summaryrefslogtreecommitdiffstats
path: root/docs/design
diff options
context:
space:
mode:
authorMartin Klozik <martinx.klozik@intel.com>2016-12-14 14:02:43 +0000
committerMartin Klozik <martinx.klozik@intel.com>2017-01-16 08:50:02 +0000
commit4481df385ac03ece015ccb429201f96189dc5ae2 (patch)
treea959a804e7b1efd663dbb24a447609421e339211 /docs/design
parentcafcb9f24b422a4b3a0b19ba00c83fe2819dcbaa (diff)
traffic: Configurable traffic details
Traffic generated by traffic generator is based on default values and their modifications specific to particular testing scenario. Traffic default values were defined inside VSPERF code and it was not possible to change them. This patch introduces new TRAFFIC dictionary inside 03_traffic.conf. Thus user can modify any of TRAFFIC values either in configuration file or by CLI or by 'Parameters' section of testcase definition. Following CLI options were obsoleted by this patch: 'bidirectional', 'traffic_type', 'iload', 'multistream', 'stream_type' and 'pre-installed_flows' Following CLI option was renamed to be consistent with other options: 'tunnel_type' => 'TUNNEL_TYPE' Following sections of testcase definition were obsoleted: "Traffic Type", "biDirectional", "MultiStream", "Stream Type", "Pre-installed Flows", "Flow Type" and "iLoad" New TRAFFIC dictionary should be used instead of old CLI options and old testcase definition sections. Testcase definitons, yardstick sample testcases and documentation were updated to reflect configuration changes. JIRA: VSPERF-433 Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Bill Michalowski <bmichalo@redhat.com> Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com> Reviewed-by: <sridhar.rao@spirent.com>
Diffstat (limited to 'docs/design')
-rw-r--r--docs/design/trafficgen_integration_guide.rst20
-rwxr-xr-xdocs/design/vswitchperf_design.rst124
2 files changed, 133 insertions, 11 deletions
diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst
index 9bb0e825..1457052b 100644
--- a/docs/design/trafficgen_integration_guide.rst
+++ b/docs/design/trafficgen_integration_guide.rst
@@ -81,29 +81,28 @@ Step 3 - configuration
All configuration values, required for correct traffic generator function, are passed
from VSPERF to the traffic generator in a dictionary. Default values shared among
-all traffic generators are defined in **tools/pkt_gen/trafficgen/trafficgenhelper.py**
-as **TRAFFIC_DEFAULTS** dictionary. Default values are loaded by **ITrafficGenerator**
-interface class automatically, so it is not needed to load them explicitly. In case
-that there are any traffic generator specific default values, then they should
-be set within class specific **__init__** function.
+all traffic generators are defined in **conf/03_traffic.conf** within **TRAFFIC**
+dictionary. Default values are loaded by **ITrafficGenerator** interface class
+automatically, so it is not needed to load them explicitly. In case that there are
+any traffic generator specific default values, then they should be set within class
+specific **__init__** function.
VSPERF passes test specific configuration within **traffic** dictionary to every
start and send function. So implementation of these functions must ensure,
that default values are updated with the testcase specific values. Proper merge
-of values is assured by call of **merge_spec** function from **trafficgenhelper**
-module.
+of values is assured by call of **merge_spec** function from **conf** module.
Example of **merge_spec** usage in **tools/pkt_gen/sample_tg/sample_tg.py** module:
.. code-block:: python
- from tools.pkt_gen.trafficgen.trafficgenhelper import merge_spec
+ from conf import merge_spec
def start_rfc2544_throughput(self, traffic=None, duration=30):
self._params = {}
self._params['traffic'] = self.traffic_defaults.copy()
if traffic:
- self._params['traffic'] = trafficgen.merge_spec(
+ self._params['traffic'] = merge_spec(
self._params['traffic'], traffic)
@@ -199,8 +198,7 @@ functions:
e.g. **rfc2544_throughput**, **rfc2544_continuous**
or **rfc2544_back2back**.
* param **frame_rate**: Defines desired percentage of frame
- rate used during continuous stream tests. It can be set by test
- parameter iLoad or by CLI parameter iload.
+ rate used during continuous stream tests.
* param **bidir**: Specifies if generated traffic will be full-duplex
(true) or half-duplex (false).
* param **multistream**: Defines number of flows simulated by traffic
diff --git a/docs/design/vswitchperf_design.rst b/docs/design/vswitchperf_design.rst
index 4f33a99f..96b97631 100755
--- a/docs/design/vswitchperf_design.rst
+++ b/docs/design/vswitchperf_design.rst
@@ -263,6 +263,130 @@ a section in the ``conf\10_custom.conf`` file that can be used.
.. _VSPERF installation scripts: http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html#other-requirements
+Configuration of TRAFFIC dictionary
+-----------------------------------
+
+TRAFFIC dictionary is used for configuration of traffic generator. Default values
+can be found in configuration file ``conf/03_traffic.conf``. These default values
+can be modified by (first option has the highest priorty):
+
+ 1. ``Parameters`` section of testcase defintion
+ 2. command line options specified by ``--test-params`` argument
+ 3. custom configuration file
+
+It is to note, that in case of option 1 and 2, it is possible to specify only
+values, which should be changed. In case of custom configuration file, it is
+required to specify whole ``TRAFFIC`` dictionary with its all values or explicitly
+call and update() method of ``TRAFFIC`` dictionary.
+
+Detailed description of ``TRAFFIC`` dictionary items follows:
+
+.. code-block:: console
+
+ 'traffic_type' - One of the supported traffic types.
+ E.g. rfc2544_throughput, rfc2544_back2back
+ or rfc2544_continuous
+ Data type: str
+ Default value: "rfc2544_throughput".
+ 'bidir' - Specifies if generated traffic will be full-duplex (True)
+ or half-duplex (False)
+ Data type: str
+ Supported values: "True", "False"
+ Default value: "False".
+ 'frame_rate' - Defines desired percentage of frame rate used during
+ continuous stream tests.
+ Data type: int
+ Default value: 100.
+ 'multistream' - Defines number of flows simulated by traffic generator.
+ Value 0 disables multistream feature
+ Data type: int
+ Supported values: 0-65535
+ Default value: 0.
+ 'stream_type' - Stream type is an extension of the "multistream" feature.
+ If multistream is disabled, then stream type will be
+ ignored. Stream type defines ISO OSI network layer used
+ for simulation of multiple streams.
+ Data type: str
+ Supported values:
+ "L2" - iteration of destination MAC address
+ "L3" - iteration of destination IP address
+ "L4" - iteration of destination port
+ of selected transport protocol
+ Default value: "L4".
+ 'pre_installed_flows'
+ - Pre-installed flows is an extension of the multistream"
+ feature. If multistream is disabled, then pre-installed
+ flows will be ignored. It defines if stream specific flows
+ will be inserted into OVS or not.
+ Data type: str
+ Supported values:
+ "Yes" - flows will be inserted into OVS
+ "No" - flows won't be inserted into OVS
+ Default value: "No".
+ 'flow_type' - Defines flows complexity.
+ Data type: str
+ Supported values:
+ "port" - flow is defined by ingress ports
+ "IP" - flow is defined by ingress ports
+ and src and dst IP addresses
+ Default value: "port"
+ 'l2' - A dictionary with l2 network layer details. Supported
+ values are:
+ 'srcmac' - Specifies source MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "00:00:00:00:00:00".
+ 'dstmac' - Specifies destination MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "00:00:00:00:00:00".
+ 'framesize' - Specifies default frame size. This value should not be
+ changed directly. It will be overridden during testcase
+ execution by values specified by list TRAFFICGEN_PKT_SIZES.
+ Data type: int
+ Default value: 64
+ 'l3' - A dictionary with l3 network layer details. Supported
+ values are:
+ 'srcip' - Specifies source MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "1.1.1.1".
+ 'dstip' - Specifies destination MAC address filled by traffic generator.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: str
+ Default value: "90.90.90.90".
+ 'proto' - Specifies deflaut protocol type.
+ Please check particular traffic generator implementation
+ for supported protocol types.
+ Data type: str
+ Default value: "udp".
+ 'l4' - A dictionary with l4 network layer details. Supported
+ values are:
+ 'srcport' - Specifies source port of selected transport protocol.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: int
+ Default value: 3000
+ 'dstport' - Specifies destination port of selected transport protocol.
+ NOTE: It can be modified by vsperf in some scenarios.
+ Data type: int
+ Default value: 3001
+ 'vlan' - A dictionary with vlan encapsulation details. Supported
+ values are:
+ 'enabled' - Specifies if vlan encapsulation should be enabled or
+ disabled.
+ Data type: bool
+ Default value: False
+ 'id' - Specifies vlan id.
+ Data type: int (NOTE: must fit to 12 bits)
+ Default value: 0
+ 'priority' - Specifies a vlan priority (PCP header field).
+ Data type: int (NOTE: must fit to 3 bits)
+ Default value: 0
+ 'cfi' - Specifies if frames can or cannot be dropped during
+ congestion (DEI header field).
+ Data type: int (NOTE: must fit to 1 bit)
+ Default value: 0
+
Configuration of GUEST options
------------------------------