diff options
Diffstat (limited to 'tests/vHello_VES.sh')
-rw-r--r-- | tests/vHello_VES.sh | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/tests/vHello_VES.sh b/tests/vHello_VES.sh new file mode 100644 index 0000000..85120d2 --- /dev/null +++ b/tests/vHello_VES.sh @@ -0,0 +1,322 @@ +#!/bin/bash +# Copyright 2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# What this is: Deployment test for the VES agent and collector based +# upon the Tacker Hello World blueprint +# +# Status: this is a work in progress, under test. +# +# How to use: +# $ git clone https://gerrit.opnfv.org/gerrit/ves +# $ cd ves/tests +# $ bash vHello_VES.sh [setup|start|run|stop|clean|collector] +# setup: setup test environment +# start: install blueprint and run test +# run: setup test environment and run test +# stop: stop test and uninstall blueprint +# clean: cleanup after test +# collector: attach to the collector VM and run the collector + +set -x + +trap 'fail' ERR + +pass() { + echo "$0: Hooray!" + set +x #echo off + exit 0 +} + +fail() { + echo "$0: Test Failed!" + set +x + exit 1 +} + +get_floating_net () { + network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}')) + for id in ${network_ids[@]}; do + [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && FLOATING_NETWORK_ID=${id} + done + if [[ $FLOATING_NETWORK_ID ]]; then + FLOATING_NETWORK_NAME=$(openstack network show $FLOATING_NETWORK_ID | awk "/ name / { print \$4 }") + else + echo "$0: Floating network not found" + exit 1 + fi +} + +try () { + count=$1 + $3 + while [[ $? -eq 1 && $count -gt 0 ]] + do + sleep $2 + let count=$count-1 + $3 + done + if [[ $count -eq 0 ]]; then echo "$0: Command \"$3\" was not successful after $1 tries"; fi +} + +setup () { + echo "$0: Setup temp test folder /tmp/tacker and copy this script there" + mkdir -p /tmp/tacker + chmod 777 /tmp/tacker/ + cp $0 /tmp/tacker/. + chmod 755 /tmp/tacker/*.sh + + echo "$0: tacker-setup part 1" + wget https://git.opnfv.org/cgit/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker/tacker-setup.sh + bash /tmp/tacker/tacker-setup.sh tacker-cli init + + echo "$0: tacker-setup part 2" + CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }") + dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` + if [ "$dist" == "Ubuntu" ]; then + echo "$0: JOID workaround for Colorado - enable ML2 port security" + juju set neutron-api enable-ml2-port-security=true + + echo "$0: Execute tacker-setup.sh in the container" + sudo docker exec -it $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup + else + echo "$0: Execute tacker-setup.sh in the container" + sudo docker exec -i -t $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup + fi + + echo "$0: reset blueprints folder" + if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-ves ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-ves; fi + mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-ves + + echo "$0: copy tosca-vnfd-hello-ves to blueprints folder" + cp -r blueprints/tosca-vnfd-hello-ves /tmp/tacker/blueprints + + # Following two steps are in testing still. The guestfish step needs work. + + # echo "$0: Create Nova key pair" + # mkdir -p ~/.ssh + # nova keypair-delete vHello + # nova keypair-add vHello > /tmp/tacker/vHello.pem + # chmod 600 /tmp/tacker/vHello.pem + # pubkey=$(nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g') + # nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g' >/tmp/tacker/vHello.pub + + echo "$0: Inject key into xenial server image" + # wget http://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img + # sudo yum install -y libguestfs-tools + # guestfish <<EOF +#add xenial-server-cloudimg-amd64-disk1.img +#run +#mount /dev/sda1 / +#mkdir /home/ubuntu +#mkdir /home/ubuntu/.ssh +#cat <<EOM >/home/ubuntu/.ssh/authorized_keys +#$pubkey +#EOM +#exit +#chown -R ubuntu /home/ubuntu +#EOF + + # Using pre-key-injected image for now, vHello.pem as provided in the blueprint + if [ ! -f /tmp/xenial-server-cloudimg-amd64-disk1.img ]; then + wget -O /tmp/xenial-server-cloudimg-amd64-disk1.img http://artifacts.opnfv.org/models/images/xenial-server-cloudimg-amd64-disk1.img + fi + cp blueprints/tosca-vnfd-hello-ves/vHello.pem /tmp/tacker + chmod 600 /tmp/tacker/vHello.pem + + echo "$0: setup OpenStack CLI environment" + source /tmp/tacker/admin-openrc.sh + + echo "$0: Setup image_id" + image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }") + if [[ -z "$image_id" ]]; then glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --file /tmp/xenial-server-cloudimg-amd64-disk1.img --container-format bare; fi +} + +start() { + echo "$0: setup OpenStack CLI environment" + source /tmp/tacker/admin-openrc.sh + + echo "$0: create VNFD" + cd /tmp/tacker/blueprints/tosca-vnfd-hello-ves + tacker vnfd-create --vnfd-file blueprint.yaml --name hello-ves + if [ $? -eq 1 ]; then fail; fi + + echo "$0: create VNF" + tacker vnf-create --vnfd-name hello-ves --name hello-ves + if [ $? -eq 1 ]; then fail; fi + + echo "$0: wait for hello-ves to go ACTIVE" + active="" + while [[ -z $active ]] + do + active=$(tacker vnf-show hello-ves | grep ACTIVE) + if [ "$(tacker vnf-show hello-ves | grep -c ERROR)" == "1" ]; then + echo "$0: hello-ves VNF creation failed with state ERROR" + fail + fi + sleep 10 + done + + echo "$0: directly set port security on ports (bug/unsupported in Mitaka Tacker?)" + HEAT_ID=$(tacker vnf-show hello-ves | awk "/instance_id/ { print \$4 }") + VDU1_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }") + id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}')) + for id in ${id[@]}; do + if [[ $(neutron port-show $id|grep $VDU1_ID) ]]; then neutron port-update ${id} --port-security-enabled=True; fi + done + + VDU2_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU2 / { print \$4 }") + id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}')) + for id in ${id[@]}; do + if [[ $(neutron port-show $id|grep $VDU2_ID) ]]; then neutron port-update ${id} --port-security-enabled=True; fi + done + + echo "$0: directly assign security group (unsupported in Mitaka Tacker)" + if [[ $(openstack security group list | awk "/ vHello / { print \$2 }") ]]; then openstack security group delete vHello; fi + openstack security group create vHello + openstack security group rule create --ingress --protocol TCP --dst-port 22:22 vHello + openstack security group rule create --ingress --protocol TCP --dst-port 80:80 vHello + openstack server add security group $VDU1_ID vHello + openstack server add security group $VDU1_ID default + openstack server add security group $VDU2_ID vHello + openstack server add security group $VDU2_ID default + + echo "$0: associate floating IPs" + get_floating_net + FIP=$(openstack floating ip create $FLOATING_NETWORK_NAME | awk "/floating_ip_address/ { print \$4 }") + nova floating-ip-associate $VDU1_ID $FIP + FIP=$(openstack floating ip create $FLOATING_NETWORK_NAME | awk "/floating_ip_address/ { print \$4 }") + nova floating-ip-associate $VDU2_ID $FIP + + echo "$0: get web server addresses" + VDU1_IP=$(openstack server show $VDU1_ID | awk "/ addresses / { print \$6 }") + VDU1_URL="http://$VUD1_IP" + VDU2_IP=$(openstack server show $VDU2_ID | awk "/ addresses / { print \$6 }") + VDU2_URL="http://$VUD2_IP:30000" + + echo "$0: wait 30 seconds for server SSH to be available" + sleep 30 + + echo "$0: Setup the VES Collector in VDU2" + chown root /tmp/tacker/vHello.pem + # Note below: python (2.7) is required due to dependency on module 'ConfigParser' + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$VDU2_IP << EOF +sudo apt-get update +sudo apt-get upgrade -y +sudo apt-get install -y python python-jsonschema +sudo mkdir /var/log/att +sudo chown ubuntu /var/log/att +touch /var/log/att/collector.log +sudo chown ubuntu /home/ubuntu/ +cd /home/ubuntu/ +git clone https://github.com/att/evel-test-collector.git +sed -i -- 's/vel_username = /vel_username = hello/' evel-test-collector/config/collector.conf +sed -i -- 's/vel_password = /vel_password = world/' evel-test-collector/config/collector.conf +nohup python evel-test-collector/code/collector/collector.py \ + --config evel-test-collector/config/collector.conf \ + --section default \ + --verbose > ~/collector.log & +exit +EOF + + echo "$0: start vHello web server in VDU1" + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$VDU1_IP "sudo chown ubuntu /home/ubuntu" + scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh ubuntu@$VDU1_IP:/home/ubuntu/start.sh + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$VDU1_IP "bash /home/ubuntu/start.sh $VDU2_IP hello:world" + + echo "$0: verify vHello server is running" + apt-get install -y curl + count=10 + while [[ $count -gt 0 ]] + do + sleep 60 + let count=$count-1 + if [[ $(curl http://$VDU1_IP | grep -c "Hello World") == 1 ]]; then pass; fi + done + fail +} + +collector () { + echo "$0: setup OpenStack CLI environment" + source /tmp/tacker/admin-openrc.sh + + echo "$0: find Collector VM IP" + HEAT_ID=$(tacker vnf-show hello-ves | awk "/instance_id/ { print \$4 }") + VDU2_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU2 / { print \$4 }") + VDU2_IP=$(openstack server show $VDU2_ID | awk "/ addresses / { print \$6 }") + VDU2_URL="http://$VUD2_IP:30000" + + echo "$0: Start the VES Collector in VDU2" + ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$VDU2_IP << EOF +cd /home/ubuntu/ +python evel-test-collector/code/collector/collector.py \ + --config evel-test-collector/config/collector.conf \ + --section default \ + --verbose +EOF +} + +stop() { + echo "$0: setup OpenStack CLI environment" + source /tmp/tacker/admin-openrc.sh + + echo "$0: uninstall vHello blueprint via CLI" + vid=($(tacker vnf-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnf-delete ${id}; done + vid=($(tacker vnfd-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnfd-delete ${id}; done +# Need to remove the floatingip deletion or make it specific to the vHello VM +# fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done + sg=($(openstack security group list|grep vHello|awk '{print $2}')) + for id in ${sg[@]}; do try 5 5 "openstack security group delete ${id}"; done +} + +forward_to_container () { + echo "$0: pass $1 command to this script in the tacker container" + CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }") + sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_VES.sh $1 $1 + if [ $? -eq 1 ]; then fail; fi +} + +dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'` +case "$1" in + setup) + setup + pass + ;; + run) + setup + forward_to_container start + pass + ;; + start|stop|collector) + if [[ $# -eq 1 ]]; then forward_to_container $1 + else + # running inside the tacker container, ready to go + $1 + fi + pass + ;; + clean) + echo "$0: Uninstall Tacker and test environment" + bash /tmp/tacker/tacker-setup.sh $1 clean + pass + ;; + *) + echo "usage: bash vHello_VES.sh [setup|start|run|clean]" + echo "setup: setup test environment" + echo "start: install blueprint and run test" + echo "run: setup test environment and run test" + echo "stop: stop test and uninstall blueprint" + echo "clean: cleanup after test" + fail +esac |