docs: Remove hyperlinks to docs in artifacts

It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.

JIRA: VSPERF-442

Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>

2 files changed, 17 insertions, 48 deletions

diff --git a/docs/results/index.rst b/docs/results/index.rst
deleted file mode 100644
index 04899b5a..00000000
--- a/docs/results/index.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-**************
-VSPERF Results
-**************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   scenario.rst
-   results.rst
diff --git a/docs/results/scenario.rst b/docs/results/scenario.rst
index cb42c8dc..49ff626a 100644
--- a/docs/results/scenario.rst
+++ b/docs/results/scenario.rst
@@ -9,34 +9,33 @@ Available Tests and aspects of scenarios:
 ===================== ===========================================================
    Framework Test                          Definition
 ===================== ===========================================================
-phy2phy_tput          PacketLossRatio_ for Phy2Phy_
-back2back             BackToBackFrames_ for Phy2Phy_
-phy2phy_tput_mod_vlan PacketLossRatioFrameModification_ for Phy2Phy_
-phy2phy_cont          Phy2Phy_ blast vswitch at x% TX rate and measure throughput
-pvp_cont              PVP_ blast vswitch at x% TX rate and measure throughput
-pvvp_cont             PVVP_ blast vswitch at x% TX rate and measure throughput
-phy2phy_scalability   Scalability0PacketLoss_ for Phy2Phy_
-pvp_tput              PacketLossRatio_ for PVP_
-pvp_back2back         BackToBackFrames_ for PVP_
-pvvp_tput             PacketLossRatio_ for PVVP_
-pvvp_back2back        BackToBackFrames_ for PVVP_
-phy2phy_cpu_load      CPU0PacketLoss_ for Phy2Phy_
-phy2phy_mem_load      Same as CPU0PacketLoss_ but using a memory intensive app
+phy2phy_tput          :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`Phy2Phy <Phy2Phy>`
+back2back             :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_tput_mod_vlan :ref:`PacketLossRatioFrameModification <PacketLossRatioFrameModification>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_cont          :ref:`Phy2Phy <Phy2Phy>` blast vswitch at x% TX rate and measure throughput
+pvp_cont              :ref:`PVP <PVP>` blast vswitch at x% TX rate and measure throughput
+pvvp_cont             :ref:`PVVP <PVVP>` blast vswitch at x% TX rate and measure throughput
+phy2phy_scalability   :ref:`Scalability0PacketLoss <Scalability0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
+pvp_tput              :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVP <PVP>`
+pvp_back2back         :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVP <PVP>`
+pvvp_tput             :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVVP <PVVP>`
+pvvp_back2back        :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVVP <PVVP>`
+phy2phy_cpu_load      :ref:`CPU0PacketLoss <CPU0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_mem_load      Same as :ref:`CPU0PacketLoss <CPU0PacketLoss>` but using a memory intensive app
 ===================== ===========================================================
 
 Supported deployment scenarios:
 
-* Phy2Phy_: Physical port -> vSwitch -> Physical port.
-* PVP_: Physical port -> vSwitch -> VNF -> vSwitch -> Physical port.
-* PVVP_: Physical port -> vSwitch -> VNF -> vSwitch -> VNF -> vSwitch ->
+* :ref:`Phy2Phy <Phy2Phy>`: Physical port -> vSwitch -> Physical port.
+* :ref:`PVP <PVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> Physical port.
+* :ref:`PVVP <PVVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> VNF -> vSwitch ->
   Physical port.
 
 Loopback applications in the Guest can be:
 
 * `DPDK testpmd <http://dpdk.org/doc/guides/testpmd_app_ug/index.html>`_.
 * Linux Bridge.
-* `l2fwd
-  <http://artifacts.opnfv.org/vswitchperf/docs/userguide/testusage.html#l2fwd-kernel-module>`_.
+* :ref:`l2fwd-module`
 
 Supported traffic generators:
 
@@ -44,19 +43,3 @@ Supported traffic generators:
 * Spirent.
 * Dummy.
 
-.. _PacketLossRatio: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-packetlossratio
-
-.. _BackToBackFrames: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-backtobackframes
-
-.. _PacketLossRatioFrameModification: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-packetlossratioframemodification
-
-.. _Scalability0PacketLoss: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-scalability-flows-rfc2544-0packetloss
-
-.. _CPU0PacketLoss: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-stress-rfc2544-0packetloss
-
-.. _Phy2Phy : http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-physical-port
-
-.. _PVP: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-vnf-vswitch-physical-port
-
-.. _PVVP: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-vnf-vswitch-vnf-vswitch-physical-port
-