testpmd_pvp: Adds pkt_fwd to allow pvp topology testing

Requires DPDK 16.11 or greater to support vdev flags.

Initial support for TestPMD to support guests.

Allows vsperf to execute TestPMD as a switch for pvp
test scenarios.

Can be increased in functionality later to support
multiple guest configs.

JIRA: VSPERF-406

Change-Id: I67a5a355c990ca6cfcbb5845a2beaf1c1f21f5f0
Signed-off-by: Christian Trautman <ctrautma@redhat.com>

2 files changed, 53 insertions, 2 deletions

diff --git a/docs/release/NEWS.rst b/docs/release/NEWS.rst
index e1a9fa3b..02e03f79 100644
--- a/docs/release/NEWS.rst
+++ b/docs/release/NEWS.rst
@@ -7,6 +7,7 @@ OPNFV D Release
 * Remove support for vhost cuse
 * Add Vanilla OVS Multi-queue with non testpmd options
 * Add support for Multi-queue with OVS 2.5.0 or less
+* Add TestPMD as a switch option for pvp topology testing with vhostuser
 
 OPNFV Colorado Release
 ======================
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 46413f03..379618d2 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -613,7 +613,7 @@ or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
 
 .. code-block:: console
 
-    $ ./vsperf --conf-file user_settings.py \
+    $ ./vsperf phy2phy_cont --conf-file user_settings.py \
                --vswitch none \
                --fwdapp TestPMD
 
@@ -647,7 +647,57 @@ Supported Packet Forwarding applications are:
 
    .. code-block:: console
 
-      $ ./vsperf --conf-file <path_to_settings_py>
+      $ ./vsperf phy2phy_tput --conf-file <path_to_settings_py>
+
+Executing Packet Forwarding tests with one guest
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+TestPMD with DPDK 16.11 or greater can be used to forward packets as a switch to a single guest using TestPMD vdev
+option. To set this configuration the following parameters should be used.
+
+    .. code-block:: python
+
+        VSWITCH = 'none'
+        PKTFWD = 'TestPMD'
+
+or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
+
+    .. code-block:: console
+
+        $ ./vsperf pvp_tput --conf-file user_settings.py \
+                   --vswitch none \
+                   --fwdapp TestPMD
+
+Guest forwarding application only supports TestPMD in this configuration.
+
+    .. code-block:: python
+
+        GUEST_LOOPBACK = ['testpmd']
+
+For optimal performance one cpu per port +1 should be used for TestPMD. Also set additional params for packet forwarding
+application to use the correct number of nb-cores.
+
+    .. code-block:: python
+
+        VSWITCHD_DPDK_ARGS = ['-l', '46,44,42,40,38', '-n', '4', '--socket-mem 1024,0']
+        TESTPMD_ARGS = ['--nb-cores=4', '--txq=1', '--rxq=1']
+
+For guest TestPMD 3 VCpus should be assigned with the following TestPMD params.
+
+    .. code-block:: python
+
+        GUEST_TESTPMD_PARAMS = ['-l 0,1,2 -n 4 --socket-mem 1024 -- '
+                                '--burst=64 -i --txqflags=0xf00 '
+                                '--disable-hw-vlan --nb-cores=2 --txq=1 --rxq=1']
+
+Execution of TestPMD can be run with the following command line
+
+    .. code-block:: console
+
+        ./vsperf pvp_tput --vswitch=none --fwdapp=TestPMD --conf-file <path_to_settings_py>
+
+**NOTE:** To achieve the best 0% loss numbers with rfc2544 throughput testing, other tunings should be applied to host
+and guest such as tuned profiles and CPU tunings to prevent possible interrupts to worker threads.
 
 VSPERF modes of operation
 ^^^^^^^^^^^^^^^^^^^^^^^^^