docs: Remove hyperlinks to docs in artifacts

It is possible to use sphinx cross referencing
feature in case, that only one level of toctree
is used. Thus documentation was reorganized
to utilize just one top level index with toctree.
After that it was possible to use rst native syntax
to create a cross links among vsperf documentation
chapters. As a result only 2 hyperlinks to the
yardstick documentation are version specific.

JIRA: VSPERF-442

Change-Id: I15c2f53922e88765506448de61af4a299f5d53c5
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Martin Goldammer <martinx.goldammer@intel.com>
Reviewed-by: Trevor Cooper <trevor.cooper@intel.com>

20 files changed, 172 insertions, 215 deletions

diff --git a/docs/configguide/index.rst b/docs/configguide/index.rst
deleted file mode 100644
index b4c8575e..00000000
--- a/docs/configguide/index.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-******************************
-VSPERF Installation Guide
-******************************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   installation.rst
-   upgrade.rst
-   trafficgen.rst
diff --git a/docs/configguide/installation.rst b/docs/configguide/installation.rst
index dd74f293..0578f15b 100644
--- a/docs/configguide/installation.rst
+++ b/docs/configguide/installation.rst
@@ -2,6 +2,8 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
+.. _vsperf-installation:
+
 ======================
 Installing vswitchperf
 ======================
@@ -120,6 +122,8 @@ Changelog of vloop-vnf:
 
     * version with development tools required for build of DPDK and l2fwd
 
+.. _vsperf-installation-script:
+
 Installation
 ------------
 
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index d1880f00..3c33d4ef 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -2,6 +2,8 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
+.. _trafficgen-installation:
+
 ===========================
 'vsperf' Traffic Gen Guide
 ===========================
@@ -87,6 +89,8 @@ commandline above to:
     $ ./vsperf --test-params "TRAFFICGEN_PKT_SIZES=(x,y);TRAFFICGEN_DURATION=10;" \
                              "TRAFFICGEN_RFC2544_TESTS=1" $TESTNAME
 
+.. _trafficgen-dummy:
+
 Dummy
 -----
 
diff --git a/docs/configguide/upgrade.rst b/docs/configguide/upgrade.rst
index 3a970c6a..cf92572c 100644
--- a/docs/configguide/upgrade.rst
+++ b/docs/configguide/upgrade.rst
@@ -120,9 +120,7 @@ options:
 
 In case that any of these options is defined, then configuration must be updated.
 All paths to the tools are now stored inside ``PATHS`` dictionary. Please
-refer to the paths-documentation_ and update your configuration where necessary.
-
-.. _paths-documentation: http://artifacts.opnfv.org/vswitchperf/docs/index.html#configuration-of-paths-dictionary
+refer to the :ref:`paths-documentation` and update your configuration where necessary.
 
 Configuration change via CLI
 ============================
@@ -134,7 +132,7 @@ possible to modify any configuration parameter via CLI or via **Parameters**
 section of the testcase definition. Old configuration options were obsoleted
 and it is required to specify configuration parameter name in the same form
 as it is defined inside configuration file, i.e. in uppercase. Please
-refer to the overriding-parameters-documentation_ for additional details.
+refer to the :ref:`overriding-parameters-documentation` for additional details.
 
 **NOTE:** In case that execution of VSPERF is automated by scripts (e.g. for
 CI purposes), then these scripts must be checked and updated too. It means,
@@ -154,12 +152,9 @@ match to data types of original values from configuration files.
 
 In case that ``guest_nic1_name`` or ``guest_nic2_name`` is changed,
 then new dictionary ``GUEST_NICS`` must be modified accordingly.
-Please see guest-configuration_ and ``conf/04_vnf.conf`` for additional
+Please see :ref:`configuration-of-guest-options` and ``conf/04_vnf.conf`` for additional
 details.
 
-.. _overriding-parameters-documentation: http://artifacts.opnfv.org/vswitchperf/docs/index.html#overriding-values-defined-in-configuration-files
-.. _guest-configuration: http://artifacts.opnfv.org/vswitchperf/docs/index.html#configuration-of-guest-options
-
 Traffic configuration via CLI
 =============================
 
@@ -167,7 +162,7 @@ In previous releases it was possible to modify selected attributes of generated
 traffic via command line interface. This concept has been enhanced in Danube
 release and it is now possible to modify all traffic specific options via
 CLI or by ``TRAFFIC`` dictionary in configuration file. Detailed description
-is available at configuration-of-traffic-dictionary_ section of documentation.
+is available at :ref:`configuration-of-traffic-dictionary` section of documentation.
 
 Please check your automated scripts for VSPERF execution for following CLI
 parameters and update them according to the documentation:
@@ -186,4 +181,3 @@ parameters and update them according to the documentation:
    stream_type
    traffic_type
 
-.. _configuration-of-traffic-dictionary: http://artifacts.opnfv.org/vswitchperf/docs/index.html#configuration-of-traffic-dictionary
diff --git a/docs/design/index.rst b/docs/design/index.rst
deleted file mode 100644
index a8a076f4..00000000
--- a/docs/design/index.rst
+++ /dev/null
@@ -1,15 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-**************
-VSPERF Design
-**************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   vswitchperf_design.rst
-
-   trafficgen_integration_guide.rst
diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst
index 1457052b..382cedcb 100644
--- a/docs/design/trafficgen_integration_guide.rst
+++ b/docs/design/trafficgen_integration_guide.rst
@@ -11,8 +11,7 @@ Intended Audience
 
 This document is intended to aid those who want to integrate new traffic
 generator into the vsperf code. It is expected, that reader has already
-read generic part of `VSPERF Design Document
-<http://artifacts.opnfv.org/vswitchperf/docs/design/index.html>`__.
+read generic part of :ref:`vsperf-design`.
 
 Let us create a sample traffic generator called **sample_tg**, step by step.
 
@@ -132,6 +131,8 @@ Example in **tools/pkt_gen/sample_tg/sample_tg.py** module:
     def disconnect(self):
         pass
 
+.. _step-5-supported-traffic-types:
+
 Step 5 - supported traffic types
 ================================
 
@@ -192,7 +193,7 @@ functions:
       which are not listed below.
 
       Note: There are parameters specific to testing of tunnelling protocols,
-      which are discussed in detail at `integration tests userguide`_
+      which are discussed in detail at :ref:`integration-tests` userguide.
 
       * param **traffic_type**: One of the supported traffic types,
         e.g. **rfc2544_throughput**, **rfc2544_continuous**
@@ -235,5 +236,3 @@ are defined in **ResultsConstants** implemented in
 Throughput & Continuous and for Back2Back. The same key names should
 be used by all traffic generator implementations.
 
-.. _integration tests userguide: http://artifacts.opnfv.org/vswitchperf/docs/userguide/integration.html
-
diff --git a/docs/design/vswitchperf_design.rst b/docs/design/vswitchperf_design.rst
index bf82f9b8..9e74e599 100644
--- a/docs/design/vswitchperf_design.rst
+++ b/docs/design/vswitchperf_design.rst
@@ -2,6 +2,8 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
+.. _vsperf-design:
+
 ======================
 VSPERF Design Document
 ======================
@@ -63,6 +65,7 @@ This is a typical flow of control for a test.
 
 .. image:: vsperf.png
 
+.. _design-configuration:
 
 Configuration
 =============
@@ -101,11 +104,13 @@ The values in the file specified by ``--conf-file`` takes precedence over all
 the other configuration files and does not have to follow the naming
 convention.
 
+.. _paths-documentation:
+
 Configuration of PATHS dictionary
 ---------------------------------
 
 VSPERF uses external tools like Open vSwitch and Qemu for execution of testcases. These
-tools may be downloaded and built automatically by `VSPERF installation scripts`_
+tools may be downloaded and built automatically (see :ref:`vsperf-installation-script`)
 or installed manually by user from binary packages. It is also possible to use a combination
 of both approaches, but it is essential to correctly set paths to all required tools.
 These paths are stored within a PATHS dictionary, which is evaluated before execution
@@ -261,7 +266,7 @@ Note: In case of RHEL 7.3 OS usage, binary package configuration is required
 for Vanilla OVS tests. With the installation of a supported rpm for OVS there is
 a section in the ``conf\10_custom.conf`` file that can be used.
 
-.. _VSPERF installation scripts: http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html#other-requirements
+.. _configuration-of-traffic-dictionary:
 
 Configuration of TRAFFIC dictionary
 -----------------------------------
@@ -388,6 +393,8 @@ Detailed description of ``TRAFFIC`` dictionary items follows:
                       Data type: int (NOTE: must fit to 1 bit)
                       Default value: 0
 
+.. _configuration-of-guest-options:
+
 Configuration of GUEST options
 ------------------------------
 
diff --git a/docs/index.rst b/docs/index.rst
index bce2aa61..b81ef1cb 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -21,16 +21,72 @@ Platform and VNF level testing and validation.
 * Project Artifacts: https://artifacts.opnfv.org/vswitchperf.html
 * Continuous Integration https://build.opnfv.org/ci/view/vswitchperf/
 
+******************************
+VSPERF Installation Guide
+******************************
+
 .. toctree::
-   :maxdepth: 3
+   :caption: VSPERF Installation Guide
+   :maxdepth: 5
+   :numbered: 5
+
+   ./configguide/installation.rst
+   ./configguide/upgrade.rst
+   ./configguide/trafficgen.rst
+
+******************************
+VSPERF User Guide
+******************************
+
+.. toctree::
+   :caption: VSPERF User Guide
+   :maxdepth: 5
+   :numbered: 5
+
+   ./userguide/testusage.rst
+   ./userguide/teststeps.rst
+   ./userguide/integration.rst
+   Yardstick integration <./userguide/yardstick.rst>
+
+**************
+VSPERF Design
+**************
+
+.. toctree::
+   :caption: VSPERF Design
+   :maxdepth: 5
+   :numbered: 5
+
+   ./design/vswitchperf_design.rst
+   ./design/trafficgen_integration_guide.rst
+
+*******************
+VSPERF Requirements
+*******************
+
+.. toctree::
+   :caption: VSPERF Requirements
+   :maxdepth: 5
    :numbered: 5
 
-   ./configguide/index.rst
-   ./userguide/index.rst
-   ./design/index.rst
-   ./requirements/index.rst
-   ./release/index.rst
-   ./results/index.rst
+   ./requirements/vswitchperf_ltp.rst
+   ./requirements/vswitchperf_ltd.rst
+
+.. toctree::
+   :titlesonly:
+   :maxdepth: 3
+
+   ./release/NEWS.rst
+
+**************
+VSPERF Results
+**************
+
+.. toctree::
+   :maxdepth: 3
+
+   ./results/scenario.rst
+   ./results/results.rst
 
 Indices
 =======
diff --git a/docs/release/NEWS.rst b/docs/release/NEWS.rst
index a31e2738..45eafd00 100644
--- a/docs/release/NEWS.rst
+++ b/docs/release/NEWS.rst
@@ -2,6 +2,10 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
+***********
+VSPERF News
+***********
+
 OPNFV Danube Release
 ====================
 
diff --git a/docs/release/index.rst b/docs/release/index.rst
deleted file mode 100644
index bf0b9d18..00000000
--- a/docs/release/index.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-***********
-VSPERF News
-***********
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   NEWS.rst
diff --git a/docs/requirements/index.rst b/docs/requirements/index.rst
deleted file mode 100644
index 311ddb07..00000000
--- a/docs/requirements/index.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. toctree::
-   :maxdepth: 3
-   :numbered: 5
-
-   vswitchperf_ltp.rst
-   vswitchperf_ltd.rst
-
diff --git a/docs/requirements/vswitchperf_ltd.rst b/docs/requirements/vswitchperf_ltd.rst
index 69497c5c..e1372520 100644
--- a/docs/requirements/vswitchperf_ltd.rst
+++ b/docs/requirements/vswitchperf_ltd.rst
@@ -127,6 +127,8 @@ expected that more will be added.
 
 .. 3.2.2.1.1
 
+.. _PacketLossRatio:
+
 Test ID: LTD.Throughput.RFC2544.PacketLossRatio
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -144,8 +146,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatio
 
     Note: Other values can be tested if required by the user.
 
-    The selected frame sizes are those previously defined under `Default
-    Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    The selected frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
     The test can also be used to determine the average latency of the traffic.
 
     Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
@@ -178,6 +180,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatio
 
 .. 3.2.2.1.2
 
+.. _PacketLossRatioFrameModification:
+
 Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -196,8 +200,8 @@ Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification
 
     Note: Other values can be tested if required by the user.
 
-    The selected frame sizes are those previously defined under `Default
-    Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    The selected frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
     The test can also be used to determine the average latency of the traffic.
 
     Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
@@ -267,8 +271,8 @@ Test ID: LTD.Throughput.RFC2544.Profile
     and latency as the offered rate increases is slow and graceful or sudden
     and severe.
 
-    The selected frame sizes are those previously defined under `Default
-    Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    The selected frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
 
     The offered traffic rate is described as a percentage delta with respect
     to the DUT's RFC 2544 Throughput as determined by
@@ -319,8 +323,7 @@ Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime
     The aim of this test is to determine the length of time it takes the DUT
     to recover from an overload condition for a constant load (fixed length
     frames at a fixed interval time). The selected frame sizes are those
-    previously defined under `Default Test Parameters
-    <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__,
+    previously defined under :ref:`default-test-parameters`,
     traffic should be sent to the DUT under normal conditions. During the
     duration of the test and while the traffic flows are passing though the
     DUT, at least one situation leading to an overload condition for the DUT
@@ -359,6 +362,8 @@ Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime
 
 .. 3.2.2.1.5
 
+.. _BackToBackFrames:
+
 Test ID: LTD.Throughput.RFC2544.BackToBackFrames
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -372,9 +377,7 @@ Test ID: LTD.Throughput.RFC2544.BackToBackFrames
 
     The aim of this test is to characterize the ability of the DUT to
     process back-to-back frames. For each frame size previously defined
-    under `Default Test Parameters
-    <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__,
-    a burst of traffic
+    under :ref:`default-test-parameters`, a burst of traffic
     is sent to the DUT with the minimum inter-frame gap between each frame.
     If the number of received frames equals the number of frames that were
     transmitted, the burst size should be increased and traffic is sent to
@@ -527,8 +530,7 @@ Test ID: LTD.Throughput.RFC6201.ResetTime
 
     Both reset methods SHOULD be exercised.
 
-    For each frame size previously defined under `Default Test
-    Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__,
+    For each frame size previously defined under :ref:`default-test-parameters`,
     traffic should be sent to the DUT under
     normal conditions. During the duration of the test and while the traffic
     flows are passing through the DUT, the DUT should be reset and the Reset
@@ -613,8 +615,7 @@ Test ID: LTD.Throughput.RFC2889.MaxForwardingRate
     This test measures the DUT's Max Forwarding Rate when the Offered Load
     is varied between the throughput and the Maximum Offered Load for fixed
     length frames at a fixed time interval. The selected frame sizes are
-    those previously defined under `Default Test
-    Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    those previously defined under :ref:`default-test-parameters`.
     The throughput is the maximum offered
     load with 0% frame loss (measured by the prerequisite test), and the
     Maximum Offered Load (as defined by
@@ -749,8 +750,7 @@ Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding
 
     The aim of this test is to determine the maximum forwarding rate of the
     DUT when forwarding broadcast traffic. For each frame previously defined
-    under `Default Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__,
-    the traffic should
+    under :ref:`default-test-parameters`, the traffic should
     be set up as broadcast traffic. The traffic throughput of the DUT should
     be measured.
 
@@ -917,8 +917,8 @@ Test ID: LTD.Throughput.Overlay.Network.<tech>.RFC2544.PacketLossRatio
       - De-encapsulate the packet, if required
       - Switch the packet to the correct port
 
-    The selected frame sizes are those previously defined under `Default
-    Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    The selected frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
 
     Thus, each test comprises an overlay technology, a network function,
     and a packet size *with* overlay network overhead included
@@ -1041,8 +1041,8 @@ Test ID: LTD.Throughput.RFC2544.MatchAction.PacketLossRatio
 
     The default loss percentages to be tested are: - X = 0% - X = 10^-7%
     Other values can be tested if required by the user. The selected
-    frame sizes are those previously defined under `Default Test Parameters
-    <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
 
     The test can also be used to determine the average latency of the
     traffic when a match action is applied to packets in a flow. Under
@@ -1189,6 +1189,8 @@ It is expected that more will be added.
 
 .. 3.2.2.3.1
 
+.. _Scalability0PacketLoss:
+
 Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -1207,8 +1209,7 @@ Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss
     through the fastpath, as such the flows need to be installed on the DUT
     before passing traffic.
 
-    For each frame size previously defined under `Default Test
-    Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__
+    For each frame size previously defined under :ref:`default-test-parameters`
     and for each of the following number of flows:
 
     -  1,000
@@ -1336,8 +1337,8 @@ Test ID: LTD.Scalability.VNF.RFC2544.PacketLossRatio
     would be to continue to add VNFs without bringing down the DUT. The
     approach used needs to be documented as part of the test report.
 
-    The selected frame sizes are those previously defined under `Default
-    Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    The selected frame sizes are those previously defined under
+    :ref:`default-test-parameters`.
     The test can also be used to determine the average latency of the traffic.
 
     Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
@@ -1397,8 +1398,8 @@ Test ID: LTD.Scalability.VNF.RFC2544.PacketLossProfile
      and graceful, or sudden and severe. The minimum number of VNFs to
      be tested is 3.
 
-     The selected frame sizes are those previously defined under `Default
-     Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+     The selected frame sizes are those previously defined under
+     :ref:`default-test-parameters`.
 
      The offered traffic rate is described as a percentage delta with respect
      to the DUT's RFC 2544 Throughput as determined by
@@ -1479,8 +1480,7 @@ Test ID: LTD.Activation.RFC2889.AddressCachingCapacity
     MAC learning. The aim of this test is to determine the address caching
     capacity of the DUT for a constant load (fixed length frames at a fixed
     interval time). The selected frame sizes are those previously defined
-    under `Default Test Parameters
-    <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__.
+    under :ref:`default-test-parameters`.
 
     In order to run this test the aging time, that is the maximum time the
     DUT will keep a learned address in its flow table, and a set of initial
@@ -1533,8 +1533,7 @@ Test ID: LTD.Activation.RFC2889.AddressLearningRate
     MAC learning. The aim of this test is to determine the rate of address
     learning of the DUT for a constant load (fixed length frames at a fixed
     interval time). The selected frame sizes are those previously defined
-    under `Default Test Parameters <http://artifacts.opnfv.org/vswitchperf/docs/index.html#default-test-parameters>`__,
-    traffic should be
+    under :ref:`default-test-parameters`, traffic should be
     sent with each IPv4/IPv6 address incremented by one. The rate at which
     the DUT learns a new address should be measured. The maximum caching
     capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken
@@ -1626,6 +1625,8 @@ should be required. It is expected that more will be added.
 
 .. 3.2.2.6.1
 
+.. _CPU0PacketLoss:
+
 Test ID: LTD.Stress.RFC2544.0PacketLoss
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/docs/requirements/vswitchperf_ltp.rst b/docs/requirements/vswitchperf_ltp.rst
index 14303de5..2b74d676 100644
--- a/docs/requirements/vswitchperf_ltp.rst
+++ b/docs/requirements/vswitchperf_ltp.rst
@@ -303,6 +303,8 @@ datapaths to physical ports (to NICs) and to logical ports (to VNFs):
 
 .. 3.2.5.1.1
 
+.. _Phy2Phy:
+
 Physical port → vSwitch → physical port
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 .. code-block:: console
@@ -326,6 +328,8 @@ Physical port → vSwitch → physical port
 
 .. 3.2.5.1.2
 
+.. _PVP:
+
 Physical port → vSwitch → VNF → vSwitch → physical port
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 .. code-block:: console
@@ -365,6 +369,8 @@ Physical port → vSwitch → VNF → vSwitch → physical port
 
 .. 3.2.5.1.3
 
+.. _PVVP:
+
 Physical port → vSwitch → VNF → vSwitch → VNF → vSwitch → physical port
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -639,6 +645,8 @@ Suitable real Telco workload VNFs are yet to be identified.
 
 .. 3.2.5.2.1
 
+.. _default-test-parameters:
+
 Default Test Parameters
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/docs/results/index.rst b/docs/results/index.rst
deleted file mode 100644
index 04899b5a..00000000
--- a/docs/results/index.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-**************
-VSPERF Results
-**************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   scenario.rst
-   results.rst
diff --git a/docs/results/scenario.rst b/docs/results/scenario.rst
index cb42c8dc..49ff626a 100644
--- a/docs/results/scenario.rst
+++ b/docs/results/scenario.rst
@@ -9,34 +9,33 @@ Available Tests and aspects of scenarios:
 ===================== ===========================================================
    Framework Test                          Definition
 ===================== ===========================================================
-phy2phy_tput          PacketLossRatio_ for Phy2Phy_
-back2back             BackToBackFrames_ for Phy2Phy_
-phy2phy_tput_mod_vlan PacketLossRatioFrameModification_ for Phy2Phy_
-phy2phy_cont          Phy2Phy_ blast vswitch at x% TX rate and measure throughput
-pvp_cont              PVP_ blast vswitch at x% TX rate and measure throughput
-pvvp_cont             PVVP_ blast vswitch at x% TX rate and measure throughput
-phy2phy_scalability   Scalability0PacketLoss_ for Phy2Phy_
-pvp_tput              PacketLossRatio_ for PVP_
-pvp_back2back         BackToBackFrames_ for PVP_
-pvvp_tput             PacketLossRatio_ for PVVP_
-pvvp_back2back        BackToBackFrames_ for PVVP_
-phy2phy_cpu_load      CPU0PacketLoss_ for Phy2Phy_
-phy2phy_mem_load      Same as CPU0PacketLoss_ but using a memory intensive app
+phy2phy_tput          :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`Phy2Phy <Phy2Phy>`
+back2back             :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_tput_mod_vlan :ref:`PacketLossRatioFrameModification <PacketLossRatioFrameModification>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_cont          :ref:`Phy2Phy <Phy2Phy>` blast vswitch at x% TX rate and measure throughput
+pvp_cont              :ref:`PVP <PVP>` blast vswitch at x% TX rate and measure throughput
+pvvp_cont             :ref:`PVVP <PVVP>` blast vswitch at x% TX rate and measure throughput
+phy2phy_scalability   :ref:`Scalability0PacketLoss <Scalability0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
+pvp_tput              :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVP <PVP>`
+pvp_back2back         :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVP <PVP>`
+pvvp_tput             :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVVP <PVVP>`
+pvvp_back2back        :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVVP <PVVP>`
+phy2phy_cpu_load      :ref:`CPU0PacketLoss <CPU0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
+phy2phy_mem_load      Same as :ref:`CPU0PacketLoss <CPU0PacketLoss>` but using a memory intensive app
 ===================== ===========================================================
 
 Supported deployment scenarios:
 
-* Phy2Phy_: Physical port -> vSwitch -> Physical port.
-* PVP_: Physical port -> vSwitch -> VNF -> vSwitch -> Physical port.
-* PVVP_: Physical port -> vSwitch -> VNF -> vSwitch -> VNF -> vSwitch ->
+* :ref:`Phy2Phy <Phy2Phy>`: Physical port -> vSwitch -> Physical port.
+* :ref:`PVP <PVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> Physical port.
+* :ref:`PVVP <PVVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> VNF -> vSwitch ->
   Physical port.
 
 Loopback applications in the Guest can be:
 
 * `DPDK testpmd <http://dpdk.org/doc/guides/testpmd_app_ug/index.html>`_.
 * Linux Bridge.
-* `l2fwd
-  <http://artifacts.opnfv.org/vswitchperf/docs/userguide/testusage.html#l2fwd-kernel-module>`_.
+* :ref:`l2fwd-module`
 
 Supported traffic generators:
 
@@ -44,19 +43,3 @@ Supported traffic generators:
 * Spirent.
 * Dummy.
 
-.. _PacketLossRatio: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-packetlossratio
-
-.. _BackToBackFrames: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-backtobackframes
-
-.. _PacketLossRatioFrameModification: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-throughput-rfc2544-packetlossratioframemodification
-
-.. _Scalability0PacketLoss: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-scalability-flows-rfc2544-0packetloss
-
-.. _CPU0PacketLoss: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltd.html#test-id-ltd-stress-rfc2544-0packetloss
-
-.. _Phy2Phy : http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-physical-port
-
-.. _PVP: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-vnf-vswitch-physical-port
-
-.. _PVVP: http://artifacts.opnfv.org/vswitchperf/docs/requirements/vswitchperf_ltp.html#physical-port-vswitch-vnf-vswitch-vnf-vswitch-physical-port
-
diff --git a/docs/userguide/index.rst b/docs/userguide/index.rst
deleted file mode 100644
index a1cce262..00000000
--- a/docs/userguide/index.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-******************************
-VSPERF User Guide
-******************************
-
-.. toctree::
-   :numbered:
-   :maxdepth: 3
-
-   testusage.rst
-   teststeps.rst
-   integration.rst
-   yardstick.rst
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index 60ed9245..83b29da6 100644
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -2,6 +2,8 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
+.. _integration-tests:
+
 Integration tests
 =================
 
diff --git a/docs/userguide/teststeps.rst b/docs/userguide/teststeps.rst
index 5029f538..4e6c0808 100644
--- a/docs/userguide/teststeps.rst
+++ b/docs/userguide/teststeps.rst
@@ -115,8 +115,8 @@ of supported objects and their most common functions follows:
 
         * ``send_traffic traffic`` - starts a traffic based on the vsperf configuration
           and given ``traffic`` dictionary. More details about ``traffic`` dictionary
-          and its possible values are available at `Traffic Generator Integration Guide
-          <http://artifacts.opnfv.org/vswitchperf/docs/design/trafficgen_integration_guide.html#step-5-supported-traffic-types>`__
+          and its possible values are available at :ref:`Traffic Generator Integration Guide
+          <step-5-supported-traffic-types>`
 
         Examples:
 
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 721fd635..0055164e 100644
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -21,23 +21,19 @@ support in VSPERF includes:
 - Moongen software traffic generator. Requires a separate machine running
   moongen to execute packet generation.
 
-If you want to use another traffic generator, please select the Dummy generator
-option as shown in `Traffic generator instructions
-<http://artifacts.opnfv.org/vswitchperf/docs/configguide/trafficgen.html>`__
+If you want to use another traffic generator, please select the :ref:`trafficgen-dummy`
+generator.
 
 VSPERF Installation
 ^^^^^^^^^^^^^^^^^^^
 
 To see the supported Operating Systems, vSwitches and system requirements,
-please follow the `installation instructions
-<http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html>`__ to
-install.
+please follow the `installation instructions <vsperf-installation>`.
 
 Traffic Generator Setup
 ^^^^^^^^^^^^^^^^^^^^^^^
 
-Follow the `Traffic generator instructions
-<http://artifacts.opnfv.org/vswitchperf/docs/configguide/trafficgen.html>`__ to
+Follow the `Traffic generator instructions <trafficgen-installation>` to
 install and configure a suitable traffic generator.
 
 Cloning and building src dependencies
@@ -86,8 +82,8 @@ contents. Any configuration item mentioned in any .conf file in
 the custom configuration value.
 
 Further details about configuration files evaluation and special behaviour
-of options with ``GUEST_`` prefix could be found at `design document
-<http://artifacts.opnfv.org/vswitchperf/docs/design/vswitchperf_design.html#configuration>`__.
+of options with ``GUEST_`` prefix could be found at :ref:`design document
+<design-configuration>`.
 
 Using a custom settings file
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -111,8 +107,10 @@ described like so (1 = max priority):
 4. Configuration file(s)
 
 Further details about configuration files evaluation and special behaviour
-of options with ``GUEST_`` prefix could be found at `design document
-<http://artifacts.opnfv.org/vswitchperf/docs/design/vswitchperf_design.html#configuration>`__.
+of options with ``GUEST_`` prefix could be found at :ref:`design document
+<design-configuration>`.
+
+.. _overriding-parameters-documentation:
 
 Overriding values defined in configuration files
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -163,27 +161,14 @@ section of test case definition. It is also forbidden to redefine a value of
 vloop_vnf
 ^^^^^^^^^
 
-vsperf uses a VM image called vloop_vnf for looping traffic in the deployment
+VSPERF uses a VM image called vloop_vnf for looping traffic in the deployment
 scenarios involving VMs. The image can be downloaded from
 `<http://artifacts.opnfv.org/>`__.
 
-.. code-block:: console
-
-    $ wget http://artifacts.opnfv.org/vswitchperf/vloop-vnf-ubuntu-14.04_20151216.qcow2
-
-Newer vloop_vnf images are available. Please reference the
-installation instructions for information on these images
-`installation instructions
-<http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html>`__
-
-
-vloop_vnf forwards traffic through a VM using one of:
-
-* DPDK testpmd
-* Linux Bridge
-* l2fwd kernel Module.
+Please see the installation instructions for information on :ref:`vloop-vnf`
+images.
 
-Alternatively you can use your own QEMU image.
+.. _l2fwd-module:
 
 l2fwd Kernel Module
 ^^^^^^^^^^^^^^^^^^^
@@ -748,8 +733,7 @@ of traffic generator can be modified through ``TRAFFIC`` dictionary passed to th
 ``--test-params`` option. It is not needed to specify all values of ``TRAFFIC``
 dictionary. It is sufficient to specify only values, which should be changed.
 Detailed description of ``TRAFFIC`` dictionary can be found at
-`Configuration of TRAFFIC dictionary
-<http://artifacts.opnfv.org/vswitchperf/docs/index.html#configuration-of-traffic-dictionary>`__
+:ref:`configuration-of-traffic-dictionary`.
 
 Example of execution of VSPERF in "trafficgen" mode:
 
@@ -821,6 +805,5 @@ used to configure vswitchd via ovs-vsctl calls.
 More information
 ^^^^^^^^^^^^^^^^
 
-For more information and details refer to the vSwitchPerf user guide at:
-http://artifacts.opnfv.org/vswitchperf/docs/userguide/index.html
+For more information and details refer to the rest of vSwitchPerfuser documentation.
 
diff --git a/docs/userguide/yardstick.rst b/docs/userguide/yardstick.rst
index c906df8e..b5e5c72d 100644
--- a/docs/userguide/yardstick.rst
+++ b/docs/userguide/yardstick.rst
@@ -65,14 +65,10 @@ Preparation of custom VM image
 
 In general, any Linux distribution supported by vswitchperf can be used as
 a base image for vswitchperf. One of the possibilities is to modify vloop-vnf
-image, which can be downloaded from `<http://artifacts.opnfv.org/vswitchperf.html/>`__.
+image, which can be downloaded from `<http://artifacts.opnfv.org/vswitchperf.html/>`__
+(see :ref:`vloop-vnf`).
 
-.. code-block:: console
-
-    $ wget http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160823.qcow2
-
-Please follow the `installation instructions
-<http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html>`__ to
+Please follow the :ref:`vsperf-installation` to
 install vswitchperf inside vloop-vnf image. As vswitchperf will be run in
 trafficgen mode, it is possible to skip installation and compilation of OVS,
 QEMU and DPDK to keep image size smaller.