diff options
| -rwxr-xr-x | docs/userguide/integration.rst | 328 |
1 files changed, 327 insertions, 1 deletions
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst index eccd0c76..e45f2dc1 100755 --- a/docs/userguide/integration.rst +++ b/docs/userguide/integration.rst @@ -71,7 +71,7 @@ test step calls returns a value it can be later recalled, for example: ] } -This test profile uses the the vswitch add_vport method which returns a string +This test profile uses the vswitch add_vport method which returns a string value of the port added. This is later called by the del_port method using the name from step 1. @@ -103,6 +103,332 @@ This profile can then be used inside other testcases STEP_VSWITCH_PVP_FINIT } +HelloWorld and other basic Testcases +------------------------------------ + +The following examples are for demonstration purposes. +You can run them by copying and pasting into the +conf/integration/01_testcases.conf file. +A command-line instruction is shown at the end of each +example. + +HelloWorld +^^^^^^^^^^ + +The first example is a HelloWorld testcase. +It simply creates a bridge with 2 physical ports, then sets up a flow to drop +incoming packets from the port that was instantiated at the STEP #1. +There's no interaction with the traffic generator. +Then the flow, the 2 ports and the bridge are deleted. +'add_phy_port' method creates a 'dpdk' type interface that will manage the +physical port. The string value returned is the port name that will be referred +by 'del_port' later on. + +.. code-block:: python + + { + "Name": "HelloWorld", + "Description": "My first testcase", + "Deployment": "clean", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'actions': ['drop'], 'idle_timeout': '0'}], + ['vswitch', 'del_flow', 'int_br0'], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + + } + +To run HelloWorld test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --integration HelloWorld + +Specify a Flow by the IP address +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The next example shows how to explicitly set up a flow by specifying a +destination IP address. +All packets received from the port created at STEP #1 that have a destination +IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2. + +.. code-block:: python + + { + "Name": "p2p_rule_l3da", + "Description": "Phy2Phy with rule on L3 Dest Addr", + "Deployment": "clean", + "biDirectional": "False", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous'}], + ['vswitch', 'dump_flows', 'int_br0'], # STEP 5 + ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + +To run the test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --integration p2p_rule_l3da + +Multistream feature +^^^^^^^^^^^^^^^^^^^ + +The next testcase uses the multistream feature. +The traffic generator will send packets with different UDP ports. +That is accomplished by using "Stream Type" and "MultiStream" keywords. +4 different flows are set to forward all incoming packets. + +.. code-block:: python + + { + "Name": "multistream_l4", + "Description": "Multistream on UDP ports", + "Deployment": "clean", + "Stream Type": "L4", + "MultiStream": 4, + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + # Setup Flows + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + # Send mono-dir traffic + ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + 'bidir' : 'False'}], + # Clean up + ['vswitch', 'del_flow', 'int_br0'], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + +To run the test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --integration multistream_l4 + +PVP with a VM Replacement +^^^^^^^^^^^^^^^^^^^^^^^^^ + +This example launches a 1st VM in a PVP topology, then the VM is replaced +by another VM. +When VNF setup parameter in ./conf/04_vnf.conf is "QemuDpdkVhostUser" +'add_vport' method creates a 'dpdkvhostuser' type port to connect a VM. + +.. code-block:: python + + { + "Name": "ex_replace_vm", + "Description": "PVP with VM replacement", + "Deployment": "clean", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 + ['vswitch', 'add_vport', 'int_br0'], # STEP 4 + + # Setup Flows + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \ + 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \ + 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}], + + # Start VM 1 + ['vnf1', 'start'], + # Now we want to replace VM 1 with another VM + ['vnf1', 'stop'], + + ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm2 + ['vswitch', 'add_vport', 'int_br0'], # STEP 12 + ['vswitch', 'del_flow', 'int_br0'], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + + # Start VM 2 + ['vnf2', 'start'], + ['vnf2', 'stop'], + ['vswitch', 'dump_flows', 'int_br0'], + + # Clean up + ['vswitch', 'del_flow', 'int_br0'], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 + ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm2 + ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + +To run the test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --integration ex_replace_vm + +VM with a Linux bridge +^^^^^^^^^^^^^^^^^^^^^^ + +In this example a command-line parameter allows to set up a Linux bridge into +the guest VM. +That's one of the available ways to specify the guest application. +Packets matching the flow will be forwarded to the VM. + +.. code-block:: python + + { + "Name": "ex_pvp_rule_l3da", + "Description": "PVP with flow on L3 Dest Addr", + "Deployment": "clean", + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 + ['vswitch', 'add_vport', 'int_br0'], # STEP 4 + # Setup Flows + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \ + 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], + # Each pkt from the VM is forwarded to the 2nd dpdk port + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + # Start VMs + ['vnf1', 'start'], + ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + 'bidir' : 'False'}], + ['vnf1', 'stop'], + # Clean up + ['vswitch', 'dump_flows', 'int_br0'], # STEP 10 + ['vswitch', 'del_flow', 'int_br0'], # STEP 11 + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports + ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + +To run the test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --test-params + "guest_loopback=linux_bridge" --integration ex_pvp_rule_l3da + +Forward packets based on UDP port +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +This examples launches 2 VMs connected in parallel. +Incoming packets will be forwarded to one specific VM depending on the +destination UDP port. + +.. code-block:: python + + { + "Name": "ex_2pvp_rule_l4dp", + "Description": "2 PVP with flows on L4 Dest Port", + "Deployment": "clean", + "Stream Type": "L4", # loop UDP ports + "MultiStream": 2, + "TestSteps": [ + ['vswitch', 'add_switch', 'int_br0'], # STEP 0 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1 + ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2 + ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1 + ['vswitch', 'add_vport', 'int_br0'], # STEP 4 + ['vswitch', 'add_vport', 'int_br0'], # STEP 5 vm2 + ['vswitch', 'add_vport', 'int_br0'], # STEP 6 + # Setup Flows to reply ICMPv6 and similar packets, so to + # avoid flooding internal port with their re-transmissions + ['vswitch', 'add_flow', 'int_br0', \ + {'priority': '1', 'dl_src': '00:00:00:00:00:01', \ + 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', \ + {'priority': '1', 'dl_src': '00:00:00:00:00:02', \ + 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', \ + {'priority': '1', 'dl_src': '00:00:00:00:00:03', \ + 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', \ + {'priority': '1', 'dl_src': '00:00:00:00:00:04', \ + 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}], + # Forward UDP packets depending on dest port + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \ + 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \ + 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \ + 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}], + # Send VM output to phy port #2 + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \ + 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}], + # Start VMs + ['vnf1', 'start'], # STEP 16 + ['vnf2', 'start'], # STEP 17 + ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \ + 'bidir' : 'False'}], + ['vnf1', 'stop'], + ['vnf2', 'stop'], + ['vswitch', 'dump_flows', 'int_br0'], + # Clean up + ['vswitch', 'del_flow', 'int_br0'], + ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports + ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'], + ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'], # vm2 ports + ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'], + ['vswitch', 'del_switch', 'int_br0'], + ] + }, + +To run the test: + + .. code-block:: console + + ./vsperf --conf-file user_settings.py --integration ex_2pvp_rule_l4dp + Executing Tunnel encapsulation tests ------------------------------------ |