summaryrefslogtreecommitdiffstats
path: root/conf/integration/01a_testcases_l34_vxlan.conf
diff options
context:
space:
mode:
authorMartin Klozik <martinx.klozik@intel.com>2017-06-02 13:56:57 +0100
committerMartin Klozik <martinx.klozik@intel.com>2017-08-04 09:54:47 +0100
commit6961a6fa333ca2cff055d7d7a889876263b673f5 (patch)
tree4e21c6bcf31b585411b9f201994a5e39675bca76 /conf/integration/01a_testcases_l34_vxlan.conf
parentd3b124a22bf3aa2c05a5cb030f37b97db3d27dbd (diff)
tests: L3, L4 and VxLAN tests for OVS & VPP
A set of tests was introduced with focus on L3, L4 and VxLAN performance of OVS and VPP. New testcases were created for phy2phy network scenario. In case of PVP and PVVP, only OVS testcases are available. Notes: * two sets of OVS P2P testcases were created, one creates unique flow for each IP address involved in the test (performance sensitive); Second set inserts just one flow with large network mask (tests with _mask suffix). * three different types of VPP P2P L3 testcases were created to demonstrate performance impact of multi ARP entries or IP routes. * VPP multi ARP record based testcases use a set of "workarounds" to load a large number of ARP entries. It is not possible to use "set ip arp count" syntax, as it doesn't work well for large count values (e.g. 60K) * OVS VxLAN testcases utilize existing OP2P deployment scenario and thus it can be used also with GRE and GENEVE tunnel types. Tunnel type to be used is defined by test configuration option "Tunnel Type". JIRA: VSPERF-518 Change-Id: I65adad976f12d8625d918a1996eb42693c511ee1 Signed-off-by: Martin Klozik <martinx.klozik@intel.com> Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Reviewed-by: Al Morton <acmorton@att.com> Reviewed-by: Christian Trautman <ctrautma@redhat.com> Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com> Reviewed-by: Trevor Cooper <trevor.cooper@intel.com> Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
Diffstat (limited to 'conf/integration/01a_testcases_l34_vxlan.conf')
-rw-r--r--conf/integration/01a_testcases_l34_vxlan.conf1007
1 files changed, 1007 insertions, 0 deletions
diff --git a/conf/integration/01a_testcases_l34_vxlan.conf b/conf/integration/01a_testcases_l34_vxlan.conf
new file mode 100644
index 00000000..17c0d6ff
--- /dev/null
+++ b/conf/integration/01a_testcases_l34_vxlan.conf
@@ -0,0 +1,1007 @@
+# Copyright 2017 Intel Corporation.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#
+# This file introduces a series of scalability testcases prepared for OVS
+# and VPP. Tests are unidirectional and they are focused on L3, L4 and VxLAN
+# switching performance.
+# Following test types are available:
+# 1) unique rule for each IP stream (OVS only)
+# 2) one rule for /8 netmask covering all streams
+# 3) unique ARP entry for each IP stream (VPP only)
+# 4) unique IP route for each IP stream (VPP only)
+#
+
+INTEGRATION_TESTS = INTEGRATION_TESTS + [
+ #
+ # L3 & L4 tests to compare OVS and VPP performance
+ #
+ # Example of execution:
+ # ./vsperf --test-params "TRAFFIC={'multistream':2000,'traffic_type':'rfc2544_continuous'}" \
+ # p2p_l3_multi_IP_ovs_mask p2p_l4_multi_PORT_ovs_mask
+ #
+ # ./vsperf --test-params "TRAFFIC={'multistream':8000,'traffic_type':'rfc2544_throughput'}" \
+ # p2p_l3_multi_IP_vpp p2p_l4_multi_PORT_vpp
+ {
+ "Name": "p2p_l3_multi_IP_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: P2P L3 multistream with unique flow for each IP stream",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['tools', 'exec_python',
+ 'import netaddr;'
+ 'cmds=open("/tmp/ovsofctl_cmds.txt","w");'
+ '[print("add nw_dst={} idle_timeout=0,dl_type=0x800,'
+ 'in_port=1,action=output:2".format('
+ 'netaddr.IPAddress(netaddr.IPAddress("$TRAFFIC["l3"]["dstip"]").value+i)),file=cmds) '
+ 'for i in range($TRAFFIC["multistream"])];'
+ 'cmds.close()'],
+ ['tools', 'exec_shell', "sudo $TOOLS['ovs-ofctl'] -O OpenFlow13 --bundle add-flows int_br0 /tmp/ovsofctl_cmds.txt"],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l3_multi_IP_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: P2P L3 multistream with 1 flow for /8 net mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0' }],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "pvp_l3_multi_IP_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: PVP L3 multistream with 1 flow for /8 net mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVP_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[4][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vnf', 'stop'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] + STEP_VSWITCH_PVP_FINIT
+ },
+ {
+ "Name": "pvvp_l3_multi_IP_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: PVVP L3 multistream with 1 flow for /8 net mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io', 'io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVVP_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[4][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[6][1]', 'dl_type': '0x800',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vnf2', 'stop'],
+ ['vnf1', 'stop'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_PVVP_FINIT
+ },
+ {
+ "Name": "p2p_l4_multi_PORT_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: P2P L4 multistream with unique flow for each IP stream",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['tools', 'exec_python',
+ 'import netaddr;'
+ 'cmds=open("/tmp/ovsofctl_cmds.txt","w");'
+ '[print("add nw_dst={} idle_timeout=0,dl_type=0x800,nw_proto=17,tp_src={},'
+ 'in_port=1,action=output:2".format('
+ 'netaddr.IPAddress(netaddr.IPAddress("$TRAFFIC["l3"]["dstip"]").value+i),'
+ '$TRAFFIC["l4"]["srcport"]),file=cmds) '
+ 'for i in range($TRAFFIC["multistream"])];'
+ 'cmds.close()'],
+ ['tools', 'exec_shell', "sudo $TOOLS['ovs-ofctl'] -O OpenFlow13 --bundle "
+ "add-flows int_br0 /tmp/ovsofctl_cmds.txt"],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l4_multi_PORT_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: P2P L4 multistream with 1 flow for /8 net and port mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800',
+ 'nw_proto': '17', 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "pvp_l4_multi_PORT_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: PVP L4 multistream flows for /8 net and port mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVP_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800', 'nw_proto': '17',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[4][1]', 'dl_type': '0x800', 'nw_proto': '17',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vnf', 'stop'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_PVP_FINIT
+ },
+ {
+ "Name": "pvvp_l4_multi_PORT_mask_ovs",
+ "Deployment": "clean",
+ "Description": "OVS: PVVP L4 multistream with flows for /8 net and port mask",
+ "vSwitch" : "OvsDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io', 'io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVVP_INIT +
+ [
+ ['vswitch', 'del_flow', 'int_br0'],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[1][1]', 'dl_type': '0x800',
+ 'nw_proto': '17', 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[4][1]', 'dl_type': '0x800', 'nw_proto': '17',
+ 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
+ ['vswitch', 'add_flow', 'int_br0',
+ {'in_port': '#STEP[6][1]', 'dl_type': '0x800',
+ 'nw_proto': '17', 'nw_dst': '$TRAFFIC["l3"]["dstip"]/8',
+ 'tp_src': '$TRAFFIC["l4"]["srcport"]',
+ 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'dump_flows', 'int_br0'],
+ ['vnf2', 'stop'],
+ ['vnf1', 'stop'],
+ ['vswitch', 'del_flow', 'int_br0'],
+ ] +
+ STEP_VSWITCH_PVVP_FINIT
+ },
+ {
+ "Name": "p2p_l3_multi_IP_arp_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L3 multistream with unique ARP entry for each IP stream",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '6.0.0.2',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 5.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.0.1/8']],
+ # count option of "set ip arp" command doesn't work reliably for huge
+ # count numbers, e.g. 100K
+ # it is both more reliale and faster to load batches of sigle
+ # ARP commands, although it also fails time to time
+ # NOTE: batch load of "set ip arp count" commands with lower
+ # count values (e.g. 1000) was also less reliable than using
+ # batches of signle arp entries
+ ['tools', 'exec_python',
+ 'import netaddr;'
+ 'dst_mac_value = netaddr.EUI("00:00:00:00:00:0A").value;'
+ 'cmds=open("/tmp/vppctl_cmds.txt","w");'
+ '[print("set ip arp #STEP[2][0] {} {}".format('
+ 'netaddr.IPAddress(netaddr.IPAddress("$TRAFFIC["l3"]["dstip"]").value+i),'
+ 'netaddr.EUI(dst_mac_value+i,dialect=netaddr.mac_unix_expanded)),file=cmds) '
+ 'for i in range($TRAFFIC["multistream"])];'
+ 'cmds.close()'],
+ ['tools', 'exec_shell', "rm -rf /tmp/vppctl_cmds_split*; split -l 1000 "
+ "/tmp/vppctl_cmds.txt /tmp/vppctl_cmds_split"],
+ ['tools', 'exec_shell', "for a in /tmp/vppctl_cmds_split* ; do echo $a ; "
+ "sudo $TOOLS['vppctl'] exec $a ; sleep 2 ; done"],
+ ['vswitch', 'run_vppctl', ['show ip fib summary']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l3_multi_IP_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L3 multistream with 1 route for /8 net mask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '5.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.3.1/24']],
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.3.2 00:00:00:00:00:0A']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 via 6.0.3.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l3_multi_IP_routes_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L3 multistream with unique route for each IP stream",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '5.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.3.1/24']],
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.3.2 00:00:00:00:00:0A']],
+ # insertion of huge number of IP routes doesn't cause issues
+ # seen with ARP entries at p2p_l3_multi_IP_vpp testcase
+ ['vswitch', 'run_vppctl', ['ip route add count $TRAFFIC["multistream"] '
+ '$TRAFFIC["l3"]["dstip"]/32 via 6.0.3.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib summary']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "pvp_l3_multi_IP_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: PVP L3 multistream with route for /8 netmask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '5.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVP_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set interface mac address #STEP[4][0] 00:00:00:00:00:11']],
+ # two separate tables are used, so the same IP network can be routed
+ # via different DST IPs to reach VM and trafficgen via 2nd phy NIC
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[1][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[3][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.1.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[3][0] 6.0.3.1/24']],
+ # route traffic to VM; Set DST MAC to MAC of 2nd (output) vhost user interface
+ # of VM, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[3][0] 6.0.3.2 00:00:00:00:00:11 fib-id 6']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 6 via 6.0.3.2']],
+
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[2][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[4][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[4][0] 6.0.4.1/24']],
+ # route traffic via 2nd phy NIC to reach trafficgen
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.2.2 00:00:00:00:00:0A fib-id 7']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 7 via 6.0.2.2']],
+
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FINIT
+ },
+ {
+ "Name": "pvvp_l3_multi_IP_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: PVVP L3 multistream with route for /8 netmask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io', 'io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '5.0.0.1',
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVVP_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set interface mac address #STEP[4][0] 00:00:00:00:00:11']],
+ ['vswitch', 'run_vppctl', ['set interface mac address #STEP[6][0] 00:00:00:00:00:12']],
+ # three separate tables are used, so the same IP network can be routed
+ # via different DST IPs to reach both VMs and trafficgen via 2nd phy NIC
+ # 1st table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[1][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[3][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.1.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[3][0] 6.0.3.1/24']],
+ # route traffic to 1st VM; Set DST MAC to MAC of 2nd (output) vhost user interface
+ # of VM1, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[3][0] 6.0.3.2 00:00:00:00:00:11 fib-id 6']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 6 via 6.0.3.2']],
+ # 2nd table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[4][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[5][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[4][0] 6.0.4.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[5][0] 6.0.5.1/24']],
+ # route traffic to 2nd VM; Set DST MAC to MAC of 2nd (output) vhost user interfacei
+ # of VM2, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[5][0] 6.0.5.2 00:00:00:00:00:12 fib-id 7']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 7 via 6.0.5.2']],
+ # 3rd table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[2][0] 8']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[6][0] 8']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[6][0] 6.0.6.1/24']],
+ # route traffic via 2nd phy NIC to reach trafficgen
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.2.2 00:00:00:00:00:0A fib-id 8']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 8 via 6.0.2.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FINIT
+ },
+ {
+ "Name": "p2p_l4_multi_PORT_arp_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L4 multistream with unique ARP entry for each IP stream and port check",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '6.0.2.2',
+ 'dstip': '5.0.0.2',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 5.0.0.1/8']],
+ ['tools', 'exec_python',
+ 'import netaddr;'
+ 'dst_mac_value = netaddr.EUI("00:00:00:00:00:0A").value;'
+ 'cmds=open("/tmp/vppctl_cmds.txt","w");'
+ '[print("set ip arp #STEP[2][0] {} {}".format('
+ 'netaddr.IPAddress(netaddr.IPAddress("$TRAFFIC["l3"]["dstip"]").value+i),'
+ 'netaddr.EUI(dst_mac_value+i,dialect=netaddr.mac_unix_expanded)),file=cmds) '
+ 'for i in range($TRAFFIC["multistream"])];'
+ 'cmds.close()'],
+ ['vswitch', 'run_vppctl',
+ ['set ip source-and-port-range-check vrf 7 $TRAFFIC["l3"]["srcip"]/24 '
+ 'port $TRAFFIC["l4"]["dstport"]']],
+ ['vswitch', 'run_vppctl',
+ ['set interface ip source-and-port-range-check #STEP[1][0] udp-out-vrf 7']],
+ ['tools', 'exec_shell', "rm -rf /tmp/vppctl_cmds_split*; split -l 1000 "
+ "/tmp/vppctl_cmds.txt /tmp/vppctl_cmds_split"],
+ ['tools', 'exec_shell', "for a in /tmp/vppctl_cmds_split* ; do echo $a ; "
+ "sudo $TOOLS['vppctl'] exec $a ; sleep 2 ; done"],
+ ['vswitch', 'run_vppctl', ['show ip fib summary']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l4_multi_PORT_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L4 multistream with 1 route for /8 net mask and port check",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '6.0.2.2',
+ 'dstip': '5.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.2.1/24']], # STEP 3
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.3.1/24']], # STEP 4
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.3.2 00:00:00:00:00:0A']], # STEP 5
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 via 6.0.3.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['vswitch', 'run_vppctl',
+ ['set ip source-and-port-range-check vrf 7 $TRAFFIC["l3"]["srcip"]/24 '
+ 'port $TRAFFIC["l4"]["dstport"]']],
+ ['vswitch', 'run_vppctl',
+ ['set interface ip source-and-port-range-check #STEP[1][0] udp-out-vrf 7']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "p2p_l4_multi_PORT_routes_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: P2P L4 multistream with unique route for each IP stream and port check",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '6.0.2.2',
+ 'dstip': '5.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.3.1/24']],
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.3.2 00:00:00:00:00:0A']],
+ # insertion of huge number of IP routes doesn't cause issues
+ # seen with ARP entries at p2p_l3_multi_IP_vpp testcase
+ ['vswitch', 'run_vppctl',
+ ['ip route add count $TRAFFIC["multistream"] $TRAFFIC["l3"]["dstip"]/32 via 6.0.3.2']],
+ ['vswitch', 'run_vppctl',
+ ['set ip source-and-port-range-check vrf 7 $TRAFFIC["l3"]["srcip"]/24 '
+ 'port $TRAFFIC["l4"]["dstport"]']],
+ ['vswitch', 'run_vppctl',
+ ['set interface ip source-and-port-range-check #STEP[1][0] udp-out-vrf 7']],
+ ['vswitch', 'run_vppctl', ['show ip fib summary']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "pvp_l4_multi_PORT_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: PVP L4 multistream with route for /8 net and port mask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '4.0.0.1',
+ 'dstip': '5.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVP_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int mac address #STEP[4][0] 00:00:00:00:00:11']],
+ # create table for port check
+ ['vswitch', 'run_vppctl', ['set ip source-and-port-range-check vrf 5 '
+ '$TRAFFIC["l3"]["srcip"]/24 '
+ 'port $TRAFFIC["l4"]["dstport"]']],
+ # two separate tables are used, so the same IP network can be routed
+ # via different DST IPs to reach VM and trafficgen via 2nd phy NIC
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[1][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[3][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.1.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[3][0] 6.0.3.1/24']],
+ # enforce port check
+ ['vswitch', 'run_vppctl', ['set int ip source-and-port-range-check #STEP[1][0] '
+ 'udp-out-vrf 5']],
+ # route traffic to VM; Set DST MAC to MAC of 2nd (output) vhost user interface
+ # of VM, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[3][0] 6.0.3.2 00:00:00:00:00:11 fib-id 6']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 6 via 6.0.3.2']],
+
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[2][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[4][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[4][0] 6.0.4.1/24']],
+ # route traffic via 2nd phy NIC to reach trafficgen
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.2.2 00:00:00:00:00:0A fib-id 7']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 7 via 6.0.2.2']],
+
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['vnf', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ['vnf', 'stop'],
+ ] +
+ STEP_VSWITCH_PVP_FINIT
+ },
+ {
+ "Name": "pvvp_l4_multi_PORT_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: PVVP L4 multistream with route for /8 net and port mask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "GUEST_TESTPMD_FWD_MODE" : ['io', 'io'],
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'srcip': '4.0.0.1',
+ 'dstip': '5.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ 'srcport': 7,
+ 'dstport': 8,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_PVVP_INIT +
+ [
+ ['vswitch', 'run_vppctl', ['set int mac address #STEP[4][0] 00:00:00:00:00:11']],
+ ['vswitch', 'run_vppctl', ['set int mac address #STEP[6][0] 00:00:00:00:00:12']],
+ # create table for port check
+ ['vswitch', 'run_vppctl', ['set ip source-and-port-range-check vrf 5 '
+ '$TRAFFIC["l3"]["srcip"]/24 port $TRAFFIC["l4"]["dstport"]']],
+ # three separate tables are used, so the same IP network can be routed
+ # via different DST IPs to reach both VMs and trafficgen via 2nd phy NIC
+ # 1st table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[1][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[3][0] 6']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[1][0] 6.0.1.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[3][0] 6.0.3.1/24']],
+ # enforce port check
+ ['vswitch', 'run_vppctl', ['set int ip source-and-port-range-check #STEP[1][0] udp-out-vrf 5']],
+ # route traffic to 1st VM; Set DST MAC to MAC of 2nd (output) vhost user interface
+ # of VM1, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[3][0] 6.0.3.2 00:00:00:00:00:11 fib-id 6']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 6 via 6.0.3.2']],
+ # 2nd table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[4][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[5][0] 7']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[4][0] 6.0.4.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[5][0] 6.0.5.1/24']],
+ # route traffic to 2nd VM; Set DST MAC to MAC of 2nd (output) vhost user interfacei
+ # of VM2, so traffic is accepted by VPP in next table
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[5][0] 6.0.5.2 00:00:00:00:00:12 fib-id 7']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 7 via 6.0.5.2']],
+ # 3rd table
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[2][0] 8']],
+ ['vswitch', 'run_vppctl', ['set int ip table #STEP[6][0] 8']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[2][0] 6.0.2.1/24']],
+ ['vswitch', 'run_vppctl', ['set int ip address #STEP[6][0] 6.0.6.1/24']],
+ # route traffic via 2nd phy NIC to reach trafficgen
+ ['vswitch', 'run_vppctl', ['set ip arp #STEP[2][0] 6.0.2.2 00:00:00:00:00:0A fib-id 8']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 table 8 via 6.0.2.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['vnf1', 'start'],
+ ['vnf2', 'start'],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ['vnf1', 'stop'],
+ ['vnf2', 'stop'],
+ ] +
+ STEP_VSWITCH_PVVP_FINIT
+ },
+ #
+ # End of L3 & L4 tests to compare OVS and VPP performance
+ #
+ #
+ # VxLAN tests to compare OVS and VPP performance
+ #
+ # Example of execution:
+ # ./vsperf --test-params "TRAFFIC={'multistream':2000,'traffic_type':'rfc2544_continuous'}" \
+ # vxlan_multi_IP_vpp
+ {
+ "Name": "vxlan_multi_IP_mask_ovs",
+ "Deployment": "op2p",
+ "Tunnel Type": "vxlan",
+ "Tunnel Operation": "encapsulation",
+ "Description": "OVS: VxLAN L3 multistream",
+ "Parameters": {
+ "TRAFFICGEN_IXNET_TCL_SCRIPT" : "ixnetrfc2544v2.tcl",
+ "TRAFFICGEN_PORT1_MAC" : '00:00:00:00:00:01',
+ "TRAFFICGEN_PORT2_MAC" : '#PARAM(NICS[0]["mac"])',
+ "TRAFFICGEN_PORT1_IP" : '9.0.0.2',
+ "TRAFFICGEN_PORT2_IP" : '10.0.0.2',
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ },
+ },
+ "TestSteps": [
+ ['vswitch', 'del_flow', 'br0', {'in_port': '1'}],
+ ['vswitch', 'add_flow', 'br0',
+ {'in_port': '1', 'dl_type': '0x800', 'nw_proto': '17',
+ 'nw_dst': '$TRAFFICGEN_PORT2_IP/8', 'actions': ['output:2'],
+ 'idle_timeout': '0'}],
+ ['vswitch', 'dump_flows', 'br0'],
+ ['vswitch', 'dump_flows', 'br-ext'],
+ ],
+ },
+ {
+ "Name": "vxlan_multi_IP_arp_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: VxLAN L3 multistream with unique ARP entry for each IP stream",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '10.0.0.2',
+ },
+ 'l4': {
+ 'enabled': True,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl',
+ ['set int ip address #STEP[1][0] 9.0.0.1/16']],
+ ['vswitch', 'run_vppctl',
+ ['set int ip address #STEP[2][0] 11.0.0.1/16']],
+ ['vswitch', 'run_vppctl',
+ ['create vxlan tunnel src 11.0.0.1 dst 11.0.0.2 vni 1']],
+ ['vswitch', 'run_vppctl',
+ ['set int state vxlan_tunnel0 up']],
+ ['vswitch', 'run_vppctl',
+ ['set int ip address vxlan_tunnel0 10.0.0.1/8']],
+ ['vswitch', 'run_vppctl',
+ ['set ip arp #STEP[2][0] 11.0.0.2 00:00:00:00:00:00']],
+ ['tools', 'exec_python',
+ 'import netaddr;'
+ 'dst_mac_value = netaddr.EUI("00:00:00:00:00:0A").value;'
+ 'cmds=open("/tmp/vppctl_cmds.txt","w");'
+ '[print("set ip arp vxlan_tunnel0 {} {}".format('
+ 'netaddr.IPAddress(netaddr.IPAddress("$TRAFFIC["l3"]["dstip"]").value+i),'
+ 'netaddr.EUI(dst_mac_value+i,dialect=netaddr.mac_unix_expanded)),file=cmds) '
+ 'for i in range($TRAFFIC["multistream"])];'
+ 'cmds.close()'],
+ ['tools', 'exec_shell',
+ "rm -rf /tmp/vppctl_cmds_split*;"
+ "split -l 1000 /tmp/vppctl_cmds.txt /tmp/vppctl_cmds_split"],
+ ['tools', 'exec_shell',
+ "for a in /tmp/vppctl_cmds_split* ; do "
+ "echo $a ; sudo $TOOLS['vppctl'] exec $a ; sleep 2 ; done"],
+ ['vswitch', 'run_vppctl', ['show ip fib summary']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ {
+ "Name": "vxlan_multi_IP_mask_vpp",
+ "Deployment": "clean",
+ "Description": "VPP: VxLAN L3 multistream with 1 route for /8 netmask",
+ "vSwitch" : "VppDpdkVhost",
+ "Parameters" : {
+ "TRAFFIC" : {
+ 'bidir' : 'False',
+ "stream_type" : "L3",
+ 'l2': {
+ 'dstmac' : '#PARAM(NICS[0]["mac"])',
+ },
+ 'l3': {
+ 'enabled': True,
+ 'proto': 'udp',
+ 'dstip': '8.0.0.1',
+ },
+ 'l4': {
+ 'enabled': True,
+ },
+ },
+ },
+ "TestSteps":
+ STEP_VSWITCH_P2P_INIT +
+ [
+ ['vswitch', 'run_vppctl',
+ ['set int ip address #STEP[1][0] 9.0.0.1/16']],
+ ['vswitch', 'run_vppctl',
+ ['set int ip address #STEP[2][0] 11.0.0.1/16']],
+ ['vswitch', 'run_vppctl',
+ ['create vxlan tunnel src 11.0.0.1 dst 11.0.0.2 vni 1']],
+ ['vswitch', 'run_vppctl',
+ ['set int state vxlan_tunnel0 up']],
+ ['vswitch', 'run_vppctl',
+ ['set int ip address vxlan_tunnel0 10.0.0.1/24']],
+ ['vswitch', 'run_vppctl',
+ ['set ip arp #STEP[2][0] 11.0.0.2 00:00:00:00:00:00']],
+ ['vswitch', 'run_vppctl',
+ ['set ip arp vxlan_tunnel0 10.0.0.2 00:00:00:00:00:0A']],
+ ['vswitch', 'run_vppctl', ['ip route add $TRAFFIC["l3"]["dstip"]/8 via 10.0.0.2']],
+ ['vswitch', 'run_vppctl', ['show ip fib']],
+ ['trafficgen', 'send_traffic', {}],
+ ['vswitch', 'run_vppctl', ['show interfaces']],
+ ] +
+ STEP_VSWITCH_P2P_FINIT
+ },
+ #
+ # End of VxLAN tests to compare OVS and VPP performance
+ #
+]