Throughput and Latency Profile Test: Clarify

Make clear that 'max' refers to RFC2544 Throughput not line rate.

Change-Id: I968c1f99920b6ab0a3009622cb16c67daf5e3373
Signed-off-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>

1 files changed, 5 insertions, 5 deletions

diff --git a/docs/requirements/vswitchperf_ltd.rst b/docs/requirements/vswitchperf_ltd.rst
index 1ac56470..6b882290 100644
--- a/docs/requirements/vswitchperf_ltd.rst
+++ b/docs/requirements/vswitchperf_ltd.rst
@@ -1285,11 +1285,11 @@ Test ID: LTD.Throughput.RFC2544.Profile
     to the DUT's RFC 2544 Throughput as determined by
     LTD.Throughput.RFC2544.PacketLoss Ratio (0% Packet Loss case). A delta
     of 0% is equivalent to an offered traffic rate equal to the RFC 2544
-    Throughput; A delta of +50% indicates an offered rate half-way
-    between the Throughput and line-rate, whereas a delta of
-    -50% indicates an offered rate of half the maximum rate. Therefore the
-    range of the delta figure is natuarlly bounded at -100% (zero offered
-    traffic) and +100% (traffic offered at line rate).
+    Maximum Throughput; A delta of +50% indicates an offered rate half-way
+    between the Maximum RFC2544 Throughput and line-rate, whereas a delta of
+    -50% indicates an offered rate of half the RFC 2544 Maximum Throughput.
+    Therefore the range of the delta figure is natuarlly bounded at -100%
+    (zero offered traffic) and +100% (traffic offered at line rate).
 
     The following deltas to the maximum forwarding rate should be applied: