Enable PVP and PVVP deployments for Vanilla OVS

Support for PVP and PVVP scenerios using Vanilla OVS was added.
VMs are configured to forward traffic between virtual interfaces
by standard linux capabilities. Traffic generator script was updated
to accept MAC and IP address configuration to allow VM forwarding
configuration.

VSPERF-66, VSPERF-70

Change-Id: Ia70ab6be547b39928a1eae319faba779d4e29284
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Brian Castelli <brian.castelli@spirent.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>

1 files changed, 115 insertions, 0 deletions

diff --git a/vnfs/qemu/qemu_virtio_net.py b/vnfs/qemu/qemu_virtio_net.py
new file mode 100644
index 00000000..7de5ea1c
--- /dev/null
+++ b/vnfs/qemu/qemu_virtio_net.py
@@ -0,0 +1,115 @@
+# Copyright 2016 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Automation of QEMU hypervisor for launching virtio-net enabled guests.
+"""
+
+import logging
+from vnfs.qemu.qemu import IVnfQemu
+from conf import settings as S
+from conf import get_test_param
+from tools import tasks
+
+class QemuVirtioNet(IVnfQemu):
+    """
+    Control an instance of QEMU with virtio-net guest communication.
+    """
+
+    def __init__(self):
+        """
+        Initialisation function.
+        """
+        super(QemuVirtioNet, self).__init__()
+        self._logger = logging.getLogger(__name__)
+
+        # insert vanilla ovs specific modules
+        tasks.run_task(['sudo', 'modprobe', 'vhost_net'], self._logger,
+                       'Loading vhost_net module...', True)
+
+        # calculate indexes of guest devices (e.g. charx, dpdkvhostuserx)
+        i = self._number * 2
+        if1 = str(i)
+        if2 = str(i + 1)
+        self._net1 = S.getValue('VANILLA_NIC1_NAME')[self._number]
+        self._net2 = S.getValue('VANILLA_NIC2_NAME')[self._number]
+
+        self._cmd += ['-netdev',
+                      'type=tap,id=' + self._net1 +
+                      ',script=no,downscript=no,' +
+                      'ifname=tap' + if1 + ',vhost=on',
+                      '-device',
+                      'virtio-net-pci,mac=' +
+                      S.getValue('GUEST_NET1_MAC')[self._number] +
+                      ',netdev=' + self._net1 + ',csum=off,gso=off,' +
+                      'guest_tso4=off,guest_tso6=off,guest_ecn=off',
+                      '-netdev',
+                      'type=tap,id=' + self._net2 +
+                      ',script=no,downscript=no,' +
+                      'ifname=tap' + if2 + ',vhost=on',
+                      '-device',
+                      'virtio-net-pci,mac=' +
+                      S.getValue('GUEST_NET2_MAC')[self._number] +
+                      ',netdev=' + self._net2 + ',csum=off,gso=off,' +
+                      'guest_tso4=off,guest_tso6=off,guest_ecn=off',
+                     ]
+
+    # helper functions
+
+    def _config_guest_loopback(self):
+        """
+        Configure VM to perform forwarding between NICs
+        """
+
+        # Disable services (F16)
+        self.execute_and_wait('systemctl stop iptables.service')
+        self.execute_and_wait('systemctl stop irqbalance.service')
+
+        nic1_name = get_test_param('vanilla_nic1_name', self._net1)
+        self.execute('ifconfig ' + nic1_name + ' ' +
+                     S.getValue('VANILLA_NIC1_IP_CIDR')[self._number])
+
+        nic2_name = get_test_param('vanilla_nic2_name', self._net2)
+        self.execute('ifconfig ' + nic2_name + ' ' +
+                     S.getValue('VANILLA_NIC2_IP_CIDR')[self._number])
+
+        # configure linux bridge
+        self.execute('brctl addbr br0')
+        self.execute('brctl addif br0 ' + self._net1 + ' ' + self._net2)
+        self.execute('ifconfig br0 ' +
+                     S.getValue('VANILLA_BRIDGE_IP')[self._number])
+
+        # Add the arp entries for the IXIA ports and the bridge you are using.
+        # Use command line values if provided.
+        trafficgen_mac = get_test_param('vanilla_tgen_port1_mac',
+                                        S.getValue('VANILLA_TGEN_PORT1_MAC'))
+        trafficgen_ip = get_test_param('vanilla_tgen_port1_ip',
+                                       S.getValue('VANILLA_TGEN_PORT1_IP'))
+
+        self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac)
+
+        trafficgen_mac = get_test_param('vanilla_tgen_port2_mac',
+                                        S.getValue('VANILLA_TGEN_PORT2_MAC'))
+        trafficgen_ip = get_test_param('vanilla_tgen_port2_ip',
+                                       S.getValue('VANILLA_TGEN_PORT2_IP'))
+
+        self.execute('arp -s ' + trafficgen_ip + ' ' + trafficgen_mac)
+
+        # Enable forwarding
+        self.execute('sysctl -w net.ipv4.ip_forward=1')
+
+        # Controls source route verification
+        # 0 means no source validation
+        self.execute('sysctl -w net.ipv4.conf.all.rp_filter=0')
+        self.execute('sysctl -w net.ipv4.conf.' + self._net1 + '.rp_filter=0')
+        self.execute('sysctl -w net.ipv4.conf.' + self._net2 + '.rp_filter=0')