diff options
Diffstat (limited to 'tests/vHello_VES.sh')
| -rw-r--r-- | tests/vHello_VES.sh | 179 |
1 files changed, 89 insertions, 90 deletions
diff --git a/tests/vHello_VES.sh b/tests/vHello_VES.sh index b0d0d0f..ea05d7f 100644 --- a/tests/vHello_VES.sh +++ b/tests/vHello_VES.sh @@ -21,7 +21,7 @@ # How to use: # $ git clone https://gerrit.opnfv.org/gerrit/ves # $ cd ves/tests -# $ bash vHello_VES.sh [setup|start|run|test|stop|clean] +# $ bash vHello_VES.sh [setup|start|run|test|stop|clean] [VDU1|VDU2|VDU3] # [monitor|traffic|pause|nic] # setup: setup test environment # start: install blueprint and run test @@ -33,19 +33,18 @@ # monitor: attach to the collector VM and run the VES Monitor # traffic: generate some traffic # pause: pause the VNF (web server) for a minute to generate a state change -# nic: timed ifdown/ifup to generate a NIC fault report +# VDU1|VDU2 +# nic: timed ifdown/ifup to generate a NIC fault report (not yet implemented) trap 'fail' ERR pass() { - echo "$0: Hooray!" - set +x #echo off + echo "$0: $(date) Hooray!" exit 0 } fail() { - echo "$0: Test Failed!" - set +x + echo "$0: $(date) Test Failed!" exit 1 } @@ -57,7 +56,7 @@ get_floating_net () { if [[ $FLOATING_NETWORK_ID ]]; then FLOATING_NETWORK_NAME=$(openstack network show $FLOATING_NETWORK_ID | awk "/ name / { print \$4 }") else - echo "$0: Floating network not found" + echo "$0: $(date) Floating network not found" exit 1 fi } @@ -71,44 +70,45 @@ try () { let count=$count-1 $3 done - if [[ $count -eq 0 ]]; then echo "$0: Command \"$3\" was not successful after $1 tries"; fi + if [[ $count -eq 0 ]]; then echo "$0: $(date) Command \"$3\" was not successful after $1 tries"; fi } setup () { - echo "$0: Setup temp test folder /tmp/tacker and copy this script there" + echo "$0: $(date) Started" + echo "$0: $(date) Setup temp test folder /tmp/tacker and copy this script there" mkdir -p /tmp/tacker chmod 777 /tmp/tacker/ cp $0 /tmp/tacker/. chmod 755 /tmp/tacker/*.sh - echo "$0: tacker-setup part 1" + echo "$0: $(date) tacker-setup part 1" wget https://git.opnfv.org/cgit/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker/tacker-setup.sh bash /tmp/tacker/tacker-setup.sh tacker-cli init - echo "$0: tacker-setup part 2" + echo "$0: $(date) tacker-setup part 2" CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }") dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` if [ "$dist" == "Ubuntu" ]; then - echo "$0: JOID workaround for Colorado - enable ML2 port security" + echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security" juju set neutron-api enable-ml2-port-security=true - echo "$0: Execute tacker-setup.sh in the container" + echo "$0: $(date) Execute tacker-setup.sh in the container" sudo docker exec -it $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup else - echo "$0: Execute tacker-setup.sh in the container" + echo "$0: $(date) Execute tacker-setup.sh in the container" sudo docker exec -i -t $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup fi - echo "$0: reset blueprints folder" + echo "$0: $(date) reset blueprints folder" if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-ves ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-ves; fi mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-ves - echo "$0: copy tosca-vnfd-hello-ves to blueprints folder" + echo "$0: $(date) copy tosca-vnfd-hello-ves to blueprints folder" cp -r blueprints/tosca-vnfd-hello-ves /tmp/tacker/blueprints # Following two steps are in testing still. The guestfish step needs work. - # echo "$0: Create Nova key pair" + # echo "$0: $(date) Create Nova key pair" # mkdir -p ~/.ssh # nova keypair-delete vHello # nova keypair-add vHello > /tmp/tacker/vHello.pem @@ -116,7 +116,7 @@ setup () { # pubkey=$(nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g') # nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g' >/tmp/tacker/vHello.pub - echo "$0: Inject key into xenial server image" + echo "$0: $(date) Inject key into xenial server image" # wget http://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img # sudo yum install -y libguestfs-tools # guestfish <<EOF @@ -139,58 +139,68 @@ setup () { cp blueprints/tosca-vnfd-hello-ves/vHello.pem /tmp/tacker chmod 600 /tmp/tacker/vHello.pem - echo "$0: setup OpenStack CLI environment" + echo "$0: $(date) setup OpenStack CLI environment" source /tmp/tacker/admin-openrc.sh - echo "$0: Setup image_id" + echo "$0: $(date) Setup image_id" image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }") - if [[ -z "$image_id" ]]; then glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --file /tmp/xenial-server-cloudimg-amd64-disk1.img --container-format bare; fi + if [[ -z "$image_id" ]]; then glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --file /tmp/xenial-server-cloudimg-amd64-disk1.img --container-format bare; fi + + echo "$0: $(date) Completed" } start() { - echo "$0: setup OpenStack CLI environment" + echo "$0: $(date) Started" + echo "$0: $(date) setup OpenStack CLI environment" source /tmp/tacker/admin-openrc.sh - echo "$0: create VNFD" + echo "$0: $(date) create VNFD" cd /tmp/tacker/blueprints/tosca-vnfd-hello-ves tacker vnfd-create --vnfd-file blueprint.yaml --name hello-ves if [ $? -eq 1 ]; then fail; fi - echo "$0: create VNF" + echo "$0: $(date) create VNF" tacker vnf-create --vnfd-name hello-ves --name hello-ves if [ $? -eq 1 ]; then fail; fi - echo "$0: wait for hello-ves to go ACTIVE" + echo "$0: $(date) wait for hello-ves to go ACTIVE" active="" while [[ -z $active ]] do active=$(tacker vnf-show hello-ves | grep ACTIVE) if [ "$(tacker vnf-show hello-ves | grep -c ERROR)" == "1" ]; then - echo "$0: hello-ves VNF creation failed with state ERROR" + echo "$0: $(date) hello-ves VNF creation failed with state ERROR" fail fi sleep 10 done - echo "$0: directly set port security on ports (bug/unsupported in Mitaka Tacker?)" + echo "$0: $(date) directly set port security on ports (bug/unsupported in Mitaka Tacker?)" vdus="VDU1 VDU2 VDU3 VDU4" vdui="1 2 3 4" declare -a vdu_id=() declare -a vdu_ip=() declare -a vdu_url=() HEAT_ID=$(tacker vnf-show hello-ves | awk "/instance_id/ { print \$4 }") - for i in $vdui; do - vdu_id[$i]=$(openstack stack resource list $HEAT_ID | awk "/$vdu / { print \$4 }") - done - + vdu_id[1]=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }") + vdu_id[2]=$(openstack stack resource list $HEAT_ID | awk "/VDU2 / { print \$4 }") + vdu_id[3]=$(openstack stack resource list $HEAT_ID | awk "/VDU3 / { print \$4 }") + vdu_id[4]=$(openstack stack resource list $HEAT_ID | awk "/VDU4 / { print \$4 }") + +cat >/tmp/grep <<EOF +${vdu_id[1]} +${vdu_id[2]} +${vdu_id[3]} +${vdu_id[4]} +EOF id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}')) for id in ${id[@]}; do - if [[ $(neutron port-show $id|grep -e ${vdu_id[1]} -e ${vdu_id[2]} -e ${vdu_id[3]} -e ${vdu_id[4]}) ]]; then + if [[ $(neutron port-show $id | grep -f /tmp/grep) ]]; then neutron port-update ${id} --port-security-enabled=True fi done - echo "$0: directly assign security group (unsupported in Mitaka Tacker)" + echo "$0: $(date) directly assign security group (unsupported in Mitaka Tacker)" if [[ $(openstack security group list | awk "/ vHello / { print \$2 }") ]]; then openstack security group delete vHello; fi openstack security group create vHello openstack security group rule create --ingress --protocol TCP --dst-port 22:22 vHello @@ -200,79 +210,65 @@ start() { openstack server add security group ${vdu_id[$i]} default done - echo "$0: associate floating IPs" + echo "$0: $(date) associate floating IPs" get_floating_net for i in $vdui; do vdu_ip[$i]=$(openstack floating ip create $FLOATING_NETWORK_NAME | awk "/floating_ip_address/ { print \$4 }") nova floating-ip-associate ${vdu_id[$i]} ${vdu_ip[$i]} done - echo "$0: get web server addresses" + echo "$0: $(date) get web server addresses" vdu_url[1]="http://${vdu_ip[1]}" vdu_url[2]="http://${vdu_ip[3]}" vdu_url[3]="http://${vdu_ip[3]}" vdu_url[4]="http://${vdu_ip[4]}:30000/eventListener/v1" - echo "$0: wait 30 seconds for server SSH to be available" + echo "$0: $(date) wait 30 seconds for server SSH to be available" sleep 30 - echo "$0: Setup the VES Collector in VDU4" - chown root /tmp/tacker/vHello.pem - # Note below: python (2.7) is required due to dependency on module 'ConfigParser' - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[4]} << EOF -sudo apt-get update -sudo apt-get upgrade -y -sudo apt-get install -y python python-jsonschema -sudo mkdir /var/log/att -sudo chown ubuntu /var/log/att -touch /var/log/att/collector.log -sudo chown ubuntu /home/ubuntu/ -cd /home/ubuntu/ -git clone https://github.com/att/evel-test-collector.git -sed -i -- 's/vel_username = /vel_username = hello/' evel-test-collector/config/collector.conf -sed -i -- 's/vel_password = /vel_password = world/' evel-test-collector/config/collector.conf -EOF - # Replacing the default collector with monitor.py which has processing logic as well - scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/monitor.py ubuntu@${vdu_ip[4]}:/home/ubuntu/monitor.py - - echo "$0: start LB in VDU3" - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[3]} <<EOF -sudo iptables -A PREROUTING -i eth0 -p tcp --dport 80 -m state --state NEW -m nth --counter 0 --every 2 --packet 0 -j DNAT --to-destination ${vdu_ip[1]} -sudo iptables -A PREROUTING -i eth0 -p tcp --dport 80 -m state --state NEW -m nth --counter 0 --every 2 --packet 1 -j DNAT --to-destination ${vdu_ip[2]} -EOF - - echo "$0: start vHello web server in VDU1/VDU2" - vdu1="1 2" + echo "$0: $(date) Copy startup script to the VMs" for i in $vdui; do - echo "$0: start vHello web server at ${vdu_ip[$i]}" ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[$i]} "sudo chown ubuntu /home/ubuntu" scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh ubuntu@${vdu_ip[$i]}:/home/ubuntu/start.sh - ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[$i]} "bash /home/ubuntu/start.sh ${vdu_id[$i]} ${vdu_ip[$i]} hello world" done - echo "$0: verify vHello server is running at http://${vdu_ip[3]}" - apt-get install -y curl - count=10 - while [[ $count -gt 0 ]] - do - sleep 60 - let count=$count-1 - if [[ $(curl http://${vdu_ip[3]} | grep -c "Hello World") > 0 ]]; then pass; fi - done - fail + echo "$0: $(date) start vHello webserver in VDU1 at ${vdu_ip[1]}" + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[1]} "bash /home/ubuntu/start.sh webserver ${vdu_id[1]} ${vdu_ip[4]} hello world; exit" + + echo "$0: $(date) start vHello webserver in VDU2 at ${vdu_ip[2]}" + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[2]} "bash /home/ubuntu/start.sh webserver ${vdu_id[2]} ${vdu_ip[4]} hello world; exit" + + echo "$0: $(date) start LB in VDU3 at ${vdu_ip[3]}" + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[3]} "bash /home/ubuntu/start.sh lb ${vdu_id[3]} ${vdu_ip[4]} hello world; exit" + + echo "$0: $(date) start Monitor in VDU4 at ${vdu_ip[4]}" + # Replacing the default collector with monitor.py which has processing logic as well + scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/monitor.py ubuntu@${vdu_ip[4]}:/home/ubuntu/monitor.py + ssh -i /tmp/tacker/vHello.pem -t -t -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[4]} "bash /home/ubuntu/start.sh monitor ${vdu_id[4]} ${vdu_ip[4]} hello world; exit" + +# echo "$0: $(date) verify vHello server is running at http://${vdu_ip[3]}" +# apt-get install -y curl +# count=10 +# while [[ $count -gt 0 ]] +# do +# sleep 60 +# let count=$count-1 +# if [[ $(curl http://${vdu_ip[3]} | grep -c "Hello World") > 0 ]]; then pass; fi +# done +# fail } stop() { - echo "$0: setup OpenStack CLI environment" + echo "$0: $(date) setup OpenStack CLI environment" source /tmp/tacker/admin-openrc.sh - echo "$0: uninstall vHello blueprint via CLI" + echo "$0: $(date) uninstall vHello blueprint via CLI" vid=($(tacker vnf-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnf-delete ${id}; done vid=($(tacker vnfd-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnfd-delete ${id}; done # Need to remove the floatingip deletion or make it specific to the vHello VM -# fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done + fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done sg=($(openstack security group list|grep vHello|awk '{print $2}')) - for id in ${sg[@]}; do try 5 5 "openstack security group delete ${id}"; done + for id in ${sg[@]}; do try 10 5 "openstack security group delete ${id}"; done } # @@ -282,12 +278,12 @@ stop() { get_vdu_ip () { source /tmp/tacker/admin-openrc.sh - echo "$0: find VM IP for $1" + echo "$0: $(date) find VM IP for $1" ip=$(openstack server list | awk "/$1/ { print \$10 }") } monitor () { - echo "$0: Start the VES Monitor in VDU4 - Stop first if running" + echo "$0: $(date) Start the VES Monitor in VDU4 - Stop first if running" get_vdu_ip VDU4 sudo cp /tmp/tacker/vHello.pem /tmp/vHello.pem sudo chown $USER:$USER /tmp/vHello.pem @@ -299,26 +295,29 @@ EOF } traffic () { - echo "$0: Generate some traffic, somewhat randomly" + echo "$0: $(date) Generate some traffic, somewhat randomly" get_vdu_ip VDU3 + ns="0 00 000" while true do - sleep .0$[ ( $RANDOM % 10 ) + 1 ]s - curl -s http://$ip > /dev/null + for n in $ns; do + sleep .$n$[ ( $RANDOM % 10 ) + 1 ]s + curl -s http://$ip > /dev/null + done done } pause () { - echo "$0: Pause the VNF (web server) in VDU1 for a minute to generate a state change fault report (Stopped)" - get_vdu_ip VDU1 + echo "$0: $(date) Pause the VNF (web server) in $1 for a minute to generate a state change fault report (Stopped)" + get_vdu_ip $1 ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker pause vHello" sleep 60 - echo "$0: Unpausing the VNF to generate a state change fault report (Started)" + echo "$0: $(date) Unpausing the VNF to generate a state change fault report (Started)" ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker unpause vHello" } forward_to_container () { - echo "$0: pass $1 command to this script in the tacker container" + echo "$0: $(date) pass $1 command to this script in the tacker container" CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }") sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_VES.sh $1 $1 if [ $? -eq 1 ]; then fail; fi @@ -348,10 +347,10 @@ case "$1" in pass ;; test) - $2 + $2 $3 ;; clean) - echo "$0: Uninstall Tacker and test environment" + echo "$0: $(date) Uninstall Tacker and test environment" bash /tmp/tacker/tacker-setup.sh $1 clean pass ;; |