'),
+ S.getValue('GUEST_TESTPMD_RXQ')) +
+ '--disable-hw-vlan', 60, "Done")
+ else:
+ self.execute_and_wait(
+ './testpmd {} -n 4 --socket-mem 512 --'.format(
+ S.getValue('GUEST_TESTPMD_CPU_MASK')) +
+ ' --burst=64 -i --txqflags=0xf00 ' +
+ '--disable-hw-vlan', 60, "Done")
self.execute('set fwd ' + self._testpmd_fwd_mode, 1)
self.execute_and_wait('start', 20,
'TX RS bit threshold=.+ - TXQ flags=0xf00')
diff --git a/vnfs/qemu/qemu_dpdk_vhost_user.py b/vnfs/qemu/qemu_dpdk_vhost_user.py
index f0f97d8a..49131423 100644
--- a/vnfs/qemu/qemu_dpdk_vhost_user.py
+++ b/vnfs/qemu/qemu_dpdk_vhost_user.py
@@ -38,6 +38,14 @@ class QemuDpdkVhostUser(IVnfQemu):
net1 = 'net' + str(i + 1)
net2 = 'net' + str(i + 2)
+ # multi-queue values
+ if int(S.getValue('GUEST_NIC_QUEUES')):
+ queue_str = ',queues={}'.format(S.getValue('GUEST_NIC_QUEUES'))
+ mq_vector_str = ',mq=on,vectors={}'.format(
+ int(S.getValue('GUEST_NIC_QUEUES')) * 2 + 2)
+ else:
+ queue_str, mq_vector_str = '', ''
+
self._cmd += ['-chardev',
'socket,id=char' + if1 +
',path=' + S.getValue('OVS_VAR_DIR') +
@@ -48,19 +56,20 @@ class QemuDpdkVhostUser(IVnfQemu):
'dpdkvhostuser' + if2,
'-netdev',
'type=vhost-user,id=' + net1 +
- ',chardev=char' + if1 + ',vhostforce',
+ ',chardev=char' + if1 + ',vhostforce' + queue_str,
'-device',
'virtio-net-pci,mac=' +
S.getValue('GUEST_NET1_MAC')[self._number] +
',netdev=' + net1 + ',csum=off,gso=off,' +
- 'guest_tso4=off,guest_tso6=off,guest_ecn=off',
+ 'guest_tso4=off,guest_tso6=off,guest_ecn=off' +
+ mq_vector_str,
'-netdev',
'type=vhost-user,id=' + net2 +
- ',chardev=char' + if2 + ',vhostforce',
+ ',chardev=char' + if2 + ',vhostforce' + queue_str,
'-device',
'virtio-net-pci,mac=' +
S.getValue('GUEST_NET2_MAC')[self._number] +
',netdev=' + net2 + ',csum=off,gso=off,' +
- 'guest_tso4=off,guest_tso6=off,guest_ecn=off',
+ 'guest_tso4=off,guest_tso6=off,guest_ecn=off' +
+ mq_vector_str,
]
-
diff --git a/vswitches/ovs_dpdk_vhost.py b/vswitches/ovs_dpdk_vhost.py
index 82b952de..2d424bc5 100644
--- a/vswitches/ovs_dpdk_vhost.py
+++ b/vswitches/ovs_dpdk_vhost.py
@@ -109,8 +109,11 @@ class OvsDpdkVhost(IVSwitchOvs):
dpdk_count = self._get_port_count('type=dpdk')
port_name = 'dpdk' + str(dpdk_count)
params = ['--', 'set', 'Interface', port_name, 'type=dpdk']
+ # multi-queue enable
+ if int(settings.getValue('VSWITCH_MULTI_QUEUES')):
+ params += ['options:n_rxq={}'.format(
+ settings.getValue('VSWITCH_MULTI_QUEUES'))]
of_port = bridge.add_port(port_name, params)
-
return (port_name, of_port)
def add_vport(self, switch_name):
@@ -130,7 +133,10 @@ class OvsDpdkVhost(IVSwitchOvs):
vhost_count = self._get_port_count('type=dpdkvhostuser')
port_name = 'dpdkvhostuser' + str(vhost_count)
params = ['--', 'set', 'Interface', port_name, 'type=dpdkvhostuser']
-
+ # multi queue enable
+ if int(settings.getValue('VSWITCH_MULTI_QUEUES')):
+ params += ['options:n_rxq={}'.format(
+ settings.getValue('VSWITCH_MULTI_QUEUES'))]
of_port = bridge.add_port(port_name, params)
return (port_name, of_port)