pkt_gen: Adding Support of testcenter traffic generation using STC REST API.

Stcrestclient package based script is added. Support for RFC22544
backtoback, latency, frameloss are also added, along with the throughput.

Comments Addressed:
1.  Parameter name consistency. Ex: use duration (refer dummy.py).
2.  Moved 'only the necessary contents of README to
    configguide/trafficgen.rst.
3.  Removed README file
4.  Commit message format (pkt_gen: and linewrap)
5.  Merged 4 scripts (throughput/backtoback/latency/frameloss)
    that were rest-based into one single script.
    Name: testcenter-rfc2544-test.py
6.  Changed year to 2016
7.  Moved imports to the top (testcenter-rfc2544-rest.py)
8.  Changed prints to Log (testcenter-rfc2544-rest.py)
9.  Reporting the frame loss percentage.
10. Calls to frameloss and latency are not added as the 'caller'
    class TrafficControllerRFC2544 is only calling backtoback and
    throughput.
11. Changed Exception, e to Exception as e for python 3
    compatibility
12. Remaining prints to debug and logger.error for errors.
13. Moved Session creation under try block.
14. Removed deadcode
15. Fixed missing docstring
16. Generic to specific Exception.
17. if-if to if-elif
18. Debug level logging only under verbose flag.
19. Fixed Arguments mismatch.
20. Ordering of the imports
Note: The testcenter-rfc2544-rest.py is spawned as a separate process,
and need not be wrapped in a class.

JIRA: VSPERF-237

Change-Id: I05d2b24fca1da4ba67bc4d79206c5d755ebf8f20
Signed-off-by: sridharkn <sridhar.rao@spirent.com>

3 files changed, 729 insertions, 28 deletions

diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index 6e7626d8..e47fcffe 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -222,3 +222,19 @@ best practice results in deploying STCv, the following is suggested:
 
 To get the highest performance and accuracy, Spirent TestCenter hardware is
 recommended. vsperf can run with either stype test ports.
+
+Using STC REST Client
+~~~~~~~~~~~~~~~~~~~~~
+The stcrestclient package provides the stchttp.py ReST API wrapper module.
+This allows simple function calls, nearly identical to those provided by
+StcPython.py, to be used to access TestCenter server sessions via the
+STC ReST API. Basic ReST functionality is provided by the resthttp module,
+and may be used for writing ReST clients independent of STC.
+
+- Project page: <https://github.com/Spirent/py-stcrestclient>
+- Package download: <http://pypi.python.org/pypi/stcrestclient>
+
+To use REST interface, follow the instructions in the Project page to
+install the package. Once installed, the scripts named with 'rest' keyword
+can be used. For example: testcenter-rfc2544-rest.py can be used to run
+RFC 2544 tests using the REST interface.
diff --git a/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py b/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py
new file mode 100644
index 00000000..13f68fb7
--- /dev/null
+++ b/tools/pkt_gen/testcenter/testcenter-rfc2544-rest.py
@@ -0,0 +1,558 @@
+# Copyright 2016 Spirent Communications.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+'''
+@author Spirent Communications
+
+This test automates the RFC2544 tests using the Spirent
+TestCenter REST APIs. This test supports Python 3.4
+
+'''
+import argparse
+import logging
+import os
+
+# Load Spirent REST Library
+from stcrestclient import stchttp
+
+logger = logging.getLogger(__name__)
+
+
+def create_dir(path):
+    """Create the directory as specified in path """
+    if not os.path.exists(path):
+        try:
+            os.makedirs(path)
+        except OSError as e:
+            logger.error("Failed to create directory %s: %s", path, str(e))
+            raise
+
+
+def write_query_results_to_csv(results_path, csv_results_file_prefix,
+                               query_results):
+    """ Write the results of the query to the CSV """
+    create_dir(results_path)
+    filec = os.path.join(results_path, csv_results_file_prefix + ".csv")
+    with open(filec, "wb") as f:
+        f.write(query_results["Columns"].replace(" ", ",") + "\n")
+        for row in (query_results["Output"].replace("} {", ",").
+                    replace("{", "").replace("}", "").split(",")):
+            f.write(row.replace(" ", ",") + "\n")
+
+
+def positive_int(value):
+    """ Positive Integer type for Arguments """
+    ivalue = int(value)
+    if ivalue <= 0:
+        raise argparse.ArgumentTypeError(
+            "%s is an invalid positive int value" % value)
+    return ivalue
+
+
+def percent_float(value):
+    """ Floating type for Arguments """
+    pvalue = float(value)
+    if pvalue < 0.0 or pvalue > 100.0:
+        raise argparse.ArgumentTypeError(
+            "%s not in range [0.0, 100.0]" % pvalue)
+    return pvalue
+
+
+def main():
+    """ Read the arguments, Invoke Test and Return the results"""
+    parser = argparse.ArgumentParser()
+    # Required parameters
+    required_named = parser.add_argument_group("required named arguments")
+    required_named.add_argument("--lab_server_addr",
+                                required=True,
+                                help=("The IP address of the"
+                                      "Spirent Lab Server"),
+                                dest="lab_server_addr")
+    required_named.add_argument("--license_server_addr",
+                                required=True,
+                                help=("The IP address of the Spirent"
+                                      "License Server"),
+                                dest="license_server_addr")
+    required_named.add_argument("--east_chassis_addr",
+                                required=True,
+                                help=("The TestCenter chassis IP address to"
+                                      "use for the east test port"),
+                                dest="east_chassis_addr")
+    required_named.add_argument("--east_slot_num",
+                                type=positive_int,
+                                required=True,
+                                help=("The TestCenter slot number to"
+                                      "use for the east test port"),
+                                dest="east_slot_num")
+    required_named.add_argument("--east_port_num",
+                                type=positive_int,
+                                required=True,
+                                help=("The TestCenter port number to use"
+                                      "for the east test port"),
+                                dest="east_port_num")
+    required_named.add_argument("--west_chassis_addr",
+                                required=True,
+                                help=("The TestCenter chassis IP address"
+                                      "to use for the west test port"),
+                                dest="west_chassis_addr")
+    required_named.add_argument("--west_slot_num",
+                                type=positive_int,
+                                required=True,
+                                help=("The TestCenter slot number to use"
+                                      "for the west test port"),
+                                dest="west_slot_num")
+    required_named.add_argument("--west_port_num",
+                                type=positive_int,
+                                required=True,
+                                help=("The TestCenter port number to"
+                                      "use for the west test port"),
+                                dest="west_port_num")
+    # Optional parameters
+    optional_named = parser.add_argument_group("optional named arguments")
+    optional_named.add_argument("--metric",
+                                required=False,
+                                help=("One among - throughput, latency,\
+                                      backtoback and frameloss"),
+                                choices=["throughput", "latency",
+                                         "backtoback", "frameloss"],
+                                default="throughput",
+                                dest="metric")
+    optional_named.add_argument("--test_session_name",
+                                required=False,
+                                default="RFC2544 East-West Throughput",
+                                help=("The friendly name to identify"
+                                      "the Spirent Lab Server test session"),
+                                dest="test_session_name")
+
+    optional_named.add_argument("--test_user_name",
+                                required=False,
+                                default="RFC2544 East-West User",
+                                help=("The friendly name to identify the"
+                                      "Spirent Lab Server test user"),
+                                dest="test_user_name")
+    optional_named.add_argument("--results_dir",
+                                required=False,
+                                default="./Results",
+                                help="The directory to copy results to",
+                                dest="results_dir")
+    optional_named.add_argument("--csv_results_file_prefix",
+                                required=False,
+                                default="Rfc2544Tput",
+                                help="The prefix for the CSV results files",
+                                dest="csv_results_file_prefix")
+    optional_named.add_argument("--num_trials",
+                                type=positive_int,
+                                required=False,
+                                default=1,
+                                help=("The number of trials to execute during"
+                                      "the test"),
+                                dest="num_trials")
+    optional_named.add_argument("--trial_duration_sec",
+                                type=positive_int,
+                                required=False,
+                                default=60,
+                                help=("The duration of each trial executed"
+                                      "during the test"),
+                                dest="trial_duration_sec")
+    optional_named.add_argument("--traffic_pattern",
+                                required=False,
+                                choices=["BACKBONE", "MESH", "PAIR"],
+                                default="PAIR",
+                                help="The traffic pattern between endpoints",
+                                dest="traffic_pattern")
+    optional_named.add_argument("--search_mode",
+                                required=False,
+                                choices=["COMBO", "STEP", "BINARY"],
+                                default="BINARY",
+                                help=("The search mode used to find the"
+                                      "throughput rate"),
+                                dest="search_mode")
+    optional_named.add_argument("--learning_mode",
+                                required=False,
+                                choices=["AUTO", "L2_LEARNING",
+                                         "L3_LEARNING", "NONE"],
+                                default="AUTO",
+                                help=("The learning mode used during the test,"
+                                      "default is 'NONE'"),
+                                dest="learning_mode")
+    optional_named.add_argument("--rate_lower_limit_pct",
+                                type=percent_float,
+                                required=False,
+                                default=1.0,
+                                help=("The minimum percent line rate that"
+                                      "will be used during the test"),
+                                dest="rate_lower_limit_pct")
+    optional_named.add_argument("--rate_upper_limit_pct",
+                                type=percent_float,
+                                required=False,
+                                default=99.0,
+                                help=("The maximum percent line rate that"
+                                      "will be used during the test"),
+                                dest="rate_upper_limit_pct")
+    optional_named.add_argument("--rate_initial_pct",
+                                type=percent_float,
+                                required=False,
+                                default=99.0,
+                                help=("If Search Mode is BINARY, the percent"
+                                      "line rate that will be used at the"
+                                      "start of the test"),
+                                dest="rate_initial_pct")
+    optional_named.add_argument("--rate_step_pct",
+                                type=percent_float,
+                                required=False,
+                                default=10.0,
+                                help=("If SearchMode is STEP, the percent"
+                                      "load increase per step"),
+                                dest="rate_step_pct")
+    optional_named.add_argument("--resolution_pct",
+                                type=percent_float,
+                                required=False,
+                                default=1.0,
+                                help=("The minimum percentage of load"
+                                      "adjustment between iterations"),
+                                dest="resolution_pct")
+    optional_named.add_argument("--frame_size_list",
+                                type=lambda s: [int(item)
+                                                for item in s.split(',')],
+                                required=False,
+                                default=[256],
+                                help="A comma-delimited list of frame sizes",
+                                dest="frame_size_list")
+    optional_named.add_argument("--acceptable_frame_loss_pct",
+                                type=percent_float,
+                                required=False,
+                                default=0.0,
+                                help=("The maximum acceptable frame loss"
+                                      "percent in any iteration"),
+                                dest="acceptable_frame_loss_pct")
+    optional_named.add_argument("--east_intf_addr",
+                                required=False,
+                                default="192.85.1.3",
+                                help=("The address to assign to the first"
+                                      "emulated device interface on the first"
+                                      "east port"),
+                                dest="east_intf_addr")
+    optional_named.add_argument("--east_intf_gateway_addr",
+                                required=False,
+                                default="192.85.1.53",
+                                help=("The gateway address to assign to the"
+                                      "first emulated device interface on the"
+                                      "first east port"),
+                                dest="east_intf_gateway_addr")
+    optional_named.add_argument("--west_intf_addr",
+                                required=False,
+                                default="192.85.1.53",
+                                help=("The address to assign to the first"
+                                      "emulated device interface on the"
+                                      "first west port"),
+                                dest="west_intf_addr")
+    optional_named.add_argument("--west_intf_gateway_addr",
+                                required=False,
+                                default="192.85.1.53",
+                                help=("The gateway address to assign to"
+                                      "the first emulated device interface"
+                                      "on the first west port"),
+                                dest="west_intf_gateway_addr")
+    parser.add_argument("-v",
+                        "--verbose",
+                        required=False,
+                        default=True,
+                        help="More output during operation when present",
+                        action="store_true",
+                        dest="verbose")
+    args = parser.parse_args()
+
+    if args.verbose:
+        logger.debug("Creating results directory")
+    create_dir(args.results_dir)
+
+    session_name = args.test_session_name
+    user_name = args.test_user_name
+
+    try:
+        stc = stchttp.StcHttp(args.lab_server_addr)
+        session_id = stc.new_session(user_name, session_name)
+        stc.join_session(session_id)
+    except RuntimeError as e:
+        logger.error(e)
+        raise
+
+    # Get STC system info.
+    tx_port_loc = "//%s/%s/%s" % (args.east_chassis_addr,
+                                  args.east_slot_num,
+                                  args.east_port_num)
+    rx_port_loc = "//%s/%s/%s" % (args.west_chassis_addr,
+                                  args.west_slot_num,
+                                  args.west_port_num)
+
+    # Retrieve and display the server information
+    if args.verbose:
+        logger.debug("SpirentTestCenter system version: %s",
+                     stc.get("system1", "version"))
+
+    try:
+        device_list = []
+        port_list = []
+        if args.verbose:
+            logger.debug("Bring up license server")
+        license_mgr = stc.get("system1", "children-licenseservermanager")
+        if args.verbose:
+            logger.debug("license_mgr = %s", license_mgr)
+        stc.create("LicenseServer", under=license_mgr, attributes={
+                   "server": args.license_server_addr})
+
+        # Create the root project object
+        if args.verbose:
+            logger.debug("Creating project ...")
+        project = stc.get("System1", "children-Project")
+
+        # Create ports
+        if args.verbose:
+            logger.debug("Creating ports ...")
+        east_chassis_port = stc.create('port', project)
+        if args.verbose:
+            logger.debug("Configuring TX port ...")
+        stc.config(east_chassis_port, {'location': tx_port_loc})
+        port_list.append(east_chassis_port)
+
+        west_chassis_port = stc.create('port', project)
+        if args.verbose:
+            logger.debug("Configuring RX port ...")
+        stc.config(west_chassis_port, {'location': rx_port_loc})
+        port_list.append(west_chassis_port)
+
+        # Create emulated genparam for east port
+        east_device_gen_params = stc.create("EmulatedDeviceGenParams",
+                                            under=project,
+                                            attributes={"Port":
+                                                        east_chassis_port})
+        # Create the DeviceGenEthIIIfParams object
+        stc.create("DeviceGenEthIIIfParams",
+                   under=east_device_gen_params)
+        # Configuring Ipv4 interfaces
+        stc.create("DeviceGenIpv4IfParams",
+                   under=east_device_gen_params,
+                   attributes={"Addr": args.east_intf_addr,
+                               "Gateway": args.east_intf_gateway_addr})
+        # Create Devices using the Device Wizard
+        device_gen_config = stc.perform("DeviceGenConfigExpand",
+                                        params={"DeleteExisting": "No",
+                                                "GenParams":
+                                                east_device_gen_params})
+        # Append to the device list
+        device_list.append(device_gen_config['ReturnList'])
+
+        # Create emulated genparam for west port
+        west_device_gen_params = stc.create("EmulatedDeviceGenParams",
+                                            under=project,
+                                            attributes={"Port":
+                                                        west_chassis_port})
+        # Create the DeviceGenEthIIIfParams object
+        stc.create("DeviceGenEthIIIfParams",
+                   under=west_device_gen_params)
+        # Configuring Ipv4 interfaces
+        stc.create("DeviceGenIpv4IfParams",
+                   under=west_device_gen_params,
+                   attributes={"Addr": args.west_intf_addr,
+                               "Gateway": args.west_intf_gateway_addr})
+        # Create Devices using the Device Wizard
+        device_gen_config = stc.perform("DeviceGenConfigExpand",
+                                        params={"DeleteExisting": "No",
+                                                "GenParams":
+                                                west_device_gen_params})
+        # Append to the device list
+        device_list.append(device_gen_config['ReturnList'])
+        if args.verbose:
+            logger.debug(device_list)
+
+        # Create the RFC 2544 'metric test
+        if args.metric == "throughput":
+            if args.verbose:
+                logger.debug("Set up the RFC2544 throughput test...")
+            stc.perform("Rfc2544SetupThroughputTestCommand",
+                        params={"AcceptableFrameLoss":
+                                args.acceptable_frame_loss_pct,
+                                "Duration": args.trial_duration_sec,
+                                "FrameSizeList": args.frame_size_list,
+                                "LearningMode": args.learning_mode,
+                                "NumOfTrials": args.num_trials,
+                                "RateInitial": args.rate_initial_pct,
+                                "RateLowerLimit": args.rate_lower_limit_pct,
+                                "RateStep": args.rate_step_pct,
+                                "RateUpperLimit": args.rate_upper_limit_pct,
+                                "Resolution": args.resolution_pct,
+                                "SearchMode": args.search_mode,
+                                "TrafficPattern": args.traffic_pattern})
+        elif args.metric == "backtoback":
+            stc.perform("Rfc2544SetupBackToBackTestCommand",
+                        params={"AcceptableFrameLoss":
+                                args.acceptable_frame_loss_pct,
+                                "Duration": args.trial_duration_sec,
+                                "FrameSizeList": args.frame_size_list,
+                                "LearningMode": args.learning_mode,
+                                "LatencyType": args.latency_type,
+                                "NumOfTrials": args.num_trials,
+                                "RateInitial": args.rate_initial_pct,
+                                "RateLowerLimit": args.rate_lower_limit_pct,
+                                "RateStep": args.rate_step_pct,
+                                "RateUpperLimit": args.rate_upper_limit_pct,
+                                "Resolution": args.resolution_pct,
+                                "SearchMode": args.search_mode,
+                                "TrafficPattern": args.traffic_pattern})
+        elif args.metric == "frameloss":
+            stc.perform("Rfc2544SetupFrameLossTestCommand",
+                        params={"AcceptableFrameLoss":
+                                args.acceptable_frame_loss_pct,
+                                "Duration": args.trial_duration_sec,
+                                "FrameSizeList": args.frame_size_list,
+                                "LearningMode": args.learning_mode,
+                                "LatencyType": args.latency_type,
+                                "NumOfTrials": args.num_trials,
+                                "RateInitial": args.rate_initial_pct,
+                                "RateLowerLimit": args.rate_lower_limit_pct,
+                                "RateStep": args.rate_step_pct,
+                                "RateUpperLimit": args.rate_upper_limit_pct,
+                                "Resolution": args.resolution_pct,
+                                "SearchMode": args.search_mode,
+                                "TrafficPattern": args.traffic_pattern})
+        elif args.metric == "latency":
+            stc.perform("Rfc2544SetupLatencyTestCommand",
+                        params={"AcceptableFrameLoss":
+                                args.acceptable_frame_loss_pct,
+                                "Duration": args.trial_duration_sec,
+                                "FrameSizeList": args.frame_size_list,
+                                "LearningMode": args.learning_mode,
+                                "LatencyType": args.latency_type,
+                                "NumOfTrials": args.num_trials,
+                                "RateInitial": args.rate_initial_pct,
+                                "RateLowerLimit": args.rate_lower_limit_pct,
+                                "RateStep": args.rate_step_pct,
+                                "RateUpperLimit": args.rate_upper_limit_pct,
+                                "Resolution": args.resolution_pct,
+                                "SearchMode": args.search_mode,
+                                "TrafficPattern": args.traffic_pattern})
+
+        # Save the configuration
+        stc.perform("SaveToTcc", params={"Filename": "2544.tcc"})
+        # Connect to the hardware...
+        stc.perform("AttachPorts", params={"portList": stc.get(
+            "system1.project", "children-port"), "autoConnect": "TRUE"})
+        # Apply configuration.
+        if args.verbose:
+            logger.debug("Apply configuration...")
+        stc.apply()
+
+        if args.verbose:
+            logger.debug("Starting the sequencer...")
+        stc.perform("SequencerStart")
+
+        # Wait for sequencer to finish
+        logger.info(
+            "Starting test... Please wait for the test to complete...")
+        stc.wait_until_complete()
+        logger.info("The test has completed... Saving results...")
+
+        # Determine what the results database filename is...
+        lab_server_resultsdb = stc.get(
+            "system1.project.TestResultSetting", "CurrentResultFileName")
+
+        if args.verbose:
+            logger.debug("The lab server results database is %s",
+                         lab_server_resultsdb)
+
+        stc.perform("CSSynchronizeFiles",
+                    params={"DefaultDownloadDir": args.results_dir})
+
+        resultsdb = args.results_dir + \
+            lab_server_resultsdb.split("/Results")[1]
+
+        logger.info(
+            "The local summary DB file has been saved to %s", resultsdb)
+
+        # The returns the "RFC2544ThroughputTestResultDetailedSummaryView"
+        # table view from the results database.
+        # There are other views available.
+
+        if args.metric == "throughput":
+            resultsdict = (
+                stc.perform("QueryResult",
+                            params={
+                                "DatabaseConnectionString":
+                                resultsdb,
+                                "ResultPath":
+                                ("RFC2544ThroughputTestResultDetailed"
+                                 "SummaryView")}))
+
+        # The returns the "RFC2544BacktoBackTestResultDetailedSummaryView"
+        # table view from the results database.
+        # There are other views available.
+        elif args.metric == "backtoback":
+            resultsdict = (
+                stc.perform("QueryResult",
+                            params={
+                                "DatabaseConnectionString":
+                                resultsdb,
+                                "ResultPath":
+                                ("RFC2544Back2BackTestResultDetailed"
+                                 "SummaryView")}))
+
+        # The returns the "RFC2544LatencyTestResultDetailedSummaryView"
+        # table view from the results database.
+        # There are other views available.
+        elif args.metric == "latency":
+            resultsdict = (
+                stc.perform("QueryResult",
+                            params={
+                                "DatabaseConnectionString":
+                                resultsdb,
+                                "ResultPath":
+                                ("RFC2544LatencyTestResultDetailed"
+                                 "SummaryView")}))
+
+        # The returns the "RFC2544FrameLossTestResultDetailedSummaryView"
+        # table view from the results database.
+        # There are other views available.
+        elif args.metric == "frameloss":
+            resultsdict = (
+                stc.perform("QueryResult",
+                            params={
+                                "DatabaseConnectionString":
+                                resultsdb,
+                                "ResultPath":
+                                ("RFC2544FrameLossTestResultDetailed"
+                                 "SummaryView")}))
+        if args.verbose:
+            logger.debug("resultsdict[\"Columns\"]: %s",
+                         resultsdict["Columns"])
+            logger.debug("resultsdict[\"Output\"]: %s", resultsdict["Output"])
+            logger.debug("Result paths: %s",
+                         stc.perform("GetTestResultSettingPaths"))
+
+            # Write results to csv
+            logger.debug("Writing CSV file to results directory %s",
+                         args.results_dir)
+        write_query_results_to_csv(
+            args.results_dir, args.csv_results_file_prefix, resultsdict)
+
+    except RuntimeError as e:
+        logger.error(e)
+
+    if args.verbose:
+        logger.debug("Destroy session on lab server")
+    stc.end_session()
+
+    logger.info("Test complete!")
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/pkt_gen/testcenter/testcenter.py b/tools/pkt_gen/testcenter/testcenter.py
index f670612c..b1351155 100644
--- a/tools/pkt_gen/testcenter/testcenter.py
+++ b/tools/pkt_gen/testcenter/testcenter.py
@@ -1,4 +1,4 @@
-# Copyright 2015 Spirent Communications.
+# Copyright 2016 Spirent Communications.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -19,20 +19,22 @@ Provides a model for Spirent TestCenter as a test tool for implementing
 various performance tests of a virtual switch.
 """
 
-from __future__ import print_function
-
-from tools.pkt_gen import trafficgen
-from core.results.results_constants import ResultsConstants
-import subprocess
-import os
 import csv
+import logging
+import os
+import subprocess
+
 from conf import settings
+from core.results.results_constants import ResultsConstants
+from tools.pkt_gen import trafficgen
 
 
 class TestCenter(trafficgen.ITrafficGenerator):
     """
     Spirent TestCenter
     """
+    _logger = logging.getLogger(__name__)
+
     def connect(self):
         """
         Do nothing.
@@ -45,29 +47,33 @@ class TestCenter(trafficgen.ITrafficGenerator):
         """
         pass
 
-    def send_burst_traffic(self, traffic=None, numpkts=100, duration=20, framerate=100):
+    def send_burst_traffic(self, traffic=None, numpkts=100, duration=20):
         """
         Do nothing.
         """
         return None
 
-    def send_cont_traffic(self, traffic=None, duration=30, framerate=0,
-                          multistream=False):
+    def send_cont_traffic(self, traffic=None, duration=30):
         """
         Do nothing.
         """
         return None
 
     def send_rfc2544_throughput(self, traffic=None, trials=3, duration=20,
-                                lossrate=0.0, multistream=False):
+                                lossrate=0.0):
         """
         Send traffic per RFC2544 throughput test specifications.
         """
         verbose = False
-
+        framesize = settings.getValue("TRAFFICGEN_STC_FRAME_SIZE")
+        if traffic and 'l2' in traffic:
+            if 'framesize' in traffic['l2']:
+                framesize = traffic['l2']['framesize']
         args = [settings.getValue("TRAFFICGEN_STC_PYTHON2_PATH"),
-                os.path.join(settings.getValue("TRAFFICGEN_STC_TESTCENTER_PATH"),
-                             settings.getValue("TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME")),
+                os.path.join(
+                    settings.getValue("TRAFFICGEN_STC_TESTCENTER_PATH"),
+                    settings.getValue(
+                        "TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME")),
                 "--lab_server_addr",
                 settings.getValue("TRAFFICGEN_STC_LAB_SERVER_ADDR"),
                 "--license_server_addr",
@@ -111,7 +117,7 @@ class TestCenter(trafficgen.ITrafficGenerator):
                 "--resolution_pct",
                 settings.getValue("TRAFFICGEN_STC_RESOLUTION_PCT"),
                 "--frame_size_list",
-                settings.getValue("TRAFFICGEN_STC_FRAME_SIZE"),
+                str(framesize),
                 "--acceptable_frame_loss_pct",
                 settings.getValue("TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT"),
                 "--east_intf_addr",
@@ -122,33 +128,154 @@ class TestCenter(trafficgen.ITrafficGenerator):
                 settings.getValue("TRAFFICGEN_STC_WEST_INTF_ADDR"),
                 "--west_intf_gateway_addr",
                 settings.getValue("TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR")]
+
         if settings.getValue("TRAFFICGEN_STC_VERBOSE") is "True":
             args.append("--verbose")
             verbose = True
-            print("Arguments used to call test: %s" % args)
+            self._logger.debug("Arguments used to call test: %s", args)
+        subprocess.check_call(args)
+
+        filec = os.path.join(settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
+                             settings.getValue(
+                                 "TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX") +
+                             ".csv")
+
+        if verbose:
+            self._logger.info("file: %s", filec)
+
+        result = {}
+
+        with open(filec, "r") as csvfile:
+            csvreader = csv.DictReader(csvfile)
+            for row in csvreader:
+                self._logger.info("Row: %s", row)
+                result[ResultsConstants.TX_RATE_FPS] = 0.0
+                result[ResultsConstants.THROUGHPUT_RX_FPS] = 0.0
+                result[ResultsConstants.TX_RATE_MBPS] = 0.0
+                result[ResultsConstants.THROUGHPUT_RX_MBPS] = 0.0
+                result[ResultsConstants.TX_RATE_PERCENT] = float(
+                    row["OfferedLoad(%)"])
+                result[ResultsConstants.THROUGHPUT_RX_PERCENT] = float(
+                    row["Throughput(%)"])
+                result[ResultsConstants.MIN_LATENCY_NS] = float(
+                    row["MinimumLatency(us)"]) * 1000
+                result[ResultsConstants.MAX_LATENCY_NS] = float(
+                    row["MaximumLatency(us)"]) * 1000
+                result[ResultsConstants.AVG_LATENCY_NS] = float(
+                    row["AverageLatency(us)"]) * 1000
+                result[ResultsConstants.FRAME_LOSS_PERCENT] = float(
+                    row["PercentLoss"])
+        return result
+
+    def send_rfc2544_back2back(self, traffic=None, trials=1, duration=20,
+                               lossrate=0.0):
+        """
+        Send traffic per RFC2544 BacktoBack test specifications.
+        """
+        verbose = False
+        framesize = settings.getValue("TRAFFICGEN_STC_FRAME_SIZE")
+        if traffic and 'l2' in traffic:
+            if 'framesize' in traffic['l2']:
+                framesize = traffic['l2']['framesize']
+        args = [settings.getValue("TRAFFICGEN_STC_PYTHON2_PATH"),
+                os.path.join(
+                    settings.getValue("TRAFFICGEN_STC_TESTCENTER_PATH"),
+                    settings.getValue(
+                        "TRAFFICGEN_STC_RFC2544_B2B_TEST_FILE_NAME")),
+                "--metric",
+                settings.getValue("TRAFFICGEN_STC_RFC2544_METRIC"),
+                "--lab_server_addr",
+                settings.getValue("TRAFFICGEN_STC_LAB_SERVER_ADDR"),
+                "--license_server_addr",
+                settings.getValue("TRAFFICGEN_STC_LICENSE_SERVER_ADDR"),
+                "--east_chassis_addr",
+                settings.getValue("TRAFFICGEN_STC_EAST_CHASSIS_ADDR"),
+                "--east_slot_num",
+                settings.getValue("TRAFFICGEN_STC_EAST_SLOT_NUM"),
+                "--east_port_num",
+                settings.getValue("TRAFFICGEN_STC_EAST_PORT_NUM"),
+                "--west_chassis_addr",
+                settings.getValue("TRAFFICGEN_STC_WEST_CHASSIS_ADDR"),
+                "--west_slot_num",
+                settings.getValue("TRAFFICGEN_STC_WEST_SLOT_NUM"),
+                "--west_port_num",
+                settings.getValue("TRAFFICGEN_STC_WEST_PORT_NUM"),
+                "--test_session_name",
+                settings.getValue("TRAFFICGEN_STC_TEST_SESSION_NAME"),
+                "--results_dir",
+                settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
+                "--csv_results_file_prefix",
+                settings.getValue("TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX"),
+                "--num_trials",
+                settings.getValue("TRAFFICGEN_STC_NUMBER_OF_TRIALS"),
+                "--trial_duration_sec",
+                settings.getValue("TRAFFICGEN_STC_TRIAL_DURATION_SEC"),
+                "--traffic_pattern",
+                settings.getValue("TRAFFICGEN_STC_TRAFFIC_PATTERN"),
+                "--search_mode",
+                settings.getValue("TRAFFICGEN_STC_SEARCH_MODE"),
+                "--learning_mode",
+                settings.getValue("TRAFFICGEN_STC_LEARNING_MODE"),
+                "--latency_type",
+                settings.getValue("TRAFFICGEN_STC_LATENCY_TYPE"),
+                "--rate_lower_limit_pct",
+                settings.getValue("TRAFFICGEN_STC_RATE_LOWER_LIMIT_PCT"),
+                "--rate_upper_limit_pct",
+                settings.getValue("TRAFFICGEN_STC_RATE_UPPER_LIMIT_PCT"),
+                "--rate_initial_pct",
+                settings.getValue("TRAFFICGEN_STC_RATE_INITIAL_PCT"),
+                "--rate_step_pct",
+                settings.getValue("TRAFFICGEN_STC_RATE_STEP_PCT"),
+                "--resolution_pct",
+                settings.getValue("TRAFFICGEN_STC_RESOLUTION_PCT"),
+                "--frame_size_list",
+                str(framesize),
+                "--acceptable_frame_loss_pct",
+                settings.getValue("TRAFFICGEN_STC_ACCEPTABLE_FRAME_LOSS_PCT"),
+                "--east_intf_addr",
+                settings.getValue("TRAFFICGEN_STC_EAST_INTF_ADDR"),
+                "--east_intf_gateway_addr",
+                settings.getValue("TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR"),
+                "--west_intf_addr",
+                settings.getValue("TRAFFICGEN_STC_WEST_INTF_ADDR"),
+                "--west_intf_gateway_addr",
+                settings.getValue("TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR")]
 
-        subprocess.check_call(map(os.path.expanduser, args))
+        if settings.getValue("TRAFFICGEN_STC_VERBOSE") is "True":
+            args.append("--verbose")
+            verbose = True
+            self._logger.info("Arguments used to call test: %s", args)
+        subprocess.check_call(args)
 
-        file = os.path.join(settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
-                            settings.getValue("TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX") + ".csv")
+        filecs = os.path.join(settings.getValue("TRAFFICGEN_STC_RESULTS_DIR"),
+                              settings.getValue(
+                                  "TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX") +
+                              ".csv")
         if verbose:
-            print("file: %s" % file)
+            self._logger.debug("file: %s", filecs)
 
         result = {}
 
-        with open(file, "r") as csvfile:
+        with open(filecs, "r") as csvfile:
             csvreader = csv.DictReader(csvfile)
             for row in csvreader:
-                print("Row: %s" % row)
+                self._logger.info("Row: %s", row)
                 result[ResultsConstants.TX_RATE_FPS] = 0.0
                 result[ResultsConstants.THROUGHPUT_RX_FPS] = 0.0
                 result[ResultsConstants.TX_RATE_MBPS] = 0.0
                 result[ResultsConstants.THROUGHPUT_RX_MBPS] = 0.0
-                result[ResultsConstants.TX_RATE_PERCENT] = float(row["OfferedLoad(%)"])
-                result[ResultsConstants.THROUGHPUT_RX_PERCENT] = float(row["Throughput(%)"])
-                result[ResultsConstants.MIN_LATENCY_NS] = float(row["MinimumLatency(us)"]) * 1000
-                result[ResultsConstants.MAX_LATENCY_NS] = float(row["MaximumLatency(us)"]) * 1000
-                result[ResultsConstants.AVG_LATENCY_NS] = float(row["AverageLatency(us)"]) * 1000
+                result[ResultsConstants.TX_RATE_PERCENT] = float(
+                    row["OfferedLoad(%)"])
+                result[ResultsConstants.THROUGHPUT_RX_PERCENT] = float(
+                    row["Throughput(%)"])
+                result[ResultsConstants.MIN_LATENCY_NS] = float(
+                    row["MinimumLatency(us)"]) * 1000
+                result[ResultsConstants.MAX_LATENCY_NS] = float(
+                    row["MaximumLatency(us)"]) * 1000
+                result[ResultsConstants.AVG_LATENCY_NS] = float(
+                    row["AverageLatency(us)"]) * 1000
+                result[ResultsConstants.FRAME_LOSS_PERCENT] = float(
+                    row["PercentLoss"])
         return result
 
 if __name__ == '__main__':
@@ -159,6 +286,6 @@ if __name__ == '__main__':
             'dstip': '90.90.90.90',
         },
     }
-
     with TestCenter() as dev:
         print(dev.send_rfc2544_throughput(traffic=TRAFFIC))
+        print(dev.send_rfc2544_backtoback(traffic=TRAFFIC))