diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/vHello_VES.sh | 5 | ||||
| -rw-r--r-- | tests/vHello_VES_3Node.sh | 430 |
2 files changed, 3 insertions, 432 deletions
diff --git a/tests/vHello_VES.sh b/tests/vHello_VES.sh index bbddfa5..91d615a 100644 --- a/tests/vHello_VES.sh +++ b/tests/vHello_VES.sh @@ -124,7 +124,8 @@ setup () { chmod 755 /opt/tacker/*.sh echo "$0: $(date) tacker-setup part 1" - bash utils/tacker-setup.sh init + wget https://git.opnfv.org/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker-setup.sh + bash /tmp/tacker-setup.sh init if [ $? -eq 1 ]; then fail; fi echo "$0: $(date) tacker-setup part 2" @@ -166,8 +167,8 @@ copy_blueprint() { fi echo "$0: $(date) copy tosca-vnfd-hello-ves to blueprints folder" + if [[ ! -d /opt/tacker/blueprints ]]; then mkdir /opt/tacker/blueprints; fi cp -r blueprints/tosca-vnfd-hello-ves /opt/tacker/blueprints/tosca-vnfd-hello-ves - cp $0 /opt/tacker/. } start() { diff --git a/tests/vHello_VES_3Node.sh b/tests/vHello_VES_3Node.sh deleted file mode 100644 index cc85ebc..0000000 --- a/tests/vHello_VES_3Node.sh +++ /dev/null @@ -1,430 +0,0 @@ -#!/bin/bash -# Copyright 2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# What this is: Deployment test for the VES agent and collector based -# upon the Tacker Hello World blueprint -# -# Status: this is a work in progress, under test. -# -# How to use: -# $ git clone https://gerrit.opnfv.org/gerrit/ves -# $ cd ves/tests -# $ bash vHello_VES.sh [setup|start|run|test|stop|clean] [VDU1|VDU2|VDU3] -# [monitor|traffic|pause|nic] -# setup: setup test environment -# start: install blueprint and run test -# run: setup test environment and run test -# test: run test tools/scenario - see below -# stop: stop test and uninstall blueprint -# clean: cleanup after test -# Test: -# monitor: attach to the collector VM and run the VES Monitor -# traffic: generate some traffic -# pause: pause the VNF (web server) for a minute to generate a state change -# VDU1|VDU2 -# nic: timed ifdown/ifup to generate a NIC fault report (not yet implemented) - -trap 'fail' ERR - -pass() { - echo "$0: $(date) Hooray!" - exit 0 -} - -fail() { - echo "$0: $(date) Test Failed!" - exit 1 -} - -get_floating_net () { - network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}')) - for id in ${network_ids[@]}; do - [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && FLOATING_NETWORK_ID=${id} - done - if [[ $FLOATING_NETWORK_ID ]]; then - FLOATING_NETWORK_NAME=$(openstack network show $FLOATING_NETWORK_ID | awk "/ name / { print \$4 }") - else - echo "$0: $(date) Floating network not found" - exit 1 - fi -} - -try () { - count=$1 - $3 - while [[ $? -eq 1 && $count -gt 0 ]] - do - sleep $2 - let count=$count-1 - $3 - done - if [[ $count -eq 0 ]]; then echo "$0: $(date) Command \"$3\" was not successful after $1 tries"; fi -} - -setup () { - echo "$0: $(date) Started" - echo "$0: $(date) Setup temp test folder /tmp/tacker and copy this script there" - mkdir -p /tmp/tacker - chmod 777 /tmp/tacker/ - cp $0 /tmp/tacker/. - chmod 755 /tmp/tacker/*.sh - - echo "$0: $(date) tacker-setup part 1" - wget https://git.opnfv.org/cgit/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker/tacker-setup.sh - bash /tmp/tacker/tacker-setup.sh tacker-cli init - - echo "$0: $(date) tacker-setup part 2" - CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }") - dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` - if [ "$dist" == "Ubuntu" ]; then - echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security" - juju set neutron-api enable-ml2-port-security=true - - echo "$0: $(date) Execute tacker-setup.sh in the container" - sudo docker exec -it $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup - else - echo "$0: $(date) Copy private key to the container (needed for later install steps)" - cp ~/.ssh/id_rsa /tmp/tacker/id_rsa - echo "$0: $(date) Execute tacker-setup.sh in the container" - sudo docker exec -i -t $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup - fi - - echo "$0: $(date) reset blueprints folder" - if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-ves ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-ves; fi - mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-ves - - echo "$0: $(date) copy tosca-vnfd-hello-ves to blueprints folder" - cp -r blueprints/tosca-vnfd-hello-ves /tmp/tacker/blueprints - - # Following two steps are in testing still. The guestfish step needs work. - - # echo "$0: $(date) Create Nova key pair" - # mkdir -p ~/.ssh - # nova keypair-delete vHello - # nova keypair-add vHello > /tmp/tacker/vHello.pem - # chmod 600 /tmp/tacker/vHello.pem - # pubkey=$(nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g') - # nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g' >/tmp/tacker/vHello.pub - - echo "$0: $(date) Inject key into xenial server image" - # wget http://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img - # sudo yum install -y libguestfs-tools - # guestfish <<EOF -#add xenial-server-cloudimg-amd64-disk1.img -#run -#mount /dev/sda1 / -#mkdir /home/ubuntu -#mkdir /home/ubuntu/.ssh -#cat <<EOM >/home/ubuntu/.ssh/authorized_keys -#$pubkey -#EOM -#exit -#chown -R ubuntu /home/ubuntu -#EOF - - # Using pre-key-injected image for now, vHello.pem as provided in the blueprint - if [ ! -f /tmp/xenial-server-cloudimg-amd64-disk1.img ]; then - wget -O /tmp/xenial-server-cloudimg-amd64-disk1.img http://artifacts.opnfv.org/models/images/xenial-server-cloudimg-amd64-disk1.img - fi - cp blueprints/tosca-vnfd-hello-ves/vHello.pem /tmp/tacker - chmod 600 /tmp/tacker/vHello.pem - - echo "$0: $(date) setup OpenStack CLI environment" - source /tmp/tacker/admin-openrc.sh - - echo "$0: $(date) Setup image_id" - image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }") - if [[ -z "$image_id" ]]; then glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --file /tmp/xenial-server-cloudimg-amd64-disk1.img --container-format bare; fi - - echo "$0: $(date) Completed" -} - -start() { - echo "$0: $(date) Started" - echo "$0: $(date) setup OpenStack CLI environment" - source /tmp/tacker/admin-openrc.sh - - echo "$0: $(date) create VNFD" - cd /tmp/tacker/blueprints/tosca-vnfd-hello-ves - tacker vnfd-create --vnfd-file blueprint.yaml --name hello-ves - if [ $? -eq 1 ]; then fail; fi - - echo "$0: $(date) create VNF" - tacker vnf-create --vnfd-name hello-ves --name hello-ves - if [ $? -eq 1 ]; then fail; fi - - echo "$0: $(date) wait for hello-ves to go ACTIVE" - active="" - while [[ -z $active ]] - do - active=$(tacker vnf-show hello-ves | grep ACTIVE) - if [ "$(tacker vnf-show hello-ves | grep -c ERROR)" == "1" ]; then - echo "$0: $(date) hello-ves VNF creation failed with state ERROR" - fail - fi - sleep 10 - done - - echo "$0: $(date) directly set port security on ports (bug/unsupported in Mitaka Tacker?)" - vdus="VDU1 VDU2 VDU3 VDU4" - vdui="1 2 3 4" - declare -a vdu_id=() - declare -a vdu_ip=() - declare -a vdu_url=() - HEAT_ID=$(tacker vnf-show hello-ves | awk "/instance_id/ { print \$4 }") - vdu_id[1]=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }") - vdu_id[2]=$(openstack stack resource list $HEAT_ID | awk "/VDU2 / { print \$4 }") - vdu_id[3]=$(openstack stack resource list $HEAT_ID | awk "/VDU3 / { print \$4 }") - vdu_id[4]=$(openstack stack resource list $HEAT_ID | awk "/VDU4 / { print \$4 }") - -cat >/tmp/grep <<EOF -${vdu_id[1]} -${vdu_id[2]} -${vdu_id[3]} -${vdu_id[4]} -EOF - id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}')) - for id in ${id[@]}; do - if [[ $(neutron port-show $id | grep -f /tmp/grep) ]]; then - neutron port-update ${id} --port-security-enabled=True - fi - done - - echo "$0: $(date) directly assign security group (unsupported in Mitaka Tacker)" - if [[ $(openstack security group list | awk "/ vHello / { print \$2 }") ]]; then openstack security group delete vHello; fi - openstack security group create vHello - openstack security group rule create --ingress --protocol TCP --dst-port 22:22 vHello - openstack security group rule create --ingress --protocol TCP --dst-port 80:80 vHello - for i in $vdui; do - openstack server add security group ${vdu_id[$i]} vHello - openstack server add security group ${vdu_id[$i]} default - done - - echo "$0: $(date) associate floating IPs" - get_floating_net - for i in $vdui; do - vdu_ip[$i]=$(openstack floating ip create $FLOATING_NETWORK_NAME | awk "/floating_ip_address/ { print \$4 }") - nova floating-ip-associate ${vdu_id[$i]} ${vdu_ip[$i]} - done - - echo "$0: $(date) get web server addresses" - vdu_url[1]="http://${vdu_ip[1]}" - vdu_url[2]="http://${vdu_ip[3]}" - vdu_url[3]="http://${vdu_ip[3]}" - vdu_url[4]="http://${vdu_ip[4]}:30000/eventListener/v1" - - if [[ -f /tmp/tacker/id_rsa ]]; then - echo "$0: $(date) setup private key for ssh to hypervisors" - cp -p /tmp/tacker/id_rsa ~/.ssh/id_rsa - chown root ~/.ssh/id_rsa - chmod 600 ~/.ssh/id_rsa - fi - - echo "$0: $(date) start collectd agent on bare metal hypervisor hosts" - hosts=($(openstack hypervisor list | grep -v Hostname | grep -v "+" | awk '{print $4}')) - for host in ${hosts[@]}; do - ip=$(openstack hypervisor show $host | grep host_ip | awk '{print $4}') - if [[ "$OS_CLOUDNAME" == "overcloud" ]]; then - u="heat-admin" - p="" - else - u="ubuntu" - p=":ubuntu" - fi - scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh $u@$ip:/home/$u/start.sh - ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $u$p@$ip \ - "nohup bash /home/$u/start.sh collectd $ip ${vdu_ip[4]} hello world > /dev/null 2>&1 &" - done - - echo "$0: $(date) wait 30 seconds for server SSH to be available" - sleep 30 - - echo "$0: $(date) Copy startup script to the VMs" - for i in $vdui; do - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[$i]} "sudo chown ubuntu /home/ubuntu" - scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh ubuntu@${vdu_ip[$i]}:/home/ubuntu/start.sh - done - - echo "$0: $(date) start vHello webserver in VDU1 at ${vdu_ip[1]}" - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \ - ubuntu@${vdu_ip[1]} "nohup bash /home/ubuntu/start.sh webserver ${vdu_id[1]} ${vdu_ip[4]} hello world > /dev/null 2>&1 &" - - echo "$0: $(date) start vHello webserver in VDU2 at ${vdu_ip[2]}" - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \ - ubuntu@${vdu_ip[2]} "nohup bash /home/ubuntu/start.sh webserver ${vdu_id[2]} ${vdu_ip[4]} hello world > /dev/null 2>&1 &" - - echo "$0: $(date) start LB in VDU3 at ${vdu_ip[3]}" - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \ - ubuntu@${vdu_ip[3]} "nohup bash /home/ubuntu/start.sh lb ${vdu_id[3]} ${vdu_ip[4]} hello world ${vdu_ip[1]} ${vdu_ip[2]} > /dev/null 2>&1 &" - - echo "$0: $(date) start Monitor in VDU4 at ${vdu_ip[4]}" - # Replacing the default collector with monitor.py which has processing logic as well - scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/monitor.py ubuntu@${vdu_ip[4]}:/home/ubuntu/monitor.py - ssh -i /tmp/tacker/vHello.pem -t -t -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[4]} "bash /home/ubuntu/start.sh monitor ${vdu_id[1]} ${vdu_id[2]} ${vdu_id[3]} hello world" - -# echo "$0: $(date) verify vHello server is running at http://${vdu_ip[3]}" -# apt-get install -y curl -# count=10 -# while [[ $count -gt 0 ]] -# do -# sleep 60 -# let count=$count-1 -# if [[ $(curl http://${vdu_ip[3]} | grep -c "Hello World") > 0 ]]; then pass; fi -# done -# fail -} - -stop() { - echo "$0: $(date) setup OpenStack CLI environment" - source /tmp/tacker/admin-openrc.sh - - echo "$0: $(date) uninstall vHello blueprint via CLI" - vid=($(tacker vnf-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnf-delete ${id}; done - vid=($(tacker vnfd-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnfd-delete ${id}; done -# Need to remove the floatingip deletion or make it specific to the vHello VM - fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done - sg=($(openstack security group list|grep vHello|awk '{print $2}')) - for id in ${sg[@]}; do try 10 5 "openstack security group delete ${id}"; done - - echo "$0: $(date) remove collectd agent on bare metal hypervisor hosts" - hosts=($(openstack hypervisor list | grep -v Hostname | grep -v "+" | awk '{print $4}')) - for host in ${hosts[@]}; do - ip=$(openstack hypervisor show $host | grep host_ip | awk '{print $4}') - if [[ "$OS_CLOUDNAME" == "overcloud" ]]; then - u="heat-admin" - p="" - else - u="ubuntu" - p=":ubuntu" - fi - ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $u$p@$ip <<'EOF' -dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` -if [ "$dist" == "Ubuntu" ]; then - sudo service collectd stop - sudo apt-get remove -y collectd - sudo rm /etc/collectd/collectd.conf -else - sudo service collectd stop - sudo yum remove -y collectd - sudo rm /etc/collectd.conf -fi -rm -rf $HOME/OpenStackBarcelonaDemo -EOF - done -} - -# -# Test tools and scenarios -# - -get_vdu_ip () { - source /tmp/tacker/admin-openrc.sh - - echo "$0: $(date) find VM IP for $1" - ip=$(openstack server list | awk "/$1/ { print \$10 }") -} - -monitor () { - echo "$0: $(date) Start the VES Monitor in VDU4 - Stop first if running" - get_vdu_ip VDU4 - sudo cp /tmp/tacker/vHello.pem /tmp/vHello.pem - sudo chown $USER:$USER /tmp/vHello.pem - chmod 600 /tmp/vHello.pem - ssh -t -t -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip << 'EOF' -sudo kill $(ps -ef | grep evel-test-collector | awk '{print $2}') -python monitor.py --config evel-test-collector/config/collector.conf --section default -EOF -} - -traffic () { - echo "$0: $(date) Generate some traffic, somewhat randomly" - get_vdu_ip VDU3 - ns="0 00 000" - while true - do - for n in $ns; do - sleep .$n$[ ( $RANDOM % 10 ) + 1 ]s - curl -s http://$ip > /dev/null - done - done -} - -pause () { - echo "$0: $(date) Pause the VNF (web server) in $1 for 30 seconds to generate a state change fault report (Stopped)" - get_vdu_ip $1 - ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker pause vHello" - sleep 20 - echo "$0: $(date) Unpausing the VNF to generate a state change fault report (Started)" - ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker unpause vHello" -} - -forward_to_container () { - echo "$0: $(date) pass $1 command to this script in the tacker container" - CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }") - sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_VES.sh $1 $1 - if [ $? -eq 1 ]; then fail; fi -} - -dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` -case "$1" in - setup) - setup - pass - ;; - run) - setup - forward_to_container start - pass - ;; - start|stop) - if [[ $# -eq 1 ]]; then forward_to_container $1 - else - # running inside the tacker container, ready to go - $1 - fi - pass - ;; - traffic) - $1 - pass - ;; - test) - $2 $3 - ;; - clean) - echo "$0: $(date) Uninstall Tacker and test environment" - bash /tmp/tacker/tacker-setup.sh $1 clean - pass - ;; - *) - echo "usage: bash vHello_VES.sh [setup|start|run|clean]" - echo "setup: setup test environment" - echo "start: install blueprint and run test" - echo "run: setup test environment and run test" - echo "stop: stop test and uninstall blueprint" - echo "clean: cleanup after test" - echo "usage: bash vHello_VES.sh [setup|start|run|test|stop|clean] [monitor|traffic|pause|nic]" - echo "setup: setup test environment" - echo "start: install blueprint and run test" - echo "run: setup test environment and run test" - echo "test: run test tools/scenario - see below" - echo "stop: stop test and uninstall blueprint" - echo "clean: cleanup after test" - echo "Test:" - echo " monitor: attach to the collector VM and run the VES Monitor" - echo " traffic: generate some traffic" - echo " pause: pause the VNF (web server) for a minute to generate a state change" - fail -esac |