test_spec: IETF Draft: Update to reflect dev since July and IETF-93 comments

Among the Updates needed are:
- Several New tests created since July, add to Matrix section.
- Re-named tests: fix in Matrix section.
- Link to Summaries on Wiki.
- Link to Test Setup Figures on Wiki.
- Add some general points on New Test Equipment Challenges/Metrics.
- Mention future test specs, and IFA003 as one source.

JIRA: VSPERF-120

Change-Id: I981b0b6301a208d20220f67784b4591aa3f51338
Signed-off-by: Al Morton <acmorton@att.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Billy O'Mahony<billy.o.mahony@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>

1 files changed, 964 insertions, 0 deletions

diff --git a/docs/to-be-reorganized/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml b/docs/to-be-reorganized/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml
new file mode 100755
index 00000000..b5f7f833
--- /dev/null
+++ b/docs/to-be-reorganized/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml
@@ -0,0 +1,964 @@
+<?xml version="1.0" encoding="US-ASCII"?>
+<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
+<?rfc toc="yes"?>
+<?rfc tocompact="yes"?>
+<?rfc tocdepth="3"?>
+<?rfc tocindent="yes"?>
+<?rfc symrefs="yes"?>
+<?rfc sortrefs="yes"?>
+<?rfc comments="yes"?>
+<?rfc inline="yes"?>
+<?rfc compact="yes"?>
+<?rfc subcompact="no"?>
+<rfc category="info" docName="draft-vsperf-bmwg-vswitch-opnfv-01"
+     ipr="trust200902">
+  <front>
+    <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
+    OPNFV</title>
+
+    <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
+      <organization>Intel</organization>
+
+      <address>
+        <postal>
+          <street/>
+
+          <city/>
+
+          <region/>
+
+          <code/>
+
+          <country/>
+        </postal>
+
+        <phone/>
+
+        <facsimile/>
+
+        <email>maryam.tahhan@intel.com</email>
+
+        <uri/>
+      </address>
+    </author>
+
+    <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
+      <organization>Intel</organization>
+
+      <address>
+        <postal>
+          <street/>
+
+          <city/>
+
+          <region/>
+
+          <code/>
+
+          <country/>
+        </postal>
+
+        <phone/>
+
+        <facsimile/>
+
+        <email>billy.o.mahony@intel.com</email>
+
+        <uri/>
+      </address>
+    </author>
+
+    <author fullname="Al Morton" initials="A." surname="Morton">
+      <organization>AT&amp;T Labs</organization>
+
+      <address>
+        <postal>
+          <street>200 Laurel Avenue South</street>
+
+          <city>Middletown,</city>
+
+          <region>NJ</region>
+
+          <code>07748</code>
+
+          <country>USA</country>
+        </postal>
+
+        <phone>+1 732 420 1571</phone>
+
+        <facsimile>+1 732 368 1192</facsimile>
+
+        <email>acmorton@att.com</email>
+
+        <uri>http://home.comcast.net/~acmacm/</uri>
+      </address>
+    </author>
+
+    <date day="14" month="October" year="2015"/>
+
+    <abstract>
+      <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
+      project on virtual switch performance "VSWITCHPERF". This project
+      intends to build on the current and completed work of the Benchmarking
+      Methodology Working Group in IETF, by referencing existing literature.
+      The Benchmarking Methodology Working Group has traditionally conducted
+      laboratory characterization of dedicated physical implementations of
+      internetworking functions. Therefore, this memo begins to describe the
+      additional considerations when virtual switches are implemented in
+      general-purpose hardware. The expanded tests and benchmarks are also
+      influenced by the OPNFV mission to support virtualization of the "telco"
+      infrastructure.</t>
+    </abstract>
+
+    <note title="Requirements Language">
+      <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
+      "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
+      document are to be interpreted as described in <xref
+      target="RFC2119">RFC 2119</xref>.</t>
+
+      <t/>
+    </note>
+  </front>
+
+  <middle>
+    <section title="Introduction">
+      <t>Benchmarking Methodology Working Group (BMWG) has traditionally
+      conducted laboratory characterization of dedicated physical
+      implementations of internetworking functions. The Black-box Benchmarks
+      of Throughput, Latency, Forwarding Rates and others have served our
+      industry for many years. Now, Network Function Virtualization (NFV) has
+      the goal to transform how internetwork functions are implemented, and
+      therefore has garnered much attention.</t>
+
+      <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
+      project on virtual switch performance characterization, "VSWITCHPERF".
+      This project intends to build on the current and completed work of the
+      Benchmarking Methodology Working Group in IETF, by referencing existing
+      literature. For example, currently the most often referenced RFC is
+      <xref target="RFC2544"/> (which depends on <xref target="RFC1242"/>) and
+      foundation of the benchmarking work in OPNFV is common and strong.</t>
+
+      <t>See
+      https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
+      for more background, and the OPNFV website for general information:
+      https://www.opnfv.org/</t>
+
+      <t>The authors note that OPNFV distinguishes itself from other open
+      source compute and networking projects through its emphasis on existing
+      "telco" services as opposed to cloud-computing. There are many ways in
+      which telco requirements have different emphasis on performance
+      dimensions when compared to cloud computing: support for and transfer of
+      isochronous media streams is one example.</t>
+
+      <t>Note also that the move to NFV Infrastructure has resulted in many
+      new benchmarking initiatives across the industry, and the authors are
+      currently doing their best to maintain alignment with many other
+      projects, and this Internet Draft is evidence of the efforts.</t>
+    </section>
+
+    <section title="Scope">
+      <t>The primary purpose and scope of the memo is to inform BMWG of
+      work-in-progress that builds on the body of extensive literature and
+      experience. Additionally, once the initial information conveyed here is
+      received, this memo may be expanded to include more detail and
+      commentary from both BMWG and OPNFV communities, under BMWG's chartered
+      work to characterize the NFV Infrastructure (a virtual switch is an
+      important aspect of that infrastructure).</t>
+    </section>
+
+    <section title="Benchmarking Considerations">
+      <t>This section highlights some specific considerations (from <xref
+      target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
+      switches. The OPNFV project is sharing its present view on these areas,
+      as they develop their specifications in the Level Test Design (LTD)
+      document.</t>
+
+      <section title="Comparison with Physical Network Functions">
+        <t>To compare the performance of virtual designs and implementations
+        with their physical counterparts, identical benchmarks are needed.
+        BMWG has developed specifications for many network functions this memo
+        re-uses existing benchmarks through references, and expands them
+        during development of new methods. A key configuration aspect is the
+        number of parallel cores required to achieve comparable performance
+        with a given physical device, or whether some limit of scale was
+        reached before the cores could achieve the comparable level.</t>
+
+        <t>It's unlikely that the virtual switch will be the only application
+        running on the SUT, so CPU utilization, Cache utilization, and Memory
+        footprint should also be recorded for the virtual implementations of
+        internetworking functions.</t>
+      </section>
+
+      <section title="Continued Emphasis on Black-Box Benchmarks">
+        <t>External observations remain essential as the basis for Benchmarks.
+        Internal observations with fixed specification and interpretation will
+        be provided in parallel to assist the development of operations
+        procedures when the technology is deployed.</t>
+      </section>
+
+      <section title="New Configuration Parameters">
+        <t>A key consideration when conducting any sort of benchmark is trying
+        to ensure the consistency and repeatability of test results. When
+        benchmarking the performance of a vSwitch there are many factors that
+        can affect the consistency of results, one key factor is matching the
+        various hardware and software details of the SUT. This section lists
+        some of the many new parameters which this project believes are
+        critical to report in order to achieve repeatability.</t>
+
+        <t>Hardware details including:</t>
+
+        <t><list style="symbols">
+            <t>Platform details</t>
+
+            <t>Processor details</t>
+
+            <t>Memory information (type and size)</t>
+
+            <t>Number of enabled cores</t>
+
+            <t>Number of cores used for the test</t>
+
+            <t>Number of physical NICs, as well as their details
+            (manufacturer, versions, type and the PCI slot they are plugged
+            into)</t>
+
+            <t>NIC interrupt configuration</t>
+
+            <t>BIOS version, release date and any configurations that were
+            modified</t>
+
+            <t>CPU microcode level</t>
+
+            <t>Memory DIMM configurations (quad rank performance may not be
+            the same as dual rank) in size, freq and slot locations</t>
+
+            <t>PCI configuration parameters (payload size, early ack
+            option...)</t>
+
+            <t>Power management at all levels (ACPI sleep states, processor
+            package, OS...)</t>
+          </list>Software details including:</t>
+
+        <t><list style="symbols">
+            <t>OS parameters and behavior (text vs graphical no one typing at
+            the console on one system)</t>
+
+            <t>OS version (for host and VNF)</t>
+
+            <t>Kernel version (for host and VNF)</t>
+
+            <t>GRUB boot parameters (for host and VNF)</t>
+
+            <t>Hypervisor details (Type and version)</t>
+
+            <t>Selected vSwitch, version number or commit id used</t>
+
+            <t>vSwitch launch command line if it has been parameterised</t>
+
+            <t>Memory allocation to the vSwitch</t>
+
+            <t>which NUMA node it is using, and how many memory channels</t>
+
+            <t>DPDK or any other SW dependency version number or commit id
+            used</t>
+
+            <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
+
+            <t>VM storage type: snapshot/independent persistent/independent
+            non-persistent</t>
+
+            <t>Number of VMs</t>
+
+            <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
+
+            <t>Number of virtual CPUs and their core affinity on the host</t>
+
+            <t>Number vNIC interrupt configuration</t>
+
+            <t>Thread affinitization for the applications (including the
+            vSwitch itself) on the host</t>
+
+            <t>Details of Resource isolation, such as CPUs designated for
+            Host/Kernel (isolcpu) and CPUs designated for specific processes
+            (taskset). - Test duration. - Number of flows.</t>
+          </list></t>
+
+        <t>Test Traffic Information:<list style="symbols">
+            <t>Traffic type - UDP, TCP, IMIX / Other</t>
+
+            <t>Packet Sizes</t>
+
+            <t>Deployment Scenario</t>
+          </list></t>
+
+        <t/>
+      </section>
+
+      <section title="Flow classification">
+        <t>Virtual switches group packets into flows by processing and
+        matching particular packet or frame header information, or by matching
+        packets based on the input ports. Thus a flow can be thought of a
+        sequence of packets that have the same set of header field values or
+        have arrived on the same port. Performance results can vary based on
+        the parameters the vSwitch uses to match for a flow. The recommended
+        flow classification parameters for any vSwitch performance tests are:
+        the input port, the source IP address, the destination IP address and
+        the Ethernet protocol type field. It is essential to increase the flow
+        timeout time on a vSwitch before conducting any performance tests that
+        do not measure the flow setup time. Normally the first packet of a
+        particular stream will install the flow in the virtual switch which
+        adds an additional latency, subsequent packets of the same flow are
+        not subject to this latency if the flow is already installed on the
+        vSwitch.</t>
+      </section>
+
+      <section title="Benchmarks using Baselines with Resource Isolation">
+        <t>This outline describes measurement of baseline with isolated
+        resources at a high level, which is the intended approach at this
+        time.</t>
+
+        <t><list style="numbers">
+            <t>Baselines: <list style="symbols">
+                <t>Optional: Benchmark platform forwarding capability without
+                a vswitch or VNF for at least 72 hours (serves as a means of
+                platform validation and a means to obtain the base performance
+                for the platform in terms of its maximum forwarding rate and
+                latency). <figure>
+                    <preamble>Benchmark platform forwarding
+                    capability</preamble>
+
+                    <artwork align="right"><![CDATA[                                                      __
+ +--------------------------------------------------+   |
+ |   +------------------------------------------+   |   |
+ |   |                                          |   |   |
+ |   |          Simple Forwarding App           |   |  Host
+ |   |                                          |   |   |
+ |   +------------------------------------------+   |   |
+ |   |                 NIC                      |   |   |
+ +---+------------------------------------------+---+ __|
+            ^                           :
+            |                           |
+            :                           v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+
+                    <postamble/>
+                  </figure></t>
+
+                <t>Benchmark VNF forwarding capability with direct
+                connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
+                hours (serves as a means of VNF validation and a means to
+                obtain the base performance for the VNF in terms of its
+                maximum forwarding rate and latency). The metrics gathered
+                from this test will serve as a key comparison point for
+                vSwitch bypass technologies performance and vSwitch
+                performance. <figure align="right">
+                    <preamble>Benchmark VNF forwarding capability</preamble>
+
+                    <artwork><![CDATA[                                                      __
+ +--------------------------------------------------+   |
+ |   +------------------------------------------+   |   |
+ |   |                                          |   |   |
+ |   |                 VNF                      |   |   |
+ |   |                                          |   |   |
+ |   +------------------------------------------+   |   |
+ |   |          Passthrough/SR-IOV              |   |  Host
+ |   +------------------------------------------+   |   |
+ |   |                 NIC                      |   |   |
+ +---+------------------------------------------+---+ __|
+            ^                           :
+            |                           |
+            :                           v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+
+                    <postamble/>
+                  </figure></t>
+
+                <t>Benchmarking with isolated resources alone, with other
+                resources (both HW&amp;SW) disabled Example, vSw and VM are
+                SUT</t>
+
+                <t>Benchmarking with isolated resources alone, leaving some
+                resources unused</t>
+
+                <t>Benchmark with isolated resources and all resources
+                occupied</t>
+              </list></t>
+
+            <t>Next Steps<list style="symbols">
+                <t>Limited sharing</t>
+
+                <t>Production scenarios</t>
+
+                <t>Stressful scenarios</t>
+              </list></t>
+          </list></t>
+      </section>
+    </section>
+
+    <section title="VSWITCHPERF Specification Summary">
+      <t>The overall specification in preparation is referred to as a Level
+      Test Design (LTD) document, which will contain a suite of performance
+      tests. The base performance tests in the LTD are based on the
+      pre-existing specifications developed by BMWG to test the performance of
+      physical switches. These specifications include:</t>
+
+      <t><list style="symbols">
+          <t><xref target="RFC2544"/> Benchmarking Methodology for Network
+          Interconnect Devices</t>
+
+          <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
+          Switching</t>
+
+          <t><xref target="RFC6201"/> Device Reset Characterization</t>
+
+          <t><xref target="RFC5481"/> Packet Delay Variation Applicability
+          Statement</t>
+        </list></t>
+
+      <t>Some of the above/newer RFCs are being applied in benchmarking for
+      the first time, and represent a development challenge for test equipment
+      developers. Fortunately, many members of the testing system community
+      have engaged on the VSPERF project, including an open source test
+      system.</t>
+
+      <t>In addition to this, the LTD also re-uses the terminology defined
+      by:</t>
+
+      <t><list style="symbols">
+          <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
+          Switching Devices</t>
+
+          <t><xref target="RFC5481"/> Packet Delay Variation Applicability
+          Statement</t>
+        </list></t>
+
+      <t/>
+
+      <t>Specifications to be included in future updates of the LTD
+      include:<list style="symbols">
+          <t><xref target="RFC3918"/> Methodology for IP Multicast
+          Benchmarking</t>
+
+          <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
+        </list></t>
+
+      <t>As one might expect, the most fundamental internetworking
+      characteristics of Throughput and Latency remain important when the
+      switch is virtualized, and these benchmarks figure prominently in the
+      specification.</t>
+
+      <t>When considering characteristics important to "telco" network
+      functions, we must begin to consider additional performance metrics. In
+      this case, the project specifications have referenced metrics from the
+      IETF IP Performance Metrics (IPPM) literature. This means that the <xref
+      target="RFC2544"/> test of Latency is replaced by measurement of a
+      metric derived from IPPM's <xref target="RFC2679"/>, where a set of
+      statistical summaries will be provided (mean, max, min, etc.). Further
+      metrics planned to be benchmarked include packet delay variation as
+      defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
+      availability, DUT capacity and packet loss in long term testing at
+      Throughput level, where some low-level of background loss may be present
+      and characterized.</t>
+
+      <t>Tests have been (or will be) designed to collect the metrics
+      below:</t>
+
+      <t><list style="symbols">
+          <t>Throughput Tests to measure the maximum forwarding rate (in
+          frames per second or fps) and bit rate (in Mbps) for a constant load
+          (as defined by RFC1242) without traffic loss.</t>
+
+          <t>Packet and Frame Delay Distribution Tests to measure average, min
+          and max packet and frame delay for constant loads.</t>
+
+          <t>Packet Delay Tests to understand latency distribution for
+          different packet sizes and over an extended test run to uncover
+          outliers.</t>
+
+          <t>Scalability Tests to understand how the virtual switch performs
+          as the number of flows, active ports, complexity of the forwarding
+          logic&rsquo;s configuration&hellip; it has to deal with
+          increases.</t>
+
+          <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
+          performance, i.e. how fast systems can send and receive data through
+          the switch.</t>
+
+          <t>Control Path and Datapath Coupling Tests, to understand how
+          closely coupled the datapath and the control path are as well as the
+          effect of this coupling on the performance of the DUT (example:
+          delay of the initial packet of a flow).</t>
+
+          <t>CPU and Memory Consumption Tests to understand the virtual
+          switch&rsquo;s footprint on the system, usually conducted as
+          auxiliary measurements with benchmarks above. They include: CPU
+          utilization, Cache utilization and Memory footprint.</t>
+        </list></t>
+
+      <t>Future/planned test specs include:<list style="symbols">
+          <t>Request/Response Performance Tests (TCP, UDP) which measure the
+          transaction rate through the switch.</t>
+
+          <t>Noisy Neighbour Tests, to understand the effects of resource
+          sharing on the performance of a virtual switch.</t>
+
+          <t>Tests derived from examination of ETSI NFV Draft GS IFA003
+          requirements <xref target="IFA003"/> on characterization of
+          acceleration technologies applied to vswitches.</t>
+        </list>The flexibility of deployment of a virtual switch within a
+      network means that the BMWG IETF existing literature needs to be used to
+      characterize the performance of a switch in various deployment
+      scenarios. The deployment scenarios under consideration include:</t>
+
+      <t><figure>
+          <preamble>Physical port to virtual switch to physical
+          port</preamble>
+
+          <artwork><![CDATA[                                                      __
+ +--------------------------------------------------+   |
+ |              +--------------------+              |   |
+ |              |                    |              |   |
+ |              |                    v              |   |  Host
+ |   +--------------+            +--------------+   |   |
+ |   |   phy port   |  vSwitch   |   phy port   |   |   |
+ +---+--------------+------------+--------------+---+ __|
+            ^                           :
+            |                           |
+            :                           v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+        </figure></t>
+
+      <t><figure>
+          <preamble>Physical port to virtual switch to VNF to virtual switch
+          to physical port</preamble>
+
+          <artwork><![CDATA[                                                      __
+ +---------------------------------------------------+   |
+ |                                                   |   |
+ |   +-------------------------------------------+   |   |
+ |   |                 Application               |   |   |
+ |   +-------------------------------------------+   |   |
+ |       ^                                  :        |   |
+ |       |                                  |        |   |  Guest
+ |       :                                  v        |   |
+ |   +---------------+           +---------------+   |   |
+ |   | logical port 0|           | logical port 1|   |   |
+ +---+---------------+-----------+---------------+---+ __|
+         ^                                  :
+         |                                  |
+         :                                  v         __
+ +---+---------------+----------+---------------+---+   |
+ |   | logical port 0|          | logical port 1|   |   |
+ |   +---------------+          +---------------+   |   |
+ |       ^                                  :       |   |
+ |       |                                  |       |   |  Host
+ |       :                                  v       |   |
+ |   +--------------+            +--------------+   |   |
+ |   |   phy port   |  vSwitch   |   phy port   |   |   |
+ +---+--------------+------------+--------------+---+ __|
+            ^                           :
+            |                           |
+            :                           v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+        </figure><figure>
+          <preamble>Physical port to virtual switch to VNF to virtual switch
+          to VNF to virtual switch to physical port</preamble>
+
+          <artwork><![CDATA[                                                   __
+ +----------------------+  +----------------------+  |
+ |   Guest 1            |  |   Guest 2            |  |
+ |   +---------------+  |  |   +---------------+  |  |
+ |   |  Application  |  |  |   |  Application  |  |  |
+ |   +---------------+  |  |   +---------------+  |  |
+ |       ^       |      |  |       ^       |      |  |
+ |       |       v      |  |       |       v      |  |  Guests
+ |   +---------------+  |  |   +---------------+  |  |
+ |   | logical ports |  |  |   | logical ports |  |  |
+ |   |   0       1   |  |  |   |   0       1   |  |  |
+ +---+---------------+--+  +---+---------------+--+__|
+         ^       :                 ^       :
+         |       |                 |       |
+         :       v                 :       v       _
+ +---+---------------+---------+---------------+--+ |
+ |   |   0       1   |         |   3       4   |  | |
+ |   | logical ports |         | logical ports |  | |
+ |   +---------------+         +---------------+  | |
+ |       ^       |                 ^       |      | |  Host
+ |       |       |-----------------|       v      | |
+ |   +--------------+          +--------------+   | |
+ |   |   phy ports  | vSwitch  |   phy ports  |   | |
+ +---+--------------+----------+--------------+---+_|
+         ^                                 :
+         |                                 |
+         :                                 v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+        </figure><figure>
+          <preamble>Physical port to virtual switch to VNF</preamble>
+
+          <artwork><![CDATA[                                                       __
+ +---------------------------------------------------+   |
+ |                                                   |   |
+ |   +-------------------------------------------+   |   |
+ |   |                 Application               |   |   |
+ |   +-------------------------------------------+   |   |
+ |       ^                                           |   |
+ |       |                                           |   |  Guest
+ |       :                                           |   |
+ |   +---------------+                               |   |
+ |   | logical port 0|                               |   |
+ +---+---------------+-------------------------------+ __|
+         ^
+         |
+         :                                            __
+ +---+---------------+------------------------------+   |
+ |   | logical port 0|                              |   |
+ |   +---------------+                              |   |
+ |       ^                                          |   |
+ |       |                                          |   |  Host
+ |       :                                          |   |
+ |   +--------------+                               |   |
+ |   |   phy port   |  vSwitch                      |   |
+ +---+--------------+------------ -------------- ---+ __|
+            ^
+            |
+            :
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+        </figure><figure>
+          <preamble>VNF to virtual switch to physical port</preamble>
+
+          <artwork><![CDATA[                                                       __
+ +---------------------------------------------------+   |
+ |                                                   |   |
+ |   +-------------------------------------------+   |   |
+ |   |                 Application               |   |   |
+ |   +-------------------------------------------+   |   |
+ |                                          :        |   |
+ |                                          |        |   |  Guest
+ |                                          v        |   |
+ |                               +---------------+   |   |
+ |                               | logical port  |   |   |
+ +-------------------------------+---------------+---+ __|
+                                            :
+                                            |
+                                            v         __
+ +------------------------------+---------------+---+   |
+ |                              | logical port  |   |   |
+ |                              +---------------+   |   |
+ |                                          :       |   |
+ |                                          |       |   |  Host
+ |                                          v       |   |
+ |                               +--------------+   |   |
+ |                     vSwitch   |   phy port   |   |   |
+ +-------------------------------+--------------+---+ __|
+                                        :
+                                        |
+                                        v
+ +--------------------------------------------------+
+ |                                                  |
+ |                traffic generator                 |
+ |                                                  |
+ +--------------------------------------------------+]]></artwork>
+        </figure><figure>
+          <preamble>VNF to virtual switch to VNF</preamble>
+
+          <artwork><![CDATA[                                                   __
+ +----------------------+  +----------------------+  |
+ |   Guest 1            |  |   Guest 2            |  |
+ |   +---------------+  |  |   +---------------+  |  |
+ |   |  Application  |  |  |   |  Application  |  |  |
+ |   +---------------+  |  |   +---------------+  |  |
+ |              |       |  |       ^              |  |
+ |              v       |  |       |              |  |  Guests
+ |   +---------------+  |  |   +---------------+  |  |
+ |   | logical ports |  |  |   | logical ports |  |  |
+ |   |           0   |  |  |   |   0           |  |  |
+ +---+---------------+--+  +---+---------------+--+__|
+                 :                 ^
+                 |                 |
+                 v                 :               _
+ +---+---------------+---------+---------------+--+ |
+ |   |           1   |         |   1           |  | |
+ |   | logical ports |         | logical ports |  | |
+ |   +---------------+         +---------------+  | |
+ |               |                 ^              | |  Host
+ |               L-----------------+              | |
+ |                                                | |
+ |                    vSwitch                     | |
+ +------------------------------------------------+_|]]></artwork>
+        </figure></t>
+
+      <t>A set of Deployment Scenario figures is available on the VSPERF Test
+      Methodology Wiki page <xref target="TestTopo"/>. </t>
+    </section>
+
+    <section title="3x3 Matrix Coverage">
+      <t>This section organizes the many existing test specifications into the
+      "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
+      Because the LTD specification ID names are quite long, this section is
+      organized into lists for each occupied cell of the matrix (not all are
+      occupied, also the matrix has grown to 3x4 to accommodate scale metrics
+      when displaying the coverage of many metrics/benchmarks).</t>
+
+      <t>The tests listed below assess the activation of paths in the data
+      plane, rather than the control plane.</t>
+
+      <t>A complete list of tests with short summaries is available on the
+      VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
+
+      <section title="Speed of Activation">
+        <t><list style="symbols">
+            <t>Activation.RFC2889.AddressLearningRate</t>
+
+            <t>PacketLatency.InitialPacketProcessingLatency</t>
+          </list></t>
+      </section>
+
+      <section title="Accuracy of Activation section">
+        <t><list style="symbols">
+            <t>CPDP.Coupling.Flow.Addition</t>
+          </list></t>
+      </section>
+
+      <section title="Reliability of Activation">
+        <t><list style="symbols">
+            <t>Throughput.RFC2544.SystemRecoveryTime</t>
+
+            <t>Throughput.RFC2544.ResetTime</t>
+          </list></t>
+      </section>
+
+      <section title="Scale of Activation">
+        <t><list style="symbols">
+            <t>Activation.RFC2889.AddressCachingCapacity</t>
+          </list></t>
+      </section>
+
+      <section title="Speed of Operation">
+        <t><list style="symbols">
+            <t>Throughput.RFC2544.PacketLossRate</t>
+
+            <t>CPU.RFC2544.0PacketLoss</t>
+
+            <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
+
+            <t>Throughput.RFC2544.BackToBackFrames</t>
+
+            <t>Throughput.RFC2889.MaxForwardingRate</t>
+
+            <t>Throughput.RFC2889.ForwardPressure</t>
+
+            <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
+          </list></t>
+      </section>
+
+      <section title="Accuracy of Operation">
+        <t><list style="symbols">
+            <t>Throughput.RFC2889.ErrorFramesFiltering</t>
+
+            <t>Throughput.RFC2544.Profile</t>
+          </list></t>
+      </section>
+
+      <section title="Reliability of Operation">
+        <t><list style="symbols">
+            <t>Throughput.RFC2889.Soak</t>
+
+            <t>Throughput.RFC2889.SoakFrameModification</t>
+
+            <t>PacketDelayVariation.RFC3393.Soak</t>
+          </list></t>
+      </section>
+
+      <section title="Scalability of Operation">
+        <t><list style="symbols">
+            <t>Scalability.RFC2544.0PacketLoss</t>
+
+            <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
+          </list></t>
+      </section>
+
+      <section title="Summary">
+        <t><figure>
+            <artwork><![CDATA[|------------------------------------------------------------------------|
+|               |             |            |               |             |
+|               |   SPEED     |  ACCURACY  |  RELIABILITY  |    SCALE    |
+|               |             |            |               |             |
+|------------------------------------------------------------------------|
+|               |             |            |               |             |
+|  Activation   |      X      |     X      |       X       |      X      |
+|               |             |            |               |             |
+|------------------------------------------------------------------------|
+|               |             |            |               |             |
+|  Operation    |      X      |      X     |       X       |      X      |
+|               |             |            |               |             |
+|------------------------------------------------------------------------|
+|               |             |            |               |             |
+| De-activation |             |            |               |             |
+|               |             |            |               |             |
+|------------------------------------------------------------------------|]]></artwork>
+          </figure></t>
+      </section>
+    </section>
+
+    <section title="Security Considerations">
+      <t>Benchmarking activities as described in this memo are limited to
+      technology characterization of a Device Under Test/System Under Test
+      (DUT/SUT) using controlled stimuli in a laboratory environment, with
+      dedicated address space and the constraints specified in the sections
+      above.</t>
+
+      <t>The benchmarking network topology will be an independent test setup
+      and MUST NOT be connected to devices that may forward the test traffic
+      into a production network, or misroute traffic to the test management
+      network.</t>
+
+      <t>Further, benchmarking is performed on a "black-box" basis, relying
+      solely on measurements observable external to the DUT/SUT.</t>
+
+      <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
+      benchmarking purposes. Any implications for network security arising
+      from the DUT/SUT SHOULD be identical in the lab and in production
+      networks.</t>
+    </section>
+
+    <section anchor="IANA" title="IANA Considerations">
+      <t>No IANA Action is requested at this time.</t>
+    </section>
+
+    <section title="Acknowledgements">
+      <t>The authors acknowledge</t>
+    </section>
+  </middle>
+
+  <back>
+    <references title="Normative References">
+      <?rfc ?>
+
+      <?rfc include="reference.RFC.2119"?>
+
+      <?rfc include="reference.RFC.2330"?>
+
+      <?rfc include='reference.RFC.2544'?>
+
+      <?rfc include="reference.RFC.2679"?>
+
+      <?rfc include='reference.RFC.2680'?>
+
+      <?rfc include='reference.RFC.3393'?>
+
+      <?rfc include='reference.RFC.3432'?>
+
+      <?rfc include='reference.RFC.2681'?>
+
+      <?rfc include='reference.RFC.5905'?>
+
+      <?rfc include='reference.RFC.4689'?>
+
+      <?rfc include='reference.RFC.4737'?>
+
+      <?rfc include='reference.RFC.5357'?>
+
+      <?rfc include='reference.RFC.2889'?>
+
+      <?rfc include='reference.RFC.3918'?>
+
+      <?rfc include='reference.RFC.6201'?>
+
+      <?rfc include='reference.RFC.2285'?>
+
+      <reference anchor="NFV.PER001">
+        <front>
+          <title>Network Function Virtualization: Performance and Portability
+          Best Practices</title>
+
+          <author fullname="ETSI NFV" initials="" surname="">
+            <organization/>
+          </author>
+
+          <date month="June" year="2014"/>
+        </front>
+
+        <seriesInfo name="Group Specification"
+                    value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
+
+        <format type="PDF"/>
+      </reference>
+    </references>
+
+    <references title="Informative References">
+      <?rfc include='reference.RFC.1242'?>
+
+      <?rfc include='reference.RFC.5481'?>
+
+      <?rfc include='reference.RFC.6049'?>
+
+      <?rfc include='reference.RFC.6248'?>
+
+      <?rfc include='reference.RFC.6390'?>
+
+      <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
+
+      <reference anchor="TestTopo">
+        <front>
+          <title>Test Topologies
+          https://wiki.opnfv.org/vsperf/test_methodology</title>
+
+          <author>
+            <organization/>
+          </author>
+
+          <date/>
+        </front>
+      </reference>
+
+      <reference anchor="LTDoverV">
+        <front>
+          <title>LTD Test Spec Overview
+          https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review </title>
+
+          <author>
+            <organization/>
+          </author>
+
+          <date/>
+        </front>
+      </reference>
+
+      <reference anchor="IFA003">
+        <front>
+          <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
+
+          <author>
+            <organization/>
+          </author>
+
+          <date/>
+        </front>
+      </reference>
+    </references>
+  </back>
+</rfc>