summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--docs/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.txt42
-rwxr-xr-xdocs/userguide/integration.rst328
-rw-r--r--src/dpdk/dpdk.py13
-rw-r--r--tools/networkcard.py2
-rw-r--r--tools/systeminfo.py41
-rw-r--r--vnfs/qemu/qemu.py8
-rw-r--r--vnfs/qemu/qemu_pci_passthrough.py3
7 files changed, 394 insertions, 43 deletions
diff --git a/docs/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.txt b/docs/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.txt
index 7375b618..7fb0562b 100644
--- a/docs/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.txt
+++ b/docs/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.txt
@@ -54,7 +54,7 @@ Status of This Memo
Tahhan, et al. Expires January 9, 2017 [Page 1]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -110,7 +110,7 @@ Table of Contents
Tahhan, et al. Expires January 9, 2017 [Page 2]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -166,7 +166,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 3]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -222,7 +222,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 4]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -278,7 +278,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 5]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -334,7 +334,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 6]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -390,7 +390,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 7]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -446,7 +446,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 8]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -502,7 +502,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 9]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -558,7 +558,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 10]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -614,7 +614,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 11]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -670,7 +670,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 12]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -726,7 +726,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 13]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -782,7 +782,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 14]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -838,7 +838,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 15]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -894,7 +894,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 16]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -950,7 +950,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 17]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -1006,7 +1006,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 18]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -1062,7 +1062,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 19]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -1118,7 +1118,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 20]
-
+
Internet-Draft Benchmarking vSwitches July 2016
@@ -1174,7 +1174,7 @@ Internet-Draft Benchmarking vSwitches July 2016
Tahhan, et al. Expires January 9, 2017 [Page 21]
-
+
Internet-Draft Benchmarking vSwitches July 2016
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index eccd0c76..e45f2dc1 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -71,7 +71,7 @@ test step calls returns a value it can be later recalled, for example:
]
}
-This test profile uses the the vswitch add_vport method which returns a string
+This test profile uses the vswitch add_vport method which returns a string
value of the port added. This is later called by the del_port method using the
name from step 1.
@@ -103,6 +103,332 @@ This profile can then be used inside other testcases
STEP_VSWITCH_PVP_FINIT
}
+HelloWorld and other basic Testcases
+------------------------------------
+
+The following examples are for demonstration purposes.
+You can run them by copying and pasting into the
+conf/integration/01_testcases.conf file.
+A command-line instruction is shown at the end of each
+example.
+
+HelloWorld
+^^^^^^^^^^
+
+The first example is a HelloWorld testcase.
+It simply creates a bridge with 2 physical ports, then sets up a flow to drop
+incoming packets from the port that was instantiated at the STEP #1.
+There's no interaction with the traffic generator.
+Then the flow, the 2 ports and the bridge are deleted.
+'add_phy_port' method creates a 'dpdk' type interface that will manage the
+physical port. The string value returned is the port name that will be referred
+by 'del_port' later on.
+
+.. code-block:: python
+
+ {
+ "Name": "HelloWorld",
+ "Description": "My first testcase",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['drop'], 'idle_timeout': '0'}],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+
+ }
+
+To run HelloWorld test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration HelloWorld
+
+Specify a Flow by the IP address
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The next example shows how to explicitly set up a flow by specifying a
+destination IP address.
+All packets received from the port created at STEP #1 that have a destination
+IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2.
+
+.. code-block:: python
+
+ {
+ "Name": "p2p_rule_l3da",
+ "Description": "Phy2Phy with rule on L3 Dest Addr",
+ "Deployment": "clean",
+ "biDirectional": "False",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous'}],
+ ['vswitch', 'dump_flows', 'int_br0'], # STEP 5
+ ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration p2p_rule_l3da
+
+Multistream feature
+^^^^^^^^^^^^^^^^^^^
+
+The next testcase uses the multistream feature.
+The traffic generator will send packets with different UDP ports.
+That is accomplished by using "Stream Type" and "MultiStream" keywords.
+4 different flows are set to forward all incoming packets.
+
+.. code-block:: python
+
+ {
+ "Name": "multistream_l4",
+ "Description": "Multistream on UDP ports",
+ "Deployment": "clean",
+ "Stream Type": "L4",
+ "MultiStream": 4,
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Send mono-dir traffic
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration multistream_l4
+
+PVP with a VM Replacement
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This example launches a 1st VM in a PVP topology, then the VM is replaced
+by another VM.
+When VNF setup parameter in ./conf/04_vnf.conf is "QemuDpdkVhostUser"
+'add_vport' method creates a 'dpdkvhostuser' type port to connect a VM.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_replace_vm",
+ "Description": "PVP with VM replacement",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \
+ 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \
+ 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
+
+ # Start VM 1
+ ['vnf1', 'start'],
+ # Now we want to replace VM 1 with another VM
+ ['vnf1', 'stop'],
+
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 12
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+
+ # Start VM 2
+ ['vnf2', 'start'],
+ ['vnf2', 'stop'],
+ ['vswitch', 'dump_flows', 'int_br0'],
+
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm2
+ ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration ex_replace_vm
+
+VM with a Linux bridge
+^^^^^^^^^^^^^^^^^^^^^^
+
+In this example a command-line parameter allows to set up a Linux bridge into
+the guest VM.
+That's one of the available ways to specify the guest application.
+Packets matching the flow will be forwarded to the VM.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_pvp_rule_l3da",
+ "Description": "PVP with flow on L3 Dest Addr",
+ "Deployment": "clean",
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+ # Setup Flows
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ # Each pkt from the VM is forwarded to the 2nd dpdk port
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Start VMs
+ ['vnf1', 'start'],
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ ['vnf1', 'stop'],
+ # Clean up
+ ['vswitch', 'dump_flows', 'int_br0'], # STEP 10
+ ['vswitch', 'del_flow', 'int_br0'], # STEP 11
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --test-params
+ "guest_loopback=linux_bridge" --integration ex_pvp_rule_l3da
+
+Forward packets based on UDP port
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This examples launches 2 VMs connected in parallel.
+Incoming packets will be forwarded to one specific VM depending on the
+destination UDP port.
+
+.. code-block:: python
+
+ {
+ "Name": "ex_2pvp_rule_l4dp",
+ "Description": "2 PVP with flows on L4 Dest Port",
+ "Deployment": "clean",
+ "Stream Type": "L4", # loop UDP ports
+ "MultiStream": 2,
+ "TestSteps": [
+ ['vswitch', 'add_switch', 'int_br0'], # STEP 0
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
+ ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 4
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 5 vm2
+ ['vswitch', 'add_vport', 'int_br0'], # STEP 6
+ # Setup Flows to reply ICMPv6 and similar packets, so to
+ # avoid flooding internal port with their re-transmissions
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:01', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:02', \
+ 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:03', \
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', \
+ {'priority': '1', 'dl_src': '00:00:00:00:00:04', \
+ 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
+ # Forward UDP packets depending on dest port
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
+ 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ # Send VM output to phy port #2
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ # Start VMs
+ ['vnf1', 'start'], # STEP 16
+ ['vnf2', 'start'], # STEP 17
+ ['trafficgen', 'send_traffic', {'traffic_type' : 'continuous', \
+ 'bidir' : 'False'}],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ # Clean up
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
+ ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'], # vm2 ports
+ ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'],
+ ['vswitch', 'del_switch', 'int_br0'],
+ ]
+ },
+
+To run the test:
+
+ .. code-block:: console
+
+ ./vsperf --conf-file user_settings.py --integration ex_2pvp_rule_l4dp
+
Executing Tunnel encapsulation tests
------------------------------------
diff --git a/src/dpdk/dpdk.py b/src/dpdk/dpdk.py
index 30f228f7..477c1de4 100644
--- a/src/dpdk/dpdk.py
+++ b/src/dpdk/dpdk.py
@@ -14,7 +14,7 @@
"""Automation of system configuration for DPDK use.
-Parts of this based on ``tools/dpdk_nic_bind.py`` script from Intel(R)
+Parts of this based on ``tools/dpdk*bind.py`` script from Intel(R)
DPDK.
"""
@@ -23,14 +23,15 @@ from sys import platform as _platform
import os
import subprocess
import logging
+import glob
from tools import tasks
from conf import settings
from tools.module_manager import ModuleManager
_LOGGER = logging.getLogger(__name__)
-RTE_PCI_TOOL = os.path.join(
- settings.getValue('RTE_SDK_USER'), 'tools', 'dpdk_nic_bind.py')
+RTE_PCI_TOOL = glob.glob(os.path.join(
+ settings.getValue('RTE_SDK_USER'), 'tools', 'dpdk*bind.py'))[0]
_DPDK_MODULE_MANAGER = ModuleManager()
@@ -168,7 +169,7 @@ def _vhost_user_cleanup():
def _bind_nics():
- """Bind NICs using the Intel DPDK ``dpdk_nic_bind.py`` tool.
+ """Bind NICs using the Intel DPDK ``dpdk*bind.py`` tool.
"""
try:
_driver = 'igb_uio'
@@ -189,7 +190,7 @@ def _bind_nics():
_LOGGER.error('Unable to bind NICs %s', str(_NICS_PCI))
def _unbind_nics():
- """Unbind NICs using the Intel DPDK ``dpdk_nic_bind.py`` tool.
+ """Unbind NICs using the Intel DPDK ``dpdk*bind.py`` tool.
"""
try:
tasks.run_task(['sudo', RTE_PCI_TOOL, '--unbind'] +
@@ -199,7 +200,7 @@ def _unbind_nics():
except subprocess.CalledProcessError:
_LOGGER.error('Unable to unbind NICs %s', str(_NICS_PCI))
# Rebind NICs to their original drivers
- # using the Intel DPDK ``dpdk_nic_bind.py`` tool.
+ # using the Intel DPDK ``dpdk*bind.py`` tool.
for nic in _NICS:
try:
if nic['driver']:
diff --git a/tools/networkcard.py b/tools/networkcard.py
index c31be691..8d704fd5 100644
--- a/tools/networkcard.py
+++ b/tools/networkcard.py
@@ -249,7 +249,7 @@ def reinit_vfs(pf_pci_handle):
:param pf_pci_handle: PCI slot identifier of PF with domain part.
"""
- rte_pci_tool = os.path.join(settings.getValue('RTE_SDK'), 'tools', 'dpdk_nic_bind.py')
+ rte_pci_tool = glob.glob(os.path.join(settings.getValue('RTE_SDK'), 'tools', 'dpdk*bind.py'))[0]
for vf_nic in get_sriov_vfs_list(pf_pci_handle):
nic_driver = get_driver(vf_nic)
diff --git a/tools/systeminfo.py b/tools/systeminfo.py
index 9d8eb5cb..50dc17e0 100644
--- a/tools/systeminfo.py
+++ b/tools/systeminfo.py
@@ -223,22 +223,45 @@ def get_version(app_name):
app_git_tag = get_git_tag(S.getValue('OVS_DIR'))
elif app_name.lower() in ['dpdk', 'testpmd']:
tmp_ver = ['', '', '']
- found = False
+ dpdk_16 = False
with open(app_version_file['dpdk']) as file_:
for line in file_:
if not line.strip():
continue
+ # DPDK version < 16
if line.startswith('#define RTE_VER_MAJOR'):
- found = True
tmp_ver[0] = line.rstrip('\n').split(' ')[2]
- if line.startswith('#define RTE_VER_MINOR'):
- found = True
- tmp_ver[1] = line.rstrip('\n').split(' ')[2]
- if line.startswith('#define RTE_VER_PATCH_LEVEL'):
- found = True
+ # DPDK version < 16
+ elif line.startswith('#define RTE_VER_PATCH_LEVEL'):
tmp_ver[2] = line.rstrip('\n').split(' ')[2]
-
- if found:
+ # DPDK version < 16
+ elif line.startswith('#define RTE_VER_PATCH_RELEASE'):
+ release = line.rstrip('\n').split(' ')[2]
+ if not '16' in release:
+ tmp_ver[2] += line.rstrip('\n').split(' ')[2]
+ # DPDK all versions
+ elif line.startswith('#define RTE_VER_MINOR'):
+ if dpdk_16:
+ tmp_ver[2] = line.rstrip('\n').split(' ')[2]
+ else:
+ tmp_ver[1] = line.rstrip('\n').split(' ')[2]
+ # DPDK all versions
+ elif line.startswith('#define RTE_VER_SUFFIX'):
+ tmp_ver[2] += line.rstrip('\n').split('"')[1]
+ # DPDK version >= 16
+ elif line.startswith('#define RTE_VER_YEAR'):
+ dpdk_16 = True
+ tmp_ver[0] = line.rstrip('\n').split(' ')[2]
+ # DPDK version >= 16
+ elif line.startswith('#define RTE_VER_MONTH'):
+ tmp_ver[1] = '{:0>2}'.format(line.rstrip('\n').split(' ')[2])
+ # DPDK version >= 16
+ elif line.startswith('#define RTE_VER_RELEASE'):
+ release = line.rstrip('\n').split(' ')[2]
+ if not '16' in release:
+ tmp_ver[2] += line.rstrip('\n').split(' ')[2]
+
+ if len(tmp_ver[0]):
app_version = '.'.join(tmp_ver)
app_git_tag = get_git_tag(S.getValue('RTE_SDK'))
elif app_name.lower().startswith('qemu'):
diff --git a/vnfs/qemu/qemu.py b/vnfs/qemu/qemu.py
index 9382edef..02ada4b5 100644
--- a/vnfs/qemu/qemu.py
+++ b/vnfs/qemu/qemu.py
@@ -338,16 +338,16 @@ class IVnfQemu(IVnf):
self.execute_and_wait('modprobe uio')
self.execute_and_wait('insmod %s/kmod/igb_uio.ko' %
S.getValue('RTE_TARGET'))
- self.execute_and_wait('./tools/dpdk_nic_bind.py --status')
+ self.execute_and_wait('./tools/dpdk*bind.py --status')
self.execute_and_wait(
- './tools/dpdk_nic_bind.py -u' ' ' +
+ './tools/dpdk*bind.py -u' ' ' +
S.getValue('GUEST_NET1_PCI_ADDRESS')[self._number] + ' ' +
S.getValue('GUEST_NET2_PCI_ADDRESS')[self._number])
self.execute_and_wait(
- './tools/dpdk_nic_bind.py -b igb_uio' ' ' +
+ './tools/dpdk*bind.py -b igb_uio' ' ' +
S.getValue('GUEST_NET1_PCI_ADDRESS')[self._number] + ' ' +
S.getValue('GUEST_NET2_PCI_ADDRESS')[self._number])
- self.execute_and_wait('./tools/dpdk_nic_bind.py --status')
+ self.execute_and_wait('./tools/dpdk*bind.py --status')
# build and run 'test-pmd'
self.execute_and_wait('cd ' + S.getValue('GUEST_OVS_DPDK_DIR') +
diff --git a/vnfs/qemu/qemu_pci_passthrough.py b/vnfs/qemu/qemu_pci_passthrough.py
index 1b55fdf2..14810f0a 100644
--- a/vnfs/qemu/qemu_pci_passthrough.py
+++ b/vnfs/qemu/qemu_pci_passthrough.py
@@ -19,6 +19,7 @@
import logging
import subprocess
import os
+import glob
from conf import settings as S
from vnfs.qemu.qemu import IVnfQemu
@@ -26,7 +27,7 @@ from tools import tasks
from tools.module_manager import ModuleManager
_MODULE_MANAGER = ModuleManager()
-_RTE_PCI_TOOL = os.path.join(S.getValue('RTE_SDK'), 'tools', 'dpdk_nic_bind.py')
+_RTE_PCI_TOOL = glob.glob(os.path.join(S.getValue('RTE_SDK'), 'tools', 'dpdk*bind.py'))[0]
class QemuPciPassthrough(IVnfQemu):
"""